Hi to all friends.
I just bought an Samsung Galaxy Tab 3 3g sm-311 and I have a request for help.
I just rooted it and it works fine.
In my job they do not use wifi and I am in the need to use internet through my tab 3.
I already own a usb Lan card with asix chipset (AX88772A) that works fine with any pc and mac I ever used. Many people have connect it with OTG cable. It detects it but no drivers re installed in the tablet.
They provide drivers For Android 1.x/2.x/3.x/4.x, Linux kernel 2.6.14 and later that needs to be compiled to kernel.
I do not have the knowledge to do that. Can someone help me out on that and explain how I will put back the kernel ?
I would like to thank everyone in advance .
Best Regards
Anyone ?
Umm.... I think everyone with the 7 inch model of the Tab 3 is having that issue..... Some of us think that it will come through an uupdate or somthing.... Otherwise iv tried to push the persmissions using a xml file which says its detected and thats all....Still dosnt work...:crying:
You can download PPP Widget from the Play Store. Samsung devices lack the Option driver in the stock kernel, so you might need to get that separately. They don't need to be compiled into the kernel. You can have them as loadable modules. The forums on draisberghof.de may provide a link.
The ability to load kernel modules has been removed from the stock Android kernel from Android 4.3 onwards, which sucks, but we can always use a recompiled kernel.
No lack..... do you think that I should contact samsung ?
cmvrgr said:
No lack..... do you think that I should contact samsung ?
Click to expand...
Click to collapse
What have you tried? Did you get the drivers? Samsung will be unable to help except point you at their kernel source, if they do respond.
Please check this thread on the usb_modeswitch forum and request Josh for drivers for the specific kernel for the Tab.
freedune said:
What have you tried? Did you get the drivers? Samsung will be unable to help except point you at their kernel source, if they do respond.
Please check this thread on the usb_modeswitch forum and request Josh for drivers for the specific kernel for the Tab.
Click to expand...
Click to collapse
Its too bad that I can nor find a solution. I will be forced to sale the unit and buy a win8.1 tablet like toshiba encore.
Hi Guys,
I'm trying to get my new usb microscope working on may Tab S 8.4 4.4.2. stock with root.
Cam is DigiMicro 2.0 Scale (dnt.de)
I only get UsbWebカメラ working but just up to 800x600 Resolution. 720p is max available but doens't work. The Scope supports up to 1600x1280 (2MP).
Also, there are two devices shown in list, just the second one works.
This App worked also before rooting the device.
Dashcam never worked .. asked for access to device but shows nothing.
Same on my Note II with Phoenix Rom v18.8 Android 4.4.2
I read about the uvc driver that is necessary to get usb webcam working over USB-TG.
So when UsbWebカメラ works (limited but works), uvc driver should be on my devices and access possible because of root. Am i right?
But why limited and why doesn't Dashcam work?
Hoping you guys can help me with any tips to get the scope proper working, that would be really awesome!
Cheers!
My guess is that kernel needs a recompile with UVC driver enabled.
I have asked in the Skyhigh Kernel thread to incorporate it:
http://forum.xda-developers.com/showpost.php?p=58250924&postcount=477
As the title says, this will be a thread for zf 2 users who installed nethunter and find their external wifi adapters not working for various unknown reasons. I hope that the developers of nethunter for zf 2 see this and atleast help us in finding for solution. (Sorry if my English is bad.)
For me:
Adapter : Tenda w311u+ (rt2870/rt3070)
Kernel : FlareX 1.0 (stock)
guys post about your adapter here, and I will try my best to get them in
Sent from my ASUS_Z00AD using Tapatalk
adapter: no idea (rt73usb)
kernel: FlareM v1.2
firmware: rt73.bin (for the adapter)
With pcap you can use rtl8187 adapters.
But I have rt3070 and don't know how to compile drivers.
D-Link DWA-125 - WIRELESS 150 USB ADAPTER
say99 said:
guys post about your adapter here, and I will try my best to get them in
Sent from my ASUS_Z00AD using Tapatalk
Click to expand...
