Develop Bugs

[Q] Rom Manager - Failed to Seek

Anytime I try to do anything through Rom Manager (flash a ROM, nandroid backup, etc.) upon rebooting into recovery, I get a white triangle with an yellow exclamation point. After pressing the power button, the following text is revealed along with the Clockwork Recovery Menu.
Finding update package...
Opening update package...
Verifying update package...
E:failed to seek in /cache/update.zip (Invalid argument)
E:signature verification failed
Installation aborted.
If I select advanced->Reboot Recovery after receiving the error, the device reboots. After this second reboot, the process continues as it should have after the first reboot. I've tried downgrading the version of my Clockwork Recovery, but it seems to have no effect.
Any ideas?

...
I believe the standard array of initial questions would be:
1) Did you flash S-OFF?
2) Is your card FAT32 formatted
3) Try redownloading the file using a different browser (to ensure a cache doesn't deliver the same update.zip without trying)

jdmba said:
I believe the standard array of initial questions would be:
1) Did you flash S-OFF?
Click to expand...
Click to collapse
Yes.
jdmba said:
2) Is your card FAT32 formatted
Click to expand...
Click to collapse
Yes.
jdmba said:
3) Try redownloading the file using a different browser (to ensure a cache doesn't deliver the same update.zip without trying)
Click to expand...
Click to collapse
This failure isn't specific to any one file. Besides, I don't think it's a corruption of the file since it works when I select "reboot recovery" from the first failed attempt. In fact, this even happens when choosing "Backup ROM" from ROM Manager.
On a side note, I've tried wiping cache in ROM Manager as well.

Toggle Signature Verification and/or is d/l corrupt?
In CWM, have you tried toggling the on or off setting for the signature verification, as well as the other toggle?
Also, I read some superb advice here:http://http://forum.xda-developers.com/showthread.php?t=765930
check out the advice in post # 285 and see if that fixes you up.

Everyone seems to think my downloads are corrupt. That is definitely not the problem. If they were corrupt, they wouldn't function after the first reboot. They would continue to fail. Let me try explain my problem another way...
Here's my device setup...
Radio - 2.15.00.07.28
Kernel - King's BFS #4
ROM - SR Vanilla RC 2
CWM Version - 2.5.0.5
ROM Manager Version - 2.0.2.6
Here's a process I'm following...
1. Open ROM Manager
2. Clear Download Cache (Just to be sure!)
3. Select Backup Current ROM which causes reboot into recovery.
4. Receive the error which I outlined in my first post. *NOTE* I have not downloaded nor chosen to flash ANY update.zip files. *NOTE*
5. Open the advanced menu in CMW and choose "Reboot recovery" which causes the phone to reboot into recovery.
6. The backup progresses like it should have after the first reboot.
Again, the process above does not involve the use of any downloaded update.zip files. No ROMS, no Kernels, etc.
Does ROM Manager create it's own update.zip file stored in /cache to execute whatever function it needs to after reboot? It appears that might be the case.
I've attempted to reinstall ROM Manager and downgrade to an early version of CWM in ROM Manager. Neither seem to have helped.

I had the same problem trying to flash the latest leedroid
I entered recovery, de-selected signature verification and then flashed the rom through recovery mode.
Flashed normally and up to now it looks like it worked (waiting for first boot)
Hope this helped

Both signature verification and script asserts are toggled off. This is why the update.zip will flash after the second reboot into recovery and manually.

In recovery, is cache, data, or system mounted? If so, can you unmount any/ all, and reboot?
Sent from my ADR6300 using XDA App

I just started having this problem today, at least i noticed it today. It acts as if the signature verification is enabled the first try and disabled the second time. I can't find ANY way to fix this but reboot recovery and it works... If anyone finds a solution, please post.
*edit* I also noticed the "Fix Permissions" utility doesn't work in ROM Manager. Dont know if this is related or not.

