Develop Bugs

Notification LED

My very first phone was a old Samsung that had a bright blue LED that flashed letting me know I had a new text message or voicemail or missed call etc. (You could see that thing flashing a mile away)
That is one feature I really miss because I often leave my phone sitting on my desk that Im not around very much and repeating notification tones are out of the question.
Is there a way to use the service LED's as notification lights?

I will PM you a link to get a good one... Just check your messages...

#2! said:
My very first phone was a old Samsung that had a bright blue LED that flashed letting me know I had a new text message or voicemail or missed call etc. (You could see that thing flashing a mile away)
That is one feature I really miss because I often leave my phone sitting on my desk that Im not around very much and repeating notification tones are out of the question.
Is there a way to use the service LED's as notification lights?
Click to expand...
Click to collapse
This is a fine program.

This program is cool. Thanks. Only problem is the flashing LED alert is too much like the phone service LED. Its stuck in my brain that slow flashing green light is meaningless. Any way to make it use the different colored LED's ??

#2! said:
This program is cool. Thanks. Only problem is the flashing LED alert is too much like the phone service LED. Its stuck in my brain that slow flashing green light is meaningless. Any way to make it use the different colored LED's ??
Click to expand...
Click to collapse
I know.. I'd like to see the low battery light and the bluetooth light flash alternating.

I think that is possible but I think you might have to edit some registry for that to occur...

what colors are all there? blue, green and orange? or are they multicolor led?

#2! said:
This program is cool. Thanks. Only problem is the flashing LED alert is too much like the phone service LED. Its stuck in my brain that slow flashing green light is meaningless. Any way to make it use the different colored LED's ??
Click to expand...
Click to collapse
You can stop flashing the green light.
Only when you have a message.

#2! said:
This program is cool. Thanks. Only problem is the flashing LED alert is too much like the phone service LED. Its stuck in my brain that slow flashing green light is meaningless. Any way to make it use the different colored LED's ??
Click to expand...
Click to collapse
I know that if you use a DontForget with PPC you get the choice of colour of LED "from reading there website" but not sure if possible on SP?
May be worth asking in general forum if anyone knows the reg settings needed?

This is not possible to manage LED (only blinking / off) on HTC s620.

jhwo99 said:
You can stop flashing the green light.
Only when you have a message.
Click to expand...
Click to collapse
That might work. Didn't think about that.
I still think it would be really cool if we could figure out how to get all the colors to flash or cycle through a patten.

I will try to look into it and see how it goes.

[Help] Regarding the LED light on top of phone.

First of all. I would like to know, if the LED light can change to different colors other than the Green, orange(?), and red?
If so, is there anyway that I can tweak the led light on the top of the rhodium to turn a certain color when we have a notification waiting? (New Email, Text message, ect.)

i guess the hardware device can't support ....

afaik the LED under that is a standard 3 pin Green/Red LED. The orange is created by combining the two. So no there aren't really any other colour options. Aside from maybe getting greener or redder shades of orange.

There was a great app written for the Kaiser called Kaiser notification that allowed you to change the color of the led for different notifications. I think this is what you are asking about is it not?

I'd love to know how to change the colors for particular notifications!

I'd love to know if there is anyway to DISABLE the green blinking that goes on and on indicating reception.
There was superb app for my old Titan from no2chem... anything similar for our TP2's?

rajuabju said:
I'd love to know if there is anyway to DISABLE the green blinking that goes on and on indicating reception.
There was superb app for my old Titan from no2chem... anything similar for our TP2's?
Click to expand...
Click to collapse
Interesting, my Tilt 2 does NOT blink for reception, bluetooth, or GPS, unlike the original Tilt which blinked incessantly without KaiserNotification set up.
Maybe ROM differences?

Led Changer

Is there a program to change what color led flashes when I get a message and etc?

theres no such program at this moment AFAIK and youre only limited to two, Green and Amber, i dont think theres a Red?

