lumia 950 interop tool installation!!! 2019!! - Windows 10 Mobile

hi guys , can some one tell me how can i install interop tools on lumia 950???
- enabled developer mode on phone
-i installed it from link below
https://www.microsoft.com/en-us/p/interop-tools-store/9nj3rs1t5n68?activetab=pivotverviewtab
-then installed these
InteropTools.Providers.Registry.RegistryRTProvider.App_1.0.12.0_x86_x64_arm.appxbundle.zip
InteropTools.Providers.Registry.NDTKProvider.App_1.0.6.0_arm.appxbundle.zip
from this page
so when i go to interop tools app it ask me about "provider" with combo box including
+this device(s experimental)
+this device(through provider extensions)
+test provider
+remote device
now i donno what to choose or what to do next :|

For the Lumia 950 Phone,
Install vcREG - Follow Instructions for X50 Series on 1st Post. Should have all needed files there. I always put the checkbox in the Interop Unlock Box on Step three then reboot on step 3. Seems to always allow me to edit system level registry no issue if I do it this way.
I always install Interop Tools Legacy from here with no provider extensions. Then when you start it. Choose This Device.
If you have a Windows 10 PC, Install Interop Tools from store on it. On your phone, goto Settings and enable remote connections and make note of the port or change it to whatever you like. Check your phone network connection to get its IP. Connect your phone via USB Cable to your computer.
On your computer load up Interop Tools and Choose Remote Device. Put in your phones IP address and the port number. Now you can browse your phones registry on your computer and make changes there. It is alot easier for me.
Good Luck

use interop tools preview , i use that , in the dropdown select "this device"
u can get it from the interop tools topic by the main creator , gus33000 i think

Related

[Q] How to sync my PC with HD2(WM 7) ??

So i have searched the forum, and i saw that to hack the HD2 with WM7 on it your must install XAP, Chevron, zune bla bla bla. But i don't undersand it...
For the first step i read the Chevron topic : http://forum.xda-developers.com/showthread.php?t=857127
And performed the following steps :
1. Unzip file, and attach chevronwp7.cer (see below for file) to an e-mail to yourself
2. Open email in WP7
3. Tap attachment once, turns it into a shield, tap it again, goes to install certificate screen with white letters on black screen
4. Click install at the bottom
Now the rest steps the registry i cant find this folder "ProxyPorts" and even if i create it, the 6,7,8 steps don't work, the .exe said that the phone is not connected, and so like zune, no device detected.
What to do ? I want to sync my PC , i have 2 OS, XP SP3 and Win7 (notebook) . On wich of them to sync my phone, what are the correct steps ?
I want to upload movies, music , custom ringtones in my phone, and to upload from my HD2 my photos and videos into PC.
Please...
Tired of searching the google, the xda forum and other topics, that give abstract tips and advices...
have you installed the wp developer tools? that is suppose to edit your registry for you.
No, can you "light" me up with all the correct steps ? Please
you will have to use the win7 comp.
here is the link to the site for the tools...http://create.msdn.com/en-US/
check out this thread as it shows everything ya need to knw
http://forum.xda-developers.com/showthread.php?t=916497
I must install these : http://create.msdn.com/en-us/home/getting_started
and that's it ?
yes to be able to use the un-locker and to be able to deploy xaps...but not to use zune
god, again im confused. Usualy i understand everything, and no problems with ios, with androids , wm < 7.
I put those tools, then what unlocker and what xap ? Links maybe or something -_- thanks
well first start by installing the tools before try to do anything else.
then the unlocker allows you to unlock your device install apps, and the apps are a .xap file
http://forum.xda-developers.com/showthread.php?t=916497
There are 3 links :
http://www.youtube.com/watch?v=QolhT5LXgGo
In this video i show you how to jailbreak and sideload apps to your windows phone 7 device.
ZUNE SOFTWARE
http://www.mediafire.com/?pesqg3asdoghea3
WP7 Unlock Tools
http://www.mediafire.com/?r3cx4mfeecuieo0
Only the first ? Or all of them?
that just shows you how to do it, but have you installed the tools yet?
They are now installing on my notebook with win 7 (10 of 13) of them installed, waiting
After that i make the unlock like in the first youtube link ? or what?
yes thats correct
Oh, i installed annd WP7 unlock tools, then i connect my phone with the notebook thru usb, runnning ChevronWP7.exe, and the pc says : Sory im having trouble comm with the phone Please make sure its con with usb - please start the zune application.
What should i do ?
you have to have zune running and have you phone named and account must be main and not guest account
So, i have registered now an account on zune, and now installing zune.
What do you mean by i need to have my phone named?
ok, now i synced it, named, executed ChevronWP7.
Lets see
Ok, so i executed Tom XAP installer, and appears an error :
Unhandled exception has occured blablabla
Acces to the registry key HKEY_CLASSES_ROOT\.xap" is denied
DETAILS \\\\\\\\\\\\\\\\\ CONTINUE \\\\\\\\\\\ QUIT,
pressed continue, and then appeared a box, with a checkbox , after that i pressed X to close the window, follow in the WP7 3MktPlace folder > Downloads > and the files with .xap are not associated what should i do ?
FIXED, I opened the .xap files with the TOM XAP insaller, and then insalled them. All works well. Thank you , jasontac
Is there something i should do ? or its all about it ? now just uploading the phone with all the files i need ?
and btw how i upload for example a video file from the phone in my pc?
it is in the setting in zune, but should do it when you connect to it

