I tried searching the threads and I wanted to make mine a little more specific, hopefully it's not too closely related to another thread. So I made a super simple little battery Widget and I want it to do multiple color changes for certain conditions. 1. While charging, I want it to be light blue. 2. Once fully charged but still plugged in, I want it to be bright green. 3. The default color I made it is a dark green, so once battery is below 50% turn yellow, and below 10% turn red. So I am trying to link multiple conditions, but it only seems to recognize the one first in order. This is my string of conditions:
$#BSTATN#!=2?[cf]#darkgreen[/cf]:[cf]lightblue[/cf]&&#BSTATN#!=5?[cf]darkgreen[/cf]:[cf]lightgreen[/cf]&&[cf]$#BLEVN#<10?red$[/cf][cf]$#BLEVN#<50?#yellow$[/cf]
Related
Hi guys,
is it possible to change the color of the LEDs?
My intention: Normally the LED glows green, when I missed a call or something like that it glows orange and when the accu is nearly empty it glows dark red.
Often I see the green LED in the corner of my eye and think it's orange - although I know that it's not.
So: Is it possible to change the color of the normal alarm LED into dark red? I tried no2chem_nueLED but it doesn't show the dark red LED.. :-/
Thanks in advance!
sorry to hijack the thread but is there a way to stop the led flashing all the time? the led next to the internet explorer button is constantly flashing green
hey,
Yeah I've been trying to figure out if there's a way as well. The same thing happens to me all the time. Whenever I see the green light from the corner of my eye I think it's orange too .
Anyone willing to shed some light on this?
@HungryHippo
The green lights indicate that your phone is currently connected to the Phone Network... it doesn't flash when you're out of ranch.. I don't know how to turn it off other than putting your phone in Flight Mode..
Hi there...
I think this thread is in the wrong place but ill still help
Use a regestry editor to change the leds
Disable flashing service LEDs
[HKLM\Drivers\BuiltIn\AllLEDMgr]
By doing this It WILL dissable the phone from vibrating!
As for changing the LED's colour I dont know how to but I will have a look!
Use the wiki as it is your friend!
How do you get the thing to be ON? The Green light used to be on when on charge......sadly I haven't seen the light ON now for the last 2 weeks despite it being on charge and does charge too?
Do I need to use the same registry hack to get the light to come ON?
HELLLPPPPPPPP
SPV_M3100
PAYS 3.5 ROM
HungryHippo said:
sorry to hijack the thread but is there a way to stop the led flashing all the time? the led next to the internet explorer button is constantly flashing green
Click to expand...
Click to collapse
Weird ... the same thing happens to me, too! I thought it was my aging eyes ... though I KNOW I'm not color-blind. But yes, when seen with only peripheral vision, it often appears to be the amber color. Very strange perceptual event here.
u could try using the nueled software in the dev and hacking forum not sure if it works like it should tried it once but u can always try it
yeh, nueLED has your best options...here's the thread:
http://forum.xda-developers.com/showthread.php?t=371391
The reason your peripheral vision sees a different colour is that the LED isn't actually one LED - it's two. Probably red and yellow. This allows it to display
3 different colours, ie.
R = Red
Y = Yellow
R+Y = Green.
The R+Y is probably created by high-speed alternating between red and yellow. Your peripheral vision detects one colour only, probably because there are far less colour receptors at the side of your visual cortex than near the centre and they only register the one colour. As soon as you look directly at it, more rods/cones come into play and your brain then interprets what it's seeing as the blended colour, green.
The above isn't exactly correct, but it's close enough so you get the idea....
Amber
Hi!
I have another problem/request. Since I am not with my phone all the time I would like the Amber LED to flash if I have a missed call for indefinite time (until I check the calls) and not only for a limited period (and then changing back to green). It was already implemented in TNT6.0 SE ROM.
Is there only a question of some registry change (and which)?
antonof said:
Hi!
I have another problem/request. Since I am not with my phone all the time I would like the Amber LED to flash if I have a missed call for indefinite time (until I check the calls) and not only for a limited period (and then changing back to green). It was already implemented in TNT6.0 SE ROM.
Is there only a question of some registry change (and which)?
Click to expand...
Click to collapse
If you go to settings>sounds¬ifications>notifications>Phone:missed calls
You can change the Flash Light For value to NO LIMIT. Default is 15 mins.
Hope this helps
Dave
Sure it helps.
Thanks a lot.
douginoz said:
The above isn't exactly correct, but it's close enough so you get the idea....
Click to expand...
Click to collapse
Especially since yellow+blue=green.
hmm
yeah... nueLED doesn't work on my hermes. It doesn't give me the address of the red LED...
But the LED light does not light up AT ALL?
Has the LED blown?.....Didn't think thta was possible since its not a Bulb?
