So I bought a redmi note 5a(prime) from a local retailer nearby. I was careless and didnt check the phone.After opening the phone at my home , its not booting up at all and retailer says you bricked the mobile and its against warranty.I didnt even use it once.Please help if anything can be done. No repair shop has been able to fix the problem.Any help or information will be highly appreciated.
Shaurya9008 said:
So I bought a redmi note 5a(prime) from a local retailer nearby. I was careless and didnt check the phone.After opening the phone at my home , its not booting up at all and retailer says you bricked the mobile and its against warranty.I didnt even use it once.Please help if anything can be done. No repair shop has been able to fix the problem.Any help or information will be highly appreciated.
Click to expand...
Click to collapse
Have you try using edl method?
But at least can you access fastboot first, using power off + volume down
If you could, then it can boot into edl mode using tools provided from the internet, there are many of them
And flash fastboot firmware using MI flash or Qualcomm Flash Image Loader (QFIL)
voidGlyph said:
Have you try using edl method?
But at least can you access fastboot first, using power off + volume down
If you could, then it can boot into edl mode using tools provided from the internet, there are many of them
And flash fastboot firmware using MI flash or Qualcomm Flash Image Loader (QFIL)
Click to expand...
Click to collapse
No, I tried but nothing happens.I can't enter fastboot and nothing appears other than that logo. I think the device is completely bricked and I don't think I can fix this.Thanks for your time.
Shaurya9008 said:
No, I tried but nothing happens.I can't enter fastboot and nothing appears other than that logo. I think the device is completely bricked and I don't think I can fix this.Thanks for your time.
Click to expand...
Click to collapse
Because I have another xiaomi device before, and it also get into penguin logo, and I can assure that my device has no installed os too
But because most of xiaomi phone chipset is Qualcomm, and Qualcomm device has edl mode, to flash image
And sure with my bricked device (stuck in penguin logo), I still able to access edl mode
But it was my old phone, not Redmi Note 5A, and I'm searching for how to enter edl mode on Note 5A, the process is you must use test point inside the device
Other than that, I don't know though
But if for my old phone (Redmi 2 Prime) the procedure is press volume down, then insert USB cable that connected to pc, then I can start to flash using QFIL
voidGlyph said:
Have you try using edl method?
But at least can you access fastboot first, using power off + volume down
If you could, then it can boot into edl mode using tools provided from the internet, there are many of them
And flash fastboot firmware using MI flash or Qualcomm Flash Image Loader (QFIL)
Click to expand...
Click to collapse
you can reflash ROM by using EDL method which you have to shortcircuit some pins to enter EDL, it is pretty easy if you have the tools. After reflashing it, reboot and it should be okay.
nayefhaidir said:
you can reflash ROM by using EDL method which you have to shortcircuit some pins to enter EDL, it is pretty easy if you have the tools. After reflashing it, reboot and it should be okay.
Click to expand...
Click to collapse
Oh yeah I forgot about this too, this is the most useful one
I also saw some people do with test point
Because I don't have any experience to do that, so I didn't do, as it needs to crack open the phone
Related
Hi,
My phone got a message about a virus which I assumed was a devious add, it wouldn't go away so I rebooted. It has gone into Mi-Recovery 3.0 and I cant get out. I've tried to connect to PC suite but it won't connect to my laptop
without debugging, which I can't do. I've wiped data but no good. Any ideas?
Flash full rom img via EDL mode and MiFlash software. Check out the official forums how to do it all.
For me the command fastboot oem edl works to get into edl mode.
pr0x2 said:
Flash full rom img via EDL mode and MiFlash software. Check out the official forums how to do it all.
For me the command fastboot oem edl works to get into edl mode.
Click to expand...
Click to collapse
Thank you for answering. I have downloaded a full rom and the MiFlash software. I have made an EDL cable but nothing happens. From what I read it says turn the phone off and connect the modified cable and it will enter EDL mode however it just stays on the Mi-Recovery 3.0 page. I've tried the command line you suggest but that can't find the phone. I've also tried the test point method and still can't get into edl mode. What am I doing wrong?
Sorry, I'm new to this so don't really know what I'm doing. Would you be able to give me some easy to follow advise or some links please.