WP7 Hacking for Beginners - Chevron, Theming, Ringtones, Registry, MMS/Data

Thought I would write a thread showing how to simply complete an unlock with Chevron WP7 and some common homebrew apps/tweaks for all platforms. The information is scattered and varied, but I will edit this post to be as useful as possible for beginners as a one stop source. Thanks to the following threads for info:
http://forum.xda-developers.com/showthread.php?t=857127
http://forum.xda-developers.com/showthread.php?t=907971
http://forum.xda-developers.com/showthread.php?t=924497
Unlocking with Chevron WP7
The first step to "sideloading" applications to your phone (applications not approved by Microsoft) is to developer unlock your device.
Downloads needed:
Windows Phone 7 Developer Tools (annoyingly large, but necessary)
Chevron WP7 Application, Chevron Security Certificate, Chevron Registry Entry
TCPView for Windows (don't neglect this, it saves a lot of time and is a useful utility!)
Steps for unlocking:
Install Windows Phone 7 Developer tools. This will require a reboot at the end.
Email the "ChevronWP7.cer" file to your Windows Phone 7 device.
Open the email, tap on the attachment to download it. The icon will turn into a shield, tap again to get a new dialog. Press "Install" then OK.
Put your WP7 Phone into airplane mode (Settings>Airplane mode>Slide the toggle to ON)
Double click the ChevronWP7.reg file on your computer. A prompt will open up asking if you want to write this to your registry. Press Yes to continue, then OK at the end.
Open TCPView. (tcpview.exe inside of the downloaded archive) Click on the heading marked "Local Port" until the arrow next to it is pointing up.
Look on the Local Port column for any entries labeled "HTTPS". These programs MUST be closed for Chevron to work properly. Common culprits are Skype, and XAMPP. Use Task Manager (CTRL+ALT+Delete) to ensure they are closed if you run into issues.
Connect your phone to your PC via USB cable. Open the Zune software if it is not already open, and wait for it to finish syncing.
Open your Zune software and go to the Phone page, and make SURE you don't see anything that denotes that you are in a "Guest Sync" relationship with the device. It needs to be the primary computer the phone is synced with.
Unlock your phone and leave it at the home screen. Make sure the phone does not go to sleep after this.
Open ChevronWP7.exe. It should be running as administrator. Check both boxes, and press Unlock.
Cross your fingers, and you should be up and running on a developer unlocked device! (The Unlock button will change to Relock in Chevron if this is successful)
If you receive the error "Phone is locked with a PIN", it means your phone was locked when the fix was being applied. Make sure to unlock your phone (so you can see the live tiles) BEFORE pressing the unlock button.
If the program crashes, navigate to C:\Windows\system32\Drivers\etc and right click the file named hosts and press properties. Uncheck read only and press OK, then try again.
Homebrew Applications
All homebrew applications are installed as follows:
Go to Start>Programs>Windows Phone Developer Tools> and run Application Deployment
Ensure the target is "Windows Phone 7 Device"
Browse to the .XAP that you are loading.
Connect your phone, wait for Zune sync to finish. Ensure it is not guest.
Unlock phone and keep it awake. Press "Deploy" and the application should load (not extremely fast, and will appear in your app list without a reboot when done)
If the above doesn't work, then try resetting your phone and retrying. Also, restart your computer if the problem persists.
Registry Editor
DO NOT MESS WITH THE REGISTRY UNLESS YOU KNOW WHAT YOU ARE DOING!!!
Registry Editor for all devices (also has a download for TouchXplorer - a file manager for HTC phones only): http://forum.touchxperience.com/viewtopic.php?f=20&t=593 thanks to TouchXperience user schaps for this download.
Great thread on what registry tweaks are currently known: http://forum.xda-developers.com/showthread.php?t=907971
Ringtone Installer
Instructions and XAP downloads at the following link: http://www.chevronwp7.com/post/2054291102/chevronwp7-custom-ringtone-manager
Thanks to the Chevron WP7 team for this app.
Theme Color Changer
Instructions and XAP downloads at the following link:
http://www.daveamenta.com/2011-01/change-accent-colors-on-windows-phone-7-samsung-devices/
Thanks to Dave Amenta for this great app!
Prevent Phone from Relocking
The phone is unlocked, but will relock every time it syncs to Zune unless one of these hacks are done.
Samsung Devices (also removes sideload limit, fixes MMS/data on unlocked phones!):http://forum.xda-developers.com/attachment.php?attachmentid=498084&d=1295825731 from this great thread by lyriquidperfection
All other devices:
In an installed registry editor, navigate to the following key and change these values.
Code:
[HKEY_LOCAL_MACHINE\Software\Microsoft\DeviceReg]
"PortalUrlProd"=""
"PortalUrlInt"=""
Let me know if anything should be added or if you need any help!
I just wanted to thank you again for making this. The only thing that I think would be useful would be to add links to extremely useful Registry hacks, like the power management ones for the Focus.
I try everthing but still can't unlock it again....
please make sure it is connected using usb
please start zune application
Try to reset your phone.
paullu said:
I try everthing but still can't unlock it again....
please make sure it is connected using usb
please start zune application
Click to expand...
Click to collapse
Did you already turn off your firewall during the procedure? Was a problem of mine and of a friend.
Sebo1985 said:
Did you already turn off your firewall during the procedure? Was a problem of mine and of a friend.
Click to expand...
Click to collapse
firewall off.still got the error msg
paullu said:
I try everthing but still can't unlock it again....
please make sure it is connected using usb
please start zune application
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=918710
or
http://forum.xda-developers.com/showpost.php?p=10463609&postcount=1
Sebo1985 said:
Did you already turn off your firewall during the procedure? Was a problem of mine and of a friend.
Click to expand...
Click to collapse
yes I did turn off firewall alreday.still no luck.
I unlock once and when i connect the pc again it lock again
How about MMS and Data for other non-samsung phones?
paullu said:
yes I did turn off firewall alreday.still no luck.
I unlock once and when i connect the pc again it lock again
Click to expand...
Click to collapse
did you see my post?
duhhh said:
did you see my post?
Click to expand...
Click to collapse
yes,thanks I am trying now
works for me,hope to works for you 2
HTC and LG offer utilities in their section of the marketplace for MMS/data, so just grab one of those! Samsung's utility is faulty by design to keep people from unlocking, thus the hack.
What does this mean? Is ig that samsung phones have trouble unlocking because I bought my wife a focus and I had the same error message. But I haven't tried the way posted here. So I will be trying this way and replying. Thanks!