Ahh really? Might be sleep deprivation but I swear I saw red
Alright, just wondering if anyone had made it so I could make it flash Green then Amber and cycle that when my GF text's me. It'd be useful to know when I actually need to check my phone

[Q] evo second led?

Anyone know what second led located on the right side of the speaker on the evo is for? I never actually seen it used. I know the main one notify you when you missed a call, have email, text, ect... But what is second one for? Only reason I know is there is before 2.2 I would use a led/flash light app and whenever I would switch it on I would see the led blink green briefly. I also noticed that my wife's hero seem to have a second led which you can also see located to right. Anyone have a clue?

It's a dull red LED and on the right side, not as bright as the left side Green is when it is fully charged for example.
No idea what it is for, but I have the sinking feeling in my stomach that I know what it is for...
Yea, my Evo has it turn on red when charging
I've searched everywhere for what it actually means, but haven't found anything for the Evo.

There seems to be the orange one while it is charging, and if it completely dead and won't turn on, and maybe if there is some sort of error, then it blinks red.

I think I recall it flashing when my evo decided the battery temp was too high to let it charge.

asj2583 said:
Anyone know what second led located on the right side of the speaker on the evo is for? I never actually seen it used. I know the main one notify you when you missed a call, have email, text, ect... But what is second one for? Only reason I know is there is before 2.2 I would use a led/flash light app and whenever I would switch it on I would see the led blink green briefly. I also noticed that my wife's hero seem to have a second led which you can also see located to right. Anyone have a clue?
Click to expand...
Click to collapse
On the Hero, its the light sensor. No idea on the Evo though. I don't even see it...

Why do people make stuff up when they don't know the answer?
http://forum.xda-developers.com/showthread.php?t=697430
Left is for charging (orange,green), notifications (green), low battery (orange), and overheating (orange and green flashing). Right is the wimax LED but we don't know what causes it to turn on or off. I've seen it briefly flash once.

Perhaps since don't have 4g in my area won't be able test it. Like said in my first post I saw it go off when using an led/flash light app and it was green.

i always thought it would turn on when you were connected to 4g...

Just tested and it doesn't turn on when 4g is connected.

jasonrush said:
Just tested and it doesn't turn on when 4g is connected.
Click to expand...
Click to collapse
wonder what its for? any devs out there have a clue or could maybe put it to use...

I recently installed CM 6.1 w/Handscent and the second LED on the right side of the speaker grill now lights up whenever i receive a notification. It is a different shade of green than the LED on the left. It has a 5 off 1 on cycle. I actually cant find any settings for it anywhere on my phone.
Also I cant get the original LED to light up for notifications.

Its the "WiMax" LED. Actually 2 LEDs, a green and a red, which can both be enabled at the same time to make orange. By default, it never seems to light up even with 4G on.

robtheslob said:
I think I recall it flashing when my evo decided the battery temp was too high to let it charge.
Click to expand...
Click to collapse
yeah when the battery temp is to high it flashes on the left side..but the right side seems to be for notifications as well....based off the MIUI Rom it blinks when i get a noticfication...no idea if its for just texts or what, but i know when i get a text the green led on the RIGHT blinks..not the left one..at least not on the rom im running..could be different i know on all sense roms it never worked..
anyone if the led on the RIGHT can change colors or anyother function?

This. It never seemed to do anything and a lot of people didn't know it was even there. Then someone took advantage of it and used it for notifications and now it is in CM6. Original thread somewhere in themes apps section.
strung said:
Its the "WiMax" LED. Actually 2 LEDs, a green and a red, which can both be enabled at the same time to make orange. By default, it never seems to light up even with 4G on.
Click to expand...
Click to collapse
SWYPED from my SUPASONIC

strung said:
Its the "WiMax" LED. Actually 2 LEDs, a green and a red, which can both be enabled at the same time to make orange. By default, it never seems to light up even with 4G on.
Click to expand...
Click to collapse
Perfect answer.^^
Look up WiMax notifier if you want to control it.
or http://forum.xda-developers.com/showthread.php?t=746732<-- Go there.
The app didn't work on my CM6, but CM6.1 has control for that LED built in.

yeah i noticed this too, on CM6.1 it blinks a darker green than the left.

