Hi, i tried updating my android phone with the latest security patch from TMobile. I was on Android 8.0 and when i went to update it, the phone restarted and now i get the message.
"Security Error: This phone has been flashed with unauthorized software * is locked. Call your mobile operator for additional support. Please note that repair/return for this issue may have additional cost."
The problem is i have never flashed this phone whatsoever. i did obtain it via a warranty exchange and udpated it from android 7.0 to android 8.0 and it worked fine. I am not sure why this happened.
Anyway, i tried downloading the ODIN firmware file for 8.0 from the updateto website
Specifically: htt ps:/ /updato.com /firmware-archive-s elect-model?rec ord=EEDFC92B2E0611E89F15FA163EE8F90B (get rid of spaces)
But it only contains the March 20th, 2018 firmware file (which i believe is the original 8.0)
because i had updated past that i need a more recent odin flashable firmware.
When i try to flash the CRB9 firmware i usually get error (abl) Fused 3 > binary 2 or (bootrom) fused 2 > binary 1
I believe my problem is i am attempting to downgrade the OS version. So i need a more updated ODIN firmware file.
i looked at this url
htt p://fota-clou d-dn.ospserver. net/firmware/T MB/SM-G955U/versio n.test.x ml (get rid of spaces)
and found that the latest firmware is G955UOYN3CRD9/G955USQU3CRD9
Does anyone know where i can get this odin firmware file so i can reflash my phone and get it working again?
Which firmware you are on?
There's U3CRD4 update available to download.
i was on android oreo. Thankfully T-mobile said it was under warranty and replaced my phone!
Samsung Galaxy S8+
Version Info
Model SM-G955U [SS]
PDA FA70_G955UQU4ARE1
PHONE G955USQU4CRE1
P_S/N UNKNOWN
H/W REV1.0
CAL.ID 2017.04.18
UN (NOT SURE IF TO GIVE THIS NUMBER)
MEMORY 64GB
Ran ODIN v3.12.7 and rom that came with it. now stuck in Factory Binary, trying to flash back to factory, any help? Ive tried several roms and either get fails. or sometimes gets abl.elf
in upload mode
[ UPLOAD MODE ]
User press powerkey 7 sec (it does nothing)
--------------------
DDR Vendor :Samsung
SOC_HW_REVISION : 2.1
last_ns :0xff
Generaring Summary
>>General Info
>>DDR Info
>>DCVS Info
>>RPM
>>Trust2one
>>Hypervisor
>>APSS
>>MOdem
Done!
in Downloading custom rom
CARRIER: vzw
RPMB fuse blown
RPMB PROVISIONED
CURRENT BINARY: Samsung Official
SYSTEM STATUS : oFFICIAL
FRP LOCK: OFF
QUALCOMM SECUREBOOT: ENABLE
RP SWREV: B4(2,1,1,1,1) K3 S4
SECURE DOWNLOAD: ENABLE
DID : 205E53BE31CB
AFTER RUNNING ODIN AND FAILING THERES ANEW RED LINE
SW REV CHECK FAIL : [ABL]FUSED 4 > BINARY 1
I am not an expert, but it sounds like you are trying to flash a bootloader that is an older version than the version 4 on your phone. I don't think you can downgrade the BL version. The fifth character from the end is the BL version. (e.g. G955USQU4CRE1) Also, you may need a newer version of ODIN.
Smithfolk4 said:
I am not an expert, but it sounds like you are trying to flash a bootloader that is an older version than the version 4 on your phone. I don't think you can downgrade the BL version. The fifth character from the end is the BL version. (e.g. G955USQU4CRE1) Also, you may need a newer version of ODIN.
Click to expand...
Click to collapse
so could i just google a "verison 4 BL for s8+" or something along those lines?
Kyles89 said:
so could i just google a "verison 4 BL for s8+" or something along those lines?
Click to expand...