pls help me with this: I have HTC Surround and can not sync with zune, it doesn´t start when connect the phone and if start manually it doesn´t connect and sync neither
thank you for this one. it works exactly it was described on the first page. samsung omnia 7 portugal bought phone. but using it in Turkey.
Win Phone 7 MMS settings XML
So I dont know if this helps, or if anyone a little more knowledgable than I can attack this with me but I have the XML and registry settings for MMS from my LG quantum. I have a focus and LG Quantum. My LG has the XML viewer and reg editor built right in, which I friggen love.
So I took pix of the whole xml file that should be enough info to change the profile to the right settings, with the reg keys.
At first glance here it looks like just changing a couple string values... of the key at HKCU\Software\Microsoft\ShortMsg\MMS in the ADDR string value to your MMS server would be a start. I will look further into it after work tonight. If anyone beats me to it... so be it. Just thought I would toss this out there just in case it helps.
wm.andrew.wilson said:
Thought I would write a thread showing how to simply complete an unlock with Chevron WP7 and some common homebrew apps/tweaks for all platforms. The information is scattered and varied, but I will edit this post to be as useful as possible for beginners as a one stop source. Thanks to the following threads for info:
http://forum.xda-developers.com/showthread.php?t=857127
http://forum.xda-developers.com/showthread.php?t=907971
http://forum.xda-developers.com/showthread.php?t=924497
Unlocking with Chevron WP7
The first step to "sideloading" applications to your phone (applications not approved by Microsoft) is to developer unlock your device.
Downloads needed:
Windows Phone 7 Developer Tools (annoyingly large, but necessary)
Chevron WP7 Application, Chevron Security Certificate, Chevron Registry Entry
TCPView for Windows (don't neglect this, it saves a lot of time and is a useful utility!)
Steps for unlocking:
Install Windows Phone 7 Developer tools. This will require a reboot at the end.
Email the "ChevronWP7.cer" file to your Windows Phone 7 device.
Open the email, tap on the attachment to download it. The icon will turn into a shield, tap again to get a new dialog. Press "Install" then OK.
Put your WP7 Phone into airplane mode (Settings>Airplane mode>Slide the toggle to ON)
Double click the ChevronWP7.reg file on your computer. A prompt will open up asking if you want to write this to your registry. Press Yes to continue, then OK at the end.
Open TCPView. (tcpview.exe inside of the downloaded archive) Click on the heading marked "Local Port" until the arrow next to it is pointing up.
Look on the Local Port column for any entries labeled "HTTPS". These programs MUST be closed for Chevron to work properly. Common culprits are Skype, and XAMPP. Use Task Manager (CTRL+ALT+Delete) to ensure they are closed if you run into issues.
Connect your phone to your PC via USB cable. Open the Zune software if it is not already open, and wait for it to finish syncing.
Open your Zune software and go to the Phone page, and make SURE you don't see anything that denotes that you are in a "Guest Sync" relationship with the device. It needs to be the primary computer the phone is synced with.
Unlock your phone and leave it at the home screen. Make sure the phone does not go to sleep after this.
Open ChevronWP7.exe. It should be running as administrator. Check both boxes, and press Unlock.
Cross your fingers, and you should be up and running on a developer unlocked device! (The Unlock button will change to Relock in Chevron if this is successful)
Homebrew Applications
All homebrew applications are installed as follows:
Go to Start>Programs>Windows Phone Developer Tools> and run Application Deployment
Ensure the target is "Windows Phone 7 Device"
Browse to the .XAP that you are loading.
Connect your phone, wait for Zune sync to finish. Ensure it is not guest.
Unlock phone and keep it awake. Press "Deploy" and the application should load (not extremely fast, and will appear in your app list without a reboot when done)
If the above doesn't work, then try resetting your phone and retrying. Also, restart your computer if the problem persists.
Registry Editor
DO NOT MESS WITH THE REGISTRY UNLESS YOU KNOW WHAT YOU ARE DOING!!!
Registry Editor for all devices (also has a download for TouchXplorer - a file manager for HTC phones only): http://forum.touchxperience.com/viewtopic.php?f=20&t=593 thanks to TouchXperience user schaps for this download.
Great thread on what registry tweaks are currently known: http://forum.xda-developers.com/showthread.php?t=907971
Ringtone Installer
Instructions and XAP downloads at the following link: http://www.chevronwp7.com/post/2054291102/chevronwp7-custom-ringtone-manager
Thanks to the Chevron WP7 team for this app.
Theme Color Changer
Instructions and XAP downloads at the following link:
http://www.daveamenta.com/2011-01/change-accent-colors-on-windows-phone-7-samsung-devices/
Thanks to Dave Amenta for this great app!
Prevent Phone from Relocking
The phone is unlocked, but will relock every time it syncs to Zune unless one of these hacks are done.
Samsung Devices (also removes sideload limit, fixes MMS/data on unlocked phones!):http://forum.xda-developers.com/attachment.php?attachmentid=498084&d=1295825731 from this great thread by lyriquidperfection
All other devices:
In an installed registry editor, navigate to the following key and change these values.
Code:
[HKEY_LOCAL_MACHINE\Software\Microsoft\DeviceReg]
"PortalUrlProd"=""
"PortalUrlInt"=""
Let me know if anything should be added or if you need any help!
Click to expand...
Click to collapse
Hi every memeber's and Thx for wm.andrew.wilson ; )
-I reply for your message because i still do every steps but nothing happened !!!!!
Because i relocked my WP7 .
After along nights unlocked was success ))
wm.andrew.wilson=>
- I think you miss this before doing evry thinks you must disable Lan card or Ethenet connection ...
- Then follow wm.andrew.wilson steps
- Don't worry your WP7 will not unlocked why ???
- For unlocked it you must close chevron wp7 notification
- Then enable internet connection (wlan or ethernet...)
- Reclick on chevronWP7.....and miracle
Your WP7 is UNLOCKED ENJOY .
THks for :>>>>>>>>>>> wm.andrew.wilson
Hi, I'm new here.
So I followed each step thoroughly, and when I execute 'ChevronWP7' and check off each box and click 'unlock', the program says it has stopped working.
What could be the issue?
Also:
I have the phone on the main menu
I do have all necessary programs running
Samsung re-lock prevention hack doesn't work for me
After deploying the xap it seems to take, but, my Focus is always relocked after syncing. Not a huge deal to unlock before deploying, but, thought it was worth a mention...
Edit: Nevermind. Didn't realize they're was an app on the phone to run as well... Should have read the original thread first. Sorry...

