hi guys.
I have been looking around and trying different cases, however i always end up looking at the official Double Dip htc Hard case, as it looks to be the best one .
Just wondering about the case, asking the people who have used it. I always use Xtremeguard/Invisibleshield wet application screen protectors on my htc One. i wanted to know if the case is compatible with screen protectors? because i have come to experience some cases making the protector peel off.
any responses will be appreciated.
dshf231 said:
Thanks you very much news, I think the screen protector HTC phone accessories very good, very clear, and does not give Lewis a bad cell phone traces remain under the protection membrane cleaning can still continue to use the , is a very good accessories
Click to expand...
Click to collapse
Thanks for the reply. But I didn't understand what you said
Sent from my HTC One using Tapatalk 2
Some screen protectors work, some don't.
From my experience, skinomi and just a generic matte screen protector did not work with the case, but I'm using a gadget shieldz now and it works
absolutely right
bought this cover 2 days ago, unfortunately top (red) part of cover - when applied will peel off screen cover
this because gap for front camera eye, actually bottom side of this hole.
screen protector - nothing special - something from phones4u for 8 pounds
any idea?
wojtas29 said:
absolutely right
bought this cover 2 days ago, unfortunately top (red) part of cover - when applied will peel off screen cover
this because gap for front camera eye, actually bottom side of this hole.
screen protector - nothing special - something from phones4u for 8 pounds
any idea?
Click to expand...
Click to collapse
I'd say get a "wet" screen protector as they can bend into shape. That's what mine has done, instead of peeling off because of the front camera it molded itself around it. Hope that makes sense
ButtSwag said:
I'd say get a "wet" screen protector as they can bend into shape. That's what mine has done, instead of peeling off because of the front camera it molded itself around it. Hope that makes sense
Click to expand...
Click to collapse
Hmm wet screen protector?
You mean apply drop of water on screen protector before ?
wojtas29 said:
Hmm wet screen protector?
You mean apply drop of water on screen protector before ?
Click to expand...
Click to collapse
Yeah the screen protectors that need to be wet or have the screen wet before being applied
They're also easier to apply because you can take them off again and re-apply. The only ones I know of are gadget shieldz or skinomi
Has anyone tried putting on the HTC Double Dip case with a Ghost Armor screen protector?
kist32 said:
colors HTC Double Dip Hard Shell Case
Click to expand...
Click to collapse
YOU HAVE NO IDEA HOW GLAD I AM YOU POSTED THIS LINK. Literally just bought so many.
Sent from my One using Tapatalk 4
bpcivicsi said:
YOU HAVE NO IDEA HOW GLAD I AM YOU POSTED THIS LINK. Literally just bought so many.
Sent from my One using Tapatalk 4
Click to expand...
Click to collapse
I wouldn't trust that much third party DD cases, i mean, even the HTC ones are doing scratches.
Desiredrive said:
I wouldn't trust that much third party DD cases, i mean, even the HTC ones are doing scratches.
Click to expand...
Click to collapse
I have Zagg front and back so no worries :thumbup:
Sent from my One using Tapatalk 4
Ok
I bought protector for wet apply.
Now what i have to do just wear cover stright after protektor applied or
Wait 15 minutes for adhesive drying?
bpcivicsi said:
I have Zagg front and back so no worries :thumbup:
Sent from my One using Tapatalk 4
Click to expand...
Click to collapse
woah that sounds good, i ordered my double dip (dunno if its really genuine since i ordered it from ebay / Honk Kong haha) and i was kind of dissapointed because of reviews and stuff even before it arrives, now i'll try it with those.
Desiredrive said:
woah that sounds good, i ordered my double dip (dunno if its really genuine since i ordered it from ebay / Honk Kong haha) and i was kind of dissapointed because of reviews and stuff even before it arrives, now i'll try it with those.
Click to expand...
Click to collapse
I just received mine that I ordered off ebay /Hong Kong as well. It's pretty nice. I've removed it a couple of times already to see if it scratches and no it hasn't. I just made sure before I first put it on to clean/scrape the inside of any excess plastic.
Sent from my HTC One using xda premium
wojtas29 said:
Ok
I bought protector for wet apply.
Now what i have to do just wear cover stright after protektor applied or
Wait 15 minutes for adhesive drying?
Click to expand...
