Related
Hello everyone!
I just don't get it. Can anyone explain to me what's the difference between flashing a bumped rom and flashing the same rom un-bumped? I just don't get the whole point of it! Sorry, but coming from a Nexus device (why have I ever changed!!!) I'm new to these things.
So, other questions would be: what's the point of bumping? What if I don't do it and just go about the usual way: Unlocking the bootloader, rooting and installing a custom recovery and then proceed to flash the appropriate and preferred rom, kernel, etc?
Hope somebody will bear with me and try to explain these things to a newcomer
Thanks
astrovale said:
Hello everyone!
I just don't get it. Can anyone explain to me what's the difference between flashing a bumped rom and flashing the same rom un-bumped? I just don't get the whole point of it! Sorry, but coming from a Nexus device (why have I ever changed!!!) I'm new to these things.
So, other questions would be: what's the point of bumping? What if I don't do it and just go about the usual way: Unlocking the bootloader, rooting and installing a custom recovery and then proceed to flash the appropriate and preferred rom, kernel, etc?
Hope somebody will bear with me and try to explain these things to a newcomer
Thanks
Click to expand...
Click to collapse
Because
1) Bumping is used to trick the bootloader into thinking that the boot.img is authentic and from Official LG Sources
2) Without bumping you could have to constantly run fastboot boot boot.img (an example of this was CM11 when it first started development)
3) Bootloader cant be unlocked at this time so we rely on a bootloader exploit in order to run custom recovery
4) Its all about the authenticity. If the LG bootloader does its security checks and anything fails then the system doesnt boot
Thanks for the very easy tuo understand explanation. I should have thought that the problem was unlocking the bootloader! Guess I'll have to with the Flow and bump my new phone. I wish I asked my Carrier for an HTC M8
Sent from my Xperia Tablet Z LTE using XDA Free mobile app
simple answer: bump is the only way to unlock g3 bootloader.
all roms are bumped whether displaying [BUMPED] or not.
rhystagram said:
simple answer: bump is the only way to unlock g3 bootloader.
all roms are bumped whether displaying [BUMPED] or not.
Click to expand...
Click to collapse
Ok, so by simple logic, once I have installed, either via bump, flashify or ADB a recovery, I can pretty much flash any rom that is appropriate for my model no, isn't it?
So there is one more question I have: what is the purpose of unlocking the bootloader and then what could be the problems if I don't? If everything I flash for this device (TWRP, roms, kernels, etc) is, by default, bumped, what's the purpose of installing bump at all?
astrovale said:
Ok, so by simple logic, once I have installed, either via bump, flashify or ADB a recovery, I can pretty much flash any rom that is appropriate for my model no, isn't it?
So there is one more question I have: what is the purpose of unlocking the bootloader and then what could be the problems if I don't? If everything I flash for this device (TWRP, roms, kernels, etc) is, by default, bumped, what's the purpose of installing bump at all?
Click to expand...
Click to collapse
You're making it so much harder for yourself dude.. There really is only one way to install custom ROMs and that is by Bumping your phone. That's it.
You go here and read the entire topic. Don't miss a single thing.
Then go here and flash the zip for the latest TWRP.
After that you can install any ROM in the OG and Android Development section.
That's all there is to it. You can read in those topics for more information about what they do.
if you dont bump, then you wont have twrp lol.
you cant flash any roms anyway, you'll potentially brick/soft brick your phone.
roms etc are bumped because they have a patch script implanted to run on the phones correctly.
rhystagram said:
if you dont bump, then you wont have twrp lol.
you cant flash any roms anyway, you'll potentially brick/soft brick your phone.
roms etc are bumped because they have a patch script implanted to run on the phones correctly.
Click to expand...
Click to collapse
OK. Got it! It took a while, but I give up!
Thanks for the help. Coming from the most easy to play with phones (only Nexus so far, but I hate the N6), it isn't easy to have to deal with more stuff than usually needed and hence more complications than usually had.
I thought that, after rooting I could flash TWRP via flashify or rom toolbox and then I would have TWRP without BUMP, but it must be that I'm missing something, if you say I MUST bump my phone to install TWRP.