[Tutorial] Unlock your phone; prevent relock & prepare for updates!

@ Mods: I read the tutorials here on how to unlock Windows Phone 7 but most of the time I felt like there's missing some information. I know that there are already a lot of tutorials and guides but I thought it would be good to collect it a bit. If this thread is inappropriate feel free to remove it
-
Unlock your phone
[Developer unlock; ChevronWP7; Application Deployment]​
1. Check the OS version of your phone
First step is to check which OS version your phone is running as ChevronWP7 doesn't work with NoDo (or higher) update installed on your phone. Just take a look at the following page on your phone: settings > about > more information.
7.0.7004 = compatible with ChevronWP7 | No updates installed; OS version when Windows Phone 7 was launched
7.0.7008 = compatible with ChevronWP7 | Pre-NoDo update installed
7.0.7390 = not compatible with ChevronWP7 | NoDo update installed
7.0.7392 = not compatible with ChevronWP7 | NoDo update installed; certificate update for security improvement installed
7.0.7401 = not compatible with ChevronWP7 | Pre-Mango update (BETA! NOT OFFICIALLY AVAILABLE YET!) installed
7.0.7661 = not compatible with ChevronWP7 | Mango update (BETA v1! NOT OFFICIALLY AVAILABLE YET!) installed
7.10.7712 = not compatible with ChevronWP7 | Mango update (BETA v2! NOT OFFICIALLY AVAILABLE YET!) installed
7.10.7720 = not compatible with ChevronWP7 | Mango update (FINAL - FOR DEVELOPERS ONLY! NOT OFFICIALLY AVAILABLE YET!) installed
If your phone is running an imcompatible version you've to flash a ROM which hasn't got NoDo installed. Take a look at xda-developers | Forums and scroll down to your device. Enter the development section and search for a flash guide and a machting ROM file. I can't explain the process more exactly as it depends on your phone model.
2. Install Zune software
If you don't already have the Zune software on your computer, follow this link and install it: zune.net
3. Add registry entry
Now you have to add a entry to your Windows registry. ChevronWP7 will need this entry to connect to your phone. There are several methods - use only one!
Method 1:
Install Windows Phone Developer Tools RTW. The entry will automatically be added.
The setup is enourmously big but later you'll need it anyway! So I really advise you to choose this method!
Method 2:
Download this .reg-file to your hard drive and execute it. Click "Yes" in the first popup and "OK" in the second one - the entry is now added.
Method 3:
Add the entry manual: Open up the registry editor (Command: regedit.exe | Default path: "C:\Windows\regedit.exe"). Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsPhone\ProxyPorts. If the folder/key doesn't exist yet, create it. Search for the entry DeviceReg. Create it if it doesn't exist: It's a 32-bit DWORD called "DeviceReg" with this data in it:
Hexadecimal: 69c5
Decimal: 27077
4. Check "hosts" file for "developerservices.windowsphone.com" entries
Now it's best to also edit the "hosts" file. Here's what you've to do:
Open up "Notepad" (Start - All Programs - Accessories - Notepad) - It's best to right click it and press "Run as administrator" in the menu. Else it could happen that you don't have the permission to edit the file. Then click on File > Open. Now copy this line:
%windir%\system32\drivers\etc\hosts
and paste it in the line file name. Then just hit the enter key.
Now search for lines which contain developerservices.windowsphone.com. If you find such lines just remove them entirely. Finally press File > Save.
5. Install certificate on phone
Next step is to install the certificate from ChevronWP7 on your phone. The easiest way is to open up the browser on your device and type this URL into the adress bar:
db.tt/fFwKQIy
Consider the use of capitals and small initials letter!
(You don't have to install this on your computer)
After you opened the page you can see a big shield. Under the symbol there's a message saying "Press to open the file ChevronWP7.cer". Follow this instruction and confirm with install and ok.
6. Download and run ChevronWP7
To get the unlock tool follow this link and save the ChevronWP7.exe file somewhere on your hard disk. Now do the following steps:
- Connect your phone to the computer
- Wait for Zune to start up (If it doesn't start up, open it manually)
- In Zune click on the tab phone
- There you have to pay attention to two things:
- If Zune is syncing files to or from your phone just wait until it's finished
- Now check the relationship between Zune and your phone. If you can read something about a guest relationship you've to click on "Change Sync Relationship" and follow the instructions to get a full relationship.
- Keep sure that the device stays on the homescreen (where the live tiles are) for the next steps - the lockscreen mustn't be active! [Just touch the display and scroll up and down every few seconds to avoid this.]
- Run the downloaded ChevronWP7.exe and check the two boxes:
Ensure your phone isn't PIN-locked
Install certificate on phone using Internet Explorer at "http://www.chevronwp7.com/cert"
- Now finally click on the Unlock button - The button turns into Relock which means that your device is unlocked now. If this didn't work for you - with an error message coming up on your screen - try this:
Instead of using the latest version of Zune, try an older version. Here's a link where you can download version 4.7.01: Zune v4.701
Don't click the Relock button now! Just close ChevronWP7.
Leave Zune running in the background as we'll need it again in a few minutes.
Don't disconnect your device now! Continue with step 7 or your device will relock itself the next time you connect it and Zune identifies it.
7. Keep your phone unlocked
7.1 Install registry editor
As you can read above your device will be locked if you connect it again (Zune will identify your phone and lock it again). To prevent this we've to edit an entry of the phone registry:
First of all we need a registry editor for Windows Phone 7. Well, there's not a uniform way to edit registry on all devices (HTC, Samsung, ...), yet. So you have to search a registry editor which enables full registry access on your device. [I'll update this with some suggestions soon!] Then you've to open Start > All Programs > Windows Phone Developer Tools > Application Deployment on your computer. Select the downloaded .xap file (Registry Editor) and click on Deploy. Wait until the process is finished. Now disconnect your phone from the computer.
7.2 Modify the registry
Now open the Registry Editor on your phone. Now navigate to HKEY_LOCAL_MACHINE > Software > Microsoft > DeviceReg.
Now scroll to PortalUrlInt, remove its value data and save it. Do the same with PortalUrlProd. Both entries should now be "empty" (but not deleted!).
8. Installing updates
8.1 Pre-NoDo & NoDo update:
