Develop Bugs

Collision of recovery issues

Hi,
After flashing CM10 successfully, I apparently flashed the wrong GAPPS zip, so I got the endless "Unfortunately, Setup Wizard has stopped" loop, through which I can only access the time functions using the dropdown.
I tried re-wiping and reflashing, but that apparently just leads to the 0/0/0 nesting issue, and doesn't seem to actually wipe/reflash.
"adb devices" only reads when I'm in recovery mode, and doesn't appear to accomplish anything.
Does anyone have any advice?
Thanks,
Erik

1) Flash the latest CWM or TWRP via fastboot to avoid further "0 folder" issues
2) Go into the recovery
3) Do a full wipe (system, cache, dalvik)
4) Flash the CM10 ROM again or any other ROM you already have on your sdcard and ready to be flashed
5) Flash the correct Gapps if you already have it on your sdcard, or just reboot into the CM10 then download the correct Gapps to flash later via Goo Manager app which finds the correct version of Gapps automatically.
Hope this works

Cannot load image fastboot

I've recently tried to update my radio and bootloader to the latest versions, i was on a custom rom (7.1.1), I've updated the bootloader and radio via fastboot and wiped the cache then rebooted then my phone was stuck in a never ending boot and all is saw was the boot animation, i decided to reboot the phone so i held the power button until it restarted and to avail, the same thing happened. I rebooted to twrp and tried to wipe the cache and dalvik/ART cache and i got an error that it cannot be mounted and the partition size was at 0mb and twrp could not repair it either, and it could not format any of my partitions, so i tried to return to stock and i tried to flash the images from the stock .zip provided by google and it said that it could not load any images. I can access download mode and twrp, any solutions? (someone said to flash the vendor image after flashing both the radio and bootloader images? could that have cause my problem because it did not flash it?
i was on the latest vendor already)
thanks.
EDIT: after continuously trying to wipe the cache & dalvik/ART cache in twrp it worked and it recognized the partitions and it wiped and my device was able to boot, i'm not sure what caused the problem but it boots properly now, although i'm not sure if i can flash in fastboot again, otherwise it works.

Help, accidentaly deleter internal storage.

I accidentally deleted the internal storage, the phone starts up and when I put Pin Sim tells me fatal error, fastboot does not work. Adb sideload works instead, I tried to flash a custom rom, install up to 46% and then just enough
Can I fix it or the phone is dead?

ImAlbyy said:
I accidentally deleted the internal storage, the phone starts up and when I put Pin Sim tells me fatal error, fastboot does not work. Adb sideload works instead, I tried to flash a custom rom, install up to 46% and then just enough
Can I fix it or the phone is dead?
Click to expand...
Click to collapse
Nothing to worry, u assume you are on OxygenOS with TWRP? Try to wipe System, dalvik, cache and internalstorage, then flash the rom. And see if it boots, if not do a factory reset and it should be all fine!

Puddi_Puddin said:
Nothing to worry, u assume you are on OxygenOS with TWRP? Try to wipe System, dalvik, cache and internalstorage, then flash the rom. And see if it boots, if not do a factory reset and it should be all fine!
Click to expand...
Click to collapse
I tried the reset data, the phone started to work.
Now work

[solved] decryption unsuccessful

Hello,
I just unlocked my bootloader after waiting for 30 days.
Then I flashed official twrp via fastboot and booted to it with
Code:
fastboot boot twrp-3.2.3-0-whyred.img
I wiped Dalvik / Art Cache, System, Data, Cache but NOT internal storage
I flashed the PE extended 9.0 rom.
Now when I reboot it wants me to enter a password, I entered my PIN and it says:
Code:
Decryption unsuccessful
The password you entered is correct, but unfortunately your data is corrupt.
To resume using your phone, you need to perform a factory reset. When you set up your phone after the reset, you'll have an opportunity to restore any data that was backed up to your Google Account.
I click on Reset Phone and it reboots into TWRP and then automatically boots the system and again it wants me to enter my password.. and again the decryption unsuccessful message
In my first attempt I wiped everything including internal storage, then rebooted to recovery again and then installed the rom, but that didn't help. So I had to flash MIUI with the mi flash tool, then I did all the setup etc. and tried the method I used above..
But I always get stuck with this decryption unsuccessful.. What am I doing wrong?
//EDIT:
Solved the problem by TWRP -> Wipe -> Format Data -> Yes.
Now I feel stupid haha, I shouldn't do this stuff after working a night shift..

format data is the only way to decrypt

After flashing the sybria 9.0 rom into my mix 2, my phone stuck in the fastboot mode.

After flashing the Syberia 9.0 rom into my mix 2, my phone stuck in the fastboot mode. Every time I tried to reboot my phone, my phone will go right into the fastboot mode. I could get into the TWRP, and I perform the 'wipe' serval times.
This is what happens on my phone:
wipe the system---- flash the rom ------ reboot ----- fastboot mode
I don't know what happens with my phone. Pls help me guys:crying:

Could I try to use the official miui fastboot update via the mi flash?

Try installing again with "Clean Flash". Wipe System, Cache/Dalvik and format Data (don't wipe data).
Backup your data first, because your data will destroy.

I believe you should already have the ROM, Firmware and Gapps into internal storage.
Now boot to recovery.
Wipe Data (if u are decrypted, format data)
But be aware that formatting Data means that you have to again copy everything back to internal storage using adb. So my advice is to just wipe and see if that works out.
Install Firmware, ROM and Gapps zip.
Order of installation should be same.
Reboot - 1st boot may take some time.