[Q] Firmware upgrade encountered an issue.Select recovery mode in Kies & try againn
Hey guys i just got my Galaxy s 3 tonight and I came home and tried to root it.I was in Odin. I selected PDA, selected the tar file and tried to root. It started then said "fail." I tried to restart but I'm stuck at a screen saying "firmware upgrade encountered an issue. please select recovery mode in kies and try again." I am using a Rogers Galaxy S3 in Canada. All I'm seeing on my screen is "firmware upgrade encountered an issue. please select recovery mode in kies and try again." At the top left it says:
ODIN MODE
PRODUCT NAME: SGH-I747M
CUSTOM BINARY DOWNLOAD: Yes (1 counts)
SYSTEM STATUS: Official
QUALCUM SECUREBOOT: ENABLE
Just for giggles, plug your phone into Odin on that screen. If it recognizes it (blue com box lights up), use that screen as download mode. But, i would download your file again, making sure to get the one for the I747M.
Really?
mrhaley30705 said:
Just for giggles, plug your phone into Odin on that screen. If it recognizes it (blue com box lights up), use that screen as download mode. But, i would download your file again, making sure to get the one for the I747M.
Click to expand...
Click to collapse
Would that actually work cuz im stuck in the same situation... and i just got my tab today after repairs. and i dont wanna screw it up again cuz of parents so im just gonna give it a try to see if it works
Help
Has no one solved this issue yet? I just encountered it also I'm on t-mobile.
jdz7t8 said:
Hey guys i just got my Galaxy s 3 tonight and I came home and tried to root it.I was in Odin. I selected PDA, selected the tar file and tried to root. It started then said "fail." I tried to restart but I'm stuck at a screen saying "firmware upgrade encountered an issue. please select recovery mode in kies and try again." I am using a Rogers Galaxy S3 in Canada. All I'm seeing on my screen is "firmware upgrade encountered an issue. please select recovery mode in kies and try again." At the top left it says:
ODIN MODE
PRODUCT NAME: SGH-I747M
CUSTOM BINARY DOWNLOAD: Yes (1 counts)
SYSTEM STATUS: Official
QUALCUM SECUREBOOT: ENABLE
Click to expand...
Click to collapse
If you can get your device back into download mode, you could relay the stock firmware from www.stockbroker.net. Select the file you downloaded under pda in Odin and flash it. Hope this helps. You can try to root again from there.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Upgraded to 4.1.1 even after soft-brick !
Soft-brick aka " firmware upgrade encountered an issue " - screen in galaxy s3 sgh-i747 is a warning bell that somehow device might get interrupted while updating firmware , now i tried twice with old odin , and twice with new odin , what you got to do is just keep on trying and make sure that your galaxy s3 SGH-i747 drives are installed then after restart your pc , tried kies already , just waste of times , wasted 2 hours yet that official software didnt help me to upgrade or recover my device !
Finally i executed Odin 3.7 ( run as admin ) then --> ticked box : auto reboot , F. reset time ! upload that Firmware upgrade of Jelly bean in PDA section and wait till it gets loaded then press start ! ( i had to do this 3 times n then it worked , so dont lose the hope , keep trying over and over again ) and it will take 6~7 minutes as new OS is big around 1 GB ! so dont unplug device and ur done , then after completion , cellphone will restart with new settings and new OS !
---------- Post added at 03:14 AM ---------- Previous post was at 03:07 AM ----------
Dezzy87 said:
Has no one solved this issue yet? I just encountered it also I'm on t-mobile.
Click to expand...
Click to collapse
Read my general opinion in this thread , and find compatible ROM for T-mobile and it will work with new Odin 3.7 !
Has no one solved this issue yet?
I can't do anythiing with mi S3... not responding yet
macuruso said:
Has no one solved this issue yet?
I can't do anythiing with mi S3... not responding yet
Click to expand...
Click to collapse
can you get into download mode
jdz7t8 said:
Hey guys i just got my Galaxy s 3 tonight and I came home and tried to root it.I was in Odin. I selected PDA, selected the tar file and tried to root. It started then said "fail." I tried to restart but I'm stuck at a screen saying "firmware upgrade encountered an issue. please select recovery mode in kies and try again." I am using a Rogers Galaxy S3 in Canada. All I'm seeing on my screen is "firmware upgrade encountered an issue. please select recovery mode in kies and try again." At the top left it says:
ODIN MODE
PRODUCT NAME: SGH-I747M
CUSTOM BINARY DOWNLOAD: Yes (1 counts)
SYSTEM STATUS: Official
QUALCUM SECUREBOOT: ENABLE
Click to expand...