Click to collapse
I'd wait for about a day for it to settle and everything. Apply the screen protector before you sleep and then put the case on when you wake up.
Are wet application type screen protectors the only ones that are compatible with the Double Dip case?
I would feel more comfortable knowing that the screen is protected but I am not a fan of the grippy texture that Zagg usually has. But if it's the only one that works then beggars can't really be choosers.
Edit: Decided to go with the Zagg Invisible Shield. It actually isn't as bad as it used to be. I'm really satisfied with my purchase.
^_^
Related
Is anyone using a case or screen protector for their phone? I'm thinking of getting one since I'd be really upset if I scratched the nice screen!
Can anyone recommend one to get? And do they affect the sensitivity of the touch screen at all?
I have my SGW from the December. I haven't use any screen protector and the glass is still like new despite the fact that I use my SGW all the time. I am very satisfied with quality of glass.
Ive been using the screen protector from iZound. Easy to apply, good fit, not as expensive as Copter, and no..it doesnt affect the sensitivity at all.
Been using capdase soft jacket and screen protector since i bought mine last December, touch sensitivity is great even with screen protector.
You can easily get from ebay, cheap and good. But will take some time to arrive.
ebay
babribeiro said:
You can easily get from ebay, cheap and good. But will take some time to arrive.
Click to expand...
Click to collapse
i oderd:
www.ebay.com/itm/6-Clear-Screen-Pro...ssories_RL&hash=item3f116d3b16#ht_1511wt_1185
I use these:
http://www.ebay.co.uk/itm/180774276231
http://www.ebay.co.uk/itm/180757493902
No complaints.
ebay
ingar195 said:
i oderd:
ebay.com/itm/6-Clear-Screen-Protector-for-Samsung-Galaxy-W-i8150-/270875310870?pt=UK_Computing_LaptopAccessories_RL&hash=item3f116d3b16#ht_1511wt_1185
Click to expand...
Click to collapse
tok about a week in shipping
It is wise to get a screen protector to protector your screen of cell phone,just buy one in the supper market near you
MIKE PH said:
Been using capdase soft jacket and screen protector since i bought mine last December, touch sensitivity is great even with screen protector.
Click to expand...
Click to collapse
where have you purchased your capdase softjacket and screen protector? coz here in cebu, capdase dont have softjacket and screen protector for my wonder
I have my galaxy wonder from the December 2011, and I use Antiglaire from kaskus.co.id
wonder how the boss
Anyone here from Singapore? Where I can buy a cheap and clear one screen protector?
Sent from my GT-I8150 using xda premium
tievolu said:
I use these:
http://www.ebay.co.uk/itm/180774276231
http://www.ebay.co.uk/itm/180757493902
No complaints.
Click to expand...
Click to collapse
is it rubber case in the back and in the front? (so, no plastic with bubbles in?)
greetz!
antiglare
Monkey_Magic said:
Is anyone using a case or screen protector for their phone? I'm thinking of getting one since I'd be really upset if I scratched the nice screen!
Can anyone recommend one to get? And do they affect the sensitivity of the touch screen at all?
Click to expand...
Click to collapse
i think antiglare will be better
I'm using these made by Kolay.
http://www.ebay.co.uk/itm/GENUINE-K...ting_LaptopAccessories_RL&hash=item2ebd683366
Good quality, supple, screen cleaning cloth with each protector in the pack and easy to apply - can't go wrong really .
:good:
hundred_miles_high said:
I'm using these made by Kolay.
http://www.ebay.co.uk/itm/GENUINE-K...ting_LaptopAccessories_RL&hash=item2ebd683366
Good quality, supple, screen cleaning cloth with each protector in the pack and easy to apply - can't go wrong really .
:good:
Click to expand...
Click to collapse
No airbubbles when placing?
S440 said:
No airbubbles when placing?
Click to expand...
Click to collapse
I have used x3 over the time that I've had my SGW and no air bubbles in any of them when fitted.
Just take your time, clean the screen of your phone thoroughly with the supplied cloths and work in a clean area to avoid any dust getting under (I use the Kitchen worktop after giving it a good wipe down with a damp cloth).
I found them nice to work with, and much, much easier to fit than some of the more expensive ones that I tried when I first got my SGW.
i need an advice too
thanks very much
I bought a ago steinhel flex and I put it on my phone but after only two days one corner has been lifted I don't know what went wrong, I bought it specifically because I read wet protectors don't lift up on the edges :/ . I'm guessing is because I have a Neo hybrid sgp case which has really tight borders.
