Related
MTC8-KLD6-V2.81
Rooted with Malaysk's latest ROM
For the past month or so, my phone (HTC M8) has flawlessly mirrored with my Head Unit. THEN came a Marshmallow update. Now my HU/phone mirroring is as follows;
1) Plug Phone into USB port.
a)bug icon shows on phone's top banner
2) Press Easy Connected on Head Unit
a) Four blue bars on HU light up as expected
b) Phone now asks if USB should be used for Screen Mirroring (can only press "Just Once", because "Always" is grayed out)
c) I have tried several different ways to deal with 2.b., but I get the same end result
3) Phone enters Drive Mode (I have also turned this off, but no different result)
4) Head Unit spins its wheels for a while, then claims to enter Screen Mirroring, but all I get is a blank screen with the "Home", "Back", "Exit" buttons on the bottom
a) Phone itself never shows on the Head Unit.
As an aside, I tried to use my phone on Chromecast last week. It look forever to play a single YouTube clip, and when I tried to play a different one, "play" and "pause" would work, but it never actually went to the next video. Pressing play on my phone would start the second video on my phone and also start the FIRST video on the tv.
Any ideas?
Thanks
I also have the same problem. I changed my Note3 on GalaxyS7 and said goodbye to ScrenMirroring I really do not like it. Autoradio should update to Android Lollipop and the problem would disappear. But if even our AndroidAutoradio live to see the renovation
NYCAR said:
MTC8-KLD6-V2.81
Rooted with Malaysk's latest ROM
For the past month or so, my phone (HTC M8) has flawlessly mirrored with my Head Unit. THEN came a Marshmallow update. Now my HU/phone mirroring is as follows;
1) Plug Phone into USB port.
a)bug icon shows on phone's top banner
2) Press Easy Connected on Head Unit
a) Four blue bars on HU light up as expected
b) Phone now asks if USB should be used for Screen Mirroring (can only press "Just Once", because "Always" is grayed out)
c) I have tried several different ways to deal with 2.b., but I get the same end result
3) Phone enters Drive Mode (I have also turned this off, but no different result)
4) Head Unit spins its wheels for a while, then claims to enter Screen Mirroring, but all I get is a blank screen with the "Home", "Back", "Exit" buttons on the bottom
a) Phone itself never shows on the Head Unit.
As an aside, I tried to use my phone on Chromecast last week. It look forever to play a single YouTube clip, and when I tried to play a different one, "play" and "pause" would work, but it never actually went to the next video. Pressing play on my phone would start the second video on my phone and also start the FIRST video on the tv.
Any ideas?
Thanks
Click to expand...
Click to collapse
Your need updated EasyConnect app that fixes this issue. Due to android versions, here is the updated version of it
xterm305 said:
Your need updated EasyConnect app that fixes this issue. Due to android versions, here is the updated version of it
Click to expand...
Click to collapse
Sadly, I already purchased a new phone. But thanks for the updated app, I'll hold onto it in case my new phone gets an update.
I was looking all over for this, thanks
My new phone updated to Marshmallow last night (against my wishes and despite my efforts to stop it). Now I'm back to not working.
I'll try that updated app, but I'm not holding my breath. All my searching has revealed threads where people have said that the apk will not update and I have not found a single example of someone with Marshmallow who has Screen Mirroring working.
I am pleased to report that the above update to EasyConnected worked and I am now able to mirror my phone (Marshmallow 6.0.1) once again.
I was ok with Marshmallow on my Nexus 6P but cant to mirroring not that I upgraded to Android Nougat 7.0
Hopefully someone like xterm305 will come along again and provide a link to an updated .apk.
In the meantime, try rebooting your head unit. That has worked for me in the past when my phone wouldn't mirror (but, that was not when it updated).
Malaysk has a link to this thread that might help, DanB0Y. Please let us know.
http://forum.xda-developers.com/showpost.php?p=66305928&postcount=2978
I think you need to remove an .apk from your phone and then connect it to your stereo again though the usb.
Hey everybody i have a problem with Easy connected in Honda connect by HRV and i have an error 0x11 its adb-ec not found not exist. Whats is this?
PIFS2 said:
Hey everybody i have a problem with Easy connected in Honda connect by HRV and i have an error 0x11 its adb-ec not found not exist. Whats is this?