Thanks and see you around
How to bump lg g3
DevilFan14 said:
How to bump lg g3
Click to expand...
Click to collapse
What exactly do you mean "How to bump"??? Bump and loki are bootloader exploits that allowed us to boot TWRP and all the benefits TWRP offers... On the user side of things you don't "Bump" anything- the Roms, Kernels, and recoveries are "pre-bumped" by the developers and 99.9% of the time they will say whether or not it is "bumped" or "lokied" although loki is really outdated and I doubt you'll encounter it. So in a nutshell we(the user) doesn't "Bump" anything and just make sure to really read before flashing
Sent from my DROID RAZR HD using XDA Labs
It seems that few ever talk about the ZE500CL variant of the zenfone 2. I've read a whole lot of posts on rooting, unlocking the bootloader, and installing TWRP, but most do not even mention this variant.
I started this thread to collect some information about this device. I would like to know from those who have this device, what has worked for you so far, and what hasn't? I'm especially interested in finding out the 3 things mentioned above.
I've only recently bought the device, and I only rooted it (though I did first get one bootloop already). The method that worked for me is described in this thread: http://forum.xda-developers.com/zenfone2/general/root-ze500cl-z00d-t3116531
The OP of the thread linked above also said that the second method on this thread: http://forum.xda-developers.com/zenfone2/general/root-newbie-root-instructions-zenfone-2-t3114063 works as well.
Btw, make sure the drivers are installed, else the computer won't be able to recognize the device when it is in bootloader mode.
Installing Xposed works as well using the ADB method mentioned in the thread linked below:
http://forum.xda-developers.com/zenfone2/general/guide-to-install-xposed-installer-t3116476
I can add any info you find to the device index in the general section for the 500CL.
Djalaal said:
I've only recently bought the device, and I only rooted it (though I did first get one bootloop already). The method that worked for me is described in this thread: http://forum.xda-developers.com/zenfone2/general/root-ze500cl-z00d-t3116531
The OP of the thread linked above also said that the second method on this thread: http://forum.xda-developers.com/zenfone2/general/root-newbie-root-instructions-zenfone-2-t3114063 works as well.
Btw, make sure the drivers are installed, else the computer won't be able to recognize the device when it is in bootloader mode.
Click to expand...
Click to collapse
How did you fix/handle the bootloop?
Do you know if it is possible to update the phone after rooting it?
cmendonc2 said:
I can add any info you find to the device index in the general section for the 500CL.
Click to expand...
Click to collapse
Sure, that post is much more likely to be noticed than this one. Although I might not find out much. I'm a lot less daring without custom recovery. Hence this thread.
crisbal said:
How did you fix/handle the bootloop?
Do you know if it is possible to update the phone after rooting it?
Click to expand...
Click to collapse
Well, seeing that I do not have a custom recovery (bootloader is still locked), I had to do it the hard way, reflash stock rom. Good news is, apparently your userdata (installed apps+settings and internal memory) is not wiped in the process.
First, you gotta download the rom. Get it from http://forum.xda-developers.com/zenfone2/general/index-asus-zenfone-2-wip-t3149748. Although I got mine here: http://www.asus-zenfone.com/2015/03/asus-zenfone-2-stock-rom-ze500cl-ze550ml-ze551ml.html, which is the old version.
Second, go into recovery mode (from bootloader mode), and use adb sideload ("apply update from ADB") to flash the .zip downloaded before. This is described under "Flashing Zenfone 2 via ADB" on this thread: http://forum.xda-developers.com/zenfone2/general/asus-zenfone-2-flashing-recovery-mode-t3096596
Btw, the bootloop was caused by a mistake I made, not the rooting process.
any news update in our bootloader? hope someone could work for that..
How to get rid off couldn't add widget?
crisbal said:
Do you know if it is possible to update the phone after rooting it?
Click to expand...
Click to collapse
After more than a week of feeling unsure to update mine to WW_12.16.5.118, updating it today after finish uninstalling SuperSU. This is what I have done.
1 - uninstall SuperSU from SuperSU setting - reboot.
2 - update firmware.