I just ordered a sgp ultra hybrid which borders fit a little looser on the phone, what do you say should I buy another steinhel flex? Or maybe try the sgp oleophobic which is supposed to be smaller, but it is a dry application which people here are not fans of, maybe try the xo skins case fit?
Sent from my Galaxy Nexus using Tapatalk 2
Tpu cases usually work well. Try diztronics revision 3.
let it be.
the 6 for a dollar ones I get from eBay doesn't interfere with any of my cases. I always suggest those.
mackster248 said:
the 6 for a dollar ones I get from eBay doesn't interfere with any of my cases. I always suggest those.
Click to expand...
Click to collapse
link please
androidtoy09 said:
link please
Click to expand...
Click to collapse
Here you go:
http://www.ebay.com/itm/ws/eBayISAP...0&ssPageName=ADME:L:OC:US:3160#ht_1608wt_1270
It's amazing so far, and it won't scratch. I love em.
Chad_Petree said:
I bought a ago steinhel flex and I put it on my phone but after only two days one corner has been lifted I don't know what went wrong, I bought it specifically because I read wet protectors don't lift up on the edges :/ . I'm guessing is because I have a Neo hybrid sgp case which has really tight borders.
I just ordered a sgp ultra hybrid which borders fit a little looser on the phone, what do you say should I buy another steinhel flex? Or maybe try the sgp oleophobic which is supposed to be smaller, but it is a dry application which people here are not fans of, maybe try the xo skins case fit?
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
it's a common problem for phones whose screens are almost in line with the bezel and if you have a case that covers the bezel. the only solution i saw is to use a smaller protector so the corners of the case would not touch the corners of the protector so it prevents lifting.
thephantom said:
it's a common problem for phones whose screens are almost in line with the bezel and if you have a case that covers the bezel. the only solution i saw is to use a smaller protector so the corners of the case would not touch the corners of the protector so it prevents lifting.
Click to expand...
Click to collapse
Diztronics was offering screen protectors like that but people whined about it and diztronics caved in.
Sent from my GT-P3113 using xda premium
@rbiter said:
Diztronics was offering screen protectors like that but people whined about it and diztronics caved in.
Sent from my GT-P3113 using xda premium
Click to expand...
Click to collapse
the man who's post i will forever keep in my sig. hahaha. good you mentioned that. i didn't actually use my diztronic protector as i have a capdase klia on my gnex. but since it's cut between the size of the actual screen and the one that sgp makes, it seems to not give me any peeling off issues. i guess i'll just keep my free diztronic protector then. hehehe
chances are you have the full screen version if you got the rev3 case. i think the almost to the edge sp's were shipped with earlier versions of the tpu.
i have the full screen xoskins using my diztronic. it doesn't lift the corners or anything!
mackster248 said:
Here you go:
http://www.ebay.com/itm/ws/eBayISAP...0&ssPageName=ADME:L:OC:US:3160#ht_1608wt_1270
It's amazing so far, and it won't scratch. I love em.
Click to expand...
Click to collapse
I agree with you. I used to waste money on "premium" wet and dry screen protectors but I end up going back to cheap plasticy screen protectors lol. They are so easy to apply, no yellow peel, no draggy feeling and I can just replace them any time I want with peace of mind
androidtoy09 said:
I agree with you. I used to waste money on "premium" wet and dry screen protectors but I end up going back to cheap plasticy screen protectors lol. They are so easy to apply, no yellow peel, no draggy feeling and I can just replace them any time I want with peace of mind
Click to expand...
Click to collapse
Haha, yeah exactly! I used to get mad at myself for spending like 14-15 bucks on those wet application types... And only for it to peel off and make the screen look ugly.
I was so mad today. I bought the xo screen protector and had it on for 2 days. I decided to go for a jog and used my arm band case. After the run I tried to remove it from the arm band case, the plastic on the case stuck on the glass of the phone so tight it actually lifted the screen protector while I was trying to remove it so it got ruined. Just a heads up for those getting those "wet application" protectors. Ordered those plasticy clingy ones right after.
