Develop Bugs

HELP ME - COUNTRY ID ERROR

HOW I CAN UPDATE MY JASJAR FROM JASJAR_WWE_11353_137_10301 TO JASJAR_ITA_11346_126_10301_ship??
COUNTRY ID ERROR
Thanks and excuse my english

Just unpack/extract the JASJAR_ITA_11346_126_10301_ship file into a directory.
donwload the attached file to this same directory
Run it and the Country ID error will come out, run it again right after, and it should work

what you mean with "download the attached file to the same directory"....which file??
Thanks
Carlo Salvatore :x

thanks, but the update is ok without country error, but after the reset the screen is black with word: serial and v1.0

sorry...i found out the file you put for download but if i run the rom twice after have the rom and the file in the same directory i have the same error message....coul you please help me?
Thanks
Carlo Salvatore

carsa read pm

did IT!!!!...thank a lot...

carsa help me in private, please

edoalom hope everithing was fine!

i've the same problem, can you help me, too?

directory?
carsa said:
what you mean with "download the attached file to the same directory"....which file??
Thanks
Carlo Salvatore :x
Click to expand...
Click to collapse
I've got the .exe file and it simply wants to self-install in a directory with my JJ. So, which directory should I try to install this then?
thanks.
edved

Just extract the rom required using winrar or similar (normally done by right clicking on the file and selecting extract)
donwload the file "MaUpgradeUt_noID.exe"
Copy this file into the directory
Run it and the Country ID error will come out, run it again right after, and it should work

Italian to English
I purchased an imate jasjar in Italy last week. The salesperson confirmed that I can change the language from Italian to English. But when I contacted the Imate people they say it is not possible, Can someone guide me?
Thanks Felician

hanhha2000 said:
Just extract the rom required using winrar or similar (normally done by right clicking on the file and selecting extract)
donwload the file "MaUpgradeUt_noID.exe"
Copy this file into the directory
Run it and the Country ID error will come out, run it again right after, and it should work
Click to expand...
Click to collapse
Hi hanhha2000, the required rom that I wanted to flash is with a .exe extension behind, how can we use winrar with this type of file, hope you can enlighten me as I have also ran in Country ID Error problems, thank you.

Will this technique work for my i-mate JAMin? im just afraid to screw up my device completely cos iv heard that that can happen
thanx for your help pls reply asap

I've the same problem. can you help me to solve. tnk

DeVegas said:
Hi hanhha2000, the required rom that I wanted to flash is with a .exe extension behind, how can we use winrar with this type of file, hope you can enlighten me as I have also ran in Country ID Error problems, thank you.
Click to expand...
Click to collapse
Hi,
The way i use is run the update rom and when appear the Country error, open the windows explorer and copy the folder in the temporary folder to a new location, then put the file ...noID.exe in the new folder.

[Q] How to download APKs

How do I download and install an .apk file which is hosted on filesonic? Ive tried downloading multiple files and they end up as .htm or .html
Thanks to the ppl that reply!

Don't download from the phone. Download from a pc, then send the file to the phone.

Exactly then use a file manager like Astro to install.

Oh ok, thanks! I tho I could download from phone u.u

Royalfox said:
Oh ok, thanks! I tho I could download from phone u.u
Click to expand...
Click to collapse
You can try to download opera mobile and use that. Seems to have fixed some if not most of my downloading issues.

I had the same question last week. It got annoying. Maybe now I can try this
World peace with no regard for human life.

You can download apk with the phone, just be sure to open it with the package installer/ I know if you have emulators [especially psx4droid] it'll try to open the apk and say rom not supported [cuz its not a rom].

how i remove startup verizon logo ? urgent

hello ,
how can i remove starting verizon logo??? and i don,t want any other logos,
i just need like stock samsung boot, for note 4

remember i have not .zip file in media folder

Mr Hassan said:
hello ,
how can i remove starting verizon logo??? and i don,t want any other logos,
i just need like stock samsung boot, for note 4
Click to expand...
Click to collapse
You can use a app like this: https://play.google.com/store/apps/details?id=tkstudio.sboot to change boot animation or some ROMS like jasmine rom 7.0 have the original samsung logo boot sequence, for the app to work you need root and read carefully before doing anything. Hope this helps.