3 - re-root using Temporary_CWM method as describe here
Chinaphonearena said:
Method 2: Root through temporary CWM
This is a temporary CWM with the primary purpose of injecting SuperSU onto your Asus Zenfone 2. It doesn't permanently replace recovery. This process looks long, but really is bam 1,2,3 done. Just laid out step by step for the newbie.
link removed due to post count limitation
Unzip the package
Copy SuperSU.zip to the base of your SD card
Enable USB debugging (Settings > Phone info > Tap build 7x > Back button > Developer options > USB debugging)
If you don't already have ADB drivers installed, you may need to [post count restriction] and install them (most PCs have them already, but trying installing these if you're having trouble getting your PC to issue commands to the phone via USB)
With your phone on, attach it to PC via USB
Run 'cai_dat_CWM.bat' from the CWM package
In the black command window that opens, type ACCEPT
Type T4
Phone will reboot into fastboot and you'll see commands being issued from the PC cmd window copying the temporary recovery
You may see some funked up images on your display for a bit. Remove the USB cable and within 30 seconds should then see it booted into CWM
Select install update
Navigate to SuperSU.zip and install
Bam, done.
Click to expand...
Click to collapse
4 - Success!!! now my phone are rooted and all rooted apps installed previously are working.
Note: Previously (before updating FOTA) I also root my ZE500CL using Temporary_CWM since One Click root method aren't working for me.
Recover from bootfreeze while fully stock
Well, after getting a bootfreeze being on a fully (old version) stock ze500cl (Z00D), I figured out something useful. How to recover from a bootfreeze with locked bootloader, non rooted stock rom, without loosing what was saved on your internal storage.
Given that you have not messed with system files (since you aren't rooted), I'm assuming you got either corrupted userdata files or your internal storage is so full, the phone fails to even boot. I had the latter. If system files are the problem, this method might (or probably?) not work. The trick is to use tethered TWRP for backing up your internal storage.
1: Download CWM_Zenfone_2_Intel.zip here: https://www.mediafire.com/folder/w70w7r1a65840/Zenfone_2 (gotten from source 1)
2: Download Recovery.zip here: https://drive.google.com/folderview...T0xRMVRkcTg3MHdlc1o0cVFBc3RPeTQ&usp=drive_web (gotten from source 2)
3: Extract the zip from Step 1.
4: Go to the FB_RecoveryLauncher folder you have extracted, and replace the recovery.zip there with the one downloaded in Step 2.
5: Boot into your stock recovery and connect your phone to the computer. Make sure you have adb and the phone's drivers installed (gotten from source 3).
6. Run the cai_dat_CWM.bat script and you should boot into temporary TWRP recovery after a minute or so.
7. Use TWRP to copy your sdcard folder (internal storage) into your ext_sdcard folder (external storage/microsd) for the sake of backing it up.
8a. In the case of having too full internal storage, simply delete some things in there, and you should be able to boot it again.
8b. Not tested, but in case of corrupted userdata, a factory reset is probably necessary, and will solve the bootfreeze issue.
source 1: http://forum.xda-developers.com/zenfone2/general/root-newbie-root-instructions-zenfone-2-t3114063 (method 2)
source 2: http://forum.xda-developers.com/zenfone2/development/alpha-tethered-twrp-asus-zenfone-2-t3123532
source 3: http://forum.xda-developers.com/zenfone2/general/asus-zenfone-2-flashing-recovery-mode-t3096596
@cmendonc2 , if you want, you can add this to your index.
Djalaal said:
It seems that few ever talk about the ZE500CL variant of the zenfone 2. I've read a whole lot of posts on rooting, unlocking the bootloader, and installing TWRP, but most do not even mention this variant.
I started this thread to collect some information about this device. I would like to know from those who have this device, what has worked for you so far, and what hasn't? I'm especially interested in finding out the 3 things mentioned above.
Click to expand...
Click to collapse
Thank you so much for providing this thread. Found it after hours of scouring the internet in search of help after somehow getting my phone locked in boot-loop. There isn't much support for the ZE500CL, but I will be posting on some blogs while I begin work on mine, and I will reference others to this thread and the few others I've found. Thanks again! :good:
Xanathide said:
Thank you so much for providing this thread. Found it after hours of scouring the internet in search of help after somehow getting my phone locked in boot-loop. There isn't much support for the ZE500CL, but I will be posting on some blogs while I begin work on mine, and I will reference others to this thread and the few others I've found. Thanks again! :good:
Click to expand...