Click to collapse
Yes. There are a lot of software versions available. If you use Updato you can search by model number and service provider (listed as region on Updato. I was able to find one with a version 4 bootloader. Similar to your version, but CRE9 at the end. It is an oreo version. Your phone is a model SM-G-955U when you search there. It might take a long time to download. I have sometimes had luck speeding things up by trying to restart the download. Sometimes it just takes a long time. Be careful when you are flashing if you have any desire to go back to a previous version. I am not sure of the limitations.
Another thing you could try that might be easier for you is to go to the JRKruse ROM thread here - https://forum.xda-developers.com/verizon-galaxy-s8+/development/rom-t3771206 and use the instructions he has there to install the ROM. There is another rooted ROM that he has that may also work for you. He has instructions on what to do.
Hello, my galaxy s8 is stuck in rpmb provisioned and its boot looping, I can get to download mode, it doesn't say things such as fuse blown etc. How can I get out of the boot loop? Help is appreciated.
Did you find a fix? Im having a very similar problem. I don't see any stock roms with a v4 bootloader. The most recent seems to be a v3.
Fixed it the way Smithfolk said. I was using the combination rom FA70_G955USQU4ARE1 with a V4 bootloader. I used odin v3.13.1 and flashed verizion G955USQU4CRE9 from Sammobile including the bootloader and it fixed my phone.
I was trying to root my samsung galaxy a5 2017 with TWRP and I accidentally deleted system data. Then, I tried rebooting the phone and it got stuck in a bootloop. To fix this problem I tried flashing stock 8.0 firmware from sammobile via odin and I got this error:
Sw rev. Check fail. Device: 6, binary 5. I think that this means I have to flash the latest stock firmware but there isn't a newer one.
After that, I tried to use my phone by flashing a custom rom (Lineage 15.1) and I discovered that I have no imei,no baseband and no ip adress. I have installed many custom roms but the issue is still there. I am trying to get my phone to work with stock firmware and fix the IMEI issue but odin wont let me flash because of that error. I would appreciate if anyone could help. Thanks.
Flash a firmware version that contains S6 or U6 in the middle, it won't work with U5/S5! Not the Samsung phone S5 or S6, but rather, the firmware version.
For cellular, change the modem firmware, or backup and wipe /data/. /data/data/?.
Unless the efs was wiped (probably not if the baseband version isn't there, load a backup then, only if the efs was wiped don't restore it otherwise, and it must not be a backup created with an older twrp, view the recovery log in the backup folder)
julianmunozvaras said:
I was trying to root my samsung galaxy a5 2017 with TWRP and I accidentally deleted system data. Then, I tried rebooting the phone and it got stuck in a bootloop. To fix this problem I tried flashing stock 8.0 firmware from sammobile via odin and I got this error:
Sw rev. Check fail. Device: 6, binary 5. I think that this means I have to flash the latest stock firmware but there isn't a newer one.
After that, I tried to use my phone by flashing a custom rom (Lineage 15.1) and I discovered that I have no imei,no baseband and no ip adress. I have installed many custom roms but the issue is still there. I am trying to get my phone to work with stock firmware and fix the IMEI issue but odin wont let me flash because of that error. I would appreciate if anyone could help. Thanks.
Click to expand...
Click to collapse
You aren't flashing the current version of software.
Sent from my Samsung SM-A520W using XDA Labs
iloveoreos said:
You aren't flashing the current version of software.
Sent from my Samsung SM-A520W using XDA Labs
Click to expand...
Click to collapse
I tried installing the latest version available and I had the same error.
julianmunozvaras said:
I tried installing the latest version available and I had the same error.
Click to expand...
Click to collapse
Well, I don't know what else could be wrong.
Sent from my Samsung SM-A520W using XDA Labs
julianmunozvaras said:
I tried installing the latest version available and I had the same error.
Click to expand...
Click to collapse
Listen to me, it happened to me 2 days ago, and I came to the conclusion that I was not flash the latest firmware. You need to flash the same firmware with the same bootloader or more recent, the error you receive is because you are flashing an older version of bootloader. Do one thing, type the code *#1234# on the phone keypad
mark the code that gives you on 'AP and look it on Sammobile at https://www.sammobile.com/firmwares/galaxy-a5/SM-A520F/ITV/ select your language and look for the firmware with your own code . You will see that odin flash it.
