hello
i got s8 plus t-mobile unfortunately it was not connecting to network actually it was my network problem but i tried to flash it with some unmatched firmware. now it stuck on no command, software recovery mod is gone, i tried many other relevant ROMs through odin 3 like sm-g955u sm-g955u1 sm-g955f but the problem is still (sw rev check fail[abl] fused 5 binary3)
please guide me to straight way
thank you so much
Related
try to dowgrade from nougat to marshmallow, according method in detail, and at the end of the flash in the recovery "dm-verity verification failed to check drk first" any solution?
SOLUTION:
SOLUTION: ROOT AGAIN
So im not entirely sure what solution root again is all about. But my story starts here. I work in IT for a company that issues phones out to all employees, and we have 100s, I was recently contracted by IT to do some FRP Bypass, and have been successful until I tried to walk someone doing this to an S7 Active, and they failed repeatedly just in trying to restore the phone with ODIN. They mailed me the phone, and now I have the dm-verity error DRK not installed. I have tried everything I can think of (do not have access to any box or key) so I tried rooting the phone. I have tried both the 6.0.1 and 7.0 roots. Most recently the 7.0, i can flash the eng kernel but it does not boot. Occasionally I can get to the setup screen, but mostly it just sits on the ATT globe or restores to a black screen. I can't actually set the phone up. It is currently FRP locked but I'm not worred about that for now. Any help is appreciated, I would settle for a complete restore to stock, but all FW I have tried (BL2) fails to boot do to DRK.
what firmware was it on ? which have you tried ?..
are you using the princecomsy modified Odin ?
have you tried the qd4 from my thread ?
miniminus said:
what firmware was it on ? which have you tried ?..
are you using the princecomsy modified Odin ?
have you tried the qd4 from my thread ?
Click to expand...
Click to collapse
I have tried every fw I can find on bl2 including the qd4 from your thread. I have tried both official and prince Odin. All to the same results. Right now I believe the device is on pi2 with the 6.0.1 eng AP. That is the only way I can boot the os. The 7.0 eng AP bootloops.
I have successfully rooted my 930a multiple times and many other devices so I am experienced. Not that it matters but I was also able to turn the FRP lock off using the eng AP.
Edit... Obviously I am using 6.0.1 eng with matching fw and tried the 7.0eng with qd4. I can Odin any fw that is on BL2 successfully but without the eng AP nothing will fully boot. And doing 100% stock Odin reflashes does not fix drk
Any final thoughts?
Edit... I shipped the phone back to my company, (it wasn't a personal device). And told them it needed to stay on 6.0 eng to function. And advised they dia it.
I have some proplem with Samsung Galaxy S6 SM-G920VZMA , after flash rom DQD1 has loop boot error "dm-verity error …… failed code : 0x002" Please help.
Hi guys,
I'm stuck with my note 7, n930v in download mode because I can't flash any firmware.Everytime when I am trying to flash this one N930VVRS1APH1 or N930VVRS2APHE I'm getting the same error in download: SW. Rev. CHECK FAIL: fuse 3 binary x, where x=1 for PH1 and x=2 for PHE.
What can I/we do when we are facing this problem? I am searching for a rev.3 firmware since 6 days, I will probably incinerate this phone finally if there is no solution to download that firmware.What exactly is this stupid sw.revision and why can't be bypassed....:| ?
However, is there anyone here who have any idea with that? Thank you !!
Cheers
I encountered the same problem. Any one can help us? Please!
Up??
You've updated your bootloader to revision 3. This is the same across all current samsung devices. You won't be able to downgrade to a revision 1 or 2 firmware now. Not unless you unlock the bootloader somehow.
I saw this thread in the forums: https://forum.xda-developers.com/ve...nbrick-verizon-note-7-matter-how-bad-t3467085
He used the Verizon Repair Assistant tool to make the device download the latest firmware from Verizon Servers. Maybe that will work if you can't find a Binary 3 Firmware. I mean I did a search on google for N930VVVRS3 firmware and got zero results.
I also found this Binary 3 Firmware File here in the forums:
AP_N930VVRS3APL2_CL8720001_QB11952598_REV00_user_l ow_ship_MULTI_CERT_meta.tar
I found this thread from GSM-Firmware showing an official VZW Binary 3 Firmware link: http://forum.gsm-firmware.com/showt...B11952598_REV00_u-ser_low_ship_MULTI_CERT-tar
Flashing that will downgrade your aboot version. Once that is fully installed and has booted up once, try flashing just the AP file from a binary 2 or binary 1 firmware, doing a factory reset from recovery immediately after flash before letting it fully boot. It worked on my AT&T Note 5 to get Rooted 5.1.1 running again after I had updated my bootloader too far. Although that might be a shot in the dark using Official VZW firmware.