After you've followed the steps of my tutorial, you can install both the Pre-NoDo and the NoDo update without loosing the unlock.
8.2 Mango update:
There's already a BETA version of Mango out there which is intended for developers - but with some additional steps you can also install it without being a developer (and even without having a developer unlocked phone)! This update WILL REMOVE YOUR UNLOCK AND DISABLE THE USE OF HOMEBREW APPS! -> You won't be able to sideload apps anymore and you won't be able to use tools like registry editors and file explorers! Basically, if you want Mango update + jailbreak you've to prepare your phone while running NoDo (or earlier). To explain the process shortly: There are official apps which read out files information and apply changes to the phones registry. Just imagine a connection managing application which has got one file for every single provider containing informations like APN, Passwords, ... . Okay, so while you're on NoDo you can add your own files to this application - but these ones won't contain information about a provider. Instead they'll tell your phone to change several registry entries. And example would be the "Connection setup" app for HTC devices. People can add a .provxml file to the app. Then they update to Mango with loosing the developer unlock but not the file. On Mango they open up the "Connection setup" (<- You have to use this official tool - sideloaded apps won't work at that time as you're not developer unlocked yet) and can see the entry of the .provxml: There will be several networks to choose from (e.g. "T-Mobile", "Vodafone", ...) and also a entry called something like "Developer unlock". Well, this is because of the .provxml file. Then you just have to choose and run this file and the changes will apply - your phone is unlocked again! Just search and you'll find much tutorials here on how to use provxml method on HTC, Samsung, ... devices. I unlocked my Omnia 7 running Mango BETA v2 using this method.
-
Wow, you're done! Now you can connect your device to your computer without loosing the unlock.
I'll try to always improve this tutorial and keep it up to date
Please click on "Thanks" if it helped you!
Please tell me if you find something disordered or mistakes. And please be kind as this is my first tutorial Thanks ​
Excellent. I think this combines everything that was missing from other tutorials, and it is very thorough.
I'm inspired to flash my Focus and unlock it (my old one bricked).
You should add some recommended apps for post-unlock. AccentChanger, Battery Meter, Ringtone installers, Screen Capture, etc.
Thanks And my english doesn't sound too crappy?
Much luck with your Focus
WP7 root tools can used only on Samsung devices (you forgot to tell this)... better to advice different editor if you want have compete tutorial
also cert file must be sended via email to phone or upload to web and download to phone... link which you provided is old and dead....
dxdy said:
WP7 root tools can used only on Samsung devices (you forgot to tell this)... better to advice different editor if you want have compete tutorial
Click to expand...
Click to collapse
Oh thanks! I will correct it later today
dxdy said:
also cert file must be sended via email to phone or upload to web and download to phone... link which you provided is old and dead....
Click to expand...
Click to collapse
For me the link works. You have to write it correctly [it's case sensitive]. Please try again
for this link "http://www.chevronwp7.com/cert" hehehehe
hey,
if i unlock my omnia 7 with your method and before i update to NoDo. Can i update to nodo after unlock and my device is still unlock?
THX
knigge said:
hey,
if i unlock my omnia 7 with your method and before i update to NoDo. Can i update to nodo after unlock and my device is still unlock?
THX
Click to expand...
Click to collapse
yes you can update to NoDo and very possible device still be unlocked
http://forum.xda-developers.com/showthread.php?t=1101344
dxdy said:
WP7 root tools can used only on Samsung devices (you forgot to tell this)... better to advice different editor if you want have compete tutorial
Click to expand...
Click to collapse
I removed the suggestion of WP7 root tools - but there is still not a common way to modify registry which works on all devices I think I already created a thread in the Q&A section where I hope to get some help or advices
http://forum.xda-developers.com/showthread.php?p=15158977#post15158977
dxdy said:
also cert file must be sended via email to phone or upload to web and download to phone... link which you provided is old and dead....
Click to expand...
Click to collapse
Well, you can send it via email but you don't have to. I uploaded it and so the only thing to do is opening the link Well, at least I hope so. Can someone confirm that this link works if you pay attention to capitals and small initial letter? Thanks!
dxdy said:
for this link "http://www.chevronwp7.com/cert" hehehehe
Click to expand...
Click to collapse
Wow, the page has been down for a long time and now this comes up
Ok. So installed Nodo on my phone a whiile ago. Carrier stock att. Is there a way for me to downgrade and install the chevron? CUz I dont think i can downgrade.
We need to know what phone model you have (HTC HD7 for example)
i have the HTC 7 Pro with 7.0.7392 OS. i hate now to not unlock my foon!!!!!
Aren't there old ROM files for HTC 7 Pro out there?
what?/ can i install a old rom on my foon??
Did you even read my tutorial? It says that you should look into the development section of your phone here on xda-developers. There are ROMs so I think there's also a way to flash them
I bought on ebay a Omnia 7, how do i know if the person who sold me made de unlock with the ChevronWP7...is there any way to see on the phone if the ChevronWP7 is apllied.
Thanks for your great tutorial.
First of all you've to look if there's homebrew installed on the phone. Something like 'Registry editor' for example. If not I guess the easiest way is to try to deploy an app to the phone. If it works it's unlocked, if not it is locked. And if Zune tells you to update: Don't do it until you followed my tutorial
experience7 said:
First of all you've to look if there's homebrew installed on the phone. Something like 'Registry editor' for example. If not I guess the easiest way is to try to deploy an app to the phone. If it works it's unlocked, if not it is locked. And if Zune tells you to update: Don't do it until you followed my tutorial
Click to expand...
Click to collapse
I checked in my phone and i already have the 7.0.7392.0 version installed.
So now i have to downgrade to the 7.0.7004 version, install the ChevronWP7, and then i can update with zune to the last version that i still be unlocked, is that correct?
Thanks
Correct
the link to chevronwp7.exe does not work. can you have a look at it.