Click to collapse
i have the same error (firmware upgrade encountered an issue. please select recovery mode in kies and try again) on my Samsung Galaxy Tab 2 10.1 but i dont have this
ODIN MODE
PRODUCT NAME: SGH-I747M
CUSTOM BINARY DOWNLOAD: Yes (1 counts)
SYSTEM STATUS: Official
QUALCUM SECUREBOOT: ENABLE
I cant get my tablet in download or recovery, Kies doesnt recognise my tablet either? what do i do? please if someone has solved it plz plz plz tell me
Also when i plug my tablet into my PC i get "USB device not recognised" how do i fix that too?
akshar102 said:
Soft-brick aka " firmware upgrade encountered an issue " - screen in galaxy s3 sgh-i747 is a warning bell that somehow device might get interrupted while updating firmware , now i tried twice with old odin , and twice with new odin , what you got to do is just keep on trying and make sure that your galaxy s3 SGH-i747 drives are installed then after restart your pc , tried kies already , just waste of times , wasted 2 hours yet that official software didnt help me to upgrade or recover my device !
Finally i executed Odin 3.7 ( run as admin ) then --> ticked box : auto reboot , F. reset time ! upload that Firmware upgrade of Jelly bean in PDA section and wait till it gets loaded then press start ! ( i had to do this 3 times n then it worked , so dont lose the hope , keep trying over and over again ) and it will take 6~7 minutes as new OS is big around 1 GB ! so dont unplug device and ur done , then after completion , cellphone will restart with new settings and new OS !
---------- Post added at 03:14 AM ---------- Previous post was at 03:07 AM ----------
Read my general opinion in this thread , and find compatible ROM for T-mobile and it will work with new Odin 3.7 !
Click to expand...
Click to collapse
Im going to try this again and again I have the same screen on my verizon galaxy note 2 that I WAS trying to unlock for t mo and just went about it the wrong way. My screen says the same ol Firmware upgrade encountered an issue...... I CAN get into Odin to upload a firmware and IT DOES recognize the phone BUT no matter what firmware I try nothing works its stuck in the same mode. I think I have looked at all available videos and threads on this but nothing :crying: should I keep tryong to flash the rom or just give up? Any more help is appreciated thanks!
djcnote562 said:
Im going to try this again and again I have the same screen on my verizon galaxy note 2 that I WAS trying to unlock for t mo and just went about it the wrong way. My screen says the same ol Firmware upgrade encountered an issue...... I CAN get into Odin to upload a firmware and IT DOES recognize the phone BUT no matter what firmware I try nothing works its stuck in the same mode. I think I have looked at all available videos and threads on this but nothing :crying: should I keep tryong to flash the rom or just give up? Any more help is appreciated thanks!
Click to expand...
Click to collapse
This is for the S3, flashing it's firmware on the Note 2 won't work. I highly suggest you go on the Note 2 section.
I found a fix for this problem
jdz7t8 said:
Hey guys i just got my Galaxy s 3 tonight and I came home and tried to root it.I was in Odin. I selected PDA, selected the tar file and tried to root. It started then said "fail." I tried to restart but I'm stuck at a screen saying "firmware upgrade encountered an issue. please select recovery mode in kies and try again." I am using a Rogers Galaxy S3 in Canada. All I'm seeing on my screen is "firmware upgrade encountered an issue. please select recovery mode in kies and try again." At the top left it says:
ODIN MODE
PRODUCT NAME: SGH-I747M
CUSTOM BINARY DOWNLOAD: Yes (1 counts)
SYSTEM STATUS: Official
QUALCUM SECUREBOOT: ENABLE
Click to expand...
Click to collapse
1)Download this file www.mediafire.com/?bbfsnnub9gzg5wj
2)Go into download mode
3) connect your device to the computer and run ODIN as an administrator
4)Open the file and click start
5) Your phone should reboot
6) if your phone gets in a boot loop you need to download the latest firmware for your device
I hope this could help you, if the instructuions were unclear, send me a message and i will do my best to help you!
Re: [Q] Firmware upgrade encountered an issue.Select recovery mode in Kies & try agai
1)Download this file www.mediafire.com/?bbfsnnub9gzg5wj
2)Go into download mode
3) connect your device to the computer and run ODIN as an administrator
4)Open the file and click start
5) Your phone should reboot
6) if your phone gets in a boot loop you need to download the latest firmware for your device
I hope this could help you, if the instructuions were unclear, send me a message and i will do my best to help you!
Sent from my GT-P5113 using xda app-developers app
Download cwm-touch-i717-120414.tar.md5
Connect to Odin.
Once Odin Recognizes/connects to your phone.
Download Clockwork: (Download cwm-touch-i717-120414.tar.md5)
Choose PDA and browse to the file and click Start on Odin.
Your Phone should now Reboot correctly.
Make sure you download the correct "new MOD" for your phone.
ManUYSC said:
Connect to Odin.
Once Odin Recognizes/connects to your phone.
Download Clockwork: (Download cwm-touch-i717-120414.tar.md5)
Choose PDA and browse to the file and click Start on Odin.
Your Phone should now Reboot correctly.
Make sure you download the correct "new MOD" for your phone.
Click to expand...
Click to collapse
How any pages did you go back to find this thread? It literally has sat, answered and untouched for close to 2 months
it worked
man it worked used the error screen as download mode and it reflashed with even all my settings awesome .... thanks
use one of the $8 dongles. supersimple
cheers
ManUYSC said:
Connect to Odin.
