Related
hi guys.
I have been looking around and trying different cases, however i always end up looking at the official Double Dip htc Hard case, as it looks to be the best one .
Just wondering about the case, asking the people who have used it. I always use Xtremeguard/Invisibleshield wet application screen protectors on my htc One. i wanted to know if the case is compatible with screen protectors? because i have come to experience some cases making the protector peel off.
any responses will be appreciated.
dshf231 said:
Thanks you very much news, I think the screen protector HTC phone accessories very good, very clear, and does not give Lewis a bad cell phone traces remain under the protection membrane cleaning can still continue to use the , is a very good accessories
Click to expand...
Click to collapse
Thanks for the reply. But I didn't understand what you said
Sent from my HTC One using Tapatalk 2
Some screen protectors work, some don't.
From my experience, skinomi and just a generic matte screen protector did not work with the case, but I'm using a gadget shieldz now and it works
absolutely right
bought this cover 2 days ago, unfortunately top (red) part of cover - when applied will peel off screen cover
this because gap for front camera eye, actually bottom side of this hole.
screen protector - nothing special - something from phones4u for 8 pounds
any idea?
wojtas29 said:
absolutely right
bought this cover 2 days ago, unfortunately top (red) part of cover - when applied will peel off screen cover
this because gap for front camera eye, actually bottom side of this hole.
screen protector - nothing special - something from phones4u for 8 pounds
any idea?
Click to expand...
Click to collapse
I'd say get a "wet" screen protector as they can bend into shape. That's what mine has done, instead of peeling off because of the front camera it molded itself around it. Hope that makes sense
ButtSwag said:
I'd say get a "wet" screen protector as they can bend into shape. That's what mine has done, instead of peeling off because of the front camera it molded itself around it. Hope that makes sense
Click to expand...
Click to collapse
Hmm wet screen protector?
You mean apply drop of water on screen protector before ?
wojtas29 said:
Hmm wet screen protector?
You mean apply drop of water on screen protector before ?
Click to expand...
Click to collapse
Yeah the screen protectors that need to be wet or have the screen wet before being applied
They're also easier to apply because you can take them off again and re-apply. The only ones I know of are gadget shieldz or skinomi
Has anyone tried putting on the HTC Double Dip case with a Ghost Armor screen protector?
kist32 said:
colors HTC Double Dip Hard Shell Case
Click to expand...
Click to collapse
YOU HAVE NO IDEA HOW GLAD I AM YOU POSTED THIS LINK. Literally just bought so many.
Sent from my One using Tapatalk 4
bpcivicsi said:
YOU HAVE NO IDEA HOW GLAD I AM YOU POSTED THIS LINK. Literally just bought so many.
Sent from my One using Tapatalk 4
Click to expand...
Click to collapse
I wouldn't trust that much third party DD cases, i mean, even the HTC ones are doing scratches.
Desiredrive said:
I wouldn't trust that much third party DD cases, i mean, even the HTC ones are doing scratches.
Click to expand...
Click to collapse
I have Zagg front and back so no worries :thumbup:
Sent from my One using Tapatalk 4
Ok
I bought protector for wet apply.
Now what i have to do just wear cover stright after protektor applied or
Wait 15 minutes for adhesive drying?
bpcivicsi said:
I have Zagg front and back so no worries :thumbup:
Sent from my One using Tapatalk 4
Click to expand...
Click to collapse
woah that sounds good, i ordered my double dip (dunno if its really genuine since i ordered it from ebay / Honk Kong haha) and i was kind of dissapointed because of reviews and stuff even before it arrives, now i'll try it with those.
Desiredrive said:
woah that sounds good, i ordered my double dip (dunno if its really genuine since i ordered it from ebay / Honk Kong haha) and i was kind of dissapointed because of reviews and stuff even before it arrives, now i'll try it with those.
Click to expand...
Click to collapse
I just received mine that I ordered off ebay /Hong Kong as well. It's pretty nice. I've removed it a couple of times already to see if it scratches and no it hasn't. I just made sure before I first put it on to clean/scrape the inside of any excess plastic.
Sent from my HTC One using xda premium
wojtas29 said:
Ok
I bought protector for wet apply.