Multi57 said:
Thank you for answering. I have downloaded a full rom and the MiFlash software. I have made an EDL cable but nothing happens. From what I read it says turn the phone off and connect the modified cable and it will enter EDL mode however it just stays on the Mi-Recovery 3.0 page. I've tried the command line you suggest but that can't find the phone. I've also tried the test point method and still can't get into edl mode. What am I doing wrong?
Sorry, I'm new to this so don't really know what I'm doing. Would you be able to give me some easy to follow advise or some links please.
Click to expand...
Click to collapse
You need your normal USB C cable. When you are in fastboot you need to type "fastboot oem edl" your screen will go to black and you are now in EDL mode. Now flash full img via miflash software.
pr0x2 said:
You need your normal USB C cable. When you are in fastboot you need to type "fastboot oem edl" your screen will go to black and you are now in EDL mode. Now flash full img via miflash software.
Click to expand...
Click to collapse
I cant get to fastboot as I'm stuck in Recovery. My only choices are Reboot to System and Back to Main Menu. When I'm in Main Menu my choices are Reboot, Wipe Data or Connect with MIAssistant.
Multi57 said:
I cant get to fastboot as I'm stuck in Recovery. My only choices are Reboot to System and Back to Main Menu. When I'm in Main Menu my choices are Reboot, Wipe Data or Connect with MIAssistant.
Click to expand...
Click to collapse
When you turn off the phone and press vol down + power what does that do?
It shows the Mi start screen then boots strait into recovery Main Menu. I can't turn the phone off without it rebooting.
Does anyone know how I can get around this? I've run out of things to try.
Did you try reflashing the recovery maybe that fixes it?
Sent from my MI 5s using Tapatalk
Can you explain how I do that? I can't connect to my computer so not sure what you mean. I'm new at this so unsure of the options.
Multi57 said:
Can you explain how I do that? I can't connect to my computer so not sure what you mean. I'm new at this so unsure of the options.
Click to expand...
Click to collapse
Oh hmm never mind. Ignore what I said above. I thought you had TWRP recovery but you've got the stock one.
Sent from my MI 5s using Tapatalk
templeka said:
Oh hmm never mind. Ignore what I said above. I thought you had TWRP recovery but you've got the stock one.
Sent from my MI 5s using Tapatalk
Click to expand...
Click to collapse
Is there no way of getting out of stock recovery?
Maybe your volume rocker buttons are faulty .
Happened with one of my friend his device was only booting into recovery mode on reboot because vol+ button was permanently stuck ?
Try to lift up the button if it is stuck or
press button repeatedly for sometime .
Ashish 289, you are right, it was a faulty volume rocker. Once disconnected it booted. Thanks.
Multi57 said:
Hi,
My phone got a message about a virus which I assumed was a devious add, it wouldn't go away so I rebooted. It has gone into Mi-Recovery 3.0 and I cant get out. I've tried to connect to PC suite but it won't connect to my laptop
without debugging, which I can't do. I've wiped data but no good. Any ideas?
Click to expand...
Click to collapse
now its my turn brother got my mi5 bricked in the same way .
it stays in mi recovery 3.0 always . if you tell me what you did after these steps not working ? could you do anything ?
need a solution man, please help .
thanks in advance.
Hey thank you for reading this my mi note 8 is hardbricked are there any ways to fix it
i tryed to install a stable rom with twrp i cant go to fastboot and recovery mode
Please help me
If you can help me with fixing this i could pay if you want
Greetings Jerano
Jerano said:
Hey thank you for reading this my mi note 8 is hardbricked are there any ways to fix it
i tryed to install a stable rom with twrp i cant go to fastboot and recovery mode
Please help me
If you can help me with fixing this i could pay if you want
Greetings Jerano
Click to expand...
Click to collapse
Did you try to use MiFlash tool? If you don´t want to use test point then probably you could enter to EDL using hardware buttons, in other Xiaomi devices that I owned the combination key was keeping pressed both volume buttons at same time (it´s an accuracy timing move) that you connect with PC, open device manager in windows and see if device is detected under Qualcomm HS-USB QDLoader 9008, install first the proper drivers https://www.themefoxx.com/2018/07/qualcomm-hs-usb-qdloader-9008-driver.html
SubwayChamp said:
Did you try to use MiFlash tool? If you don´t want to use test point then probably you could enter to EDL using hardware buttons, in other Xiaomi devices that I owned the combination key was keeping pressed both volume buttons at same time (it´s an accuracy timing move) that you connect with PC, open device manager in windows and see if device is detected under Qualcomm HS-USB QDLoader 9008, install first the proper drivers https://www.themefoxx.com/2018/07/qualcomm-hs-usb-qdloader-9008-driver.html
Click to expand...