Get windows 10 in older lumia

DOWNLOAD&UPGRADE WINDOWS 10 IN OLDER LUMIA DEVICE
1. CHECK YOUR LUMIA 8.1.12xxxx ABOVE UPDATE
2. DOWNLOAD FOLLOWING SOFTWARE
a .WP8 SDK Tools Lite Setup Av1.0
b.XAP DEPLOYER
3.INSTALL THE SOFTWARE IN YOUR COMPUER
WP8 SDK Tools Lite - AND OPEN THIS SOFTWARE : YOUR MICROSOFT EMAIL & PASSWORD AND UNLOCK YOUR PHONE
https://forum.xda-developers.com/wi.../tutorial-deploy-xaps-easily-wpv-xap-t3263968
4.DOWNLOAD
a.CustomWPSystem
b.CustemPFD
(CustomWPSystem)https://forum.xda-developers.com/wi...p-customwpsystem-patch-xaps-wpsystem-t2975419
(CustemPFD)https://forum.xda-developers.com/wi...xap-custompfd-registry-editor-tweaks-t2981057
5.OPEN XAP DEPLOYER
INSTALL -CustomWPSystem
6.OPEN YOUR WP STORE INSTALL -"PREVIEW FOR DEVELOPER" SOFTWARE DOWNLOAD
AND MOVE TO SD-CARD
7.OPEN YOUR "CustomWPSystem" AND ALLOW PERMISSION TO SD-CARD AND SLIDE NEXT MENU
CHOOSE APP IN CustomWPSystem TARGET APP IS "PREVIEW FOR DEVELOPER" AND SLIDE
AND SELECT XAP "CustemPFD" PRESS DEPOY ONE or TWO FINALEY YOU GET MESSAGE
"DEPLOY COMPLETE" AND CLOSE THE APP
8.OPEN YOUR "PREVIEW FOR DEVELOPER" CHANGE YOUR DEVICE MODEL NAME(YOUR LUMIA RAM-1GB ,CHOOSE L 830,ETC YOUR LUMIA HAVE 512 RAM CHOOSE W10 512 RAM SUPPORTED DEVICE NAME )
HKLM-->SYSTEM-->Platform-->DeviceTargetingInfo CHANGE DEVICE MODELNAME
PhoneManufacturer : NOKIA
PhoneModelName : Lumia 830
9. CHECK UPDATE (you didn't get update for windows 10)
10. INSTALL WINDOWS INSIDER AND CHOOSE ANY RING {PREVIEW ,FAST or SLOW RING}
11.AND CHECK YOU GET WINDOWS 10 UPDATE
for x20 devices, just unlock bootloader with WP Internals, change registry, download upgrade advisor and upgrade...
Nokia Lumia Cyan WP 8.1 upgrade to WP10
Hi,
Sorry, if I were to be posting in wrong place. (?). Was searching on web & this popped up.
What registry to use (?) - "Phone Mfg" & the "Phone Model" name for phones Nokia Lumia Cyan RM-975_1005-512MB?
Build - 8.10.12397.895. Has 3.34 left over in phone and over 60+GB on SD cards.
'Offline updater' doesn't work on this model- tried many times & yes, I used only '7-zip' to extract . ' OTC updater'' does not have this model on its list & doesn't work, either - tried many times....anyhow, nothing to lose. Have 8.0, 8.1 sdk's & to used 'Deployer' & to install 0003./0005 xap files. No luck.
Btw, added 1GB temp file to phone from Win10PC, to get extra space for upgrading purposes, that I'll be deleting afterwards once downloads were to start, somehow (?) - want to install build 10586 on phone& only & stop there; as I'm aware that this phone won't probably take further updates, like 'creators update' too well. Want to make this as realistic as possible-at least have it updated to 1st version of WP10.
If it makes any difference, I'm in U.S., in case info needed for whatever........
Thank you
Still trying On 635 Cyan's
Hi, thanks for your response's.
It's been about a week, I've tried multiple times again, but the phones won't give. I've hard reset a few times , but yet no luck. I try to put in registry for the Nokia Lumia 535 also ((, to take it back for 480x800 resolution purposes - the registry won't let me change anything. I get "ops...error while writing this value" - it's like something is blocking me (M.S. now in 2018?). the phones are unlocked via the tool in W.P.internals & SDK's. I feel like I'm hitting a dead horse with a stick. Which registry, if possible of course, should I use for 635 Lumia Cyan with 512 MB? If not possible, just someone tell me, I'll simply stop trying & just throw away phones. Nothing to lose here...if it breaks, it breaks. Just toys at this point.
8/26/2018 - I gave up. It's obvious M.S. is behind this block, can't even show the phone on the screen anymore - they took away the "Project My Screen App" having a Windows phone 8.1. They've truly abandoned us.
Gokul Rajan said:
DOWNLOAD&UPGRADE WINDOWS 10 IN OLDER LUMIA DEVICE
1. CHECK YOUR LUMIA 8.1.12xxxx ABOVE UPDATE
2. DOWNLOAD FOLLOWING SOFTWARE
a .WP8 SDK Tools Lite Setup Av1.0
b.XAP DEPLOYER
3.INSTALL THE SOFTWARE IN YOUR COMPUER
WP8 SDK Tools Lite - AND OPEN THIS SOFTWARE : YOUR MICROSOFT EMAIL & PASSWORD AND UNLOCK YOUR PHONE
https://forum.xda-developers.com/wi.../tutorial-deploy-xaps-easily-wpv-xap-t3263968
4.DOWNLOAD
a.CustomWPSystem
b.CustemPFD
(CustomWPSystem)https://forum.xda-developers.com/wi...p-customwpsystem-patch-xaps-wpsystem-t2975419
(CustemPFD)https://forum.xda-developers.com/wi...xap-custompfd-registry-editor-tweaks-t2981057
5.OPEN XAP DEPLOYER
INSTALL -CustomWPSystem
6.OPEN YOUR WP STORE INSTALL -"PREVIEW FOR DEVELOPER" SOFTWARE DOWNLOAD
AND MOVE TO SD-CARD
7.OPEN YOUR "CustomWPSystem" AND ALLOW PERMISSION TO SD-CARD AND SLIDE NEXT MENU
CHOOSE APP IN CustomWPSystem TARGET APP IS "PREVIEW FOR DEVELOPER" AND SLIDE
AND SELECT XAP "CustemPFD" PRESS DEPOY ONE or TWO FINALEY YOU GET MESSAGE
"DEPLOY COMPLETE" AND CLOSE THE APP
8.OPEN YOUR "PREVIEW FOR DEVELOPER" CHANGE YOUR DEVICE MODEL NAME(YOUR LUMIA RAM-1GB ,CHOOSE L 830,ETC YOUR LUMIA HAVE 512 RAM CHOOSE W10 512 RAM SUPPORTED DEVICE NAME )
HKLM-->SYSTEM-->Platform-->DeviceTargetingInfo CHANGE DEVICE MODELNAME
PhoneManufacturer : NOKIA
PhoneModelName : Lumia 830
9. CHECK UPDATE (you didn't get update for windows 10)
10. INSTALL WINDOWS INSIDER AND CHOOSE ANY RING {PREVIEW ,FAST or SLOW RING}
11.AND CHECK YOU GET WINDOWS 10 UPDATE
Click to expand...
Click to collapse
lc12 said:
Hi, thanks for your response's.
It's been about a week, I've tried multiple times again, but the phones won't give. I've hard reset a few times , but yet no luck. I try to put in registry for the Nokia Lumia 535 also ((, to take it back for 480x800 resolution purposes - the registry won't let me change anything. I get "ops...error while writing this value" - it's like something is blocking me (M.S. now in 2018?). the phones are unlocked via the tool in W.P.internals & SDK's. I feel like I'm hitting a dead horse with a stick. Which registry, if possible of course, should I use for 635 Lumia Cyan with 512 MB? If not possible, just someone tell me, I'll simply stop trying & just throw away phones. Nothing to lose here...if it breaks, it breaks. Just toys at this point.
8/26/2018 - I gave up. It's obvious M.S. is behind this block, can't even show the phone on the screen anymore - they took away the "Project My Screen App" having a Windows phone 8.1. They've truly abandoned us.
Click to expand...
Click to collapse
First question you install the app correctly ,if you install , just forgot that quiestion
secondly change the values Lumia 550 RM-1127 just try this , didn't get it try windows 10 mobile devices and change the values
Gokul Rajan said:
DOWNLOAD&UPGRADE WINDOWS 10 IN OLDER LUMIA DEVICE
1. CHECK YOUR LUMIA 8.1.12xxxx ABOVE UPDATE
2. DOWNLOAD FOLLOWING SOFTWARE
a .WP8 SDK Tools Lite Setup Av1.0
b.XAP DEPLOYER
3.INSTALL THE SOFTWARE IN YOUR COMPUER
WP8 SDK Tools Lite - AND OPEN THIS SOFTWARE : YOUR MICROSOFT EMAIL & PASSWORD AND UNLOCK YOUR PHONE
https://forum.xda-developers.com/wi.../tutorial-deploy-xaps-easily-wpv-xap-t3263968
4.DOWNLOAD
a.CustomWPSystem
b.CustemPFD
(CustomWPSystem)https://forum.xda-developers.com/wi...p-customwpsystem-patch-xaps-wpsystem-t2975419
(CustemPFD)https://forum.xda-developers.com/wi...xap-custompfd-registry-editor-tweaks-t2981057
5.OPEN XAP DEPLOYER
INSTALL -CustomWPSystem
6.OPEN YOUR WP STORE INSTALL -"PREVIEW FOR DEVELOPER" SOFTWARE DOWNLOAD
AND MOVE TO SD-CARD
7.OPEN YOUR "CustomWPSystem" AND ALLOW PERMISSION TO SD-CARD AND SLIDE NEXT MENU
CHOOSE APP IN CustomWPSystem TARGET APP IS "PREVIEW FOR DEVELOPER" AND SLIDE
AND SELECT XAP "CustemPFD" PRESS DEPOY ONE or TWO FINALEY YOU GET MESSAGE
"DEPLOY COMPLETE" AND CLOSE THE APP
8.OPEN YOUR "PREVIEW FOR DEVELOPER" CHANGE YOUR DEVICE MODEL NAME(YOUR LUMIA RAM-1GB ,CHOOSE L 830,ETC YOUR LUMIA HAVE 512 RAM CHOOSE W10 512 RAM SUPPORTED DEVICE NAME )
HKLM-->SYSTEM-->Platform-->DeviceTargetingInfo CHANGE DEVICE MODELNAME
PhoneManufacturer : NOKIA
PhoneModelName : Lumia 830
9. CHECK UPDATE (you didn't get update for windows 10)
10. INSTALL WINDOWS INSIDER AND CHOOSE ANY RING {PREVIEW ,FAST or SLOW RING}
11.AND CHECK YOU GET WINDOWS 10 UPDATE
Click to expand...
Click to collapse
must your phone have an sd card for this to work, what do you do in the case of lumia 925