Now what i have to do just wear cover stright after protektor applied or
Wait 15 minutes for adhesive drying?
Click to expand...
Click to collapse
I'd wait for about a day for it to settle and everything. Apply the screen protector before you sleep and then put the case on when you wake up.
Are wet application type screen protectors the only ones that are compatible with the Double Dip case?
I would feel more comfortable knowing that the screen is protected but I am not a fan of the grippy texture that Zagg usually has. But if it's the only one that works then beggars can't really be choosers.
Edit: Decided to go with the Zagg Invisible Shield. It actually isn't as bad as it used to be. I'm really satisfied with my purchase.
^_^
Manufacturer: Cruzerlite
Case: Bugdroid Circuit (Nexus 5)
Color: Black
Description (summary of the cruzerlite description): Shock absorbent and scratch resistant thermoplastic premium polyurethane case with custom designed Android print on the back.
Overall impression and build quality: The build quality of this case is excellent. The best i've seen so far. The case itself is glossy whereas the back has some some kind of a soft touch surface with an Android print.
Cutouts: All cutouts are on the right place with the right dimension. You still have the click-response when you press the power button or the volume rocker. The power button feels more solid with the case. At the beginning it might be a little bit unusual for you to press the buttons because the case is a little bit higher than the button itself. In my opinion it feels much better with the case.
Screen protector compatibility: Yes, this case might lift up your screen protector if you don't adjust your screen protector precisely. It depends on your screen protector though. I've had that problem but fixed it with a few adjustments of the screen protector.
Headphone jack: All of my headphones are compatible with this case. The headphone jack cutout seems to be big enough.
I would definitely buy it again. It looks just amazing!
If you've questions don't hesitate to ask me
antiker1 said:
Manufacturer: Cruzerlite
Case: Bugdroid Circuit
Color: Black
Description (summary of the cruzerlite description): Shock absorbent and scratch resistant thermoplastic premium polyurethane case with custom designed Android print on the back.
Overall impression and build quality: The build quality of this case is excellent. The best i've seen so far. The case itself is glossy whereas the back has some some kind of a soft touch surface with an Android print.
Cutouts: All cutouts are on the right place with the right dimension. You still have the click-response when you press the power button or the volume rocker. The power button feels more solid with the case. At the beginning it might be a little bit unusual for you to press the buttons because the case is a little bit higher than the button itself. In my opinion it feels much better with the case.
Screen protector compatibility: Yes, this case might lift up your screen protector if you don't adjust your screen protector precisely. It depends on your screen protector though. I've had that problem but fixed it with a few adjustments of the screen protector.
Headphone jack: All of my headphones are compatible with this case. The headphone jack cutout seems to be big enough.
I would definitely buy it again. It looks just amazing!
If you've questions don't hesitate to ask me
Click to expand...
Click to collapse
This one looks cool. might pick one up for my replacement nexus 5.
I like it but I don't use it that much anymore. I was caseless for about a month and I never came close to dropping my phone once. After day 1 I dropped the phone for the first time with the case on. It's a bit slippery. I find the phone itself naked is very grippy. The black N5 at least. So I use the case when I want to set the phone down on its back. So I don't scratch the rim around the camera lens. Don't get me wrong the case protects the phone good, I just think the natural form of the phone is easier to handle.
augoza said:
I like it but I don't use it that much anymore. I was caseless for about a month and I never came close to dropping my phone once. After day 1 I dropped the phone for the first time with the case on. It's a bit slippery. I find the phone itself naked is very grippy. The black N5 at least. So I use the case when I want to set the phone down on its back. So I don't scratch the rim around the camera lens. Don't get me wrong the case protects the phone good, I just think the natural form of the phone is easier to handle.
Click to expand...
Click to collapse
when you have a three year old, you need protection.
right. i'm driving with the subway and bus every day and need some kind of protection for my investment. i'm always on the run. and i don't think the case is too slippery. but thats just my opinion.
Sent from my Nexus 7 using xda app-developers app
NJ_RAMS_FAN said:
when you have a three year old, you need protection.
Click to expand...