-spektor- said:
You can use a app like this: https://play.google.com/store/apps/details?id=tkstudio.sboot to change boot animation or some ROMS like jasmine rom 7.0 have the original samsung logo boot sequence, for the app to work you need root and read carefully before doing anything. Hope this helps.
Click to expand...
Click to collapse
thanks brother for reply i fixed this problem, now i,m in another project , i successfully extract the system,img,ext file,,,,now i edited somethings,
now i want to create again in same file, img,ext4
have you any idea about it?

Mr Hassan said:
thanks brother for reply i fixed this problem, now i,m in another project , i successfully extract the system,img,ext file,,,,now i edited somethings,
now i want to create again in same file, img,ext4
have you any idea about it?
Click to expand...
Click to collapse
Well if you mean like accessing and editing system files I'm not how to do edit them but I know that you can use a app like root explore: https://play.google.com/store/apps/details?id=com.speedsoftware.explorer that's the free version the paid one is $3.99 in the US. With that you can move and add files to system folder you can edit permission of files and things of that nature.

-spektor- said:
Well if you mean like accessing and editing system files I'm not how to do edit them but I know that you can use a app like root explore: https://play.google.com/store/apps/details?id=com.speedsoftware.explorer that's the free version the paid one is $3.99 in the US. With that you can move and add files to system folder you can edit permission of files and things of that nature.
Click to expand...
Click to collapse
ok brother thanks alot,
but i,m talking about stock rom, i already extracted and edit now its need to repack again

Mr Hassan said:
ok brother thanks alot,
but i,m talking about stock rom, i already extracted and edit now its need to repack again
Click to expand...
Click to collapse
Ah ok, so I found these two threads related to the subject one is for repackaging ODIN files if your using a Samsung: https://forum.xda-developers.com/showthread.php?t=2549712&page=5 and the other is a general tutorial on custom roms https://forum.xda-developers.com/showthread.php?t=2195858 Also this article covers mostly everything about creating and installing ROMS http://lazydroid.com/2011/03/howto-repack-and-sign-rom-image-update-zip-files/ I hope this information helps I do not know much about creating or repackaging roms

-spektor- said:
Ah ok, so I found these two threads related to the subject one is for repackaging ODIN files if your using a Samsung: https://forum.xda-developers.com/showthread.php?t=2549712&page=5 and the other is a general tutorial on custom roms https://forum.xda-developers.com/showthread.php?t=2195858 Also this article covers mostly everything about creating and installing ROMS http://lazydroid.com/2011/03/howto-repack-and-sign-rom-image-update-zip-files/ I hope this information helps I do not know much about creating or repackaging roms
Click to expand...
Click to collapse
ok again thanks,
i,m in samsung note 4 , and i found lot of threads to repack but not success, coz i,m counfuse about where i start?
and how, is that need just system folder or all file like hidden ,cache etc etc

Mr Hassan said:
ok again thanks,
i,m in samsung note 4 , and i found lot of threads to repack but not success, coz i,m counfuse about where i start?
and how, is that need just system folder or all file like hidden ,cache etc etc
Click to expand...
Click to collapse
Well system file is where all the data and software is at basically everything visible on the phone. Maybe this article could help it deals with modifying samsung rom and flashing it. If you want to read more on it here's the link: http://android.stackexchange.com/questions/85703/modifying-samsung-rom-and-flashing-it-on-a-device if you wanted to remove apps or add custom apps to your phone you would modify system file.
But what I thought was important was this;
(I did not write this thread)
< "You should be able to use an archive program on PC and recompress to .tar, .gz, and others. Dont forget to re-sign the archive. Keep a copy of your untouched ROM until you have the modified ROM tested and running.
The ROMs are signed with a signature. When repacking if they don't get signed they will fail in flashing. This link will help explain it.
So basically after downloading the firmware you have to rename it so you can extract the files, change them as you need, recompress them again and re-sign them, so you can flash them using Odin." >
This thread was dealing with modifying CM rom;
< "There are multiple solutions available:
Re-Zip the Image
Advantage: You do it once, and can use the resulting image for multiple devices. That's what I did with CM7.2 for my Milestone 2. Easy enough to do:
create a temporary (empty) folder
unzip the zip file to it
remove unwanted *.apk files from /system/apps (be careful of what you remove, of course)
zip up the directory contents again
Using a graphical ZIP manager (like WinZip or the like), steps would be even easier:
open the zip file with the archive manager
remove the unwanted .apk files
if the ZIP manager requires it, save the manipulated zip
Manually cleanup after flashing, using the shell
This is what ce4 recommended in the comments. It requires you using a terminal emulator on your device:
Flash the image as-is
remove superfluous stuff from the system partition by hand (like rm /system/big/junk/example.mp4)
Manually cleanup after flashing, using other tools
Almost the same as the previous method, but a bit more user-friendly. Disadvantage: this won't do for superflous ringtones and the like:
Flash the image as-is
Use a tool like Titanium Backup or Root Uninstaller to remove unwanted system apps" >
Edit: this link explains the signature of the file: (from google) https://code.google.com/archive/p/zip-signer/