Click to collapse
Sorry, was out of town for 3 months. Glad to be of help. You know where the thanks button is .
I should note that the this phone is now the daily driver of both my parents so I stopped tinkering with it, although I left one of them rooted (and the other not lol). So don't expect more updates from me sadly.
Djalaal said:
Sorry, was out of town for 3 months. Glad to be of help. You know where the thanks button is .
I should note that the this phone is now the daily driver of both my parents so I stopped tinkering with it, although I left one of them rooted (and the other not lol). So don't expect more updates from me sadly.
Click to expand...
Click to collapse
That's quite alright, I've had my fun with Z00D, got myself a LG V10 to break now
I dont ask for directions...
This is my first time asking questions as I have always been able to reverse-engineer (R-E) or as the hacker in swordfish would say "the code just comes to me". Ive been around computers since my dad took me to work at UT and commands were issued with punch out cards....I've been a long time android self taught enthusiast turned professional. ITT Alum etc. I research, I surf, I R-E, and I try every possible option etc...only this has me stumped. And this is the first android that has stumped me. I double checked everything but I keep getting this error in BBQLinux: I followed all pre-update instructions to the T.
fw: ATT_12.16.10.92
adb sideload
This package is not for ATT (WW)
E: Error in /sideload/package.zip
(Status 7)
yes I did with root cmd line, yes cd to zip file location, yes I verified correct fw, even tried different fw zips ZE500CL downloaded officially and from here.
I greatly appreciate any help and I do apologize for "asking for directions"
Computer John dba Austin Computer Techs
cuervo233 said:
This is my first time asking questions as I have always been able to reverse-engineer (R-E) or as the hacker in swordfish would say "the code just comes to me". Ive been around computers since my dad took me to work at UT and commands were issued with punch out cards....I've been a long time android self taught enthusiast turned professional. ITT Alum etc. I research, I surf, I R-E, and I try every possible option etc...only this has me stumped. And this is the first android that has stumped me. I double checked everything but I keep getting this error in BBQLinux: I followed all pre-update instructions to the T.
fw: ATT_12.16.10.92
adb sideload
This package is not for ATT (WW)
E: Error in /sideload/package.zip
(Status 7)
yes I did with root cmd line, yes cd to zip file location, yes I verified correct fw, even tried different fw zips ZE500CL downloaded officially and from here.
I greatly appreciate any help and I do apologize for "asking for directions"
Computer John dba Austin Computer Techs
Click to expand...
Click to collapse
?? Is that att ota youre trying to sideload? Att doesn't have fw, ze500cl does. But just unlock your bootloader, flash twrp, then install whatever, cm, aicp, custom stock or straight stock. http://forum.xda-developers.com/showthread.php?p=64991762
Sent from my MotoG3 using Tapatalk
Cool, I didn't read anywhere about unlocking BL first otherwise Ida made that "turn at the first light". We will ULO thru Asus and continue on our journey. These little Asus trinkets are little buggers being Intel based. Only line of Android devices that have ever stumped me. I am much obliged, fellow XDA brethren. Much obliged.
After pondering a little I came to this conclusion:
UL BL is basically the first step one should take when doing any kind of flashing of internal partitions be it a boot.img, recovery.img, FW etc... at least for the higher end devices. I don't recall having to do that for my sm-n900t recently. Does it only apply for flashing back to stock and not custom roms? Although I didn't have to UL BL first when I heim-dall/Odin flashed my note3 back to stock rom after being boot-looped. Cause once I did that I was able to try out a majority of custom roms available for it whether flashed thru HD/fastboot, Odin, via twrp update zip, or adb sideload. Hmmm, I might understand once I think it thru and look at all the different variables.
Good day gentlemen.
Be vewy vewy quiet, I'm hunting androids...