[Q] Light flow/LED problem

I just switched from a Nexus 4 to a HTC One M8 GPe. On the Nexus 4 I used Light flow very much with many colors and blink patterns to be able to identify what was happening without turning on the screen. Now when I have installed Light flow on my M8 it's only possible to choose from 4 colors or something and no blink patterns.
Is this possible to fix?
Great phone but this really bothers me...

djr83 said:
I just switched from a Nexus 4 to a HTC One M8 GPe. On the Nexus 4 I used Light flow very much with many colors and blink patterns to be able to identify what was happening without turning on the screen. Now when I have installed Light flow on my M8 it's only possible to choose from 4 colors or something and no blink patterns.
Is this possible to fix?
Great phone but this really bothers me...
Click to expand...
Click to collapse
Someone can correct me if I'm wrong, but I believe that it is due to the limitations of the LED on the M8 vs the N4. It's a different type of LED so there isn't an ability to tinker with it as much.
I miss that from my N4 too, but ultimately as soon as I saw/see a notification light I check the phone anyway.

Ruxin said:
Someone can correct me if I'm wrong, but I believe that it is due to the limitations of the LED on the M8 vs the N4. It's a different type of LED so there isn't an ability to tinker with it as much.
I miss that from my N4 too, but ultimately as soon as I saw/see a notification light I check the phone anyway.
Click to expand...
Click to collapse
I suspected this but before I got the M8 I didn't even realize that it would have anything else than the best LED. But yeah, 90% of the times It's just a message of some kind so I guess I'll survive. Still annoying though...

djr83 said:
I just switched from a Nexus 4 to a HTC One M8 GPe. On the Nexus 4 I used Light flow very much with many colors and blink patterns to be able to identify what was happening without turning on the screen. Now when I have installed Light flow on my M8 it's only possible to choose from 4 colors or something and no blink patterns.
Is this possible to fix?
Great phone but this really bothers me...
Click to expand...
Click to collapse
Not only is it not possible to fix because of the limitation of the LED that the other poster mentioned, but I'd be shocked if Light Flow gives you any color other than green and if it works consistently.
I had messed around with it some a couple of weeks ago, and gave up. I guess it's possible the Light Flow developer has tweaked it since then, but the version I was using was pretty useless on the M8. I don't fault the Light Flow developer though. I blame HTC on this one.

Andyw2100 said:
Not only is it not possible to fix because of the limitation of the LED that the other poster mentioned, but I'd be shocked if Light Flow gives you any color other than green and if it works consistently.
I had messed around with it some a couple of weeks ago, and gave up. I guess it's possible the Light Flow developer has tweaked it since then, but the version I was using was pretty useless on the M8. I don't fault the Light Flow developer though. I blame HTC on this one.
Click to expand...
Click to collapse
I was able to get green and amber to work. Some colors would just pick green or amber, others just wouldn't do anything.

Andyw2100 said:
Not only is it not possible to fix because of the limitation of the LED that the other poster mentioned, but I'd be shocked if Light Flow gives you any color other than green and if it works consistently.
I had messed around with it some a couple of weeks ago, and gave up. I guess it's possible the Light Flow developer has tweaked it since then, but the version I was using was pretty useless on the M8. I don't fault the Light Flow developer though. I blame HTC on this one.
Click to expand...
Click to collapse
Yeah, it seems to work pretty bad. Are there any other ways to control the LED like Light flow? Does it work better if you just let all the apps control it themselves? I guess not?

I was able to get green and amber to work.

Green, deep orange, magenta and cyan works for me, but green and cyan shows as green/yellow on the LED and deep orange and magenta shows as orange.