-spektor- said:
Well system file is where all the data and software is at basically everything visible on the phone. Maybe this article could
Edit: this link explains the signature of the file: (from google) https://code.google.com/archive/p/zip-signer/
Click to expand...
Click to collapse
yes brother i want to remove some apps,. in system
even some edits in bulid prop
and after repack it for odin , thats it,
i create zip and trying to install the via twrp, during installation in end its give some error like this
setup finish with error 7 etc etc
so i reboot ,.....its reboot normal but after boot base band is unknown
i,m working on verizon devise.
in very simple words i,m trying to create rom without verizon apps and some more edits
and that all work in stock rom

Mr Hassan said:
yes brother i want to remove some apps,. in system
even some edits in bulid prop
and after repack it for odin , thats it,
i create zip and trying to install the via twrp, during installation in end its give some error like this
setup finish with error 7 etc etc
so i reboot ,.....its reboot normal but after boot base band is unknown
i,m working on verizon devise.
in very simple words i,m trying to create rom without verizon apps and some more edits
and that all work in stock rom
Click to expand...
Click to collapse
Ok so I may have found a solution for you it requires a pc and to download a program. You'll need your rom and any apps you would like to insert into it. The program is as simple as right click and delete for any apps you want to remove. The program is made by a developer on XDA named "_Logie" here's the link to the Web page: http://m.tech.firstpost.com/news-analysis/how-to-add-or-remove-apps-from-a-custom-rom-101986.html and the link to the program is on there or here's the direct link: http://www.solidfiles.com/d/da2dd6335d/
This program compiles the ROM into a .zip if you have TWRP recovery you could do a backup of your previous rom before flashing your current one because you'll have to completely wipe every main partition before flashing new rom to ensure you don't run into problems
Edit: backup system, data, and cache because those are the ones you'll need to wipe also before wiping them just in case I would remove any password that locks your phone because if you try to flash a new rom and fails and your left with the recovery file it'll mess up the password, fingerprints will be forget and backup password will be unchangeable and will require a factory reset to be able to change it.

-spektor- said:
.
Click to expand...
Click to collapse
Who its looking cool. I'll try tomorrow
But for now brother i want to know its remove the apps. OK and what about bulid.prop? I need to edit it also. And after edit i don't want root anymore .after edit i need in tar format
I know you think I'm made but i know it's possible

Mr Hassan said:
Who its looking cool. I'll try tomorrow
But for now brother i want to know its remove the apps. OK and what about bulid.prop? I need to edit it also. And after edit i don't want root anymore .after edit i need in tar format
I know you think I'm made but i know it's possible
Click to expand...
Click to collapse
For build.prop maybe this app could help https://play.google.com/store/apps/details?id=com.jrummy.apps.build.prop.editor sorry for lack of knowledge on this subject I've never had to repack a rom before.

-spektor- said:
For build.prop maybe this app could help https://play.google.com/store/apps/details?id=com.jrummy.apps.build.prop.editor sorry for lack of knowledge on this subject I've never had to repack a rom before.
Click to expand...
Click to collapse
Ok apps done
Bulid done
Now final thing need . repack in ext4 format
I'll check these things tomorrow

-spektor- said:
For build.prop maybe this app could help https://play.google.com/store/apps/details?id=com.jrummy.apps.build.prop.editor sorry for lack of knowledge on this subject I've never had to repack a rom before.
Click to expand...
Click to collapse
brother did you found anything for repack ext4 img?