Click to expand...
Click to collapse
Enable USB Debugging in Developer settings
Hi all!
Recently I had a few problems with my MTCB-MD, but I managed to install new Android OS via PC and RK Batch tool. I still have a problem with a POWER BUTTON (and all buttons on the right side). Definitely the problem is MCU version. Stock was MTCB-MD-1.83V but since I updated it with MD-2.67 there is a problem with buttons, POWER BUTTON acts like HOME button and buttons on the right side (EJECT, MENU and BACK) are not working at all. I have tried to change a keymap in factory settings but buttons are still not working.
Question is: Does anyone know where to find MCU version MD-1.83V (MD-2.08V is oldest I could find) and is there any way to flash it from PC ( since POWER BUTTON is not working therefore I cannot make any selection in Recovery menu)???
THANKS IN ADVANCE!!!
Is it possible to flash MCU MD-2.08v with ADB, or maybe simulate power button key with adb or some other software?
blackwood91 said:
Is it possible to flash MCU MD-2.08v with ADB, or maybe simulate power button key with adb or some other software?
Click to expand...
Click to collapse
No - the MCU has nothing to do with Android, but you can connect a mouse to your unit and do it that way.
Thanks @typos1! I figured out, but forgot to post
Last year my GF bought me Corto WKB-01 for controling PC when watching movies etc...I tried it on headunit and it works. In recovery i was using arrows to navigate and OK/ENTER key instead of POWER and managed to install MCU version MD-2.08V but POWER button is still not working. Definitely if I don´t find factory MCU 1.83V I am going to install in my car wipp switch on ACC line to keep HU off when I need only engine running or steering wheel unlocked....
blackwood91 said:
Thanks @typos1! I figured out, but forgot to post
Last year my GF bought me Corto WKB-01 for controling PC when watching movies etc...I tried it on headunit and it works. In recovery i was using arrows to navigate and OK/ENTER key instead of POWER and managed to install MCU version MD-2.08V but POWER button is still not working. Definitely if I don´t find factory MCU 1.83V I am going to install in my car wipp switch on ACC line to keep HU off when I need only engine running or steering wheel unlocked....
Click to expand...
Click to collapse
It is strange it does not work, have you tried contacting your seller and asking for the MCU ? Have you tried different key maps with v2.08 ?
typos1 said:
It is strange it does not work, have you tried contacting your seller and asking for the MCU ? Have you tried different key maps with v2.08 ?
Click to expand...
Click to collapse
To be honest I didn´t tried other key maps, I´ll try it today. POWER button now on home screen acts as MENU button, and in the apps as HOME button (Previously it acted as HOME button on short key press, and on long it was opening navi app).
Unit was bought used (I broke my rule about not buying used electronics) for a more than a fair price (about 110-120$, unit was old about a year and dude I bought it from was 10km far from me). I´ve tried on net to find manufacturer but for MD someone say it´s Rhythm Audio (no info about that manufacturer on the internet) and someone say it´s unknown. Only sure thing is that it´s from China and it´s not any of the other well known unit manufacturers (JY, KLD...)... Anyway, my mistake paysback, I didn´t run backup of original Android and MCU before update But definitely if i don´t fix it I will install a separate switch.
I had a problem few months ago while servicing my car suspension, I had to unlock steering wheel and HU was running on all time.
The other reason I need power switch is that HU draws a lot of power from the battery. Since I have TDI it draws aditional power from battery for heater plugs (especially in cold days). In a combination with HU automatic power on via key, I am afraid that I will soon kill the battery.
blackwood91 said:
To be honest I didn´t tried other key maps, I´ll try it today. POWER button now on home screen acts as MENU button, and in the apps as HOME button (Previously it acted as HOME button on short key press, and on long it was opening navi app).
Unit was bought used (I broke my rule about not buying used electronics) for a more than a fair price (about 110-120$, unit was old about a year and dude I bought it from was 10km far from me). I´ve tried on net to find manufacturer but for MD someone say it´s Rhythm Audio (no info about that manufacturer on the internet) and someone say it´s unknown. Only sure thing is that it´s from China and it´s not any of the other well known unit manufacturers (JY, KLD...)... Anyway, my mistake paysback, I didn´t run backup of original Android and MCU before update But definitely if i don´t fix it I will install a separate switch.