PIYIRIO said:
I just started having this problem today, at least i noticed it today. It acts as if the signature verification is enabled the first try and disabled the second time. I can't find ANY way to fix this but reboot recovery and it works... If anyone finds a solution, please post.
Click to expand...
Click to collapse
Did you change anything today? I found someone in the SR ROM thread today that started having the same problem.

No, only an app and removed it. I dont know how long it has been broke since I haven't used it since SR 3.0rc1.. got tired of the reminder for rc3 and it wouldn't automagically run the install.zip.

Interesting.... Please post as this shakes out.
Sent from my ADR6300 using XDA App

I have this same issue, I think it's an issue with Rom Manager. No matter what I try to do from there (Reboot to Recovery, make backup, flash zip, etc.) I get that string of messages.
If I download a file from ROM manager to be flashed, I have to move the file to the root of the sd card before booting to recovery for it to flash correctly. I have just gotten used to doing it this way.

srt4mn said:
I have this same issue, I think it's an issue with Rom Manager. No matter what I try to do from there (Reboot to Recovery, make backup, flash zip, etc.) I get that string of messages.
If I download a file from ROM manager to be flashed, I have to move the file to the root of the sd card before booting to recovery for it to flash correctly. I have just gotten used to doing it this way.
Click to expand...
Click to collapse
Me as well

PIYIRIO said:
*edit* I also noticed the "Fix Permissions" utility doesn't work in ROM Manager. Dont know if this is related or not.
Click to expand...
Click to collapse
If you look in the OP for the SR ROMS, you'll see that a known issue. He includes a fix_permissions binary instead.

I've reached out to the developer. Hopefully we will hear from him soon.

Can you guys try clearing your download cache, and then reflashing recovery?

Possible workaround
Koush said:
Can you guys try clearing your download cache, and then reflashing recovery?
Click to expand...
Click to collapse
Cache wipe have been tried, see post #3.
I have some info that may be valuable:
This evening I rooted my Desire (SLCD) using Unrevoked 3.14 and recovery-clockwork-2.5.0.7-bravo.img I realize this is the incredible forum but hold on.. hear me out
I observed the _exact_ same behavior:
- Yellow eclamation + second reboot to recovery would run backup, also happened when selecting "Reboot Into recovery" in RomManager (RM)
- Tried DL cache wipe in RomManager,
- Tried reflash of recovery
This fixed it for me:
- Re-root via Unrevoked 3.14 using recovery-clockwork-2.5.0.1-bravo-slcd.img
- Re-flash CM (this may be optional, I don't know)
- Boot ROM and start RM just to have it tell me I need to install recovery (obviosly didn't detect my 2.5.0.1-bravo-slcd)
- Allow RM to flash 2.5.0.7-bravo via download
- Now "Backup ROM" and "Reboot to recovery" works as intended
- RM reports 2.5.0.7-bravo installed, recovery booted (via RM) is 2.5.0.7-bravo BUT recovery booted using HBOOT (back+power on Desire) is 2.5.0.1-bravo-slcd (!)
Note: Incredible users should _not_ use -bravo recovery images(!) just outlining how I made it work to help you find a solution

Koush said:
Can you guys try clearing your download cache, and then reflashing recovery?
Click to expand...
Click to collapse
Worked for me. Thanks Koush!
Sent from my ADR6300 using XDA App

Didn't work for me.. I've tried everything that I can think of. Different SD cards, i've formated /data/ /cache/ and reinstalled..
i'm using virtuous 2.7

help cm6.1 google apps

I need help I can't get the Google apps to work with 6.1. I wipe data and both cache's and flash rom then I flashed gapps when phone starts no Google apps are there so I manually. Install the apk. And all I get is loop back to home or Fc. I downloaded the correct. Zip for the evo off the wiki please help flash other roms with no issues. Gmail opens but can't find server market app just loops to home screen

Make sure you are using the following gapps:
12/11/10 GAPPS
I'm not sure which one you used, but it may be outdated.