Sent from my Galaxy Nexus using XDA
olieebur said:
I was so mad today. I bought the xo screen protector and had it on for 2 days. I decided to go for a jog and used my arm band case. After the run I tried to remove it from the arm band case, the plastic on the case stuck on the glass of the phone so tight it actually lifted the screen protector while I was trying to remove it so it got ruined. Just a heads up for those getting those "wet application" protectors. Ordered those plasticy clingy ones right after.
Sent from my Galaxy Nexus using XDA
Click to expand...
Click to collapse
Damn that's a bummer... My semi-OCD self would be so pissed if that happened to me.
mackster248 said:
Here you go:
http://www.ebay.com/itm/ws/eBayISAP...0&ssPageName=ADME:L:OC:US:3160#ht_1608wt_1270
It's amazing so far, and it won't scratch. I love em.
Click to expand...
Click to collapse
1+ Also, tried most of the wet applied ones and these are a lot nicer, no orange peel to worry about with these.
I have applied the HTC screen protector. It is okay but the capacitive buttons seem to have lost sensitivity. The feeling of the surface is okay but not as good as some matt protectors i have used on other devices. Anyone tried any matt or anti glare protector yet?
jah said:
I have applied the HTC screen protector. It is okay but the capacitive buttons seem to have lost sensitivity. The feeling of the surface is okay but not as good as some matt protectors i have used on other devices. Anyone tried any matt or anti glare protector yet?
Click to expand...
Click to collapse
The HTC screen protector is a complete piece of ****.
It was literally jaw-droppingly bad IMO.
Threw 2 in the bin and got these terrapin ones which are a bit better but still not great. At least they were very cheap
Sent from my HTC One using Tapatalk 2
jah said:
I have applied the HTC screen protector. It is okay but the capacitive buttons seem to have lost sensitivity. The feeling of the surface is okay but not as good as some matt protectors i have used on other devices. Anyone tried any matt or anti glare protector yet?
Click to expand...
Click to collapse
Do the buttons stop working for about 10 seconds with it on? Mine do. However I don't want to take it off and waste it if it's a hardware fault!
Sent from my HTC One using Tapatalk 2
Razwaz said:
Do the buttons stop working for about 10 seconds with it on? Mine do. However I don't want to take it off and waste it if it's a hardware fault!
Sent from my HTC One using Tapatalk 2
Click to expand...
Click to collapse
No what I found is that I need to select the home button a couple of times sometimes before my touch is detected. It is inconsistent though. I have ordered a matt screen protector which should arrive tomorrow so will switch and see if there is a difference.
jah said:
No what I found is that I need to select the home button a couple of times sometimes before my touch is detected. It is inconsistent though. I have ordered a matt screen protector which should arrive tomorrow so will switch and see if there is a difference.
Click to expand...
Click to collapse
Well ive just ordered the glass one from sgp, good idea or not?
Sent from my GT-N7100 using xda premium
I'm finding the same with the HTC protectors. Home and Back often need a couple of prods to register. Also, I dunno if it was slightly too big by a mm or so, but they don't seal down the edges properly and make it look fugly.
I've ordered some other cheap-brand ones to try with instead...
I found the HTC official ones a pile of crap
Both ended up in the bin, wouldnt stick at the edges of the phone and were terrible. Amazon UK now has a few bad reviews for them, when I ordered before the phone arrived there were none. Re ordered some others, they can't be worse than the HTC ones
Anyone have any experience with previous Spigen SGP screen protectors?
Or their glass (GLAS.t) glass screens?
http://www.ebay.co.uk/itm/SPIGEN-SG...ting_LaptopAccessories_RL&hash=item27d1651bf5
Was tempted to buy but I am concerned with the silicon adhesive that it uses to stick itself to the screen. Wondering if it would leave any residue or anything behind if taken off?
Matt
These are good value and work well http://www.ebay.co.uk/itm/321090064869?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
The screen protector is not too matt and as usual assume you'll make a mistake with the first one. The size is very precise and you do need to line-up with the edges carefully to make sure the screen protector is sealed all round. Much better than the HTC ones.
Nokiacrazi said:
Anyone have any experience with previous Spigen SGP screen protectors?
Or their glass (GLAS.t) glass screens?
http://www.ebay.co.uk/itm/SPIGEN-SG...ting_LaptopAccessories_RL&hash=item27d1651bf5
Was tempted to buy but I am concerned with the silicon adhesive that it uses to stick itself to the screen. Wondering if it would leave any residue or anything behind if taken off?