:good:
@cuervo233 Yes most devices you have to unlock the bootloader first. But there are some devices that already come unlocked. And then there are even some that have bootloaders that cannot be unlocked due to carrier restrictions. In order to get custom recovery to boot you must unlock the bootloader or it must come unlocked. With a custom recovery you can Flash the stock zip file from the Asus website or a custom ROM have fun
Sent from my MotoG3 using Tapatalk
Thank you. I was able to ULBL, flash TWRP, flash to ww 118, root, and now its time to explore the neat wonderful world of custom ROMs. This was by far the hardest yet. Next in line is the cricket Stylo which was also giving me hell, but now I dont think I should have any problem getting it done. I'll keep ya'll posted.:good:
Lg stylo should have way more development, have fun brother. Remember tmobile phones( cricket, walmart family mobile, and metro pcs) you can easily unlock the bootloader . att on the other hand usually has locked down bl.
Sent from my MotoG3 using Tapatalk
Hi all,
I have a zenfone 2 that I have just rooted....so now what?
Basically I wanted to optimise my phone so I am able to disable annoying notifications which are greyed out (although since rooting and checking this it still greyed out) I want to remove bloatware and I would actually like to customise my own android system, starting from a 'vanilla' base where I can build it up myself.
I have also read that I need to install a android recovery programme on asap after rooting.
So sorry about this but I really do need 'stupid' instructions as using hi tech words will just baffle me. lol
I have played around with computers in the past and learned about them so this is the phone stage now!
Thanks in advance and for your patience with this newbie!
Kerry
Yankeegal said:
Hi all,
I have a zenfone 2 that I have just rooted....so now what?
Basically I wanted to optimise my phone so I am able to disable annoying notifications which are greyed out (although since rooting and checking this it still greyed out) I want to remove bloatware and I would actually like to customise my own android system, starting from a 'vanilla' base where I can build it up myself.
I have also read that I need to install a android recovery programme on asap after rooting.
So sorry about this but I really do need 'stupid' instructions as using hi tech words will just baffle me. lol
I have played around with computers in the past and learned about them so this is the phone stage now!
Thanks in advance and for your patience with this newbie!
Kerry
Click to expand...
Click to collapse
Hi Kerry,
First thing you should now do after rooting your device would be flashing a custom recovery that is specific to your device (make sure your devices boot loader is unlocked first). This will allow you to make a backup of everything just in case anything were to go wrong, flash custom ROMs and useful zips. You can pick your favorite custom recovery such as Team Win Recovery Projects custom recovery (TWRP), Clock Work Mods custom recovery (CWM) or Philz Touch recovery based off of CWM although personally I would recommended twrp.
There are multiple ways to do this: Using the TWRP/CWM recovery installer from the play store or the more complicated way of flashing it from your computer. If you were to choose to install TWRP from their app on the play store (grant it root permission) you can select your device from the supported device section within the app, pick the latest recovery, hit the install button and let the app work its magic. If all works correctly you can now reboot to recovery and you will see TWRP is installed. Now you should create a backup to be on the safe side and you're good to go!
To best optimize your device I would recommend installing a custom ROM (look up custom ROMs for the Zenfone 2) and install the zip through recovery. (make sure to pick the right ROM for your device and version otherwise you may soft brick your smartphone) Now with a custom ROM you can better optimize your device and fully customize it to your liking. Make sure to look up custom ROM installation instructions for your device for better detail.
As far as removing system apps/bloatware you can use a "root app delete" tool from the play store but be careful what you remove as some applications are required!
Make sure to take your time and be careful when attempting any of these things and be careful what you modify! Just remember that no question is a stupid question as we all have to start somewhere!
Hope I was able to help you even if it was just a little, good look and have fun!
Rooted Droid Thanks you so much!!! First of all thanks for being so patient with me and secondly thanks for the useful (and easy to read) information.
I will go and install a back up on my phone from the ones you have suggested.
Hopefully you will be around over the next few days if I have more questions. Not planning on doing this all at once but rather taking the time and doing it right.
Thanks so much again!! :good::good::good:
Ooops sorry....how do I do this please?? ---> (make sure your devices boot loader is unlocked first)
Yankeegal said:
Rooted Droid Thanks you so much!!! First of all thanks for being so patient with me and secondly thanks for the useful (and easy to read) information.
