Hello I would like to know if someone could guide me on how to solve a problem I had with all the roms I have tried and after the boot to boot the rom works fine but when I lock my smartphone after a while I want to unlock it, the black screen and reboots alone, and I have done the installation process as indicated in the post but still with the same error and only with the roms standing, if someone could help me I would appreciate it very much....:crying::good::fingers-crossed:
Related
Hey iam new to this upgrading,CID unlocking etc.
I just bought my Cingular 8125 three weeks before.
I tried upgrading to WM 6.0 The update process completed successfully but after the reboot my mobile was back to factory default with wm 5.0.
without tring the lokiwiz to unlock, i used shelltools to flash the wm6.0.
it was successful, it asked me to do a hard reset.
Since then i am stuck up with the boot screen.
I can't get my Mobile back working.
i tried flashing with the Offical rom but of no use.
i have tried button rom, love rom. nothing works out.
without much knowledge i upgrade my spl & IPL to 3.08
now i am not able to downgrade that too.
tried flashing different roms but of no use, still it stucks up in the boot screen.
the only hope iam having is i am able to get into the boot loader.
I am not sure, where to post this thread, my appologize if i have posted in the wrong page.
below is the information i have on the screen
IPL 2.26
SPL 3.08
GSM 01.12.10
OS 1.5.4.2
Some one please help me out. i am very much worried, any help is very much appreciated.Thanks a bunch in advance !
dosai.
Have you tried flashing from the bootloader to an official rom?
thanks for reverting, i have tried that too, but of no use.
Sounds to me like you didn't run the Cert_SPCS and EnableRapi cab files before flashing with ShellTool. Being stuck at the splash screen is a dead giveaway.
I never did understand why someone would attempt to flash a ROM without doing ALL the steps. . .
i did ran Cert_SPCS and EnableRapi cab before running the shelltool. shell tool took around 10 mins to complete the update.after restart, my phone stucked up in the boot screen!. (i remember not unlocking the cid before proceeding with the shelltool) .
is there any way to get the mobile working i am too worried.
Solution
Hi, press and hold the CamShot Button and press the Power button, when you see a multi-color screen you can make a update again.
Hello all Im new here and have the same problem. I followed all the steps and followed all the instructions to fix this problem but nothing. I am stuck on the multi-color screen and i can't do nothing! HELPPPPPPPPPPPP!
Hi,
I'm new to Android devices. Yesterday I tried to flash Cynogenmod, downloaded from Official site and followed the procedure as mentioned. But after completing all steps and flashing ROM it stuck on loading "CYNOGENMOD" logo and not loading into OS. I removed the battery and tried to restart the device but same problem again. Can someone please tell me what is the reason and how can I solve it. Thank You.
if anyone can help it woul be greatly appreciated my hox had a random reboot today and now is is stuck on a bootloop in the htc quietly brilliant screen when i try to enter the hboot section it just reboots again im at a loss any help would be appreciated thank you
Are you running stock or custom rom? Try factory reset..
Assuming you haven't done something in regards to custom ROMs, etc, have you gotten the phone wet at all recently? If not and you have modded the phone somehow it's probably a software issue which can be resolved by flashing a recovery or RUU.
thaks for your help guys i am rooted with custom recovery and rom but i have managed to fix it now if any body els faces this problem it seems that my battery was just too low to boot anything
Good to all, I have a problem with my Huawei Rio L-03 everything worked great had the Aosp ROM extended but I decided to return to the stock B340 . I did it by the method of the 3 buttons and the process went normal.Al beginning touch without touch the buttons do not react only to make a capture of the screen and turn off the sound only observes 3/4 of the screen but that part of The screen works In twrp I said something of the ROM affection to the system (I supposed) so I try to install the firmware by Fastboot thing that ends in the same results. I was reading the forum and I found a solution to load it all night and morning Next I was going to start the initial configuration and when that happens loading a rom but it never happened suit to load a rom but fails in the initial configuration of error in the settings so I'm stuck on this problem I NEED HELP PLEASE ... in advance many Thank you .
Sorry for my English.:crying:
Hello,
I received my phone two weeks ago (BND-L21 version) and Friday I tried to manually update it to Oreo (with this topic : https://forum.xda-developers.com/honor-7x/how-to/manual-update-to-oreo-beta-emui-8-bnd-t3767044). I don't know what I did wrong but it didn't work (my phone didn't reboot on the stock recovery, only on TWRP). After a few try, my phone wasn't booting anymore, it was stuck on the orange message about the unlocked bootlader and the message "Your device is booting...".
I managed to get it back working with this topic : https://forum.xda-developers.com/honor-7x/development/firmware-updates-link-flash-risk-t3723810. The problem now is that I'm stuck with the chinese firmware (i don't have the Honor animation when my system is booting, I now have an Android logo on a black background). I don't have any Gapps installed and I can't flash anything with TWRP. When I try to flash SuperSU, i have an error extracting ramdisk failure and something with the boot.img.
Now the model of my phone is a generic_a15 and I don't know how to get back on track.
I'm a little bit desperate now, I don't know how to install another firmware. I tried to install this custom rom : https://forum.xda-developers.com/honor-7x/development/openkirin-aosp-8-0-honor-7x-t3746257 but I was stuck on the orange message again.
If anybody knows how to solve my problems, I'll be grateful
Thanks !
[UPDATE] I don't know if someone is reading but now my phone doesn't boot anymore and FRP is locked ?
Call Huawei customer support and get a ticket started to send your phone to the nearest repair center. Best of luck!
Waagic said:
Hello,
I received my phone two weeks ago (BND-L21 version) and Friday I tried to manually update it to Oreo (with this topic : https://forum.xda-developers.com/honor-7x/how-to/manual-update-to-oreo-beta-emui-8-bnd-t3767044). I don't know what I did wrong but it didn't work (my phone didn't reboot on the stock recovery, only on TWRP). After a few try, my phone wasn't booting anymore, it was stuck on the orange message about the unlocked bootlader and the message "Your device is booting...".
I managed to get it back working with this topic : https://forum.xda-developers.com/honor-7x/development/firmware-updates-link-flash-risk-t3723810. The problem now is that I'm stuck with the chinese firmware (i don't have the Honor animation when my system is booting, I now have an Android logo on a black background). I don't have any Gapps installed and I can't flash anything with TWRP. When I try to flash SuperSU, i have an error extracting ramdisk failure and something with the boot.img.
Now the model of my phone is a generic_a15 and I don't know how to get back on track.
I'm a little bit desperate now, I don't know how to install another firmware. I tried to install this custom rom : https://forum.xda-developers.com/honor-7x/development/openkirin-aosp-8-0-honor-7x-t3746257 but I was stuck on the orange message again.
If anybody knows how to solve my problems, I'll be grateful
Thanks !
[UPDATE] I don't know if someone is reading but now my phone doesn't boot anymore and FRP is locked ?
Click to expand...
Click to collapse