Click to expand...
Click to collapse
Ive got one on the way, first time with a glass ones, sgp are one of the best for screen protectors though.
Sent from my HTC One using xda premium
Ok, Got my Fonem8 ones through from Amazon today. AMAZING! Sorted
marmankites said:
Ok, Got my Fonem8 ones through from Amazon today. AMAZING! Sorted
Click to expand...
Click to collapse
Does this one affect the sensitivity of the capacitive buttons at all?
Those who have installed a screen protector on their phones .
Did you face any issue with capacitive buttons below the screen ?
jah said:
These are good value and work well
The screen protector is not too matt and as usual assume you'll make a mistake with the first one. The size is very precise and you do need to line-up with the edges carefully to make sure the screen protector is sealed all round. Much better than the HTC ones.
Click to expand...
Click to collapse
Just received them today.
hXXps:/ /www dropbox com/s/kr1mbghp64k2mn7/2013-04-05%2016.15.37.jpg
Size wise - perfect width, but too short on length, around 2mm. Pretty matte alright. Looks like nice anti-fingerprint.
Worst part though - it adds something like "RGB grain/noise" to your screen, which is clearly visible especially on white background. Total disaster... And it's visible even from normal viewing distance... I will try to add some photos later.
It's only quick temporary solution for me, before I will get Spigen Ultra Clear.
I previously had HTC oem screen protector on this phone ...poor adhesion and grease magnet. I bought this matte screen protector from imyth at Amazon UK. Good fit, easy application and cheap...only about £2 for a pack of 5. Yes, there is a little brush noise when swiping but I would have that with any matte protector - sgp too. I am happy with it. Good clear image, looks professional and less fuss with fingerprints. Plus it is an eighth of the price of my usual sgp ultra optics.
Here is the imyth seen with and without double dip case (below):
Currently using: BB Z10, HTC ONE and GALAXY NOTE 2
_chief_ said:
Just received them today.
hXXps:/ /www dropbox com/s/kr1mbghp64k2mn7/2013-04-05%2016.15.37.jpg
Size wise - perfect width, but too short on length, around 2mm. Pretty matte alright. Looks like nice anti-fingerprint.
Worst part though - it adds something like "RGB grain/noise" to your screen, which is clearly visible especially on white background. Total disaster... And it's visible even from normal viewing distance... I will try to add some photos later.
It's only quick temporary solution for me, before I will get Spigen Ultra Clear.
Click to expand...
Click to collapse
You're right about the colour change. Didn't mention that as I've had that with matt protection. May try another make, perhaps ultra clear.
Sent from my HTC One using xda premium
3llawi 10 said:
Those who have installed a screen protector on their phones .
Did you face any issue with capacitive buttons below the screen ?
Click to expand...
Click to collapse
I have had intermittent reduced sensitivity issues with and without the screen protector. Plus, I've used two types of screen protector and had same experience. I think it is an issue with the phone. I hope HTC can fix this.
Currently using: BB Z10, HTC ONE and GALAXY NOTE 2
Fosman
For those in the US The Fosmon Crystal Clear Screen Protector Shield for HTC One / HTC M7 - 3 Pack is on sale at Amazon and Newegg for $1.97 with free shipping through SF Planet. I had great luck with all Fosman accessories.
I have used Ghost Armor and it is great. No orange peel effect at all. Crystal clear.
giper54 said:
I have used Ghost Armor and it is great. No orange peel effect at all. Crystal clear.
Click to expand...
Click to collapse
Any links please as I couldn't find it on eBay UK. Thanks
Sent from my HTC One using xda premium
So for the LG g3, is it a good idea to get a screen protector or will it be pretty scratch resistant without one?
Got 2 scratches on mine... Not really sure how it happened.
Sent from my LG-D855 using Tapatalk
kyomagi said:
So for the LG g3, is it a good idea to get a screen protector or will it be pretty scratch resistant without one?
Click to expand...
Click to collapse
I got a tiny scratch that you barley on my G3 and bought a glass screen protector right away, its great, and I don't really notice it, well worth the money,
What people don't understand about gorilla glass is that its still glass no matter how strong it is, all those videos of knives on the screen don't make sense since metal doesn't usually scratch glass anyway, but put some sand near it, even one grain and you got hella scratches, I'd do it, but only the glass screen protector, plastic ones are ugly, leave bubbles and are hard to apply.