Click to collapse
For sure. Also, you need protection before you have a 3yo
Great cases. With great drop test ratings.
Sent from my Nexus 5 using Tapatalk 2
augoza said:
For sure. Also, you need protection before you have a 3yo
Click to expand...
Click to collapse
Haha. Nah. It was planned. Got another one on the way.
Sent from my Nexus 5 using xda app-developers app
got my case yesterday. With a spigen screen protector, it didn't lift it. So far, I'm happy..
NJ_RAMS_FAN said:
got my case yesterday. With a spigen screen protector, it didn't lift it. So far, I'm happy..
Click to expand...
Click to collapse
great to read that. so as you can see, it's really worth the money
How well does this case cover the bezel and edges?
I returned the rearth fusion because it didn't cover the bezels and felt loose m
Sent from my Nexus 5 using XDA Premium 4 mobile app
_jordan_ said:
How well does this case cover the bezel and edges?
I returned the rearth fusion because it didn't cover the bezels and felt loose m
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
in my case, pretty good. here are a few more pictures ...
Are the buttons fairly easy to press? I have the popular Nexus 5 Casemate case, which is also a TPU case with button cutouts. But, the power button was and remains sort of a pain, as it's recessed a bit too far from the outer surface of the case.
floepie said:
Are the buttons fairly easy to press? I have the popular Nexus 5 Casemate case, which is also a TPU case with button cutouts. But, the power button was and remains sort of a pain, as it's recessed a bit too far from the outer surface of the case.
Click to expand...
Click to collapse
do you mean the case-mate naked tough clear slim case or the one from casology ?
i'd say it depends on the thickness of your fingers and the way you press the buttons. in case of the power button ... for me it's not like i press the button itself. it's more like i apply a litte bit of pressure on the case with my thumb to press the power button. since the button itself is surrounded by the case on all sides, only the middle area of my thumb goes down to the power button. if i press it like that, i get a louder click as response.
antiker1 said:
do you mean the case-mate naked tough clear slim case or the one from casology ?
Click to expand...
Click to collapse
Oh, yeah I meant the one from caseology. That casemate naked case has covered buttons if I'm not mistaken.
antiker1 said:
i'd say it depends on the thickness of your fingers and the way you press the buttons. in case of the power button ... for me it's not like i press the button itself. it's more like i apply a litte bit of pressure on the case with my thumb to press the power button. since the button itself is surrounded by the case on all sides, only the middle area of my thumb goes down to the power button. if i press it like that, i get a louder click as response.
Click to expand...
Click to collapse
OK, I have pretty fine fingers, so seems like it shouldn't be a problem.
Did any one here get the cyanogenMod one?
joelmic said:
Did any one here get the cyanogenMod one?
Click to expand...
Click to collapse
I bought it, colour teal. I still have to get it
Inviato dal mio Nexus 5 utilizzando Tapatalk
What's the difference between a $1.00 tpu case on ebay? I don't see the difference...
Cruzerlite CyanogenMod teal is very very beautiful
Sent from my Google Nexus 5 [DroidKang v19]
AI0LIA said:
Cruzerlite CyanogenMod teal is very very beautiful
Sent from my Google Nexus 5 [DroidKang v19]
Click to expand...
Click to collapse
pictures ?
looks like a case with good drop protection
http://www.ebay.com/itm/AMZER-BLACK...L-/121649568822?ssPageName=ADME:B:BOC:US:1123
This one is great!!! http://m.ebay.com/itm/281684193800?varId=580689263837&txnId=1374093401018
bloodomen2 said:
looks like a case with good drop protection
http://www.ebay.com/itm/AMZER-BLACK...L-/121649568822?ssPageName=ADME:B:BOC:US:1123
Click to expand...
Click to collapse
I just got this case yesterday, I ordered on May 5th and I received it on May 13th. Very fast shipping from US to Canada. Case looks and fits nicely, the edges are glossy but the back of the case has a nice matte finish with that "Amzer" logo. As for drop protection, It would probably survive, but keep in mind that the case is very thin (about 1 mm thick on all sides). It's not like an Otterbox case, but I prefer these types of thinner cases.
