Hi guys ... I downloaded a movie from telegram in rar file, I give it to open, it asks me with what app, I select Es explorer, I go to the file but it throws me error. I try with the app rar, extract the file but again it gives me an error. Impossible to see the movie. I am using android 6 MM official Samsung. Can someone guide me?
Regards
Related
HOW I CAN UPDATE MY JASJAR FROM JASJAR_WWE_11353_137_10301 TO JASJAR_ITA_11346_126_10301_ship??
COUNTRY ID ERROR
Thanks and excuse my english
Just unpack/extract the JASJAR_ITA_11346_126_10301_ship file into a directory.
donwload the attached file to this same directory
Run it and the Country ID error will come out, run it again right after, and it should work
what you mean with "download the attached file to the same directory"....which file??
Thanks
Carlo Salvatore :x
thanks, but the update is ok without country error, but after the reset the screen is black with word: serial and v1.0
sorry...i found out the file you put for download but if i run the rom twice after have the rom and the file in the same directory i have the same error message....coul you please help me?
Thanks
Carlo Salvatore
carsa read pm
did IT!!!!...thank a lot...
carsa help me in private, please
edoalom hope everithing was fine!
i've the same problem, can you help me, too?
directory?
carsa said:
what you mean with "download the attached file to the same directory"....which file??
Thanks
Carlo Salvatore :x
Click to expand...
Click to collapse
I've got the .exe file and it simply wants to self-install in a directory with my JJ. So, which directory should I try to install this then?
thanks.
edved
Just extract the rom required using winrar or similar (normally done by right clicking on the file and selecting extract)
donwload the file "MaUpgradeUt_noID.exe"
Copy this file into the directory
Run it and the Country ID error will come out, run it again right after, and it should work
Italian to English
I purchased an imate jasjar in Italy last week. The salesperson confirmed that I can change the language from Italian to English. But when I contacted the Imate people they say it is not possible, Can someone guide me?
Thanks Felician
hanhha2000 said:
Just extract the rom required using winrar or similar (normally done by right clicking on the file and selecting extract)
donwload the file "MaUpgradeUt_noID.exe"
Copy this file into the directory
Run it and the Country ID error will come out, run it again right after, and it should work
Click to expand...
Click to collapse
Hi hanhha2000, the required rom that I wanted to flash is with a .exe extension behind, how can we use winrar with this type of file, hope you can enlighten me as I have also ran in Country ID Error problems, thank you.
Will this technique work for my i-mate JAMin? im just afraid to screw up my device completely cos iv heard that that can happen
thanx for your help pls reply asap
I've the same problem. can you help me to solve. tnk
DeVegas said:
Hi hanhha2000, the required rom that I wanted to flash is with a .exe extension behind, how can we use winrar with this type of file, hope you can enlighten me as I have also ran in Country ID Error problems, thank you.
Click to expand...
Click to collapse
Hi,
The way i use is run the update rom and when appear the Country error, open the windows explorer and copy the folder in the temporary folder to a new location, then put the file ...noID.exe in the new folder.
hi guys
i have a .swf object i would like open on my touch hd butvcant find a way to do this. it comes with a .html file but seeing as opera or IE won't open it. the adobe don't even have a standalone app for this. Is there anything I can do?
Any thoughts on this?
I used to have a stand alone Flash player for Windows Mobile. I will see if I can dig it up and post it.
Here is the file I had. You can open SWF files and even create stand alone projector files with it. I used it on my Wizard, but haven't tried it on my HD yet.
The text file in the zip says...
*** I did not made this program , But i thing it is a Macromedia Flash Player 6.0
How to enjoy with (( Flash player ))
--------------------------
1- copy (( Beta Macromedia Flash.EXE )) in your smartphone
2- copy the example file (( Kuwait.swf ))
How to open swf file :
--------------------------------
Try to open Kuwait.swf file in this way
In Smart Explorer or .... e.g. Go to open with --->add to list ---> then select (( Beta Macromedia Flash.EXE ))
you will make it just one time
To Exit the program just click HOME button
*** THIS PROGRAM WILL RUN *.swf FILES
[EDIT]
I jsut tried this and it's not what I thought it was. Sorry. I will keep looking.
THIS IS a Beta PROGRAM
thanks for the suggestion
can u point out the folder???
It resides in the User Temp folder of your windows user profile.
And is deleted as soon as the firmware upgrade is completed on your phone.
can you post the exact compressed file name..what zip utility are you using.