Samsung A520F Custom Binary Error
Hello please I have been trying to reload my Samsung A520F firmware for a couple of weeks
It all started with the phone trying to update (over WIFI) and somewhere along the line files must have gotten corrupted
This led to the phone constantly restart and shutting down applications
I decided to just download the firmware and use Odin to reload. This, unfortunately, didn't go so well as now the phone isn't starting up anymore but can still get to download mode.
PDA firmware is A520FXXUACSE6
Region is EUR
Network is OPEN
every time I use this firmware I get the error
" Custom binary (BOOT) Blocked by FRP Lock
Please note currently at the moment phone refuses to boot up I read about removing OEM lock and don't know if this is the problem.
Please could you help out
koolblowkid said:
Hello please I have been trying to reload my Samsung A520F firmware for a couple of weeks
It all started with the phone trying to update (over WIFI) and somewhere along the line files must have gotten corrupted
This led to the phone constantly restart and shutting down applications
I decided to just download the firmware and use Odin to reload. This, unfortunately, didn't go so well as now the phone isn't starting up anymore but can still get to download mode.
PDA firmware is A520FXXUACSE6
Region is EUR
Network is OPEN
every time I use this firmware I get the error
" Custom binary (BOOT) Blocked by FRP Lock
Please note currently at the moment phone refuses to boot up I read about removing OEM lock and don't know if this is the problem.
Please could you help out
Click to expand...
Click to collapse
Obviously you are frp locked. But I didn't think that blocked from flashing official.
Recently I rooted my S9 and installed Lineage OS but I didnt like it and decided to swap back to the stock OS. I used Frija to get the .tar.md5 files for Odin but once I select all the files and hit start the log in Odin loads up to system.img then stops and I get the SW REV. CHECK FAIL(BOOTLOADER) DEVICE: 7. BINARY: 6 error on my phone. Any idea on how to fix this? I'd really appreciate some help as I'm going to be travelling soon and I need my phone for it and I'd prefer not to use Lineage OS. Thanks in advance.
Do you have an At&t branded phone? SM-G960U?
I am having a very similar problem. A customer came in and was having issues with device. I told them to back up, wipe, and update device. That didn't work so I tried a full flash with ODIN. Now I can't get the phone to boot at all and it says, "Secure Check Fail : Modem" and "Unauthorized software visit nearest AT&T blah, blah,..)
I think it is because AT&T has pushed out the latest update(OCT. 18th), but the Odin files are not out yet. According to:
https://www.att.com/devicehowto/tutorial.html#!/stepbystep/id/stepbystep_KM1253489?make=Samsung&model=SamsungG965U
G960USQS7CSI5 is the latest FW. If you google it, there are only four results.
Yep, the problem was the phone was on the latest FW. Newer firmware was just uploaded a few days ago.
I flashed:
G960USQU7CSJ2_G960UOYN7CSJ2_CHA
and now I'm booting again.
Your problem is that your firmware is too old. Basically, you are trying to downgrade your FW. The phone is basically saying, "Hey, I have bootloader 7, I won't let you install something lower than that."
ma777 said:
Your problem is that your firmware is too old. Basically, you are trying to downgrade your FW. The phone is basically saying, "Hey, I have bootloader 7, I won't let you install something lower than that."
Click to expand...
Click to collapse
^^^^ this ^^^^
the Odin error is telling you that youre trying to flash a revision of the bootloader than was last installed on the phone. to to sammobile.com/fimrwares and get the one with the correct bootloader for your specific phone and flash that.
also download the firmware with the frija tool or samfirm. trust me, its literallt 5x faster than a direct download from the site. The 5 min it takes to get samfirm up and running is worth it, believe me on that.