[GUIDE] Install Windows 10 mobile on a Nokia Lumia 530 (post-discontinuation friendly)

While the Nokia Lumia 530 isn’t officially supported, it’s still possible to get Windows 10 mobile running on it. At the time of writing, it has become a bit tricky to get it to work, since most official Microsoft tools are discontinued and will therefore not work. I will be linking the files which I’ve used. The credits to the people who made or shared the tools and guides I used will be at the bottom of this guide.
Note that I am not responsible for any damage made. Proceed at your own risk!
Prerequisites:
- A Nokia Lumia 530 running the Windows 8.1 Denim Update (will be referred to as "device")
- A stable Windows 7 system or VM, with .NET Framework 4.5.x or 4.6.x (on Windows 10, the IUTool will fail to synchronize, hence this requirement)
- An internet connection that can handle a download of approximately 2GB data on the computer and about the same on the phone
- A good USB cable (a flimsy one with a loose fit could brick the device while it’s updating)
- The programs linked below
First part of the installation:
1. Make sure the device is fully charged. If it’s not fully charged the device could get (soft-)bricked.
2. Factory reset the device, so you have as much storage as possible available on the device. After the reset is done, leave it at the language selection screen, because it doesn’t do anything there.
3. Extract HCTSW_WXMSOUP_V5.3beta6.update.lzma2.7z with 7zip or whatever you prefer.
4. Download the Visual C++ libraries from here: https://www.techpowerup.com/download/visual-c-redistributable-runtime-package-all-in-one/ and run the install script.
5. The next thing you are going to do is download the updates, push them to the device and install them. This will take some time, but it depends on your internet connection for the most part. The files will be downloaded from the official Microsoft servers. Now here’s what to do: open run_en.cmd and follow the steps. These are pretty clear, so I don’t think I need to point all of them out here. It will open a webpage where you can download WDRT, you will need to install that for the tool to work.
6. Now you can move on to the second part.
Second part of the installation:
In this part of the installation, you will be updating the device from version 1511 to the latest available build, which should have a working Microsoft store.
1. The setup of the device. The version that just got installed doesn’t have a lot of options yet, including language packs. If you have a device that’s not English United States, the keyboard will bug out on setup, because it’s trying to access a language pack that doesn’t exist. Therefore, the first step, setting the language should be English (United States), so the OS itself won’t bug out. Once you’ve set the language (it will prompt to reboot, do that), you can go through the rest of the setup. Don’t log it into your Wi-Fi, don’t log it into your Microsoft account and don’t turn on automatic app updates. It’ll say it needs to set up apps, that takes some time but eventually you’ll get to the home screen. Now is when you need a few tools, which brings us to step 2.
Now is a good moment for me to point out that, if you have a non-English-US device, the keyboard for another language is still "installed". It can be removed by holding it in settings -> time and language -> keyboard and choosing “Delete”.
2. Installing Interop Tools. In order to get updates, you’ll need to modify your device a bit. This won’t be very hard, but it involves some registry modifications so you’ll have to pay close attention.
Go to settings -> update and security -> for developers and enable developer mode, so you can sideload the Interop Tools (Linked below). Copy the contents of the Interop Tools zip to the device first. Then, go to the file manager on the phone and go to the directory where you put the files. INSTALL THE DEPENDENCIES IN THE \ARM FOLDER FIRST, THEN THE INTEROP TOOLS FILE ITSELF! Check if the Interop Tools installed on the “all apps screen” and get ready to open it.
3. Modifying the registry. Open Interop Tools and tap the “This Device” button. This will bring up a menu.
3.1. Tap the menu button on the top left corner, then select “Modify Registry”. In the “Registry Key Path”, put SYSTEM\Platform\DeviceTargetingInfo. Then, put PhoneManufacturerModelName in the “Registry Value Name” box and tap the “Read” button at the bottom. You’ll see some text appear in a box. This will need to be edited to the following value: RM-1089_1048. After you did that, tap the “Write” button.
3.2. Now put PhoneModelName in the the “Registry Value Name” box and tap “Read” again. Now change the value to Lumia 535 and tap “Write”.
3.3. Exit out of Interop Tools and go to the next step.
4. Logging in to the Wi-Fi and checking for updates.
4.1. Logging it in to the Wi-Fi. Go to settings -> network & wireless -> Wi-Fi and choose your network. Easy peasy probably.
4.2. Checking for updates. This is the part that always went wrong with me, because of storage limits (gotta love that 4GB eMMC). But if I’ve explained this well enough, you might not have to do a lot of weird stuff. Oh well, to the instruction we go. Go to settings -> update and security -> windows update and check for updates. This will take a while! Keep it on wall power because updating can only be done at 40% or more at this point. I got two updates: from 1511 to early 1607 and from that to late 1607. Maybe you can get a newer version with WDRT or OTC but I doubt that to be honest.
Hooray! Now you should have a fully functional Nokia Lumia 530 with Windows 10 mobile!
Credits:
nemesis from Realmtech (for the registry changes) (https://www.realmtech.net/user/1)
@hikari_calyx (for the semi-offline update tool)
@STALKER18 (for the tips on how to clear storage)
@gus33000 (for the Interop Tools)
My dad (for the device)
Everyone who encouraged me to do this mod
Files:
Interop Tools: https://forum.xda-developers.com/attachments/interoptools_rc2_1-9-400-0_arm-zip.3995811/
And it's dependencies: https://forum.xda-developers.com/attachments/dependencies_arm-zip.3995814/
Windows 10 mobile semi-offline updater: https://forum.xda-developers.com/attachments/hctsw_wxmsoup_v5-3beta6-update-lzma2-7z.4955261/
PS: If you brick the device, the WDRT can restore it. If it just puts it in flashing mode, you can use Windows Phone Internals to download and flash a ROM. That tool can be found here: https://www.wpinternals.net/index.php/downloads/doc_download/46-wpinternals-2-8-zip
[ADDITION] Updating from build 1607 to 1709.
I said it wouldn’t be possible and it would break stuff, but I tried it and it doesn’t break anything some people say it might break. Yeah, it might impact on battery life a bit, but nothing has broken for me (yet), it has only improved.
I’ve learned that the update from 1607 to 1703 is the hardest one yet, but you should be able to get it going. This is because the preinstalled Store in 1607 can connect to the app update servers, but it can’t view the app. This is a difficult situation because many apps will become very large when they get updated. You need to figure out for yourself what gets you the space you need, but I found that uninstalling all the apps that can be uninstalled and deleting system apps through MTP (which can be done by bootloader unlocking, rooting and booting into mass storage mode with Windows Phone Internals (I recommend that you only delete OneNote, SkyDrive (as it’s being referred to in /data/program files/windowsapps) and the Xbox app).
Step 0: you might want to factory reset first
Let’s get to the updating though…
1. Modifying the registry. Open Interop Tools and tap the “This Device” button. This will bring up a menu.
1.1. Tap the menu button on the top left corner, then select “Modify Registry”. In the “Registry Key Path”, put SYSTEM\Platform\DeviceTargetingInfo. Now do the exact same as you did before, except use these “registry value names” and put the corresponding information into the box below that. Don’t forget to tap write!
Values you should use:
PhoneHardwareVariantRM-1104PhoneManufacturerMicrosoftMDGPhoneManufacturerModelNameRM-1104_11210PhoneModelNameLumia 950
1.2. Exit out of Interop Tools and go to the next step.
2. Logging in to the Wi-Fi and checking for updates.
2.1. Logging it in to the Wi-Fi. Go to settings -> network & wireless -> Wi-Fi and choose your network. Easy peasy probably.
2.2. Checking for updates. Go to settings -> update and security -> Windows Update and check for updates. This will take a while! Keep it on wall power because updating can only be done at 40% or more at this point. I got 3 updates, one from 1607 to 1703, one from 1703 to 1709 and another one from old 1709 to last 1709.
Credit to @demon2112 for the registry values
Can you backup your efiesp.bin partition and share?
augustinionut said:
Can you backup your efiesp.bin partition and share?
Click to expand...
Click to collapse
Did you break it?
Edit: WPInternals refuses to put the phone in mass storage mode so uh... Yeah...
I managed to get them off with Interop Tools
How?
augustinionut said:
How?
Click to expand...
Click to collapse