Hello,
I just got a touch pro2 lastweek and I am beating my head trying to figure out what the deal is with the status notification LEDs
I see one to the LEFT of the earpiece/speaker that flashes green every few seconds and then just stops - all the flashing stops. I'm thinking the bliking stops when the phone goes to sleep. So i press the power to wake the phone - but the flashing doesn't come back. I was thinking this is the network/signal indicator but doesn't seem that way.
I see another that's to the RIGHT of the earpiece/speaker that doesn't go on at all.
So no way to tell if the phone is on wifi network or if bluetooth is on (without obviously waking the phone up and checking on screen). I'm looking for a way to see status without touching the phone - like my old HTC TyTn (rest in peace!)
It turns red when you charge you're phone.
It turns green when you are fully charged (with the charger still in)
It blinks green when you have a new message/e-mail/missed call.
It blinks red when you're batterie is almost empty.
That are the basics
thanks! that's about what i seemed to have gathered too... what about that fake light like thing to the right of speaker? never lights up?
and no bluetooth/wan notification ten, right?
armedmetallica said:
thanks! that's about what i seemed to have gathered too... what about that fake light like thing to the right of speaker? never lights up?
and no bluetooth/wan notification ten, right?
Click to expand...
Click to collapse
thats the light sensor for the screen
adjusts brightness depending on how much light is hitting the phone
Below is a description of the LED lights straight from the manual that came with my Tilt2.
* The Notification LED shows a:
Flashing green light when there are new SMS, MMS or email messages, missed calls, or reminders.
Solid green light when the device is connected to the power adapter or a computer and the battery is fully charged.
Solid amber light when the battery is being charged.
Flashing amber light when the remaining battery level reaches below 10%.
jcterry said:
Below is a description of the LED lights straight from the manual that came with my Tilt2.
* The Notification LED shows a:
Flashing green light when there are new SMS, MMS or email messages, missed calls, or reminders.
Solid green light when the device is connected to the power adapter or a computer and the battery is fully charged.
Solid amber light when the battery is being charged.
Flashing amber light when the remaining battery level reaches below 10%.
Click to expand...
Click to collapse
That's pretty much exactly it. There is a program floating around that allows you to change the light and customize the reason it flashes, but I think it's just fine the way it is .
it also flashed green then the red light really quick when its overheating :O
thanks for the quick replies folks.
I saw that in the manual too - but i never go by the manuals! i can't count how many times my manuals have been wrong about a particular function.
it's a disappointment since the older Tytn was much more friendly about the notifications. but i'll deal with it.
as far as that being a light sensor - i think it makes sense. I'll try trick it to see what I notice. Then I'm guessing it's the proximity sensor that's around the HTC logo? I think I was in the sun when I saw it but there's some sort of sensor around there. I figured that's the light sensor. perhaps not.
Thanks again!
Hey guys, what's your Light Flow flash rate at? I currently have everything on "Fast" but I want something that is somewhat slower, gets to the brightest point of the LED and stays there for like a second or two and then starts fading again. When I try "slow" or anything it merges the LED's for different notifications together.
On charge I use "fast" - on battery I use "latest."
You need to select 'custom LED flash rate' and then input your own numbers. Mine is set to 230,1070. The first number is how long the light stays on, the second is how long it's off. Keep testing numbers till you get the effect you want.
So I've been using my Galaxy Nexus for quite some time and have had no issues with the LED notification light. Last week while on a drive I noticed that the light didn't seem to be showing the correct color. Green was more turquoise all of a sudden, white was pink, and a few other oddballs. It was in my car cradle the whole time, its never ever been dropped nor exposed to water. I've reinstalled Lightflow, completely wiped the phone, installed a new OS and nothing seems to fix the light. Tonight I tried LED Tester and sure enough, the colors didn't match what they were supposed to be and the turquoise light that is supposed to be green almost has a stutter or something to it . Now last week when I first noticed the problem I disabled lightflow, and a few minutes later the green light started flashing properly, almost like the phone was trying to make up for its mistakes. I reinstalled lightflow, and of course, green and white still don't work. I've tried other LED programs and nothing will bring green back
I can only assume this is a hardware issue and the green working all of a sudden was just a fluke. I've put the light on using LED Tester and given the phone a few flicks, giggled the USB connector GENTLY, thinking maybe a lose wire was the culprit and doing that would temporarily make it work, reinforcing that something is loose but no, it just won't work any more.
Any suggestions?
Maybe I have an issue with my phone, maybe all Zenfones are like this? I can see a light blue line (1/8" maybe) going down the screen, but it only shows up on certain colors (Like a very faded lollipop blue color)
Does anyone else have this, or do I have a defective phone? I've reached out to ASUS via e-mail and still waiting for a reply. This is defintely hardware based per my testings, and again, you almost cannot see it with a complete white background...Only certain colors show the line...I'll try to grab of photo when I'm home...
[img=http://s30.postimg.org/v7v763d99/20150923_155329.jpg]
Edit: It's reaaaally hard to see with a picture, but it exists