I will go and install a back up on my phone from the ones you have suggested.
Hopefully you will be around over the next few days if I have more questions. Not planning on doing this all at once but rather taking the time and doing it right.
Thanks so much again!! :good::good::good:
Click to expand...
Click to collapse
Not a problem! I'm always happy to spread some knowledge and appreciate when people do the same to me! I also went ahead and checked the TWRP app and the Zenfone 2 is supported so it looks like your good to go. And yes absolutely, there's no rush so take all the time you may need and everything will go smoothly! I'm always around and will try my best to answer questions.
---------- Post added at 08:02 AM ---------- Previous post was at 07:41 AM ----------
Yankeegal said:
Ooops sorry....how do I do this please?? ---> (make sure your devices boot loader is unlocked first)
Click to expand...
Click to collapse
Check this site out:
http://myzen.asus.com/2015/10/13/official-bootloader-unlock-for-zenfone-2-is-now-available/
All devices have a different method for unlocking bootloader (some don't even have locked bootloaders) but this is an official bootloader unlocking method for the Zenfone 2 from Asus itself. I suggest following its directions and you should be able to unlock it this way.
Ok I followed the link but now I am confused. I have version ww_2.20.40.63_201......
Apparently I need a later version. What started off with just adding an APP means me doing other things before I even get to that point (hence the confusion! lol)
I never updated the phone via OTA as I was told it would invalidate my warranty and also I have killed a phone before using that so can you walk me through please...if you have the time....or could I just check if I have it unlocked already??
I haven't even gotten to the part where I create a backup...tee hee
Yankeegal said:
Ok I followed the link but now I am confused. I have version ww_2.20.40.63_201......
Apparently I need a later version. What started off with just adding an APP means me doing other things before I even get to that point (hence the confusion! lol)
I never updated the phone via OTA as I was told it would invalidate my warranty and also I have killed a phone before using that so can you walk me through please...if you have the time....or could I just check if I have it unlocked already??
I haven't even gotten to the part where I create a backup...tee hee
Click to expand...
Click to collapse
Hi sorry for the late reply, I'm in Canada so it was 2am when I was last talking to you so I went to bed haha. Anyway as far as unlocking the Zenfone 2's bootloader I wouldn't have experience unfortunately as I'm using a Nexus 5. The easiest way to go about this now would be to go to your device specific forum and find a way to unlock it there.
The following way to unlock the bootloader requires you have ADB installed on your PC. This is a guide for installation on Windows :
http://www.android.gs/install-android-sdk-adb-windows/
And here is a thread specific to unlocking the Zenfone 2 using adb:
http://www.xda-developers.com/asus-zenfone-2-bootloader-unlocked-without-asus/
BTW as you mentioned "updating may invalidate your warranty" things like rooting, installing a custom OS, unlocking the bootloader, installing a custom recovery and other things like that all (in most cases) void your warranty.
Sorry I can't personally help with the bootloader as I've not personally unlocked it on a Zenfone. Still feel free to ask any questions if you need to. Good luck!
I have a problem with my HTC one M8 At&t (It's unlocked to any provider) it's also rooted so if you can help me either unroot it or add a ROM that would be so helpful.
Well the problem with my phone is.
1) It won't update to 6.0 its stuck on 5.0.2
2) ROMS won't install at all. Maybe because it doesn't have TWRP (I don't know where to get that)
3) The phone is S-on relocked and it says "This device has been tampered' then a warning
I asked HTC and they didn't help at all. I asked people that I know but they are IOS.
So this is the last resort. I was recommended by a friend to ask you wonderful people. I mean i have some knowledge but it don't have anyone to show me the ropes of how to do it. But please if you guys can help add link with steps.
Thank you and have a good day dudes.
PTP012 said:
I have a problem with my HTC one M8 At&t (It's unlocked to any provider) it's also rooted so if you can help me either unroot it or add a ROM that would be so helpful.
Well the problem with my phone is.