I had a problem few months ago while servicing my car suspension, I had to unlock steering wheel and HU was running on all time.
The other reason I need power switch is that HU draws a lot of power from the battery. Since I have TDI it draws aditional power from battery for heater plugs (especially in cold days). In a combination with HU automatic power on via key, I am afraid that I will soon kill the battery.
Click to expand...
Click to collapse
No, you didnt make any mistake, its a good unit for a good price, I have heard of people with similar a problem who bought their unit new.
The problem is that we do not have many MCUs for this type.
It is impossible to back up the MCU so you made no mistake there either.
And also, most modern electronics are from China, whatever badge they have on the front (the iphone is made in China for instance).
An extra power switch is a good idea anyway, but you could also try remapping the buttons using an Xposed module, you could also try another ROM that may make your buttons come back.
Another thing you could try is upgrading back to v2.83, somehow this make make the buttons work correctly, I have heard this working before. And have you tried the "touchmap" option in factory settings ?
typos1 said:
No, you didnt make any mistake, its a good unit for a good price, I have heard of people with similar a problem who bought their unit new.
The problem is that we do not have many MCUs for this type.
It is impossible to back up the MCU so you made no mistake there either.
And also, most modern electronics are from China, whatever badge they have on the front (the iphone is made in China for instance).
An extra power switch is a good idea anyway, but you could also try remapping the buttons using an Xposed module, you could also try another ROM that may make your buttons come back.
Another thing you could try is upgrading back to v2.83, somehow this make make the buttons work correctly, I have heard this working before. And have you tried the "touchmap" option in factory settings ?
Click to expand...
Click to collapse
No, I didn´t tried touchmap because, but will. Also, I will update agaon MCU to v2.83 because it makes HU with latest Malaysk ROM work more stable. Swich will be installed soon, along with switches for aftermarket seat heaters, just to find the right place on dash. Thanks man for your time and patience, hope it will be ok.
No, I didn´t tried touchmap because I was not sure that it is related with hard keys , but will do. Also, I will update again MCU to v2.83 because it makes HU with latest Malaysk ROM work more stable. Swich will be installed soon, along with switches for aftermarket seat heaters, just to find the right place on dash. Thanks man for your time and patience, I hope that I would fix it.
blackwood91 said:
No, I didn´t tried touchmap because, but will. Also, I will update agaon MCU to v2.83 because it makes HU with latest Malaysk ROM work more stable. Swich will be installed soon, along with switches for aftermarket seat heaters, just to find the right place on dash. Thanks man for your time and patience, hope it will be ok.
Click to expand...
Click to collapse
Good luck, if going back to v2.83 doesnt restore your buttons, hopefully remapping them will
Hello,
any ideea how to erase and replace the bootloader on Lenovo P1.
The story behind:
About 1 year ago I was a cheap bastard and bought a Chinese version of P1 (saved 30 euros).
All went well, till about 2 months ago, when screen starting to act up ( taping all by itself).
I initially thought that was a hardware problem, but then, back button stopped working and trying to tap on "Power Off" also not working. Would only accept tap on "Restart". Later on I recognized that I can not tap the "install" button in Google Play (could tap anything else though).
I started to think is a software issue (like a virus whatever) and flash the lineage OS 14.1 ROM.
The screen is no longer acting up but the back button and install button in Google Play still not working.
Therefore, now I recognize that the problem might be in the Chinese bootloader, which I will also gladly replace if I knew how. That´s why I´m here.
BTW: in safe mode everything is working (even the "back" button).
Any thoughts?
Regards,
Dan
danielovici1 said:
Hello,
any ideea how to erase and replace the bootloader on Lenovo P1.
The story behind:
About 1 year ago I was a cheap bastard and bought a Chinese version of P1 (saved 30 euros).
All went well, till about 2 months ago, when screen starting to act up ( taping all by itself).
I initially thought that was a hardware problem, but then, back button stopped working and trying to tap on "Power Off" also not working. Would only accept tap on "Restart". Later on I recognized that I can not tap the "install" button in Google Play (could tap anything else though).
I started to think is a software issue (like a virus whatever) and flash the lineage OS 14.1 ROM.