These are one of the nicest ones available right now besides the generic unbranded tpu cases, and I'm also waiting for this one to come in the mail: http://www.ebay.ca/itm/C1-NILLKIN-N...t=LH_DefaultDomain_0&var=&hash=item35e86b1904
I ordered this case a couple of days ago and will be making a quick review on it as soon as I get it via YouTube. I feel like there's a lack of cases or information on this phone and I want to contribute.
Sent from my ASUS_Z00AD using XDA Free mobile app
lordpipa said:
This one is great!!! http://m.ebay.com/itm/281684193800?varId=580689263837&txnId=1374093401018
Click to expand...
Click to collapse
i dont like the generic rugged cases their materials feels too cheap and flimsy
i usually buy UAG cases for my devices
KevOne said:
I just got this case yesterday, I ordered on May 5th and I received it on May 13th. Very fast shipping from US to Canada. Case looks and fits nicely, the edges are glossy but the back of the case has a nice matte finish with that "Amzer" logo. As for drop protection, It would probably survive, but keep in mind that the case is very thin (about 1 mm thick on all sides). It's not like an Otterbox case, but I prefer these types of thinner cases.
These are one of the nicest ones available right now besides the generic unbranded tpu cases, and I'm also waiting for this one to come in the mail: http://www.ebay.ca/itm/C1-NILLKIN-N...t=LH_DefaultDomain_0&var=&hash=item35e86b1904
Click to expand...
Click to collapse
dose it at least have a lip to protect the screen ?
i ordered a nillkin glass screen protector but i usually also match it with a case that have a decent lip
the bigger they are the harder they fall :laugh:
i might also order that nillkin tpu from the link for a try... dust plugs are a nice addition
bloodomen2 said:
dose it at least have a lip to protect the screen ?
i ordered a nillkin glass screen protector but i usually also match it with a case that have a decent lip
the bigger they are the harder they fall :laugh:
i might also order that nillkin tpu from the link for a try... dust plugs are a nice addition
Click to expand...
Click to collapse
Yes, it does have a lip that covers that entire phone, it keeps the screen at least 1 mm off the ground when you put it face it down. And yeah, I can't wait for that Nillkin case, it covers everything on the phone from the headphone jack, volume buttons and charging port. Everything except the camera
bloodomen2 said:
dose it at least have a lip to protect the screen ?
i ordered a nillkin glass screen protector but i usually also match it with a case that have a decent lip
the bigger they are the harder they fall :laugh:
i might also order that nillkin tpu from the link for a try... dust plugs are a nice addition
Click to expand...
Click to collapse
I have this case, which I feel matches the nillkin tempered glass screen protector very well. (looks like they may be OOS for the ZF2)
I received the Amzer case two days back. I'm not too happy with the case and wouldn't recommend it to anyone.
The pros are...
1. It covers all the sides and has a lip the protects the screen.
2. The buttons have neat cutouts.
3. The back is a nice Matt finish.
The cons are...
1. The case is slightly loose on the lower side near the USB port.
2. The sides have an unfinished sharp edge running across all 4 sides. This spoils the feel of the case when you hold it in your fingers.
3. Glossy sides spoil the look and make it look cheap.
4. On two sides there's a small extrusion that looks like an unfinished factory flaw from the moulding process.
In the past I have used TPU cases from vendors like Diztronic and I have to say the quality of those cases was way better. For the price Amzer is charging for this case they should have delivered a quality product.
I got this case from eBay UK:
http://www.ebay.co.uk/itm/301580146391?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
And I can recommend it. Cutouts are good, it's slim but still just overhangs the screen to protect it. In fact, you hardly notice it when it's on.
bloodomen2 said:
dose it at least have a lip to protect the screen ?
i ordered a nillkin glass screen protector but i usually also match it with a case that have a decent lip
the bigger they are the harder they fall :laugh:
i might also order that nillkin tpu from the link for a try... dust plugs are a nice addition
Click to expand...
Click to collapse
I have the Nillkin TPU Nature case. I really like the feel and keeps the device feeling slim. The dust plugs are nice, and the power button is easier to use with the case on.
alose said:
I have the Nillkin TPU Nature case. I really like the feel and keeps the device feeling slim. The dust plugs are nice, and the power button is easier to use with the case on.