Click to collapse
I've been searching some probable solution regarding this topic. Though it includes editing of the kernel and adding features to it via cleaning makefile and the defconfig sh!t (which is I don't effin know where it's located to my phone or should I make one?) like here in this link : https://github.com/offensive-security/kali-nethunter/wiki/Modifying-the-Kernel
Is it correct? If it is, it only shows me " *** No rule to make target 'clean'. Stop. "
If not, what are the other ways to install the drivers to our phone so that we can do it ourselves and make it easy for you?
ZeikuOC said:
I've been searching some probable solution regarding this topic. Though it includes editing of the kernel and adding features to it via cleaning makefile and the defconfig sh!t (which is I don't effin know where it's located to my phone or should I make one?) like here in this link : https://github.com/offensive-security/kali-nethunter/wiki/Modifying-the-Kernel
Is it correct? If it is, it only shows me " *** No rule to make target 'clean'. Stop. "
If not, what are the other ways to install the drivers to our phone so that we can do it ourselves and make it easy for you?
Click to expand...
Click to collapse
well, use my kernel directly the command will be ./buildzf2 <v.no> NH
to add something in config kali_zenfone_defconfig
and no worries, I am back to work.
It turns out most wifi drivers are already included (at least in V2.0) but usb otg doesn't work too well on the zenfone.
It doesn't detect my wifi chip when connecting it directly to the otg cable.
However if I plug the wifi chip into a usb hub with its own power source and connect that to the otg cable, it works.
The same wifi chip works well on a galaxy s2.
say99 said:
well, use my kernel directly the command will be ./buildzf2 <v.no> NH
to add something in config kali_zenfone_defconfig
and no worries, I am back to work.
Click to expand...
Click to collapse
Still nothing happens ? I'm just gonna wait for you to fix it and post an update ?
Okay I found a few things out that might be helpful:
The usb otg functionality doesn't work on high speed usb devices.
It doesn't even detect any high speed usb devices.
It does detect detect those device sometimes when the battery is at 100%.
Even then, any kind of data transfer kills the connection.
This is when not using an external power source
When using an external power source (like a usb y cable or a usb hub) , everything works fine.
Hence I think that our phones can't output enough power to keep the usb device running.
I found some files (most importantly dwc3-intel-mrfl.c) under kernelsource/drivers/usb/dwc3/ that control the power draw from usb otg devices.
Maybe some changes there might get usb wifi working again?
I just bought tplink wn722n version 2.. Please help me how can i configure it with nethunter?
Raj.S said:
I just bought tplink wn722n version 2.. Please help me how can i configure it with nethunter?
Click to expand...
Click to collapse
Hi if you find any solution then plz do let me know about it
Hello, i havent found a similiar thread so...
We bought an Opel Adam Rocks (2014) in which there is the really nice Intellilink System. Its said it will connect with all newer Android phones that installed Android Auto, but when i plug it via USB (tried different cables already) it says "Unknown/unsupported device detected".
My phone: Oppo Find 7 is ROOTED, on latest OmniROM which is of course Android 6.XXX + Android Auto App
My question: is it GENERALLY impossible to connect rooted/Custom ROM phones to it? is there anyone that was successful?
Its not a disaster since we didn't see it as important but it surely would be nice!
Thanks.
majo334 said:
Hello, i havent found a similiar thread so...
We bought an Opel Adam Rocks (2014) in which there is the really nice Intellilink System. Its said it will connect with all newer Android phones that installed Android Auto, but when i plug it via USB (tried different cables already) it says "Unknown/unsupported device detected".
My phone: Oppo Find 7 is ROOTED, on latest OmniROM which is of course Android 6.XXX + Android Auto App
My question: is it GENERALLY impossible to connect rooted/Custom ROM phones to it? is there anyone that was successful?
Its not a disaster since we didn't see it as important but it surely would be nice!
Thanks.
Click to expand...
Click to collapse
I have similar problem at the moment with Huawei Mate 9 and intellilink R4.0 (both new). I am waiting for new firmware and will contact Opel dealer for update.
I have read different forums that different firmware on phone acts different as well as software on head unit sometimes makes problems.
Generally I have read that also some custom roms work and some don´t.
Also there have been several updates for the intellilink systems since 2014. This will cost some € at Opel Dealer. It is not for sure this helps! Maybe it is waste of money.