Click to collapse
Now this method won't work as flashing in EDL mode requires you to have an authorized account which xiaomi provides only to the service centers.
the_weird_aquarian said:
Now this method won't work as flashing in EDL mode requires you to have an authorized account which xiaomi provides only to the service centers.
Click to expand...
Click to collapse
Have the same problem with the account.
Will there be any way to install without the account?
Demon6672 said:
Have the same problem with the account.
Will there be any way to install without the account?
Click to expand...
Click to collapse
nah man, only way is to visit service center if you're stuck on EDL mode without recovery or fastboot.
the_weird_aquarian said:
Now this method won't work as flashing in EDL mode requires you to have an authorized account which xiaomi provides only to the service centers.
Click to expand...
Click to collapse
Oops, I completely forgot this, all my previous devices didn´t need it (Mi Max, R5+, Mi8L, MiA2L). Anyway double check before to try something weird with this device, in many countries (including mine) no service center available for. Thx for the info.
@Jerano : I don't know the status of your phone, but take a look here : http://4pda.ru/forum/index.php?showtopic=973206&st=420#entry91980022
(use online translators)
SubwayChamp said:
Oops, I completely forgot this, all my previous devices didn´t need it (Mi Max, R5+, Mi8L, MiA2L). Anyway double check before to try something weird with this device, in many countries (including mine) no service center available for. Thx for the info.
Click to expand...
Click to collapse
Yes I know...it worked on previous phones...but now xiaomi has started this new thing to give authorized accounts only to service center...
fratellos said:
@Jerano : I don't know the status of your phone, but take a look here : http://4pda.ru/forum/index.php?showtopic=973206&st=420#entry91980022
(use online translators)
Click to expand...
Click to collapse
That won't work either... it's a different thing..if your system is destroyed you'll get an error and your phone will still be able to boot to fastboot....if your phone doesn't boot to fastboot then you can't flash vbmeta.img
the system has been destroyed? on your screen?
Lanzer0 said:
the system has been destroyed? on your screen?
Click to expand...
Click to collapse
flash fastboot rom with miflash tools.
raptorddd said:
flash fastboot rom with miflash tools.
Click to expand...
Click to collapse
[ERROR] missing files script?sorry my English
Lanzer0 said:
[ERROR] missing files script?sorry my English
Click to expand...
Click to collapse
extracted the fastboot file twice?? also check if fastboot file path has no spaces in patch name.. but for system destroyed you can just flash vbmeta and recovery no need to flash full fastboot rom
Jerano said:
Hey thank you for reading this my mi note 8 is hardbricked are there any ways to fix it
i tryed to install a stable rom with twrp i cant go to fastboot and recovery mode
Please help me
If you can help me with fixing this i could pay if you want
Greetings Jerano
Click to expand...
Click to collapse
Any errors on screen or something?..or just black screen nothing else?
I cannot enter fastboot or recovery mode and the only way is EDL, but when installing ask for the authorized account, my question is if it can be installed by EDL without an account
Demon6672 said:
I cannot enter fastboot or recovery mode and the only way is EDL, but when installing ask for the authorized account, my question is if it can be installed by EDL without an account
Click to expand...
Click to collapse
Unfortunately..the answer is no... previously it was possible..but now xiaomi has changed it...it requires authorized account for edl flashing which xiaomi provides only to service centers
Hello, i tried helping my grandmother by installing the global rom on her Xiaomi Mi Pad 5 Pro WIFI, however as it didn't work i tried forcing the rom onto it by flashing it manually using fastboot, after this i am not able to power it on, or reach fastboot. It's just a black screen it doesn't matter how long you hold the power key it's just completely black.. Is there something i can do???? Or is it completely destroyed?
Global ROM is not available for PRO version. Probably you flashed a wrong one. Try flashing back the CN one matches your model.
mkcs said:
Global ROM is not available for PRO version. Probably you flashed a wrong one. Try flashing back the CN one matches your model.
Click to expand...
Click to collapse
Ahh thats the thing, it won't even power on now, i cannot even access fastboot
desyncccccccc said:
Ahh thats the thing, it won't even power on now, i cannot even access fastboot
Click to expand...