Trust me my S5 got scratched within a month all over + my s2 as soon as I took off the protector, Just from keeping it in my pocket
I put one on straight out of the box.
Currently got a plastic one on. No bubbles if you put it on properly.
Probably will get a glass one though when I know the phone has no faults and doesn't need to be sent back.
HTCandroid1 said:
I put one on straight out of the box.
Currently got a plastic one on. No bubbles if you put it on properly.
Probably will get a glass one though when I know the phone has no faults and doesn't need to be sent back.
Click to expand...
Click to collapse
well im going to have BB put a invisashield (SP?) on today. never took the plastic screed protector that came stock off the phone yet. its funky trying to see the screen with all the letters hah
kyomagi said:
well im going to have BB put a invisashield (SP?) on today. never took the plastic screed protector that came stock off the phone yet. its funky trying to see the screen with all the letters hah
Click to expand...
Click to collapse
Haha that's dedication using the phone with the original screen cover on!
I took the original cover off and put a Spigen protector straight on. Didn't even have to wipe smudges or dust off, a lot easier like that [emoji3]
I've been using the stock protector from Verizon-- never pulled it off, it only blocks a little bit of the bottom buttons, and while it's a bit of a fingerprint magnet I figure it's perfectly applied/aligned (no dust specks or bubbles), etc. That said I don't expect it to look pristine for too much longer.
I ordered some of the Illumishield protectors from Amazon, I know someone who's used them and it looks nice. If the Verizon one's fingerprints start getting to me (or the "Audio Jack" and "Charging port" writing gets too obnoxious) I'll try one. Not sure I am ready to make the jump to tempered glass yet...
I've been using skinomi on all my phone's. Nice screen protector.
I put one on my device the second I got it, but I noticed a scratch on my screen when switching screen protectors, so I just run 100% naked now.
jasvncnt1 said:
I've been using skinomi on all my phone's. Nice screen protector.
Click to expand...
Click to collapse
Get tempered glass if you can! Totally worth it!
I put a Zagg glass on the day I got the phone...best screen protector I have ever used!!
It's better to have a screen protector. Unfortunately it doesn't have the gorilla glass. I just bought the ZAGG glass invisible shield. It's wonderful. It feels more like the phone screen than plastic
BioAndriod said:
It's better to have a screen protector. Unfortunately it doesn't have the gorilla glass. I just bought the ZAGG glass invisible shield. It's wonderful. It feels more like the phone screen than plastic
Click to expand...
Click to collapse
So it's available for our phones now? I looked on their website yesterday and it said not yet available. I guess I'll have to look again.
Sent from my LG-D850 using XDA Free mobile app
I got mine in Best Buy. They're pricey $39, but I think it's worth it.
BioAndriod said:
I got mine in Best Buy. They're pricey $39, but I think it's worth it.
Click to expand...
Click to collapse
Best buy price matches Amazon and several other online retailers. I wonder if they would price match the official ZAGG price on their website.
Sent from my LG-D850 using XDA Free mobile app
they might, or they might have it cheaper than Best Buy
I've tried 6 screen protectors and finally found one without any issues. #5 was a zizo and it fit but had a stupid rainbow and the top corner randomly broke in my pocket after a month.
I bought this one on ebay. It covers the whole screen, fits perfectly, has a curved screen, no rainbow, air bubbles, and doesn't lift up at the ends. I'm finally happy with my screen protector
http://www.ebay.com/itm/252678476834
Do you use a case with the phone?
I thought someone tried this on the main thread for screen protectors and said it was just another Zizo. I really don't care about the rainbow. I just hate the smudges
Sent from my Pixel C using Tapatalk
eRRoRist said:
Do you use a case with the phone?
Click to expand...
Click to collapse
Yes this one
https://www.amazon.com/dp/B01LYC88EN
Joediver53 said:
I thought someone tried this on the main thread for screen protectors and said it was just another Zizo. I really don't care about the rainbow. I just hate the smudges
Click to expand...
Click to collapse
It looks similar to zizo but it isn't (I've bought both).
UPSGuy said:
I've tried 6 screen protectors and finally found one without any issues. #5 was a zizo and it fit but had a stupid rainbow and the top corner randomly broke in my pocket after a month.