I may be new to this, But I just Flashed a SM-g960u, That Had Bootloader7 locked on it, When I would go into download mode I would see FRP ON, and this Firmware G960USQU7CSK6. So I downloaded a Combination Firmware file. Used Odin Patched, Flashed it there is a guide out there. Restarted into the Settings, Turned on Developer mode, USB Debugging, and Was able to change OEM-Software install. Then I was able to load this phone after, with G960USQS7CSI5 with ease My first flash and I had to bypass a FRP and a Bootloader lock. Now I should be able to flash this to the U1 version unlocked and be good! If you need any help I did just do this last night I can guide you in the right dirrection. Litterally I had no help from here as in asking questions I am pretty savy. So you need to make sure your Version has the "7" in the Same Place. Also after I enabled those things while in the phone before Flashing it I chose the Factory Reset from within, SO it erashed EVERYTHING except Download Mode and the Combination Firm Loaded. Meaning I should have been able to flash to anything I wanted
Nightfox619 said:
I may be new to this, But I just Flashed a SM-g960u, That Had Bootloader7 locked on it, When I would go into download mode I would see FRP ON, and this Firmware G960USQU7CSK6. So I downloaded a Combination Firmware file. Used Odin Patched, Flashed it there is a guide out there. Restarted into the Settings, Turned on Developer mode, USB Debugging, and Was able to change OEM-Software install. Then I was able to load this phone after, with G960USQS7CSI5 with ease My first flash and I had to bypass a FRP and a Bootloader lock. Now I should be able to flash this to the U1 version unlocked and be good! If you need any help I did just do this last night I can guide you in the right dirrection. Litterally I had no help from here as in asking questions I am pretty savy. So you need to make sure your Version has the "7" in the Same Place. Also after I enabled those things while in the phone before Flashing it I chose the Factory Reset from within, SO it erashed EVERYTHING except Download Mode and the Combination Firm Loaded. Meaning I should have been able to flash to anything I wanted
Click to expand...
Click to collapse
got no help here? how so? I see you got the info you needed to get the phone back up and running properly via asking about it here.
with regard to the bootloader version of 7 in your case, it is a very known thing that whatever bootloader version youre on, you cant go backwards from.
In either event, im very glad that you got it up and running!!
Youdoofus said:
got no help here? how so? I see you got the info you needed to get the phone back up and running properly via asking about it here.
with regard to the bootloader version of 7 in your case, it is a very known thing that whatever bootloader version youre on, you cant go backwards from.
In either event, im very glad that you got it up and running!!
Click to expand...
Click to collapse
Getting no help was meant I hadn't Posted asking Questions, I read everything ya'll put up and I was able to do it on my own without continuing to ask, so Yeah I did get help here but not by asking only reading what is available
downgrade samsung sm-g570m
Nightfox619 said:
I may be new to this, But I just Flashed a SM-g960u, That Had Bootloader7 locked on it, When I would go into download mode I would see FRP ON, and this Firmware G960USQU7CSK6. So I downloaded a Combination Firmware file. Used Odin Patched, Flashed it there is a guide out there. Restarted into the Settings, Turned on Developer mode, USB Debugging, and Was able to change OEM-Software install. Then I was able to load this phone after, with G960USQS7CSI5 with ease My first flash and I had to bypass a FRP and a Bootloader lock. Now I should be able to flash this to the U1 version unlocked and be good! If you need any help I did just do this last night I can guide you in the right dirrection. Litterally I had no help from here as in asking questions I am pretty savy. So you need to make sure your Version has the "7" in the Same Place. Also after I enabled those things while in the phone before Flashing it I chose the Factory Reset from within, SO it erashed EVERYTHING except Download Mode and the Combination Firm Loaded. Meaning I should have been able to flash to anything I wanted
Click to expand...
Click to collapse
hi Nightfox619.! I have a samsung sm-g570m and I trying to downgrade to binary 2 when I flash with odin it give me this error message "sw rev check fail bootloader device 7 binary 3" any idea how can I downgrade .??
pol1345 said:
hi Nightfox619.! I have a samsung sm-g570m and I trying to downgrade to binary 2 when I flash with odin it give me this error message "sw rev check fail bootloader device 7 binary 3" any idea how can I downgrade .??