Click to collapse
long press "Volume Down" + "Power" for a few seconds at the same time and then release only"Power" once the fastboot logo appears, finally release "Volume Down" to enter the fastboot mode
Its for xiaomi mi5
Maybe helps
Is there anything I can do? Brick help
My Xiaomi mi5 does not turn on. No lights, fastboot is not accessible, resetting it does not do anything. Basically for any combination of buttons that I press, nothing happens and the screen stays black - it is completely dead. However, when I...
forum.xda-developers.com
Keyvannn said:
Its for xiaomi mi5
Maybe helps
Is there anything I can do? Brick help
My Xiaomi mi5 does not turn on. No lights, fastboot is not accessible, resetting it does not do anything. Basically for any combination of buttons that I press, nothing happens and the screen stays black - it is completely dead. However, when I...
forum.xda-developers.com
Click to expand...
Click to collapse
Yeah so the only problem with this is that mine won't even show up even though i have said drivers installed.. I'm starting to think it's hard bricked
Hello, yes same as me. The tablet are in the 9008 edl state when you put it on your computer. there are many flashing tools out there, the problem are the flash authentification from xiaomis side. i prepared a empty pc with windows 10 and loaded the last fastboot image. then i got a telegram contact from a russian guy who was able to use the xiaomi auth procedure, cost me 30 dollar and 3 days to find out this crap
Xiaomi needs a better way to unbrick its devices instead of Authorized Mi Accounts
Xiaomi has locked down the EDL mode on all of its devices, making it nigh impossible to unbrick a device without an Authorized Mi Account. Read on for more!
www.xda-developers.com
desyncccccccc said:
Hello, i tried helping my grandmother by installing the global rom on her Xiaomi Mi Pad 5 Pro WIFI, however as it didn't work i tried forcing the rom onto it by flashing it manually using fastboot, after this i am not able to power it on, or reach fastboot. It's just a black screen it doesn't matter how long you hold the power key it's just completely black.. Is there something i can do???? Or is it completely destroyed?
Click to expand...
Click to collapse
When it's plugged into the PC, is it recognised with "fastboot devices" or "adb devices"?
If it is you should be able to wipe with "fastboot -w" and start again.
Google detailed instructions.
mikefnz said:
When it's plugged into the PC, is it recognised with "fastboot devices" or "adb devices"?
If it is you should be able to wipe with "fastboot -w" and start again.
Google detailed instructions.
Click to expand...
Click to collapse
Unfortunately no, i do not get any response from fastboot whatsoever, there's no device detection in either fastboot or device manager. I even tried on my laptop which is brand new still no sign of life
fritzeman said:
Hello, yes same as me. The tablet are in the 9008 edl state when you put it on your computer. there are many flashing tools out there, the problem are the flash authentification from xiaomis side. i prepared a empty pc with windows 10 and loaded the last fastboot image. then i got a telegram contact from a russian guy who was able to use the xiaomi auth procedure, cost me 30 dollar and 3 days to find out this crap
Click to expand...
Click to collapse
Where would i be able to get in contact with someone like that??
desyncccccccc said:
Unfortunately no, i do not get any response from fastboot whatsoever, there's no device detection in either fastboot or device manager. I even tried on my laptop which is brand new still no sign of life
Click to expand...
Click to collapse
Try different cable & different pc usb slot?
Try flashing using * Xiaomi professional pro tools . Buy credit and all done,
mikefnz said:
Try different cable & different pc usb slot?
Click to expand...
Click to collapse
Unfortunately any cable/pc i try i get the same result, i'm debating wether i should just get a new one for her with global rom instead
desyncccccccc said:
Unfortunately any cable/pc i try i get the same result, i'm debating wether i should just get a new one for her with global rom instead
Click to expand...
Click to collapse
Don't give up yet!
Charge the tablet with another cable that you know works.
Make sure that you have the most up to date version of Platform Tools.
Make sure that when you're in the Command Prompt that you are in the Platform Tools folder.
Check connections with another device....
mikefnz said:
Don't give up yet!
Charge the tablet with another cable that you know works.
Make sure that you have the most up to date version of Platform Tools.
Make sure that when you're in the Command Prompt that you are in the Platform Tools folder.
Check connections with another device....
Click to expand...
Click to collapse
Hello again, i tried with all possible cables and or devices, somehow it still does not show up, i am rather confused and thinking that i might've broke it fully
desyncccccccc said:
Hello again, i tried with all possible cables and or devices, somehow it still does not show up, i am rather confused and thinking that i might've broke it fully
Click to expand...