Do the following:
1) Wipe data and cache from your phone via recovery.
2) Flash and boot a rooted stock ROM.
3) Wipe data and cache from your phone via recovery.
4) Flash CM 6.1 from recovery.
5) Flash HDPI Gapps 12/11 from recovery.
6) Boot, wait for home screen.
7) If you have problems, run this command:
Code:
adb logcat > %userprofile%\Desktop\logcat.txt
and post the text file to pastebin.com, and then link it to us here.

recovery loop problem

I now cannot get into an operating system. The device loads FFF 1.4a says "booting" goes blank for a little while then comes back to the 1.4a screen and says "booting" again and loads up TWRP. This is how I got to this point:
I recently decided to go from an older CM7 rom to a new jb one.
Because I had an older version of FFF and had a CWM recovery, I downloaded the new version of FFF (1.4a) and the newest version of TWRP (2.2.0) (flashable zip file) as well as the new jellybean rom and jb gapps. I checked all md5s prior to doing anything.
I booted into recovery and created a backup in CWM. I then cleared cache and Davlic cache and installed FFF 1.4a. I then rebooted to CM7. After loading CM7, I rebooted into recovery, cleared cache and davlic cache and installed TWRP 2.2.0. I then rebooted into CM7, rebooted into recovery. I then cleared cache, davlic cache, factory reset, and wiped system. I then installed CM10 and jb gapps and attempted to reboot to system, but have not ever been able to get there.
I have tried installing the CM7 rom I had before, no difference, CM9 rom, no difference. I tried to use a recovery file I had, still no good.
Adb does not seem to behaving properly as well. I can't seem to be able to get the device into fastboot mode for one. In TWRP I can see the device as the following:
4B8E000600000001 recovery
when I try to change the bootmode, this is how it behaves:
adb shell
~ # <-[6n idme bootmode 4002
/sbin/sh: idme: not found
KFU also seems to not be much help at changing the bootmode. I have tried older version as sited elsewhere (0.9, 0.3), but these fair no better.
Also, In my haste and desire to get this working I thought,"maybe there is some conflict with the sd card", so I wiped that only to realize while wiping that I never backed up my recovery files, "doh!".
Also, I have full battery.
I am a noob, so I could have done anything wrong. Any help would be appreciated.

When you get to the bootloader screen select boot normal in the boot menu by quickly depressing your power button a few times if it does not boot normal then flash the bootloader again in recovery http://forum.xda-developers.com/showthread.php?t=1632375 also you will have to mount your sdcard in twrp to do so make sure there are no checks in the boxes of system and data then mount transfer 1.4a bootloader a new ROM and gapps then unmount flash bootloader reboot it get back to twrp wipe factory reset wipe cache wipe dalvik wipe system flash ROM flash gapps select reboot if prompted select system see where your at after that

http://forum.xda-developers.com/showpost.php?p=29186989&postcount=157

Thanks
Thepooch said:
When you get to the bootloader screen select boot normal in the boot menu by quickly depressing your power button a few times if it does not boot normal then flash the bootloader again in recovery http://forum.xda-developers.com/showthread.php?t=1632375 also you will have to mount your sdcard in twrp to do so make sure there are no checks in the boxes of system and data then mount transfer 1.4a bootloader a new ROM and gapps then unmount flash bootloader reboot it get back to twrp wipe factory reset wipe cache wipe dalvik wipe system flash ROM flash gapps select reboot if prompted select system see where your at after that
Click to expand...
Click to collapse
Thanks, I will try this when I get a chance.

Thanks
kinfauns said:
http://forum.xda-developers.com/showpost.php?p=29186989&postcount=157
Click to expand...
Click to collapse
Thanks for this as well, did not see this information anywhere else.

fixed
Yep, it was a bad FFF flash. All good now. Thanks for the help.