1) It won't update to 6.0 its stuck on 5.0.2
2) ROMS won't install at all. Maybe because it doesn't have TWRP (I don't know where to get that)
3) The phone is S-on relocked and it says "This device has been tampered' then a warning
I asked HTC and they didn't help at all. I asked people that I know but they are IOS.
So this is the last resort. I was recommended by a friend to ask you wonderful people. I mean i have some knowledge but it don't have anyone to show me the ropes of how to do it. But please if you guys can help add link with steps.
Thank you and have a good day dudes.
Click to expand...
Click to collapse
I'd suggest you watch this video to install TWRP: https://www.youtube.com/watch?v=9HWj_1KHbuY
And then I'd also recommend installing CM13 since it's really stable. It can be found here: http://forum.xda-developers.com/htc...m-cyanogenmod-13-0-nightlies-htc-one-t3256696
PTP012 said:
I have a problem with my HTC one M8 At&t (It's unlocked to any provider) it's also rooted so if you can help me either unroot it or add a ROM that would be so helpful.
Well the problem with my phone is.
1) It won't update to 6.0 its stuck on 5.0.2
2) ROMS won't install at all. Maybe because it doesn't have TWRP (I don't know where to get that)
3) The phone is S-on relocked and it says "This device has been tampered' then a warning
I asked HTC and they didn't help at all. I asked people that I know but they are IOS.
So this is the last resort. I was recommended by a friend to ask you wonderful people. I mean i have some knowledge but it don't have anyone to show me the ropes of how to do it. But please if you guys can help add link with steps.
Thank you and have a good day dudes.
Click to expand...
Click to collapse
1. If it is AT&T, it won't update on non-AT&T network.
2. Unlock bootloader and install TWRP
3. The phone was unlocked before and now it is relocked.
Post fastboot getvar all without serial & imei no to confirm which device variant that you have and what to do with it.
Ragarianok said:
I'd suggest you watch this video to install TWRP: https://www.youtube.com/watch?v=9HWj_1KHbuY
Click to expand...
Click to collapse
I would suggest the OP not follow that video. Followed literally, it will not only direct the OP to install a horribly obsolete version of TWRP, but also one that is not intended for his version of the M8. The "wlv" version TWRP in the video is for Verizon, and would install TWRP to the wrong partition, maybe even brick the phone. TWRP has since been updated and unified to identify the M8 version, and install on the proper partition accordingly; but such was not the case at the time the video was created.
This is one of the main reasons I don't recommend rooting by watching YouTube videos. They aren't detailed enough to point out all the nuances and potential pitfalls of the process. They just spoonfeed enough knowledge to you get you into big trouble, without any knowledge or skills to get you out of that hole.
Also, the random "root" website referenced in the video doesn't appear to have any downloadable files any longer, anyway. At least not that I can find, upon examination. So if the OP that route, they would have hit a dead end. I also personally don't recommend such "root" websites, as they almost always just steal content from XDA, without giving proper credit.
All the info the OP needs is right here on XDA. An excellent guide for unlocking the bootloader and installing custom recovery is here. Although the guide is dated (hard for anything for this phone to not be dated at this point - it is over 2 years old) and I have the following additional advice:
- HTC drivers on the guide are dated. But if you plug the phone into your PC, it should auto-install HTC Sync and the required drivers
- You can get TWRP right from the source here. I'm not sure if your existing firmware will play well with the latest version (TWRP 3.0.x), but I'm pretty sure version 2.8.7.0 will work well (and known to be very stable).
- Only need to follow the guide through "ROOTING YOUR DEVICE" Step 8, that is unlocking the bootloader and installing custom recovery (don't flash SuperSU). From there, get the desired custom ROM on the phone, boot into TWRP, backup the current stock ROM, then do default wipe (data, cache, Dalvik) in TWRP and flash the ROM.
---------- Post added at 10:01 AM ---------- Previous post was at 09:48 AM ----------
An alternative would be to flash the Marshmallow RUU to update to full stock image. But in order to do so, the OP will have to update to Marshmallow firmware (which requires some knowledge of using fastboot) and then run the Marshmallow RUU. The RUU in listed on my AT&T M8 Index thread here (along with a lot of other useful info), with the info/link for flashing firmware highlighted in red text.