Once Odin Recognizes/connects to your phone.
Download Clockwork: (Download cwm-touch-i717-120414.tar.md5)
Choose PDA and browse to the file and click Start on Odin.
Your Phone should now Reboot correctly.
Make sure you download the correct "new MOD" for your phone.
Click to expand...
Click to collapse
You are my hero! Ignore that little girl beneath your post, I'm glad you took the time to post the solution.
Ainol novo 8 discover flashing firmware error
Sir i have ainol novo 8 discover it has a problem that when i install firmware files on my discover with firmware tool there have a problem is data.img file cant install on my tblet software shows WRITE DATA PARTITION FAILED..and u can see screen shot also plzzzz help me what i do.plzz thanks in advance.
Hey,
I have Note 2 (GT-N7100) its primary market is Europe. i was using it and it suddenly stucks and after sometime it restarted with this error "Firmware upgrade encountered an issue. connect to kies select recovery mode and try again" I have just bought it and it happened . i Have tried to resolve it through odin mode because recovery mode is not opening. it is only going in download mode ... I downloaded it and used odin to put it on my phone. It says successful but after restart same error remains. kies isn't detecting my device. I'm an absolute noob when it comes to this stuff. In odin it says [Successful] but problem does not go. Help me resolving this problem.
Thanks.
Download the stock firmware it's about 1gb file flash with Odin pc using stock use cable will fix the pro lem
Sent from my GT-N7100 using xda premium
Firmware updrade encountered a problem error {SOLUTION}
Muaaz Khalid said:
Hey,
I have Note 2 (GT-N7100) its primary market is Europe. i was using it and it suddenly stucks and after sometime it restarted with this error "Firmware upgrade encountered an issue. connect to kies select recovery mode and try again" I have just bought it and it happened . i Have tried to resolve it through odin mode because recovery mode is not opening. it is only going in download mode ... I downloaded it and used odin to put it on my phone. It says successful but after restart same error remains. kies isn't detecting my device. I'm an absolute noob when it comes to this stuff. In odin it says [Successful] but problem does not go. Help me resolving this problem.
Thanks.
Click to expand...
Click to collapse
Hey just download siyah kernel and flash it with odin by connecting your device and then you will easily get into download mode.
amrinder146 said:
Hey just download siyah kernel and flash it with odin by connecting your device and then you will easily get into download mode.
Click to expand...
Click to collapse
There is no Siyah kernel for Note 2. I hope you didn't say that on purpose...
galaxy tab pro 12.2 got a problem tried to install twrp recovery with odin and now cant get off the start screen I cant get in to recovery the only thing it will let me do is get in to downloader mode help needed . I CAN STILL CONNECT TO ODIN
chealyjazz said:
galaxy tab pro 12.2 got a problem tried to install twrp recovery with odin and now cant get off the start screen i cant get in to recovery the only thing it will let me do is get in to downloader mode help needed . I can still connect to odin
Click to expand...
Click to collapse
fixed thanks
Guys sorry for posting this here but I'm really desperate and I need your help. I flashed 4.2.2 firmware on GT i9082 and I forgot to check the "F reset " button on Odin.The firmware flashed to completion and I saw the"pass" message. However the phone cannot boot now and the Samsung logo goes on and off when I try to boot the phone. When I boot into download mode it shows something like this "current eMMc version !!!!!!!!" in red color. I tried flashing the same firmware via Odin but it fails and says "no pit partition".The firmware is a single md5.I'm unable to enter into recovery mode either so I cannot perform a hard reset. Is the phone hard bricked? Please help I'm really desperate. Thanks
umaga2012 said:
Guys sorry for posting this here but I'm really desperate and I need your help. I flashed 4.2.2 firmware on GT i9082 and I forgot to check the "F reset " button on Odin.The firmware flashed to completion and I saw the"pass" message. However the phone cannot boot now and the Samsung logo goes on and off when I try to boot the phone. When I boot into download mode it shows something like this "current eMMc version !!!!!!!!" in red color. I tried flashing the same firmware via Odin but it fails and says "no pit partition".The firmware is a single md5.I'm unable to enter into recovery mode either so I cannot perform a hard reset. Is the phone hard bricked? Please help I'm really desperate. Thanks
Click to expand...
Click to collapse
did you put the .pit file?
I flashed a file with a single package through PDA
Sent from my GT-I8190 using XDA Free mobile app
Good Afternoon, guys!
I have a issue with my Galaxy Note II, i was trying to install original firmware by Odin but unfortunately it didn't work. Odin had error all the time. I tried all of the methods which i found on forum all time my phone was stacked at "Downloading Mode...Do not turn off target". Also i found solution with TWRP and i tried to install TWRP by odin, so it kinda works i had a message that i passed but now for some reason i can't access to download mode at all :crying:
So my question is, how i can access to download mode to make recover?
And anybody know how i can make recovery with bricked phone? i was trying all of the firmware and it didnt work :crying:
Please help, hope you understand what i meant.