In this case it is google bringing the disaster... The app brings no information what is going wrong...
i'm thinking about an update for the Intellilink, indeed... and... at least its good to hear that custom ROMs CAN work, so there is still chance. thanks for the info!
Sorry for the bad english!
Finally, I have a xt1799-2 (chinese moto g5s) and the zui 3.1 rom not have pt-br language.
if i flashes xt1792 rom(comes with pt-br language), its can work or its brick?
The differences between the two is just the front camera, NFC and 4gb vs 2gb, I do not use the nfc so I do not care
Appreciate
From what I could see of a chino when installing the stock rom of the bike g5s everything works except the NFC and the Frontal camera, could someone inform me if replacing some files of the montana by montana_retcn does not make these sensors work? example fsg.mbn
did you really install xt1792 ROM to xt1799-2 ?
The front camera won't work because the XT1799-2 uses a different sensor than the one used in the other XT179x models.
And fsg.mbn has to do with the baseband. What you would need to do to (try to) get both NFC and front camera working is to copy some system files from the Brazilian firmware to the Chinese one you're using. And probably have a custom kernel built as well.
Edit: oh, and don't flash any bootloader related stuff. It may hard brick your phone.
Kamin4ri said:
The front camera won't work because the XT1799-2 uses a different sensor than the one used in the other XT179x models.
And fsg.mbn has to do with the baseband. What you would need to do to (try to) get both NFC and front camera working is to copy some system files from the Brazilian firmware to the Chinese one you're using. And probably have a custom kernel built as well.
Edit: oh, and don't flash any bootloader related stuff. It may hard brick your phone.
Click to expand...
Click to collapse
maybe he need to copy some files from Chinese to Brazilian version?
there are somebody who seen how original xt1792 firmware works well at xt1799- Green Pomelo?
firware based on xt1792
may i hope that somebody will make firmware based on xt1792 (or other official) which will be compatible with xt1799-2?
it is pretty good phone, bu chinese ZUI is horrible as hell
Kamin4ri said:
The front camera won't work because the XT1799-2 uses a different sensor than the one used in the other XT179x models.
And fsg.mbn has to do with the baseband. What you would need to do to (try to) get both NFC and front camera working is to copy some system files from the Brazilian firmware to the Chinese one you're using. And probably have a custom kernel built as well.
Edit: oh, and don't flash any bootloader related stuff. It may hard brick your phone.
Click to expand...
Click to collapse
I was looking at the boot.img and for me it looks identical when it extracts, the Chinese one has some files init.retcn.rc init.retca.rc, init.reteu.rc, and one of dtv unless the br in ramdisk, now I can not find anything related to the camera drivers or the NFC, could you help me figure out where to find these files?
jahhh1 said:
may i hope that somebody will make firmware based on xt1792 (or other official) which will be compatible with xt1799-2?
it is pretty good phone, bu chinese ZUI is horrible as hell
Click to expand...
Click to collapse
I hope so, after all it will not take much effort after all but some front camera and NFC drivers to work fine (I hope so)
jvfigueredo said:
I hope so, after all it will not take much effort after all but some front camera and NFC drivers to work fine (I hope so)
Click to expand...
Click to collapse
are you sure that xt1792 firmware is workable at xt1799-2? did you try to install it?
jahhh1 said:
are you sure that xt1792 firmware is workable at xt1799-2? did you try to install it?
Click to expand...
Click to collapse
I have not tested yet but a Chinese tested the https://forum.xda-developers.com/mo...cial-firmware-moto-g5s-montana-t3687768/page5
and he said that only the camera and the NFC did not work, I still have not tried because I'm waiting for my phone to arrive, Correios do Brasil sucks
Ahhh as Kaminari said above do not flash the bootloader because there are a lot of people bricking the phone because the bootloader version is smaller than the one you're using (I do not understand it right but you better not risk it)
jvfigueredo said:
I have not tested yet but a Chinese tested the https://forum.xda-developers.com/mo...cial-firmware-moto-g5s-montana-t3687768/page5
and he said that only the camera and the NFC did not work, I still have not tried because I'm waiting for my phone to arrive, Correios do Brasil sucks
Ahhh as Kaminari said above do not flash the bootloader because there are a lot of people bricking the phone because the bootloader version is smaller than the one you're using (I do not understand it right but you better not risk it)
Click to expand...