Click to expand...
Click to collapse
Ok so first you should post I'm your devices threads but that aside. Here's what's up. You can't downgrade the error shown is saying your device is on a bit 7 binary. Your trying to flash a bit 3 binary which isn't even 2 you need to find your respective firmware in a bit 7 or higher.
TheMadScientist said:
Ok so first you should post I'm your devices threads but that aside. Here's what's up. You can't downgrade the error shown is saying your device is on a bit 7 binary. Your trying to flash a bit 3 binary which isn't even 2 you need to find your respective firmware in a bit 7 or higher.
Click to expand...
Click to collapse
thanks 4 answering bro and sorry 4 using this thread.! so definitely I can't downgrade 2 a lower binary than 7..?
pol1345 said:
thanks 4 answering bro and sorry 4 using this thread.! so definitely I can't downgrade 2 a lower binary than 7..?
Click to expand...
Click to collapse
Like 99.9%. That's what that error is. The bootloader is blocking downgrade
pol1345 said:
thanks 4 answering bro and sorry 4 using this thread.! so definitely I can't downgrade 2 a lower binary than 7..?
Click to expand...
Click to collapse
yes, if you get a firmware version matching the one last installed on your device, itll go right thru and boot just fine. Goodlock is finally working on all modules for A10 as well. Maybe we will see more development occur with this shutdown going on. Let us know if you run into any trouble, the error you were getting is totally resolvable!
at the end I give up on it..! my internet 2 slow 4 go downloading & trying rom after rom.! i am from venezuela.
Nightfox619 said:
I may be new to this, But I just Flashed a SM-g960u, That Had Bootloader7 locked on it, When I would go into download mode I would see FRP ON, and this Firmware G960USQU7CSK6. So I downloaded a Combination Firmware file. Used Odin Patched, Flashed it there is a guide out there. Restarted into the Settings, Turned on Developer mode, USB Debugging, and Was able to change OEM-Software install. Then I was able to load this phone after, with G960USQS7CSI5 with ease My first flash and I had to bypass a FRP and a Bootloader lock. Now I should be able to flash this to the U1 version unlocked and be good! If you need any help I did just do this last night I can guide you in the right dirrection. Litterally I had no help from here as in asking questions I am pretty savy. So you need to make sure your Version has the "7" in the Same Place. Also after I enabled those things while in the phone before Flashing it I chose the Factory Reset from within, SO it erashed EVERYTHING except Download Mode and the Combination Firm Loaded. Meaning I should have been able to flash to anything I wanted
Click to expand...
Click to collapse
I have S20+ running Android 11 with U7 Binary. I tried downgrading to Androi 10 which has Binary U5. Now I have downloaded the Binary U5 file. But in some video, he is telling that you should download the Binary File with the same number as it is currently installed in your phone, which in my case is U7. So? Am I supposed to download U7 Combination Binary file and flash it in order to downgrade to Android 10
OR
Should I flash the U5 Combination File and flash the Android 10 AP, CSC, BL, HOME ???
Someone has Combination file to G960F with bootloader SF (Version 15)?
Hi Guys,
About a month ago I got new Galaxy S9 with firmware G960FXXSBETH2,
As it turned out it has all kind of reception issues, so I tried to find alternate ROM for it to see if this issue can be improved.
While searching for ROM at Sammobile.com I noticed that the latest version for my region is different than the one I have on my device, and in fact I should have firmware G960FXXUAETG3.
I got ODIN (3.14.4) but when tried to flash the alternate firmware got this message:
"sw rev check fail bootloader device 11 binary 10"
So as it seems this device came with high boot-loader version 11 and I understand that I can not downgrade it either way - correct me if I'm wrong on this.
So what are my options on this?
Is there an alternate ROM that I could use? Maybe a customized one?
Or am I'm stuck with this firmware,
Many thanks