Messed around with the LED settings in Textra after I disabled Light flow and suddenly it actually started to blink. Great improvement!
Is it possible to get it to blink in Light flow too?
Edit: Yes, enable color mixing.

djr83 said:
Green, deep orange, magenta and cyan works for me, but green and cyan shows as green/yellow on the LED and deep orange and magenta shows as orange.
Click to expand...
Click to collapse
This is excellent information! Thanks. I'm going to have to reinstall Lightflow and take another whack at it!
---------- Post added at 06:39 PM ---------- Previous post was at 06:38 PM ----------
djr83 said:
Messed around with the LED settings in Textra after I disabled Light flow and suddenly it actually started to blink. Great improvement!
Is it possible to get it to blink in Light flow too?
Edit: Yes, enable color mixing.
Click to expand...
Click to collapse
I use Textra too, so will have to try this as well. Thank you!

Andyw2100 said:
This is excellent information! Thanks. I'm going to have to reinstall Lightflow and take another whack at it!
---------- Post added at 06:39 PM ---------- Previous post was at 06:38 PM ----------
I use Textra too, so will have to try this as well. Thank you!
Click to expand...
Click to collapse
Maybe I was unclear. To get it to flash in light flow you just need to enable mix and choose flash under the right color. This is not specific for Textra, but Textra can flash the Led by itself, without Light flow.

I've really tried getting it to work, but needed to put it in Direct Mode to get the LED with permanent light when lit, instead of flashing.
But in this mode the LED is dimmed even though the settings are set to 100% brightness in lightflow.
To get the LED 100% brightness I needed to remove Direct Mode and accept that permanent light instead didn't work, and live with flashing LED. Hence, not very different control than the standard setup i the Sense rom.
Any clues?

duckstardeluxe said:
I've really tried getting it to work, but needed to put it in Direct Mode to get the LED with permanent light when lit, instead of flashing.
But in this mode the LED is dimmed even though the settings are set to 100% brightness in lightflow.
To get the LED 100% brightness I needed to remove Direct Mode and accept that permanent light instead didn't work, and live with flashing LED. Hence, not very different control than the standard setup i the Sense rom.
Any clues?
Click to expand...
Click to collapse
Try direct mode, root mode and HTC alternative mode. All three at once.

With that Setting the led is always permanent on dimmed like 20% through mixer and also standard control.
Sendt fra min HTC One_M8 med Tapatalk

djr83 said:
Maybe I was unclear. To get it to flash in light flow you just need to enable mix and choose flash under the right color. This is not specific for Textra, but Textra can flash the Led by itself, without Light flow.
Click to expand...
Click to collapse
Yes, I had the LED flashing green from Textra, without Lightflow. But the Textra reminder options are so limited, I'd really prefer to use Lightflow if I can get it working properly.

duckstardeluxe said:
With that Setting the led is always permanent on dimmed like 20% through mixer and also standard control.
Sendt fra min HTC One_M8 med Tapatalk
Click to expand...
Click to collapse
Then I dont know. Works perfect for me. Really bright too. Have you turned off LED notification in screen settings?

I've been fooling around with this a lot since hearing the news that it was working.
I think I've got it working pretty well to my satisfaction now. As I was messing with settings, some of which I may have inadvertently checked (like the Samsung always on setting) I saw a number of interesting behaviors.
One was that at one point my basic notification was, instead of just the green LED flashing, a combination of alternating green and amber colors. (I'm not sure what I did, so don't ask me to reproduce it.)
At some other point I had the LED staying on even with the screen on.
There were other issues, though, when those things were happening. So I kept monkeying with the settings, and I think while neither of those things are happening now, for the most part Lightflow is working acceptably well. I actually would like it if the LED --could-- be on while the screen is on.
Also unless I am mistaken, after an alert, if the screen is turned on but the alert is not cleared, when the screen is turned off, the LED will not come back on. Is this what you two are experiencing as well? I'm pretty sure with my last phone if the alert was not cleared, the LED would continue to flash.
Thanks.

