Galaxy Note II Download Mode Issue - AT&T Samsung Galaxy Note II

Good Afternoon, guys!
I have a issue with my Galaxy Note II, i was trying to install original firmware by Odin but unfortunately it didn't work. Odin had error all the time. I tried all of the methods which i found on forum all time my phone was stacked at "Downloading Mode...Do not turn off target". Also i found solution with TWRP and i tried to install TWRP by odin, so it kinda works i had a message that i passed but now for some reason i can't access to download mode at all :crying:
So my question is, how i can access to download mode to make recover?
And anybody know how i can make recovery with bricked phone? i was trying all of the firmware and it didnt work :crying:
Please help, hope you understand what i meant.

Related

[HELP]Unfinished Firmware Flash Via Odin

hello i need your help as soon as possible i was flashing my galaxy tab 3 sm-t210 firmware via odin and then suddenly it stopped and unrecognized the device it says i need kies to fis it in the emergency recovery in the kies i need the code that was given when the firmware flashing stopped via kies but i didnt flashed via kies please help me i need a code or a fix please help
aaronjasper49 said:
hello i need your help as soon as possible i was flashing my galaxy tab 3 sm-t210 firmware via odin and then suddenly it stopped and unrecognized the device it says i need kies to fis it in the emergency recovery in the kies i need the code that was given when the firmware flashing stopped via kies but i didnt flashed via kies please help me i need a code or a fix please help
Click to expand...
Click to collapse
can you still get to download mode?
if so just re-download the firmware and flash with odin
ermmanuel said:
can you still get to download mode?
if so just re-download the firmware and flash with odin
Click to expand...
Click to collapse
the message that said to conect via pc using kies it is downloada mode i tried going to odin again but odin cant detect
woahhh
aaronjasper49 said:
hello i need your help as soon as possible i was flashing my galaxy tab 3 sm-t210 firmware via odin and then suddenly it stopped and unrecognized the device it says i need kies to fis it in the emergency recovery in the kies i need the code that was given when the firmware flashing stopped via kies but i didnt flashed via kies please help me i need a code or a fix please help
Click to expand...
Click to collapse
You can just flash it again, try another computer, i HIGHLY recommended win 7 or xp, run odin "as administartor" mode
****make sure samsung usb driver is installed properly in your comouter****
Is my reply helping you?
ikhsaricky said:
You can just flash it again, try another computer, i HIGHLY recommended win 7 or xp, run odin "as administartor" mode
****make sure samsung usb driver is installed properly in your comouter****
Is my reply helping you?
Click to expand...
Click to collapse
can i have your pit file in your SM-T210?
As long as it can enter recovery mode and can be recognized, do a STOCK ROM FLASH (USE THE CLEAN METHOD OF FLASHING). Now attempt to do that flash again..
An image/screenshot of the problem might help us to help you.
aaronjasper49 said:
can i have your pit file in your SM-T210?
Click to expand...
Click to collapse
Aw, im using smt311, but flashing with odinnis the simole way,, did yiu finish it?
same thing happened to my t217s when Samsung didn't do anything for a legit issue with my tablet during an OTA update and stated that it was rooted (it has been stock since out of the box). after many attempts (didn't have another computer available) i switched to a different usb port and got it flashed just fine.
hi can i ask something it happened i flash samsung j1 then suddenly in 90percent was cut and i cant go back to download mode. and the phone turn black and cant connect to pc. Can Please can you help me?
I had a similar situation with a Galaxy SM-T113 here in Canada. I was hammering away at it for about 4 days with no luck. All i got was the "use Kies" to fix it message. Kies would not detect my phone though. Anyway what i did that worked was in part already tried earlier.. I already tried for example using a different cable and a different port. And i always got a failure with Odin and attempting the stock firmware flash.
So what did i do ?
I unplugged my Gamepad i keep plugged in 24/7 thinking maybe i had too many USB devices hogging USB port bandwidth.. maybe that was it I don't know.. I also uninstalled Kies but this time i said yes to installing the unified driver it asks you about. I also changed to yet another USB port.
It was working fine before hand.
I was trying to flash the firmware simply to reset the thing like i have done on countless other devices over the years.
I am not new to this sort of thing and was rather surprised to see Odin fail.
So who knows maybe my post here will help others.
I feel relieved i did not brick a perfectly good device. LOL