Click to collapse
Buy an EDL Cable For Qualcomm 9008 Mode for deep flashing
desyncccccccc said:
Hello again, i tried with all possible cables and or devices, somehow it still does not show up, i am rather confused and thinking that i might've broke it fully
Click to expand...
Click to collapse
Have you got the most up to date version of Platform-tools installed and are you checking the connection from a CMD prompt in that Platform-tools folder?
mkcs said:
Buy an EDL Cable For Qualcomm 9008 Mode for deep flashing
Click to expand...
Click to collapse
Could you please link me one of those? I'm over in the EU so maybe they'll be fairly easy to find?
mikefnz said:
Have you got the most up to date version of Platform-tools installed and are you checking the connection from a CMD prompt in that Platform-tools folder?
Click to expand...
Click to collapse
Yeah, i've been doing all of that. I just now found out that there's an EDL cable specifically made for flashing in that mode
So I downloaded pixelos and wished to revert to stock miui, i was using the miflash tool and in the first few seconds my usb disconnected. Then i could not exit fastboot no matter what I pressed. I've tried to flash miui again but am getting the error "data transfer error" and "data transfer time unknown". I could really use the help. Thank you
This kind of crap happened to my Redmi K30 Pro as well. The only difference is that mine did not turn on anymore after I tried to restart it. Both Recovery Mode and Fastboot are unaccessible.
I think there's always a risk going from a custom rom back to miui, specially so when using fastboot.
If u can access EDL mode either via touch point or EDL Usb cable, do that and try flashing the MIUI again through Mi-Flash. Make sure you're using the same MiAccount and hope they will flag it as authorized, otherwise you'll be forced to take it to a service center and have the whole motherboard replaced.
You can also use QFIL but that's a unreliable tool and it always spouts out Sahara error messages.
iceman0826 said:
This kind of crap happened to my Redmi K30 Pro as well. The only difference is that mine did not turn on anymore after I tried to restart it. Both Recovery Mode and Fastboot are unaccessible.
I think there's always a risk going from a custom rom back to miui, specially so when using fastboot.
If u can access EDL mode either via touch point or EDL Usb cable, do that and try flashing the MIUI again through Mi-Flash. Make sure you're using the same MiAccount and hope they will flag it as authorized, otherwise you'll be forced to take it to a service center and have the whole motherboard replaced.
You can also use QFIL but that's a unreliable tool and it always spouts out Sahara error messages.
Click to expand...
Click to collapse
I am not familliar with EDL mode, any tutorials you know to get into that? I really appreciate it.
Google is your bestfriend. If ur going with touch point method, know that it will void the warranty as you'll have to open it and short the pins, to invoke EDL mode.
EDL cable is advisable so try that first and follow the instructions that came with the package. It's a cable with a button.
iceman0826 said:
Google is your bestfriend. If ur going with touch point method, know that it will void the warranty as you'll have to open it and short the pins, to invoke EDL mode.
EDL cable is advisable so try that first and follow the instructions that came with the package. It's a cable with a button.
Click to expand...
Click to collapse
And once im in EDL mode, do i just have to try the miflash tool again?
Also can i try get TWRP again and try boot a rom from there, could that be possible?
If u can access the recovery mode then try that first.
For EDL mode, yes you have to use MiFlash for this. Make sure you're using the same Mi Account that you've used when you unlocked the bootloader and do not remove the device from the Mi Account. This way, it will recognized it as authorized and it will flash successfully.
iceman0826 said:
If u can access the recovery mode then try that first.
For EDL mode, yes you have to use MiFlash for this. Make sure you're using the same Mi Account that you've used when you unlocked the bootloader and do not remove the device from the Mi Account. This way, it will recognized it as authorized and it will flash successfully.
Click to expand...
Click to collapse
Okay I've managed to get TWRP installed, any idea what to do from here?
I'm sure you're knowledgeable in flashing, and knows how to use google. I'm sure u also know that accessing TWRP is a good sign and u can now access fastboot or EDL via adb from there.
iceman0826 said:
I'm sure you're knowledgeable in flashing, and knows how to use google. I'm sure u also know that accessing TWRP is a good sign and u can now access fastboot or EDL via adb from there.
Click to expand...