Boot loop after 4.4.2 update and Clockworkmod install

Stuck in a bootloop. Here's my story.
Updated to 4.4.2 earlier today.
Tried to root my Nexus 7 later after the update. Here's what I did:
rebooted into bootloader with adb (adb reboot-bootloader)
unlocked the bootloader with fastboot (fastboot oem unlock)
flashed clockworkmod using fastboot (this is the file i downloaded and flashed: -http://download2.clockworkmod.com/recoveries/recovery-clockwork-6.0.4.3-flo.img)
rebooted into recovery
selected "install zip>choose zip from sdcard" (trying to install supersu.zip file that I had loaded onto the internal memory)
Here's where I ran into trouble. After selecting "choose zip" nothing happens, and a message shows up on botton of the screen that says "E: Can't mount /sdcard"
So I can't install anything from clockworkmod.
I rebooted into bootloader, tried to re-flash using fastboot - "device not found"
I tried to reboot the device into android - bootloop animation
I tried wiping data, cache, factory reset, dalvik chache, etc from recovery - still getting bootloop animation
Any ideas?

Ok, I wiped/deleted sdcard data from clockworkmod and I managed to get it to boot.
That's deadly but I still don't have root, which was the point of this in the first place. Anyone know where I went wrong?

Strange. I did pretty much the exact same procedure and it worked for me.
Sent from my Nexus 10 using xda app-developers app

So, I flashed TWRP.
Tried installing SuperSu from there. This worked slightly better than Clockworkmod Recovery, it at least could read the internal storage, and allowed me to select the supersu.zip file. But I get the following error when I try to install it:
E: Unable to open zip file
Error flashing zip 'sdcard/Download/UPDATE-SuperSU-v1.80.zip
Not sure what's happening here.... May have to do with the 4.4.2 update? Maybe I'll try flashing the 4.4.2 factory image and then retrying the above steps.

I also did pretty much the same. I had a new Nexus 7 2013. The very first thing I did was to update to 4.4.2 through OTA before I went to rooting procedures:
Unlock bootloader (data was wiped because of it)
Flash TWRP
Flash superuser.zip file through TWRP
Everything worked fine.

Cannot update 3.2.8 to 4.0.1 without getting dm-verity warning

So i had 4.0.1 rooted before. I decided to return to stock by flashing full 4.0.1 on TWRP. That's when I started getting the error. I flashed 3.2.8 on stock recovery 2.0 and dm-verity error is gone. But installing 4.0.1 on stock recovery 2.0 results to dm-verity error again. I cannot use adb sideload as my computer is too slow
More details: before, I successfully updated my OP3 with 3.2.8 to 4.0.1 without the dm-verity warning. After that, I flashed blu_spark's TWRP v11, swiped to allow modifications and rooted it with SuperSU 2.79 and flashed some mods, still no warning. Yesterday, I decided to return to full stock. I updated my TWRP to the unofficial 3.0.3-0 (the official one wasn't available yesterday yet), wiped system, cache, and data excluding internal storage, then flashed 4.0.1. The dm-verity warning started to show. I followed your guide and other guides here on XDA, I cannot fix it. The only solution I found is to rollback to 3.2.8, I installed the zip file on the stock recovery from your guide (flashing the recovery before). I'm having problems with adb sideload, PC lags so much and sideloading never finishes, so what I do is copy the zip file in the internal storage. After I flashed 3.2.8 and rebooted, the recovery was replaced by the V1.0 version that doesn't have the function of installing zip from internal storage, so I flashed your stock recovery again. Booting to the new recovery, I flashed the 4.0.1 zip and the dm-verity warning shows again.
Right now, my OP3 is on 3.2.8 with stock ROM, kernel, and recovery. No dm-verity warning. I don't know how to update to 4.0.1 without getting that again

Simple. New bootloader added that warning and the old one never had a dm-verity nag screen. Flash it and ignore it. It shows up due to TWRP installed.