I know winzip is suck..cant unzip alot of stuff.
What size is the package file ?
if the package is stored on non-english characters..that post problem too.
Its just any random file name ending with a TMP extension. Its about 257MB.
e.g. tmp2EFA.tmp
Still no leads to opening this file.
Post the first line of the file: some formats are identifiable based on their opening signature.
Sent from my GT-I9000 using XDA App
i2umi said:
Its just any random file name ending with a TMP extension. Its about 257MB.
e.g. tmp2EFA.tmp
Still no leads to opening this file.
Click to expand...
Click to collapse
What unzip program are you using ?
Can you try change the extension to .7z and use WinRar to unzip it..Winzip no go
Before Kies starts to flash the firmware, it decrypts the .tmp file to .zip file in the same directory. When Kies update window says "Extracting binary file" or something like that, you can copy the zip file from temp directory. It contains one tar and one dll file. Tar file can be flashed with Odin
Norpa76 said:
Before Kies starts to flash the firmware, it decrypts the .tmp file to .zip file in the same directory. When Kies update window says "Extracting binary file" or something like that, you can copy the zip file from temp directory. It contains one tar and one dll file. Tar file can be flashed with Odin
Click to expand...
Click to collapse
If that's the case, are there any other ways to decrypt this file back to zip directly than doing the whole upgrade thing again just for the zip?
hmanxx said:
What unzip program are you using ?
Can you try change the extension to .7z and use WinRar to unzip it..Winzip no go
Click to expand...
Click to collapse
Tired all. no go.
i2umi said:
Tired all. no go.
Click to expand...
Click to collapse
Use the method given on post #8
can anyone pls suggest any good app to open password protected zip and rar files ?
I'm guessing you don't know the password in question?
Depending on the strength of the password, you could be at this for months, if not years.
Since RAR 2.0 your forced to use brute force. And this can be processor intensive. I doubt you'd find anything that will run on the DHD.
Try looking --> Here and do it from your computer.
no I know the password, I just need an app which can open password protected .zip and .rar files
If you know the password, could you not open it on your PC and re-zip it unprotected.
I can but still I need an app which can do it on my DHD, like opening from email attachment a password protected .zip or .rar
I personally don't know of an app that will do it.
Your only option now is to start trawling the Android Market, luckily they have just released the web based Market. Give it a try --> Here
"UnRar Free" (or the PRO version if you buy it) will do this for you.
Desperate for Password
Hi,
Can I pls get the password for the I9003DXKF1 file I downloaded...or at least get help on how to get it...badly need to switch phone back to Froyo...please...really need your help since u know it...
Is that a Samsung Galaxy firmware? You'd have better luck asking in the relevant device forum. Where did you download it from? What took you there? Etc..
Sadly we at XDA do not have crystal balls to answer the vaguest of questions.
saj2001ind said:
can anyone pls suggest any good app to open password protected zip and rar files ?
Click to expand...
Click to collapse
Search for ArchiDroid in the market and it will do your job... It extracts password-protected RAR, ZIP, TAR, GZIP, BZIP2 and 7zip files... amazingly it is free... Unrar didn't work for me but this one works like a charm
if downloaded from http://www.sammobile.com
google search sammobile password and READ !!!!!
## = samfirm------------
# = samsu----------------
* = Incomplete firmware before flashing your device always check our forum!
I may b late but incase anybody else is searching for a result I found one... unrar works wen u pay for it maybe but not the free version, and archidroid does nothing. The one I found to work most efficiently was Archiver hope it helps
Password Recovery Software
naga1982 said:
Search for ArchiDroid in the market and it will do your job... It extracts password-protected RAR, ZIP, TAR, GZIP, BZIP2 and 7zip files... amazingly it is free... Unrar didn't work for me but this one works like a charm
Click to expand...
Click to collapse
There are so many Password Recovery Software are available which you can try your self.
where ?
Where can I download archidroid ?
are you kidding me ?
Forget rar password
vaibhav.pandey said:
There are so many Password Recovery Software are available which you can try your self.
Click to expand...
Click to collapse
How can i open a rar file i forgot password is it possible
On pc use winrar, on android there's an app called rar with all the functionalities of winrar. And it's free but comes with some ads
I cannot find this download anywhere on the Internet. Does someone have a copy they can share? Thank you in advance.
Look at here
Here you can download the full set with a torrent file
Or I attach the torrent file itself to the message