Click to collapse
I've only flashed one custom rom so not too knowledgable, I would probably try to get a miui recovery file and transfer it to my phone and then install from twrp. I think that would work
Also i cant decrypt my data despite entering the only pin I have ever used
Hey guys,
I wanted to try out a custom rom, so I unlocked the bootloader of my phone and installed orange fox recovery successfully. Since I somehow uninstalled MIUI in the process of installing orange fox, I downloaded a .zip file containing a custom rom for my device (its called Cherish OS, but that shouldn't be the problem here). Since I wiped the whole internal storage of my phone, I used the "adb push" command to get the according file onto my Xiaomi Mi 11 Lite 5G NE. After installing the .zip file using orange fox, I pressed "reboot". However, my phone just shut down and did not reboot as it was supposed to do. I tried holding down the power button for at least 10 seconds to get it to boot, however the screen remained completely black. Even pressing volume down and power button did not help, the same with power up and power button. Whatever I tried, the screen remained black (no bootlogo etc).
I then charged up my phone, but that did not solve the issue either (before installation it had 47%, so I doubt that the battery died during installation as its a brand new phone).
One thing to notice is that my Windows PC makes a sound when I plug my phone into my Computer, as if I has plugged in a harddrive or something. But I can't get it to show up in the file explorer or with "fastboot devices". So clearly something happens when I turn on my phone, but the screen remains off.
I really hope you can help me to bring my (brandnew) phone back to life!
Thanks in advance.
P.S.: I used an ampmeter to check the charging current, its only around 60mA even though I used the official 33W charging brick.
another hard brick... you should have followed official instructions on how to flash the ROM...
PaperKing13 said:
another hard brick... you should have followed official instructions on how to flash the ROM...
Click to expand...
Click to collapse
So there is absolutely no way of getting it back to life? Can't I flash new firmware of something?
Edit: Okay, so I guess its in EDL mode now, any tips/tutorials on how to flash new firmware?
Lupus3141 said:
So there is absolutely no way of getting it back to life? Can't I flash new firmware of something?
Edit: Okay, so I guess its in EDL mode now, any tips/tutorials on how to flash new firmware?
Click to expand...
Click to collapse
Enter "Fastboot" mode and flash original Firmware from here https://xiaomifirmwareupdater.com/firmware/agate/ ! You can also use Miflash
4rch0 said:
Enter "Fastboot" mode and flash original Firmware from here https://xiaomifirmwareupdater.com/firmware/agate/ ! You can also use Miflash
Click to expand...
Click to collapse
Thank you for your reply, but unfortunately my phone is completely fried. I can't access fastboot mode. Any ideas how to fix this? As I have already mentioned, I guess its in EDL mode and to my knowledge only certified repair shops (or scammy internet advertisments) can resolve this issue.
Thanks in advance!
Lupus3141 said:
Thank you for your reply, but unfortunately my phone is completely fried. I can't access fastboot mode. Any ideas how to fix this? As I have already mentioned, I guess its in EDL mode and to my knowledge only certified repair shops (or scammy internet advertisments) can resolve this issue.
Thanks in advance!
Click to expand...
Click to collapse
How to Exit EDL Mode [Emergency Download Mode] in Android
In this comprehensive tutorial, we will show you the detailed steps to exit the EDL Mode (Emergency Download Mode) in Android
www.droidwin.com
4rch0 said:
How to Exit EDL Mode [Emergency Download Mode] in Android
In this comprehensive tutorial, we will show you the detailed steps to exit the EDL Mode (Emergency Download Mode) in Android
www.droidwin.com
Click to expand...
Click to collapse
[GUIDE] How to bypass authentication and flash in EDL with NO auth for FREE
Thanks to: chaosmaster / k4y0z: GitHub / XDA xyzz / xyz`: GitHub / XDA Dinolek: GitHub / XDA How to install: 1. Download the attached file: VD171_MTK-bypass.zip. 2. Extract the file and open the folder. 3. Run and install python...
forum.xda-developers.com
The tutorial seems to just work with Mediatek processors, however my phone uses Qualcom. Any other links?
Lupus3141 said:
So there is absolutely no way of getting it back to life? Can't I flash new firmware of something?
Edit: Okay, so I guess its in EDL mode now, any tips/tutorials on how to flash new firmware?
Click to expand...
Click to collapse
There's no tutorial unfortunately... You'll have to go to an Authorized Xiaomi Service Center.