The screen is no longer acting up but the back button and install button in Google Play still not working.
Therefore, now I recognize that the problem might be in the Chinese bootloader, which I will also gladly replace if I knew how. That´s why I´m here.
BTW: in safe mode everything is working (even the "back" button).
Any thoughts?
Regards,
Dan
Click to expand...
Click to collapse
AFAIK, the only software that could do the trick is QSPT
Hi All,
I recently did the Kia hack and installed some extra apps. Stupidly I pressed update within the android menu.
I now have a continuing bootloop which goes round three times stating the system is updating. It flashes three
times and then completely reboots and start the cycle.
i have scoured the internet for the past three days and the only resolution I can find is to remove the unit and flash
it by soldering. This is an extreme I don't want to go to.
Just looking for some advice if anyone knows how to get into the android recovery mode through pressing buttons or
if i can write something to an SD card that will allow the update to continue?
Any advice would be greatly appreciated!
Ryangrimesuk said:
Hi All,
I recently did the Kia hack and installed some extra apps. Stupidly I pressed update within the android menu.
I now have a continuing bootloop which goes round three times stating the system is updating. It flashes three
times and then completely reboots and start the cycle.
i have scoured the internet for the past three days and the only resolution I can find is to remove the unit and flash
it by soldering. This is an extreme I don't want to go to.
Just looking for some advice if anyone knows how to get into the android recovery mode through pressing buttons or
if i can write something to an SD card that will allow the update to continue?
Any advice would be greatly appreciated!
Click to expand...
Click to collapse
I imagine you attempted the hard reset button correct? I used to work for a Kia dealer, and you I screwed up someones mapnsoft update to add apple carplay into a 2016 Sportage and one of the techs had an update USB that I used to kick it out of its boot loop. Maybe call a service department and ask if they'd spare you five mins.
I'm having a 7 month ordeal with my head unit being stuck on the UVO screen, curious what information you read about soldering? I've completely obsessed over the PCB boards inside of my head unit and can't find any UART or JTAG serial ports that stand out.
Ryangrimesuk said:
Hi All,
I recently did the Kia hack and installed some extra apps. Stupidly I pressed update within the android menu.
I now have a continuing bootloop which goes round three times stating the system is updating. It flashes three
times and then completely reboots and start the cycle.
i have scoured the internet for the past three days and the only resolution I can find is to remove the unit and flash
it by soldering. This is an extreme I don't want to go to.
Just looking for some advice if anyone knows how to get into the android recovery mode through pressing buttons or
if i can write something to an SD card that will allow the update to continue?
Any advice would be greatly appreciated!
Click to expand...
Click to collapse
Did You manage with Your problem?
Hey there everybody.
So I was using the stylus normally until the firmware update shows up, after a error on update the pen doesn't show up any more. I already tried to restore/restart the tablet and Bluetooth but without any success.
When I attech doesn't show anything, but when I remove pop a notification in red "charge your stylus now". BTW it already was in 100% b4 the update error.
Update: Apparently it's now showing as "K81 CS(DFU)" on Bluetooth and when I try to pair it says "couldn't pair with K81 CS (DFU) because of an incorrect PIN or pass key"
I have the exact same problem...any solution found yet?
Had this problem when i tried to update 1st time my gf Stylus on her tablet, first i tried with the (original) magnetic cover on and the stylus went onto DFU mode, i pressed on the button closer to the tip for about 10 seconds and the stylus went to normal mode(if i recall right). if this doesn't work try maybe the second button, or both at the same time.
Then i updated the stylus on my tablet without the magnetic cover.
Later received my own stylus and did the update procedure directly whitout the magnetic cover.
If the above doesn't work try to deplete the stylus battery, don`t connect the stylus to the tablet and leave it alone. i don't know the exact time it will last, maybe two days, or maybe a week or more, it has a tiny battery (25 mAh).
If succesfull reboot the table once, be sure to have the stylus linked but not attached to the tablet to be extra safe.
Good luck.
NeoDaemon said:
Had this problem when i tried to update 1st time my gf Stylus on her tablet, first i tried with the (original) magnetic cover on and the stylus went onto DFU mode, i pressed on the button closer to the tip for about 10 seconds and the stylus went to normal mode(if i recall right). if this doesn't work try maybe the second button, or both at the same time.