I bought this one on ebay. It covers the whole screen, fits perfectly, has a curved screen, no rainbow, air bubbles, and doesn't lift up at the ends. I'm finally happy with my screen protector
http://www.ebay.com/itm/252678476834
Click to expand...
Click to collapse
Would you be so kind post few picture how it looks like please.
I am joining netgar with the request of pictures.
If you can please show how it looks with and without the case.
Thanks!
UPSGuy said:
I've tried 6 screen protectors and finally found one without any issues. #5 was a zizo and it fit but had a stupid rainbow and the top corner randomly broke in my pocket after a month.
I bought this one on ebay. It covers the whole screen, fits perfectly, has a curved screen, no rainbow, air bubbles, and doesn't lift up at the ends. I'm finally happy with my screen protector
http://www.ebay.com/itm/252678476834
Click to expand...
Click to collapse
So, this is interesting, I bought the zizo combination case and glass screen protector combo amd it looks EXACTLY like the one you're mentioning here. It's actually really great. No rainbow or bubbling and full-screen exactly like this one.
TheBigL said:
I am joining netgar with the request of pictures.
If you can please show how it looks with and without the case.
Thanks!
Click to expand...
Click to collapse
Sorry, the only way I have to take pictures is with the phone itself in a mirror (not terribly useful) or with the web cam on my new laptop which of course is of an awful quality. Here is the best I could get...
Would be nice if you use a friend's phone and take some pictures of the screen protector installed. I'm not being rude and appreciate your attempts at photographing it, but honestly they're pointless as they show us nothing
Sent from my LG V20 using XDA Labs
For $7 I'm going to give it a shot. Same price on Amazon for Supershieldz and 2 day delivery. Will update when installed
UPDATE: My Supershieldz TGP arrived and before heading out of town on business I installed and can confirm NO HALO. This is not just a Zizo close. Been using it for a couple of days now and while there is still smudging it's not as bad as the Zizo. I'll try to post some photos using my 6p when I get home
stanglifemike said:
Would be nice if you use a friend's phone and take some pictures of the screen protector installed. I'm not being rude and appreciate your attempts at photographing it, but honestly they're pointless as they show us nothing
Sent from my LG V20 using XDA Labs
Click to expand...
Click to collapse
I'm with stanglifemike...
U can't see anything in those pictures.
I've ordered a zizo and a couple of the others that look the same and I'm done. All the ones I get smudge like crazy and have the rainbow effect.
I'm just gonna wait until there's a definite consensus on one that doesn't have those issues.
I'm currently using an Armor shield wet protector and it's pretty good for plastic. Better than the glass protectors as far clarity/smudge resistance but the glass is obviously better as far as feel goes.
Anybody knows a good matte/Anti-Glare screen protecror that covers the whole screen?
I pried my wife's iphone 7 plus out of her hands long enough to take these.
Is there adhesive on the clear part of the glass? Not just on the black trim. That's the cause of the oil spill under the screen. No adhesive to hold it tight to the phone like the clear tempered shields.
Sent from my VS995 using XDA-Developers Legacy app
666syco said:
Is there adhesive on the clear part of the glass? Not just on the black trim. That's the cause of the oil spill under the screen. No adhesive to hold it tight to the phone like the clear tempered shields.
Click to expand...
Click to collapse
Not a clue, but whatever is holding it on is clear with no bubbles, bumps or rainbow oil slicks.
UPSGuy said:
Not a clue, but whatever is holding it on is clear with no bubbles, bumps or rainbow oil slicks.
Click to expand...
Click to collapse
And smudges?
Sent from my Pixel C using Tapatalk
Joediver53 said:
And smudges?
Click to expand...
Click to collapse
I've never had a problem with that on any of the 6 I've tried so can't say. No issues here for me.
Joediver53 said:
For $7 I'm going to give it a shot. Same price on Amazon for Supershieldz and 2 day delivery. Will update when installed
UPDATE: My Supershieldz TGP arrived and before heading out of town on business I installed and can confirm NO HALO. This is not just a Zizo close. Been using it for a couple of days now and while there is still smudging it's not as bad as the Zizo. I'll try to post some photos using my 6p when I get home
Click to expand...
Click to collapse
I was not about to stick my finger on the adhesive side to check if the center has adhesive but with no halos can't think of another explanation