Click to collapse
i have received my phone few days ago.
it looks like that xt1799 will not get better firmware ...
maybe it have reason to contact with that guy from China to find out possibility of better firmware realese?
jahhh1 said:
i have received my phone few days ago.
it looks like that xt1799 will not get better firmware ...
maybe it have reason to contact with that guy from China to find out possibility of better firmware realese?
Click to expand...
Click to collapse
I tried to talk to him by PM but he has not answered me yet, for now I'm waiting for the phone to arrive and researching how do I correct the problem of the camera driver and nfc with a custom kernel or who knows how to use the kernel itself Chinese rom the two are both android 7.1.1, but I still have to test to see if it works
jvfigueredo said:
I tried to talk to him by PM but he has not answered me yet, for now I'm waiting for the phone to arrive and researching how do I correct the problem of the camera driver and nfc with a custom kernel or who knows how to use the kernel itself Chinese rom the two are both android 7.1.1, but I still have to test to see if it works
Click to expand...
Click to collapse
we haven't any proves that x1792 firmware will work
it is very risk to try
i haven't any expirience in this area
but if you'll solve that problem and make it working - tell me, please
---------- Post added at 04:30 PM ---------- Previous post was at 03:48 PM ----------
I think it is "mission impossible"
becouse why chinese guys installed ZUI and didn't modify global firmware to adapt it for xt1799?
jahhh1 said:
we haven't any proves that x1792 firmware will work
it is very risk to try
i haven't any expirience in this area
but if you'll solve that problem and make it working - tell me, please
---------- Post added at 04:30 PM ---------- Previous post was at 03:48 PM ----------
I think it is "mission impossible"
becouse why chinese guys installed ZUI and didn't modify global firmware to adapt it for xt1799?
Click to expand...
Click to collapse
In china every motorola phone comes with the ZUI, I think it's because la can not use google and etc. Unfortunately when I bought I did not know this detail, I only found out later, but I already saw a process similar to the bike z2 play
https://forum.xda-developers.com/z2-play/how-to/fastboot-rom-oreo-retail-via-fastboot-t3786153
where everything was working, it gave me hope that I could do the same
jvfigueredo said:
In china every motorola phone comes with the ZUI, I think it's because la can not use google and etc. Unfortunately when I bought I did not know this detail, I only found out later, but I already saw a process similar to the bike z2 play
https://forum.xda-developers.com/z2-play/how-to/fastboot-rom-oreo-retail-via-fastboot-t3786153
where everything was working, it gave me hope that I could do the same
Click to expand...
Click to collapse
good luck and please, write a gide when you get succesfull result
@jvfigueredo check your PMs. I'll explain things better, and in Portuguese of course.
Kamin4ri said:
@jvfigueredo check your PMs. I'll explain things better, and in Portuguese of course.
Click to expand...
Click to collapse
please write here
My phone arrived today, unlock his flash and then flash the moto g5s rom without the bootloader, boot, modem, fsg, dsp, and without the imei erase, the phone turned on and such but the wifi did not work(don't enable) , nor the camera, I tried to install the twrp of montana in it, the version of squid did not work, the other was upside down and asking for a password to unlock but could not do anything because it was upside down and I gave up trying to see if you could get the camera to work , does anybody know how to solve these small twrp problems and give me tips on where to get the wifi settings?
wifi does not have mac when I install the g5s version, how do I fix this?
first I have to solve the twrp to be able to flash the future files to correct the bugs (or not?)
Resolved
https://forum.xda-developers.com/moto-g5s/how-to/guide-moto-g5sxt179x-stock-rom-t3839003
Moderator close it
Moto g5s xt1799-2 "HardBrick"
jvfigueredo said:
Sorry for the bad english!
Finally, I have a xt1799-2 (chinese moto g5s) and the zui 3.1 rom not have pt-br language.
if i flashes xt1792 rom(comes with pt-br language), its can work or its brick?
The differences between the two is just the front camera, NFC and 4gb vs 2gb, I do not use the nfc so I do not care
Appreciate
Click to expand...
Click to collapse
friend, I have an equal, XT1799-2 came with the rom of the zui, when updating he did not call him "Hardbrick", you could help me return him even if it is for rom da zui.