Then i updated the stylus on my tablet without the magnetic cover.
Later received my own stylus and did the update procedure directly whitout the magnetic cover.
If the above doesn't work try to deplete the stylus battery, don`t connect the stylus to the tablet and leave it alone. i don't know the exact time it will last, maybe two days, or maybe a week or more, it has a tiny battery (25 mAh).
If succesfull reboot the table once, be sure to have the stylus linked but not attached to the tablet to be extra safe.
Good luck.
Click to expand...
Click to collapse
Hi there.
Unfortunately it doesn't work.
I left the battery dry and did all the rest, but when I try to connect to the pen in dfu mode it says "couldn't pair with K81 CS(DFU) because of an incorrect PIN or password".
Okay for some magical reason it worked today.
B4 I tried all the things again I opened the " service & feedback" app and started a "get Bluetooth log" and for some unknown reason it worked.
The LKS said:
Okay for some magical reason it worked today.
B4 I tried all the things again I opened the " service & feedback" app and started a "get Bluetooth log" and for some unknown reason it worked.
Click to expand...
Click to collapse
What is all the things ? Please let me know
hi, can someone explain me what to do? I tried the above but it didn't work
Hi! I'm having exactly the same problem. Firmware update error and then with "K81 CS(DFU)".
Did anyone manage to solve it?
joaojunior said:
Hi! I'm having exactly the same problem. Firmware update error and then with "K81 CS(DFU)".
Did anyone manage to solve it?
Click to expand...
Click to collapse
no, no one could answer me, xiaomi assistance is zero. in the end I made the return of the tablet and pen as I could not any way if it was a pen or tab problem. i took a s7 tab and i am noticing that there is a sea of difference between software and support. i will not touch xiaomi products anymore
joaojunior said:
Hi! I'm having exactly the same problem. Firmware update error and then with "K81 CS(DFU)".
Did anyone manage to solve it?
Click to expand...
Click to collapse
I found the solution for me here .. its about the contacts and location permissions.
Xiaomi Smart Pen firmware update error
Good evening all, From 2 days I'm trying to update my Smart Pen, but always I got an error. Also I was looking on xiaomi.cn but method with turning on and off WiFi and Bluetooth location doesn't work. Maybe somebody here met this problem too...
forum.xda-developers.com
kvanlier said:
I found the solution for me here .. its about the contacts and location permissions.
Xiaomi Smart Pen firmware update error
Good evening all, From 2 days I'm trying to update my Smart Pen, but always I got an error. Also I was looking on xiaomi.cn but method with turning on and off WiFi and Bluetooth location doesn't work. Maybe somebody here met this problem too...
forum.xda-developers.com
Click to expand...
Click to collapse
Thanks, but this solution is for those who can connect the pen but cannot update the firmware.
In my case, the pen doesn't even connect to the tablet anymore, so I can't change the contact sharing permissions.
Hey guys so I tried multiple message and I finally got it working.
I reseted the Bluetooth and Wi-Fi preferences.
I tried to hold the front button for 10 seconds.
I tried holding the back button for 10 seconds.
I called xiaomi support and they told me to reset the Bluetooth on Wi-Fi preferences and so I did that. Then I got a notification that my xiaomi pen update was complete and I noticed that now it was connected to my tablet.
Anyone else who didn't have luck by their side?
Still have the same problem. Showing k81 C's after update my miui to 13.1.3. any other suggestion what to do to fix it
how to solve this problem k81cs(dfu)
I got the same problem with the pen who appears as K81 CS(DFU), i'm trying a lot of things, but nothing works. If anyone got an other tip :/
I keep getting please chatge your stylus now eveen after 100% fix this so annoying
Same problem.
Mi Pad 5 global version 13.1.5
Mi Smart Pen was purchased from Amazon.de - and recently turned with "K81 CS(DFU)" issue.
There is no way to update the firmware as the firmware update is disabled. Attaching and detaching pen reports "Charge your stylus now" so there is some communication going on between both devices.
I've used the service and feedback to send the logs. Tried all workarounds described on XDA forums, nothing seems to help.
there is a lsposed module named maxmipad it removes bluetooth authentication so try it i dont have the pen