Check the freedomos thread and download the 3.2.7 fw and flash with TWRP and its gone, I am not using the nougat fw on 4.0.2, always make nandroid backups

install beta 7 firmware

Don't bother! It's not worth it! It's just a stupid message!

I have tried by following these steps (I initially had twrp-3.0.2-1.28-oneplus3 installed):
1. booted to TWRP recovery;
2. copied recovery_OBT8N.img to phone;
3. installed stock recovery_OBT8N.img via TWRP as image > recovery;
4. booted to stock recovery (directly from TWRP);
5. while in stock recovery, I have wiped the phone (for a clean flash);
6. installed OxygenOS 4.0 (N) via ADB;
7. once the installation got completed, I rebooted the phone;
8. once the phone started, I did not finished the startup setting;
9. switched-off the phone and booted in fastboot mode;
10. flashed TWRP recovery - twrp-3.0.2-1.28-oneplus3 again;
11. switched off the phone;
12. started the phone in TWRP recovery; TWRP asks for a password to decrypt - ignore it;
13. wiped the phone (I wanted to do so to make sure it is a really clean install, even if this wipes everything);
14. rebooted again to TWRP recovery; this time I did not get any password prompt;
15. from TWRP, I copied SR1-SuperSU-v2.79-SR1-20161221223537.zip to phone storage (while connected to my laptop, obviously);
16. installed SR1-SuperSU-v2.79-SR1-20161221223537.zip, wiped data & cache and rebooted system;
17. everything went fine, with no dm-verity and rooted.

It will Keep showing Because You flashed Oxygen OS from TWRP . Try flashing this just after flashing the OS .
it will disable DM verity and disable force encryption .

cpt.macp said:
It will Keep showing Because You flashed Oxygen OS from TWRP . Try flashing this just after flashing the OS .
it will disable DM verity and disable force encryption .
Click to expand...
Click to collapse
Please try this method. Tested and it works for me.
step
Assuming your bootloader is unlocked. Copy
1. fastboot boot twrp twrp-3.0.2-1.28-oneplus3.img
2. Now you will be in TWRP, perform wipe -> Format Data, perform Wipe -> Advanced wipe "All folder" except USB-OTG
3. Reboot to recovery
4. adb sideload OnePlus3Oxygen_16_OTA_037_all_1701041839_401.zip (if adb cannot read, because filesize too big. Use laa_2_0_4.zip to fix the adb.exe first.)
5. After adb sideload done, reboot to TWRP immediately, enable MTP to copy the file: no-verity-opt-encrypt-5.1.zip into your internal storage and install no-verity-opt-encrypt-5.1.zip immediately.
Then everything will be fine.

bkcheah75 said:
Please try this method. Tested and it works for me.
step
Assuming your bootloader is unlocked. Copy
1. fastboot boot twrp twrp-3.0.2-1.28-oneplus3.img
2. Now you will be in TWRP, perform wipe -> Format Data, perform Wipe -> Advanced wipe "All folder" except USB-OTG
3. Reboot to recovery
4. adb sideload OnePlus3Oxygen_16_OTA_037_all_1701041839_401.zip (if adb cannot read, because filesize too big. Use laa_2_0_4.zip to fix the adb.exe first.)
5. After adb sideload done, reboot to TWRP immediately, enable MTP to copy the file: no-verity-opt-encrypt-5.1.zip into your internal storage and install no-verity-opt-encrypt-5.1.zip immediately.
Then everything will be fine.
Click to expand...
Click to collapse
I was not having any Issue . But Surely Your Help and concern is much appreciated
and Yes this is also one of the way to remove DM verity and use the zip

Currently using:
ROM - FreedomOS-2.1
TWRP - blu_spark_v11-oo3
Phone - Encrypted
I have the DM-Verity message at boot. Would reflashing FreedomOS-2.1 Through TWRP & then immediately flash no-verity-opt-encrypt.zip get rid of the message?
Thanks