You will want to get the 3APL1 Combination file or another Binary 3 Combo for N930V. And then try to flash a binary 1 or 2 AP file only. Don't flash a binary 1/2 BL or CP file. If you get the AP file to flash, then you can flash the CSC file.
battery dead fix last firmware
https://drive.google.com/file/d/1_PtuCij2SRPeGcCGiZ9vWSPF-n6IJZNw/view
Samsung Galaxy S8+
Version Info
Model SM-G955U [SS]
PDA FA70_G955UQU4ARE1
PHONE G955USQU4CRE1
P_S/N UNKNOWN
H/W REV1.0
CAL.ID 2017.04.18
UN (NOT SURE IF TO GIVE THIS NUMBER)
MEMORY 64GB
Ran ODIN v3.12.7 and rom that came with it. now stuck in Factory Binary, trying to flash back to factory, any help? Ive tried several roms and either get fails. or sometimes gets abl.elf
in upload mode
[ UPLOAD MODE ]
User press powerkey 7 sec (it does nothing)
--------------------
DDR Vendor :Samsung
SOC_HW_REVISION : 2.1
last_ns :0xff
Generaring Summary
>>General Info
>>DDR Info
>>DCVS Info
>>RPM
>>Trust2one
>>Hypervisor
>>APSS
>>MOdem
Done!
in Downloading custom rom
CARRIER: vzw
RPMB fuse blown
RPMB PROVISIONED
CURRENT BINARY: Samsung Official
SYSTEM STATUS : oFFICIAL
FRP LOCK: OFF
QUALCOMM SECUREBOOT: ENABLE
RP SWREV: B4(2,1,1,1,1) K3 S4
SECURE DOWNLOAD: ENABLE
DID : 205E53BE31CB
AFTER RUNNING ODIN AND FAILING THERES ANEW RED LINE
SW REV CHECK FAIL : [ABL]FUSED 4 > BINARY 1
I am not an expert, but it sounds like you are trying to flash a bootloader that is an older version than the version 4 on your phone. I don't think you can downgrade the BL version. The fifth character from the end is the BL version. (e.g. G955USQU4CRE1) Also, you may need a newer version of ODIN.
Smithfolk4 said:
I am not an expert, but it sounds like you are trying to flash a bootloader that is an older version than the version 4 on your phone. I don't think you can downgrade the BL version. The fifth character from the end is the BL version. (e.g. G955USQU4CRE1) Also, you may need a newer version of ODIN.
Click to expand...
Click to collapse
so could i just google a "verison 4 BL for s8+" or something along those lines?
Kyles89 said:
so could i just google a "verison 4 BL for s8+" or something along those lines?
Click to expand...
Click to collapse
Yes. There are a lot of software versions available. If you use Updato you can search by model number and service provider (listed as region on Updato. I was able to find one with a version 4 bootloader. Similar to your version, but CRE9 at the end. It is an oreo version. Your phone is a model SM-G-955U when you search there. It might take a long time to download. I have sometimes had luck speeding things up by trying to restart the download. Sometimes it just takes a long time. Be careful when you are flashing if you have any desire to go back to a previous version. I am not sure of the limitations.
Another thing you could try that might be easier for you is to go to the JRKruse ROM thread here - https://forum.xda-developers.com/verizon-galaxy-s8+/development/rom-t3771206 and use the instructions he has there to install the ROM. There is another rooted ROM that he has that may also work for you. He has instructions on what to do.
Hello, my galaxy s8 is stuck in rpmb provisioned and its boot looping, I can get to download mode, it doesn't say things such as fuse blown etc. How can I get out of the boot loop? Help is appreciated.
Did you find a fix? Im having a very similar problem. I don't see any stock roms with a v4 bootloader. The most recent seems to be a v3.
Fixed it the way Smithfolk said. I was using the combination rom FA70_G955USQU4ARE1 with a V4 bootloader. I used odin v3.13.1 and flashed verizion G955USQU4CRE9 from Sammobile including the bootloader and it fixed my phone.
Long story short I rooted my phone with Magisk, fully unrooted then me being stupid I went into settings and turned off OEM Unlock it had to wipe the device since then had this FRP lock, Now i was told only way to fix this is to flash with the default software since this i've run into problems with ODIN when loading the files into the phone it gets stuck on recover.img on Odin and on the phone it says sw rev check fail bootloader device 2 binary 2.
If you guys can help fix I would be so happy
Thank you
gilescore said:
Long story short I rooted my phone with Magisk, fully unrooted then me being stupid I went into settings and turned off OEM Unlock it had to wipe the device since then had this FRP lock, Now i was told only way to fix this is to flash with the default software since this i've run into problems with ODIN when loading the files into the phone it gets stuck on recover.img on Odin and on the phone it says sw rev check fail bootloader device 2 binary 2.
If you guys can help fix I would be so happy
Thank you
Click to expand...
Click to collapse
Make sure you're not trying to downgrade the bootloader, has to be the same version or higher that you're flashing
Download mode look for BL:1 or 2 or 3, and pick a firmware with that number or higher as shown below
G960FXXU2BRJ3 << Version 2
Thanks man thats fixed it
*Detection* said:
Make sure you're not trying to downgrade the bootloader, has to be the same version or higher that you're flashing
Download mode look for BL:1 or 2 or 3, and pick a firmware with that number or higher as shown below
G960FXXU2BRJ3 << Version 2
Click to expand...
Click to collapse
Thank you so much
gilescore said:
Thank you so much
Click to expand...
Click to collapse
No probs :good:
Hi Guys,
About a month ago I got new Galaxy S9 with firmware G960FXXSBETH2,
As it turned out it has all kind of reception issues, so I tried to find alternate ROM for it to see if this issue can be improved.
While searching for ROM at Sammobile.com I noticed that the latest version for my region is different than the one I have on my device, and in fact I should have firmware G960FXXUAETG3.
I got ODIN (3.14.4) but when tried to flash the alternate firmware got this message:
"sw rev check fail bootloader device 11 binary 10"
So as it seems this device came with high boot-loader version 11 and I understand that I can not downgrade it either way - correct me if I'm wrong on this.
So what are my options on this?
Is there an alternate ROM that I could use? Maybe a customized one?
Or am I'm stuck with this firmware,
Many thanks