Click to expand...
Click to collapse
I received mine today. It has already become my favorite of four cases I have received thus far (Nilkin, Amzer, Sparin, Einzige).
alose said:
I have the Nillkin TPU Nature case. I really like the feel and keeps the device feeling slim. The dust plugs are nice, and the power button is easier to use with the case on.
Click to expand...
Click to collapse
So this case covers the buttons on the phone? All the other cases just leave a cutout, which i imagine would make them hard to press.
cmendonc2 said:
So this case covers the buttons on the phone? All the other cases just leave a cutout, which i imagine would make them hard to press.
Click to expand...
Click to collapse
Yes the case covers the buttons, and are easy to press. The power button is actually easier then without a case.
I have another TPU case and has cutouts. The volume buttons are still accessible with that one, but the power button is a real pain to press.
just received the nillkin tpu case
very nice case for the price its well built barely adds any bulk and provide decent protection
The original Asus case seems good, with textured finish that should give good grip:
http://www.bhphotovideo.com/c/product/1147172-REG/asus_90xb00ra_bsl2n0_bumper_case_for_zenfone.html
I haven't ordered it yet, but so far is my first consideration. It seems better than other cheap TPU cases I've looked at. as most of them seem to have a smooth finish and seem slippery. I also don't like the "shiny" look most of these TPU cases have.
I ordered this one grey
For ASUS ZenFone 2 ZE551ML ZE550ML Dual Layer Plastic And Silicone Case For ZenFone2 5.5INCH Armor Hybrid Combo Phone Case
http://www.aliexpress.com/item/For-...ne-Case-For-ZenFone2-5-5INCH/32362634172.html
(from AliExpress Android)
onesky said:
I ordered this one grey
For ASUS ZenFone 2 ZE551ML ZE550ML Dual Layer Plastic And Silicone Case For ZenFone2 5.5INCH Armor Hybrid Combo Phone Case
http://www.aliexpress.com/item/For-...ne-Case-For-ZenFone2-5-5INCH/32362634172.html
(from AliExpress Android)
Click to expand...
Click to collapse
Sweet....looks like a non-spigen made slim armor....just might be what i need!
Honestly this is the best looking case i ever used. This cover is soft matte case and well build. Especially cloth back is very comfortable feeling and looks durable.
Product Link
Real world photos attached in below.
onurdroid said:
Honestly this is the best looking case i ever used. This cover is soft matte case and well build. Especially cloth back is very comfortable feeling and looks durable.
Real world photos attached in below.
Click to expand...
Click to collapse
the cover is indeed elegant. but why is there a half eaten fruit in one of the pictures
sachin273 said:
the cover is indeed elegant. but why is there a half eaten fruit in one of the pictures
Click to expand...
Click to collapse
Because my phone hasn't capable of take own pictures
Sent from my Mi A1 using Tapatalk
onurdroid said:
Because my phone hasn't capable of take own pictures
Sent from my Mi A1 using Tapatalk
Click to expand...
Click to collapse
It's overal a good case
dejano said:
It's overal a good case
Click to expand...
Click to collapse
Totally, worth to buy.
Sent from my Mi A1 using Tapatalk
tempered glass link please
pdas142 said:
tempered glass link please
Click to expand...
Click to collapse
+1
Xander_90 said:
+1
Click to expand...
Click to collapse
I bought it from local store so i can't share any link, sorry. No branding on the product box.
onurdroid said:
Honestly this is the best looking case i ever used. This cover is soft matte case and well build. Especially cloth back is very comfortable feeling and looks durable.
Product Link
Real world photos attached in below.
Click to expand...
Click to collapse
Which tempered glass are you using on your phone?
Nickinfinity said:
Which tempered glass are you using on your phone?
Click to expand...
Click to collapse
Like i said, i bought it from local store man. No branding on box. Just labeled "nano glass screen protector". It's noticeable thin any other glass screen protectors.
But, this case i mentioned in first post came with screen protector like I'm using right now. Highly recommended.