Andyw2100 said:
I've been fooling around with this a lot since hearing the news that it was working.
I think I've got it working pretty well to my satisfaction now. As I was messing with settings, some of which I may have inadvertently checked (like the Samsung always on setting) I saw a number of interesting behaviors.
One was that at one point my basic notification was, instead of just the green LED flashing, a combination of alternating green and amber colors. (I'm not sure what I did, so don't ask me to reproduce it.)
At some other point I had the LED staying on even with the screen on.
There were other issues, though, when those things were happening. So I kept monkeying with the settings, and I think while neither of those things are happening now, for the most part Lightflow is working acceptably well. I actually would like it if the LED --could-- be on while the screen is on.
Also unless I am mistaken, after an alert, if the screen is turned on but the alert is not cleared, when the screen is turned off, the LED will not come back on. Is this what you two are experiencing as well? I'm pretty sure with my last phone if the alert was not cleared, the LED would continue to flash.
Thanks.
Click to expand...
Click to collapse
When the LED is alternating between two colors (or more on other phones) it's probably two (or more) notifications and you've got the settings to loop through them all. Standard setting is to do this when you have the charger plugged in IIRC.
The LED is working with the screen on for me and I think it always has on the M8. On my Nexus 4 it turns off when I turn on the screen and the LED turns on again if I don't clear it and turn off the screen. Great if you don't want to read the message right now and still don't want to miss it later. Since the LED is always working wether or not the screen is on, this is not a problem on the M8.
But if it's possible to alternate with both colors on the same notification, that would be a great way to get a third "color". Could you check if it is like I said or if it really is dual color?
EDIT:
I got it to work! In mixer you can set one color to solid and one to flash to get both. So there are actually a difference on green + amber and amber + green. This will give us a total of 6 options: green, flashing green, orange, flashing orange, orange + flashing green, green + flashing orange.
EDIT2:
The non-flashing color isn't very strong, so I'm not sure how useful this really is.
http://youtu.be/CIRPbcZqV0U

djr83 said:
When the LED is alternating between two colors (or more on other phones) it's probably two (or more) notifications and you've got the settings to loop through them all. Standard setting is to do this when you have the charger plugged in IIRC.
The LED is working with the screen on for me and I think it always has on the M8. On my Nexus 4 it turns off when I turn on the screen and the LED turns on again if I don't clear it and turn off the screen. Great if you don't want to read the message right now and still don't want to miss it later. Since the LED is always working wether or not the screen is on, this is not a problem on the M8.
But if it's possible to alternate with both colors on the same notification, that would be a great way to get a third "color". Could you check if it is like I said or if it really is dual color?
EDIT:
I got it to work! In mixer you can set one color to solid and one to flash to get both. So there are actually a difference on green + amber and amber + green. This will give us a total of 6 options: green, flashing green, orange, flashing orange, orange + flashing green, green + flashing orange.
EDIT2:
The non-flashing color isn't very strong, so I'm not sure how useful this really is.
http://youtu.be/CIRPbcZqV0U
Click to expand...
Click to collapse
It was definitely not really two notifications, though it is somehow possible that Lightflow was acting as if it were. The alternating was definitely like the alternating LED colors that I used to see on my last device when it was alternating between notifications.
I can't reproduce it because I don't know what crazy combination of settings I had at the time. The Samsung always on setting was probably involved. It's even possible I had incorrect checked the Samsung root mode. I was really trying lots of things, and not sure of what I was doing.
Right now, as you suggested, I have Direct Mode, Root Mode, and HTC Alternative driect mode all checked.
I have all LED notifications turned off in Settings/Display and Gestures/Notification Light.
I have Textra set to not notify me in any way, and am using LighFlow for notifications and repeat notifications.
I have not tested things much, so I really don't know how well it is working, but it basically seems to be, though I definitely do not have the LED staying lit with the phone on, or after I turn it on and then back off.
I wonder if some of the differences we are seeing could be due to versions of the phone, rooting procedures, etc. My phone is the Verizon version, and I used Weaksauce to gain root access. Could this make a difference?
Again, many thanks!

It is not possible to fix because of the limitation of the LED.