In the Interop Unlock menu, there's a mount entire storage option. Copied the EFIESP from there and compiled it into a bin. For WPI the Windows on the phone is too new :/
Thats why didnt worked
I wanted dumped partition with, WPInternals.
augustinionut said:
Thats why didnt worked
I wanted dumped partition with, WPInternals.
Click to expand...
Click to collapse
Yeah that doesn't work. Rename the .bin to .zip, extract, mount the phone in mass storage mode and copy the files to the EFIESP folder/symlink. If you can't do that, WDRT can probably unbreak it
Please anounce me when you can upload the dumped partition.
Is resulting that efiesp.bin , data.bin and mainos.bin are related, so i cant upgrade my phone to windows 10 mobile without them.
augustinionut said:
Is resulting that efiesp.bin , data.bin and mainos.bin are related, so i cant upgrade my phone to windows 10 mobile without them.
Click to expand...
Click to collapse
Just flash the original FFU. Literally all I did is in the guide and I never had to flash something from another device
Thanks, but: my phone was reflashed with reset protection active. Guess what?
augustinionut said:
Thanks, but: my phone was reflashed with reset protection active. Guess what?
Click to expand...
Click to collapse
Something that might work (according to a friend. Again, I am not responsible for a phone that gets rendered useless)
Mount as mass storage, diskpart clean the thing, hold power button for ~10 seconds, flash a bootloader with WDRT (may fail 2-3 times), flash FFU
_Yep, erase clean DPP partition )) buhahahaha
How do you get to the Denim update? I'm getting the error that I am running a build older than 8.10.14219.341 and need to update first.
EirikrHinnRauthi said:
How do you get to the Denim update? I'm getting the error that I am running a build older than 8.10.14219.341 and need to update first.
Click to expand...
Click to collapse
You can download and flash it in WPInternals (will delete all data so back that up first) or WDRT (not sure if that erases userdata)
BennoMP said:
You can download and flash it in WPInternals (will delete all data so back that up first) or WDRT (not sure if that erases userdata)
Click to expand...
Click to collapse
WDRT already says I'm at the latest version of Windows for my device, so that sucks. I shall try WPInternals! Thanks!
Would you please transfer a video of the process?
BennoMP said:
While the Nokia Lumia 530 isn’t officially supported, it’s still possible to get Windows 10 mobile running on it. At the time of writing, it has become a bit tricky to get it to work, since most official Microsoft tools are discontinued and will therefore not work. I will be linking the files which I’ve used. The credits to the people who made or shared the tools and guides I used will be at the bottom of this guide.
Note that I am not responsible for any damage made. Proceed at your own risk!
Prerequisites:
- A Nokia Lumia 530 running the Windows 8.1 Denim Update (will be referred to as "device")
- A stable Windows 7 system or VM, with .NET Framework 4.5.x or 4.6.x (on Windows 10, the IUTool will fail to synchronize, hence this requirement)
- An internet connection that can handle a download of approximately 2GB data on the computer and about the same on the phone
- A good USB cable (a flimsy one with a loose fit could brick the device while it’s updating)
- The programs linked below
First part of the installation:
1. Make sure the device is fully charged. If it’s not fully charged the device could get (soft-)bricked.
2. Factory reset the device, so you have as much storage as possible available on the device. After the reset is done, leave it at the language selection screen, because it doesn’t do anything there.
3. Extract HCTSW_WXMSOUP_V5.3beta6.update.lzma2.7z with 7zip or whatever you prefer.
4. Download the Visual C++ libraries from here: https://www.techpowerup.com/download/visual-c-redistributable-runtime-package-all-in-one/ and run the install script.
5. The next thing you are going to do is download the updates, push them to the device and install them. This will take some time, but it depends on your internet connection for the most part. The files will be downloaded from the official Microsoft servers. Now here’s what to do: open run_en.cmd and follow the steps. These are pretty clear, so I don’t think I need to point all of them out here. It will open a webpage where you can download WDRT, you will need to install that for the tool to work.
6. Now you can move on to the second part.
Second part of the installation:
In this part of the installation, you will be updating the device from version 1511 to the latest available build, which should have a working Microsoft store.
1. The setup of the device. The version that just got installed doesn’t have a lot of options yet, including language packs. If you have a device that’s not English United States, the keyboard will bug out on setup, because it’s trying to access a language pack that doesn’t exist. Therefore, the first step, setting the language should be English (United States), so the OS itself won’t bug out. Once you’ve set the language (it will prompt to reboot, do that), you can go through the rest of the setup. Don’t log it into your Wi-Fi, don’t log it into your Microsoft account and don’t turn on automatic app updates. It’ll say it needs to set up apps, that takes some time but eventually you’ll get to the home screen. Now is when you need a few tools, which brings us to step 2.
Now is a good moment for me to point out that, if you have a non-English-US device, the keyboard for another language is still "installed". It can be removed by holding it in settings -> time and language -> keyboard and choosing “Delete”.
2. Installing Interop Tools. In order to get updates, you’ll need to modify your device a bit. This won’t be very hard, but it involves some registry modifications so you’ll have to pay close attention.
Go to settings -> update and security -> for developers and enable developer mode, so you can sideload the Interop Tools (Linked below). Copy the contents of the Interop Tools zip to the device first. Then, go to the file manager on the phone and go to the directory where you put the files. INSTALL THE DEPENDENCIES IN THE \ARM FOLDER FIRST, THEN THE INTEROP TOOLS FILE ITSELF! Check if the Interop Tools installed on the “all apps screen” and get ready to open it.
3. Modifying the registry. Open Interop Tools and tap the “This Device” button. This will bring up a menu.
3.1. Tap the menu button on the top left corner, then select “Modify Registry”. In the “Registry Key Path”, put SYSTEM\Platform\DeviceTargetingInfo. Then, put PhoneManufacturerModelName in the “Registry Value Name” box and tap the “Read” button at the bottom. You’ll see some text appear in a box. This will need to be edited to the following value: RM-1089_1048. After you did that, tap the “Write” button.
3.2. Now put PhoneModelName in the the “Registry Value Name” box and tap “Read” again. Now change the value to Lumia 535 and tap “Write”.
3.3. Exit out of Interop Tools and go to the next step.
4. Logging in to the Wi-Fi and checking for updates.
4.1. Logging it in to the Wi-Fi. Go to settings -> network & wireless -> Wi-Fi and choose your network. Easy peasy probably.
4.2. Checking for updates. This is the part that always went wrong with me, because of storage limits (gotta love that 4GB eMMC). But if I’ve explained this well enough, you might not have to do a lot of weird stuff. Oh well, to the instruction we go. Go to settings -> update and security -> windows update and check for updates. This will take a while! Keep it on wall power because updating can only be done at 40% or more at this point. I got two updates: from 1511 to early 1607 and from that to late 1607. Maybe you can get a newer version with WDRT or OTC but I doubt that to be honest.
Hooray! Now you should have a fully functional Nokia Lumia 530 with Windows 10 mobile!
Credits:
nemesis from Realmtech (for the registry changes) (https://www.realmtech.net/user/1)
@hikari_calyx (for the semi-offline update tool)
@STALKER18 (for the tips on how to clear storage)
@gus33000 (for the Interop Tools)
My dad (for the device)
Everyone who encouraged me to do this mod
Files:
Interop Tools: https://forum.xda-developers.com/attachments/interoptools_rc2_1-9-400-0_arm-zip.3995811/
And it's dependencies: https://forum.xda-developers.com/attachments/dependencies_arm-zip.3995814/
Windows 10 mobile semi-offline updater: https://forum.xda-developers.com/attachments/hctsw_wxmsoup_v5-3beta6-update-lzma2-7z.4955261/
PS: If you brick the device, the WDRT can restore it. If it just puts it in flashing mode, you can use Windows Phone Internals to download and flash a ROM. That tool can be found here: https://www.wpinternals.net/index.php/downloads/doc_download/46-wpinternals-2-8-zip
Click to expand...
Click to collapse
Hello! I followed your step with editing values and after checking updates, there was an update which is Windows 10 Mobile (10.0.14393.1066) as of now, May 2022.
my question is what is the size of this update? and will I able to install this with my Lumia 530?
any other way to install this offline? i really need this update because I need working Microsoft Store.
Thanks...

Categories

Resources