Need help to flash Cynogenmod on Nexus i9250. - Samsung Galaxy Nexus

Hi,
I'm new to Android devices. Yesterday I tried to flash Cynogenmod, downloaded from Official site and followed the procedure as mentioned. But after completing all steps and flashing ROM it stuck on loading "CYNOGENMOD" logo and not loading into OS. I removed the battery and tried to restart the device but same problem again. Can someone please tell me what is the reason and how can I solve it. Thank You.

Related

Help please ! my defy doesn't boot

hi, please help me, i am a noob, i tried to install cyanogen gingerbread version on my nonblur motorola defy from romania. i rooted it, i instaled defy 2init, then i runed the cyanogen rom zip from sdcard, it was installed complet. I forgot to wipe before installing. I reboted, the phone was abou half of hour in cyanogen booting logo loading and nothing.... I entered in the phone recovery system and hit wipe. And now i when i power it on it shows motorola red logo and do nothing. What can i do? Please Help ME !!!
First of all, no need to worry, ur defy can be recovered
All you have to do is full flash the original android version you got when you bought the phone using rsd lite, unless you have fully flashed another version in which you qill need to flash that
Read this:
http://forum.xda-developers.com/showthread.php?t=966537
http://forum.xda-developers.com/showthread.php?t=1216982
You should also look around in the forum once. This question has been answered a number if times!

[Q] How to Revive a Huawei Y300-0100?

Hi, i didn't know where to post so i just posted this here since i saw other huawei posts in here. (Moderators pls move if misplaced).
I've got a big problem!
I have got a Rooted Huawei Y300 and i've unofficially unlocked the bootloader with DC-Unlocker successfully, and have CWM Recovery installed!
Now here's the deal, i've downloaded Cyanogenmod 11 (4.4) but after i tried to install it, it stopped halfway with "set_metadata_recursive: some changes failed E:Error in /sdcard/name_of_rom_here" (Status 7).
I tried other CM's getting the same error.
Than i tried to reflash to original firmware (V100R001C00B175) from the huawei website, but since i bricked my phone i cannot move the "dload" folder to internal storage so i tried to place it on my sd-card and booting up using Vol- & Power, the upgrade stops at step 2/2 saying it failed.
I'm very sorry not having a backup of the original firmware before i tried CM out (a very stupid and hasty move).
Does anyone have a solution? The phone is just a week old and i've never bricked a phone before (all my old handsets from samsung's to sony's / htc's) and never failed installing a rom or anything related.
Frankly i never suspected CM to fail flashing since everybody else is succesfull ;-/
kind regards,
Ok here's a update. I managed to install AOKP (4.3.1) so i atleast revived my phone. I'm guessing it was something with CM11.
Anyway moderators you can delete this thread, since i found the solution myself..
Thanks
bricked huawei y300
JMailuhu said:
Ok here's a update. I managed to install AOKP (4.3.1) so i atleast revived my phone. I'm guessing it was something with CM11.
Anyway moderators you can delete this thread, since i found the solution myself..
Thanks
Click to expand...
Click to collapse
can you provide instructions on how revive? mine bricked it got stuck on boot logo after succesfully rooting then i installed chainfire 3d but after that when it reboots it got stuck on boot logo plsss help me on this..

Newbie mistake bootloop after update, help? ;/

I'm really new to this, hopefully someone can help me. I rooted my phone via method 3 in the Zenfone 2 resources thread. I didn't want to update but the phone downloaded it and I thought it might be ok. The phone updated and got stuck in a bootloop. I believe the update was Z00A 2.19.40.22 ( it was like 34mb?). I read all the threads I could and came to this one. I downloaded the preroot image Z00A 2.19.22 because in my recovery at the top ,it said that was what was on it now. Did I make a mistake there, should I have downloaded an older preroot image? I followed all the directions on recovering from a bootloop ( This thread http://forum.xda-developers.com/zenfone2/general/guide-to-apply-ota-bootloop-rooted-zf2-t3127835. The phone booted up after the install and I was able to go through the setup. The phone suddenly froze though and I restarted. It gets past the Asus logo and then is stuck at a black screen with the green led blinking. What do I do from here? Is the phone just dead now? Is there a possibility of saving it?
More info- Before downloading the preroot I did try to factory reset from recovery. I was still stuck with bootloop. If anyone can help me I would really appreciate it a lot.

Ascend P6, stuck on Android Logo until battery dies

Hi all,
please help me, even a factory reset did not work. After turned on, the Ascend logo will come on and it gets after Android logo appears. I have no experience with android, so as detailed iexplanations/ instructions as possible would be very very much appreciated!
thanks a lot!
Katrin
Nobody has any suggestion//? please!
I went to a shop and they couldnt tell me what the problem is.
You could try flashing a custom recovery via adb from a pc, I would suggest looking around at old p6 Q&A threads I did have an old thread with detailed instructions and links for all the old downloads, then try flashing another rom via the twrp recovery.

GT N7100 no start error. No recovery. No Logo

Hello. I have been using Note 2 GT N7100 for over 3 years now. Have rooted the phone and was running a Crdroid custom ROM on it. It did not give me any problem. Nor did I update the ROM since it was running good.
Suddenly yesterday it got stuck on the Samsung logo. Tried restarting it, but it didn't move ahead of the logo.
Today, it shows a grey and white screen. Fully blurred and can't see the Samsung logo too.
Tried going into the recovery mode, but same grey screen appears.
If I take it in download mode, it goes there. But when I try to install any stock ROM, it doesn't work. It shows failed in Odin.
Please help what can be the possible problem?
If any more information is needed, I will provide it.
Any ROM to install or custom recovery?
Please guide what to do?
Also, I am sorry if there is already some post like this. Please let me know
Thanks in Advance!
http://forum.xda-developers.com/showthread.php?t=2154890
Read this guide to fix soft brick
Sent from my SM-N910C
harsh09046 said:
http://forum.xda-developers.com/showthread.php?t=2154890
Read this guide to fix soft brick
Sent from my SM-N910C
Click to expand...
Click to collapse
Hey thanks for the quick reply. Will try and get back to you.
Need a valid link for Recovery Package
[I moved this post to this section that's more apropriate http://forum.xda-developers.com/showthread.php?t=2154890 ]
Hi guys,
Is there a link for the Recovery Package/ROM ? (the one above doens't work)
My phone is stuck on the boot logo and I need to fix it... (I'm a bit noobish..)
I've had already downloaded those files but i'm not sure that there are the correct files to use in the step 4 of this tutorial (Recovery Package/ROM).
- N7100XXUFND3_N7100OXAFND3_N7100XXUFND3_HOME.tar.md5
- N7100XXUFND3_N7100OXAFND3_XEF.zip
Thank you a lot !
Mimo_0

Categories

Resources