Sent from my Mi A1 using Tapatalk
I ordered it from Aliexpress, its really awesome!
onurdroid said:
Honestly this is the best looking case i ever used. This cover is soft matte case and well build. Especially cloth back is very comfortable feeling and looks durable.
Product Link
Real world photos attached in below.
Click to expand...
Click to collapse
Dropped in to say thanks, ordered, this is gonna go fine with my wallet
pdas142 said:
tempered glass link please
Click to expand...
Click to collapse
I found this "glass". In fact, this is not glass, it's a thick film. However, it states on "glass" at the manufacturer's website.
Here is the link: https://aliexpress.com/item/-/32841803367.html
And here is proof it is not a glass: https://youtu.be/Bj8k5_MptJM?t=4m54s
Osmatic said:
I found this "glass". In fact, this is not glass, it's a thick film. However, it states on "glass" at the manufacturer's website.
Here is the link: https://aliexpress.com/item/-/32841803367.html
And here is proof it is not a glass: https://youtu.be/Bj8k5_MptJM?t=4m54s
Click to expand...
Click to collapse
As per manufacturer - Type:Front Film
And again - "...Glass Screen Protector..". so it is protector for glass screens....
Honestly why would you get gorilla glass screen in the first place if you want to put on some plastic on it?
Gorilla glass has enough scratch protection and if you plan to abuse your phone then this is not the type of phone in the first place. The film type screen protectors drop protection has always been controversial and questionable.
It's like getting a new car and putting some clothes on it to not scratch the paint and to not chip the windshield...
It's the question of "refreshness". You put $2-3 glass on top of Gorilla (which is not so scratch-resistable in fact) and trash it after 3-5 month, got new glass and fresh new screen. In case of no protector the only option you have is new LCD assembly at $50? (or fake china "compatible" LCD with poor colors and backlight). According to the fact that 3-layer glass (original gorilla+silicone adhesive+protective glass) will be definitely stronger comparison to LCD only, that's the reason to choose.
But i agree with you, >$200 phone is not the price you'll have to put a case in a case while in carrying pouch to protect it like a treasure.
I got the same case. Very nice quality. The only thing I don't like is the rough inside surface. Hopefully it won't scuff the back of the phone. It also seems slightly thicker than my other plain black case.
Got the same case good quality. Cloth back solves the problem that the bare phone is SUPER slippery and will slide off a perfectly flat surface.
Are there any problems with pressing side buttons and plugging earphones?
https://www.aliexpress.com/item/Xiaomi-Mi-A1-case-cover-mi5x-back-cover-silicone-edge-fabric-shockproof-case-coque-MOFi-original/32853695069.html
I wonder how that compares to it.
How are the buttons with this case, I have one from silicon as well and they are really hard to press.
Hi guys
Has anyone found a nice slim case that offers excellent protection all round that they would recommend and that also works with a tempered glass?
Please do share pics, links or suggestions.
Thanks
---account closed
langster- said:
just ordered 2 they were $1.95 each LOL - not sure how good they will be.
Ebay Name: Luxury Ultra Thin Soft TPU Matte Rubber Back Case Cover For Xiaomi Redmi 5 Plus
I will let you know how they are in 6 months when they arrive from China
View attachment 4503009
View attachment 4503010
View attachment 4503011
View attachment 4503012
Click to expand...
Click to collapse
Looks good & thanks for sharing, will await your experience.
Just hope it doesnt actually take 6 months lol :fingers-crossed:
antares* said:
Looks good & thanks for sharing, will await your experience.
Just hope it doesnt actually take 6 months lol :fingers-crossed:
Click to expand...
Click to collapse
the black case came yesterday and it is perfect, highly recommended.
it has nicer cutouts and a nicer feel in hand than the jelly one that came with it.
it kinda feels like holding the phone with no case and fits perfectly snug.
maybe a bit slippery but i hated that sticky tpu jelly poop :good::fingers-crossed:
I ordered this one yesterday. Spigen has always served me best
Spigen Liquid Air Case
I've bought original xiaomi case , but it doesnt cover the glass at the bottom of screen.
http://s.aliexpress.com/naIb6bmy
langster- said:
the black case came yesterday and it is perfect, highly recommended.
it has nicer cutouts and a nicer feel in hand than the jelly one that came with it.
it kinda feels like holding the phone with no case and fits perfectly snug.
maybe a bit slippery but i hated that sticky tpu jelly poop :good::fingers-crossed:
Click to expand...
