Hi i need help with my tab s 10.5, the wifi and bluetooth stopped working and i seen on this site that i might need to do a update so i downloaded one and tried to install it, but around 95% complete it failed and then when i turned the tab on it said somthing about firmware update failed and recover wi kies. I then tried another update and all i get when the tab turns on is the sound it makes when coming on and see the samsung logo but thats all i get and the logo wont go away. What have i done wrong and could someone please point me in the right direction. thanks in advance.
that's what is called a bootloop.
You will need the Odin tool to re-flash your stock firmware.
Just search on this forum section for Odin and bootloop and you will get everything you need : )
Related
Hi everybody,
I tried to root my tablet with Odin but at the end something get wrong and now it doesn't get on correctly.
When I turn it on, the message "Samsung galaxy tab 3 10.1" appears but it stays locked on these screen.
I'm a beginner with these things and that's why I need your help.
If I get it right, I should put back a recovery but I tried with one find on these forum and it didn't worked.
Can somebody help me?
Thank you very much
Clem1500
Ps : sorry for the English but it's not my first language.
Hello All,
i was given a Samsung S4 mini i9195 and it keeping restarting from the Samsung logo. i have also booted up the phone in recovery mode and try to flash the original firmware via odin and it fails toward the end. any help to get this phone back up and running would be much appreciated. i've looked around the forum for the similar issue and i seen a few recommendations such as flashing a pit file etc etc. but not sure if that would help my issue out or make my phone worse then what is it now.
thanks in advaced.
Bert
Hello,
Ive got an:
Samsung Tab Pro 10.1 - SM-T510 WiFi version
I installed CM12 on my tablet but my girlfriend was complaining about the tv remote control function... So what i was trying to do is putting back the original firmware but somewhere i did do something terrible wrong.
The battery was complete empty... so ive tryed to put it on and at startup its giving me this screen error.
http://s24.postimg.org/6cz8zp1px/tap.jpg
''Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.''
Then ive downloaded Odin 3.07 and tryed it also with version 3.10 to install the new Firmware's:
* T520XXUANI1_T520PHNANI1_HOME.tar.md5
and also tryed
* T520XXUANAE_T520PHNANA2_HOME.tar.md5
and the
* CF-Auto-Root-picassowifi-picassowifixx-smt520.tar
But then ODIN is stuck at this screen.
http://s17.postimg.org/p9h2bap33/Odin.jpg
''boot.img''
Also tryed it through KIES but kies doesnt connect to the tablet.
And also installed the samsung USB drivers.
Even booting in TEAMWIN doesnt work anymore...
Also if i try to power on the tab without a cable connected it wont go on
What can i do to fix my problem ?
This Tab Pro section does not get an lot of posts, so you might have to wait a while for an answer, or you can go to the Tab S thread and ask them your questions about ODIN, the method is the same for both tablets, just don't flash an Tab S rom
I have an Tab S and not an Tab Pro, but i have loads of post in this section, I just don't know much about flashing rom`s , I know you have to boot into download mode so ODIN can start the rom update.
http://forum.xda-developers.com/galaxy-tab-s/help
John.
I normally find a way around some android issues but sort of lost this time so iI need some help please!
Tablet is (was?) rooted and running cm12 plus twarp before the issue. It was running fine other than using a lot of battery.
So after replacing a battery my Note 8 N5110 started a boot loop and sometimes TWARP starts but does not work and it gets back to the boot loop!
I tried first re-load TWARP via odin and it passed but it was still in the bootloop so I tried load the stock firmware via Odin and I am getting failed with a
I have attached a picture of Twarp right before it fails, a picture of Odin with a failed attempt to load the stock firmware and the message I get on the Note 8 custom firmware screen.
Thanks in advance!!!
For the record I found a way out, the only thing that worked on my case was initialize the Tab using Samsung KIES.
Awesome software thanks Samsung, it saved my day and now....back to root and CM13 again
Hello glad you got it working. is it hard to replace the battery in these?
Good Afternoon, guys!
I have a issue with my Galaxy Note II, i was trying to install original firmware by Odin but unfortunately it didn't work. Odin had error all the time. I tried all of the methods which i found on forum all time my phone was stacked at "Downloading Mode...Do not turn off target". Also i found solution with TWRP and i tried to install TWRP by odin, so it kinda works i had a message that i passed but now for some reason i can't access to download mode at all :crying:
So my question is, how i can access to download mode to make recover?
And anybody know how i can make recovery with bricked phone? i was trying all of the firmware and it didnt work :crying:
Please help, hope you understand what i meant.