Hey Guys,
Im new to the Android community coming across from an iPhone. I have landed myself an HTC One M8 but have no idea what to do next! (Ask me how to "Jailbreak" iPhones and I'm your guy) but the whole root process and custom ROMs are confusing me.
Basically I'm in Australia on the Telstra network (that seems to matter with rooting) and have the M8 on Android 6.0
Where is my next step? Im keen to learn but there are 100s of threads on this question and I simply don't know where to start, so for that I apologise.
Thanks in advance,
The "ConfusedOl1ve"
UnrealOl1ve
Since you're new to the forum, I'll give some (hopefully) friendly advice on posting: There is a thread sticky at the top of this section, and it says clearly "Please Read before posting" and describes what belong in this section, and questions/help requests is not one of them.
http://forum.xda-developers.com/htc-dream-g1/general/guide-to-htc-device-forums-please-read-t3234095
No need to try to change or move this thread (you can't). So I'll request to the mods to have it moved.
Now on to the real stuff. The exact process depends on what you want to do precisely, root or flash a custom ROM. Since on this device, you do not actually need to root before flashing a ROM. But some folks may want to stay on the stock ROM, but with root.
And the process for one versus the other will have some differences.
UnrealOl1ve said:
Hey Guys,
Im new to the Android community coming across from an iPhone. I have landed myself an HTC One M8 but have no idea what to do next! (Ask me how to "Jailbreak" iPhones and I'm your guy) but the whole root process and custom ROMs are confusing me.
Basically I'm in Australia on the Telstra network (that seems to matter with rooting) and have the M8 on Android 6.0
Where is my next step? Im keen to learn but there are 100s of threads on this question and I simply don't know where to start, so for that I apologise.
Thanks in advance,
The "ConfusedOl1ve"
UnrealOl1ve
Click to expand...
Click to collapse
Read these thread carefully andFollow steps to unlock your bootloader and install twrp http://forum.xda-developers.com/showthread.php?t=2699065
sayad1 said:
Read these thread carefully andFollow steps to unlock your bootloader and install twrp http://forum.xda-developers.com/showthread.php?t=2699065
Click to expand...
Click to collapse
Toolkit hasn't been updated in over a year and a half. It contains an extremely obsolete version of TWRP, which will cause issues with the OP's Marshmallow device.
Further, IMO the toolkit seeks to provide a solution for a problem which doesn't exist. The steps to unlock the bootloader, and flash custom recovery are easy to do "manually" without the toolkit. And learning to do so (for those that don't already know these skills) should be mandatory for anyone wishing to mods this phone.
Most of what the OP would need to know, is contained in Vomer's excellent guide here. Although the guide hasn't been kept up to date, so I'll provide the following caveats:
1) Follow Sections 0 and 1, to unlock the bootloader.
2) Use current version TWRP 3.0.2 from here, instead of the old version listed(and linked) in the guide. Somewhat obviously, the fastboot command used to flash TWRP will need to be changed to contain the proper file name (newer version number). Alternately, just rename the file something like twrp.img, and use that in the fastboot command.
3) Do not follow Sections 2 (S-off, SuperCID) or 3. They aren't needed for root or flashing ROMs, and the info is no longer accurate.
After that, the way to proceed depends on the 2 different paths I stated in my last post: stock ROM with root; or flash custom ROM.
Stock ROM with root: Make a TWRP backup of the stock (unrooted) ROM, then flash SuperSU. Vomer's guide automatically links to the latest stable version. But it should be noted, that the latest is SuperSU 2.78. Many folks make the mistake of using old versions SuperSU (<2.52 or thereabouts) which won't work on Marshmallow, and will result in being stuck in a bootloop.
Flash custom ROM: No need to root before flashing a custom ROM. What you do in this case:
a) Make a TWRP backup of your stock ROM
b) Backup anything you want to keep, by your method of choice (copy to computer, Titanium Backup, cloud, etc.)
c) Put the ROM on the phone
d) Boot into TWRP, select Wipe, and do the default wipe (Dalvik, Cache, and Data)
e) Select Install in TWRP, and choose the ROM to flash it.
f) Reboot and drink beer, you're done