Click to collapse
That's good to hear in terms of its fit, on the rear is it a bit raised by the camera module and in the front for the screen for protection? Are you using a tempered glass with it? Thanks :good:
rockhardy said:
I ordered this one yesterday. Spigen has always served me best
Spigen Liquid Air Case
Click to expand...
Click to collapse
Spigen are well known and have nice cases, practical and safe. Do share your experience once you received it
---account closed
rockhardy said:
I ordered this one yesterday. Spigen has always served me best
Spigen Liquid Air Case
Click to expand...
Click to collapse
Case arrived today. I love how it fits perfectly. It has a very nice texture at the back for extra grip. The power and volume buttons are very tactile. The lips are raised enough to protect the screen very well. The fingerprint scanner cutout is designed beautifully that your finger just slides over it.
I have bought this Nilkin Hard Case for my Redmi 5 Plus, superb quality and it fits absolutely perfect to the device.
Nillkin Frosted Shield - https://www.amazon.de/dp/B0792Y7FXG/ref=cm_sw_r_cp_apa_i_Iu5bBbBEVV3EW
rockhardy said:
Case arrived today. I love how it fits perfectly. It has a very nice texture at the back for extra grip. The power and volume buttons are very tactile. The lips are raised enough to protect the screen very well. The fingerprint scanner cutout is designed beautifully that your finger just slides over it.
Click to expand...
Click to collapse
While using it with tempered glass i get bubbles in the screen guard. Do you recommend using it with tempered glass?
prab2112 said:
While using it with tempered glass i get bubbles in the screen guard. Do you recommend using it with tempered glass?
Click to expand...
Click to collapse
I don't think tempered glass would fit perfectly with thos case. As this case edges are very close to the display leaving little to no space at all. You can use tempered glass or plastic screen protector that does not cover the whole glass.
I am sharing some pictures for you to see how it fits on the phone.
rockhardy said:
I don't think tempered glass would fit perfectly with thos case. As this case edges are very close to the display leaving little to no space at all. You can use tempered glass or plastic screen protector that does not cover the whole glass.
I am sharing some pictures for you to see how it fits on the phone.
Click to expand...
Click to collapse
Thank you very much. I am using a 5D tempered glass , so for a while i will use the silicon one which came with the phone.
prab2112 said:
Thank you very much. I am using a 5D tempered glass , so for a while i will use the silicon one which came with the phone.
Click to expand...
Click to collapse
Any difference between the 5D tempered glass over the normal tempered glass? Is it any good? Do share some pics of it
Thanks
antares* said:
Any difference between the 5D tempered glass over the normal tempered glass? Is it any good? Do share some pics of it
Thanks
Click to expand...
Click to collapse
I didn't find any difference apart from it's curved so it covers curves at edges. Looks something like this :
Link
I'm using this one, really happy with it so far (had it for a month), good vol and power buttons, nice fell too..
Cafele TPU Case for Xiaomi Redmi 5 Plus Matte
Half a year using this, perfect case, thin and light:
https://www.gearbest.com/cases-leather/pp_1611581.html?wid=1433363#goodsDetail
Klaus69 said:
Half a year using this, perfect case, thin and light:
https://www.gearbest.com/cases-leather/pp_1611581.html?wid=1433363#goodsDetail
Click to expand...
Click to collapse
Matted finish? Does it scratch easily?
Klaus69 said:
Half a year using this, perfect case, thin and light:
https://www.gearbest.com/cases-leather/pp_1611581.html?wid=1433363#goodsDetail
Click to expand...
Click to collapse
Can you share some real photos of your phone with this cover on..??
Sudhangshu said:
Can you share some real photos of your phone with this cover on..??
Click to expand...
Click to collapse
No, because i have no other camera to take a photo of my phone, but trust me, the cover is perfect.
Ah and it's easy to read the reviews on site, they photos also.