[Q] Bricked my Tab S 8.4 T700

Hello,
I managed to brick my tablet.
Initially the tablet was locked in recovery mode (ODIN mode), so looking at this tutorial on youtube "galaxy tab s 8.4 stuck on odin mode how to fix", I followed the steps but since the link of the recovery-mj6.tar file was dead I found somewhere else another one with the same name and size (attached), loaded it in Odin 3.09, message was that recovery was successful but I am stuck at Samsung Logo screen, no way to get out of here, the device is not seen by my computer / Odin now.
Any ideas?
solved it finally,
calin1975 said:
Hello,
I managed to brick my tablet.
Initially the tablet was locked in recovery mode (ODIN mode), so looking at this tutorial on youtube "galaxy tab s 8.4 stuck on odin mode how to fix", I followed the steps but since the link of the recovery-mj6.tar file was dead I found somewhere else another one with the same name and size (attached), loaded it in Odin 3.09, message was that recovery was successful but I am stuck at Samsung Logo screen, no way to get out of here, the device is not seen by my computer / Odin now.
Any ideas?
Click to expand...
Click to collapse
3 buttons restart and reflash TWRP recovery
calin1975 said:
3 buttons restart and reflash TWRP recovery
Click to expand...
Click to collapse
Might even flash stock and start over rooting....just a thought.
calin1975 said:
Hello,
I managed to brick my tablet.
Initially the tablet was locked in recovery mode (ODIN mode), so looking at this tutorial on youtube "galaxy tab s 8.4 stuck on odin mode how to fix", I followed the steps but since the link of the recovery-mj6.tar file was dead I found somewhere else another one with the same name and size (attached), loaded it in Odin 3.09, message was that recovery was successful but I am stuck at Samsung Logo screen, no way to get out of here, the device is not seen by my computer / Odin now.
Any ideas?
Click to expand...
Click to collapse
Im on the same page. Waiting for some ideas. Tried to install stock again, twrp and the youtube solucion. Nothing works.
How about using Kies device recovery with the serial number option?
Sent from my SM-T705 using Tapatalk

Boot loop

Hello all, I could use some help with the note 10.1 I traded for this because it should be fixable. Right now it only boots to the note screen then reboots. I can get it to download mode but no recovery mode. I have downloaded the firmware from samfirmware so far no luck after flashing it with Odin. The model is sm-p605v I am hoping someone has another idea or someway to flash it to stock so I can just use it.
Thanks alot everyone

I need help with my samsung tab s 10.5

Hi i need help with my tab s 10.5, the wifi and bluetooth stopped working and i seen on this site that i might need to do a update so i downloaded one and tried to install it, but around 95% complete it failed and then when i turned the tab on it said somthing about firmware update failed and recover wi kies. I then tried another update and all i get when the tab turns on is the sound it makes when coming on and see the samsung logo but thats all i get and the logo wont go away. What have i done wrong and could someone please point me in the right direction. thanks in advance.
that's what is called a bootloop.
You will need the Odin tool to re-flash your stock firmware.
Just search on this forum section for Odin and bootloop and you will get everything you need : )

Samsung SGH-T999 bricked due to wrong CF-auto-root.tar file

Hello dear,
this is my first post, so please spare my little knowledge,
the problem is i have a T-mobile Samsung S-III SGH-T999 which was working fine, one day it stop booting and stuck on
Samsung galaxy logo. I have to recover my files. so i try to root the same from a thread on xdadeelopers
i end up to a state in odin mode and a triangle saying "Firmware upgrade encountered an issue. please select recovery mode in
Kies & try again."
i think what i did wrong is that i used a wrong CF-Auto-Root.tar file which was for SGH-T999V-4.4.2
whereas i have SGH-T999 on 4.3 OS.
now i can only go to download mode but when i try to write something with odin it stuck on initialization
kies did not detect any thing but keep on searching the device.
can someone help me!....................
Thanks in anticipation.
mahtabkhan27 said:
Hello dear,
this is my first post, so please spare my little knowledge,
the problem is i have a T-mobile Samsung S-III SGH-T999 which was working fine, one day it stop booting and stuck on
Samsung galaxy logo. I have to recover my files. so i try to root the same from a thread on xdadeelopers
i end up to a state in odin mode and a triangle saying "Firmware upgrade encountered an issue. please select recovery mode in
Kies & try again."
i think what i did wrong is that i used a wrong CF-Auto-Root.tar file which was for SGH-T999V-4.4.2
whereas i have SGH-T999 on 4.3 OS.
now i can only go to download mode but when i try to write something with odin it stuck on initialization
kies did not detect any thing but keep on searching the device.
can someone help me!....................
Thanks in anticipation.
Click to expand...
Click to collapse
any help?.........

Categories

Resources