Mr Hassan said:
brother did you found anything for repack ext4 img?
Click to expand...
Click to collapse
Have you tried this guide? https://forum.xda-developers.com/showthread.php?t=1588461

-spektor- said:
Have you tried this guide? https://forum.xda-developers.com/showthread.php?t=1588461
Click to expand...
Click to collapse
yes but its for linux , and for window 99% unsuccessfully rates , have you try in window ? this ?
now i,m in next step if you have the time so kindly share your experience
https://forum.xda-developers.com/android/help/repack-img-giving-error-odin-invalid-t3577719

Hmmmmm ? I think you want to change the boot animation (white Verizon logo red background? ) if so your gonna need to either need to flash a pre-made zip with Flashfire (can't seem to get it to apply from twrp) or your gonna need to manually copy into the appropriate directory (mount system directory r/w copy then change permissions of the file you copied to 644 and reboot) presumably with a root explorer though doable from terminal
---------- Post added at 07:47 PM ---------- Previous post was at 07:29 PM ----------
-spektor- said:
Ok so I may have found a solution for you it requires a pc and to download a program. You'll need your rom and any apps you would like to insert into it. The program is as simple as right click and delete for any apps you want to remove. The program is made by a developer on XDA named "_Logie" here's the link to the Web page: http://m.tech.firstpost.com/news-analysis/how-to-add-or-remove-apps-from-a-custom-rom-101986.html and the link to the program is on there or here's the direct link: http://www.solidfiles.com/d/da2dd6335d/
This program compiles the ROM into a .zip if you have TWRP recovery you could do a backup of your previous rom before flashing your current one because you'll have to completely wipe every main partition before flashing new rom to ensure you don't run into problems
Edit: backup system, data, and cache because those are the ones you'll need to wipe also before wiping them just in case I would remove any password that locks your phone because if you try to flash a new rom and fails and your left with the recovery file it'll mess up the password, fingerprints will be forget and backup password will be unchangeable and will require a factory reset to be able to change it.
Click to expand...
Click to collapse
Try flashing with flasfire enabling the option mount system r/w and use common paths (probably not necessary but won't hurt) I have had difficulty getting anything other than ROM and gapps to apply from twrp but flashfire seems to work . I'm thinking its due to the fact that flashfire flashes after boot loader and then resets prior to os load.

Nubian Emergency Tool 1.1.4 Works with 17 series models

This is the link to download from You will need to translate the website:
I tried to upload the file but the website keeps timing out.
http://bbs.nubia.cn/forum.php?mod=viewthread&tid=1118215&highlight=努比亚急救工具

Can't access to the link, needs an account. Link broken on pan.baidu

ı dıd downloand but wıth vpn :=)

pls upload tool . i cant download from paindu

after 1 day, i unbrick succeessfuly z17 mini. Now i am happy to see it alive .

Here is a link for people who can't access baidu: https://ufile.io/4dyko
This link expires in 4 weeks (Free account sorry)

@EmreGze Thanks, Download in progress

Ursus91 said:
@EmreGze Thanks, Download in progress
Click to expand...
Click to collapse
No problem hope it works out well for you. I had trouble understanding the software but I managed to unbrick my phone with it.

I've a look to the zip file...
The exe file looks "bizarre"
┼¼▒╚ÐÃ╝▒¥╚╣ñ¥▀V1.1.4.exe
The MD5 file is corrupt : "erreur d'entête" in French
I think it is because of the file name. I'll test unzip under linux

Ursus91 said:
I've a look to the zip file...
The exe file looks "bizarre"
┼¼▒╚ÐÃ╝▒¥╚╣ñ¥▀V1.1.4.exe
The MD5 file is corrupt : "erreur d'entête" in French
I think it is because of the file name. I'll test unzip under linux
Click to expand...
Click to collapse
Yes mines like that too for me the program name is:Ŭ±ÈÑǼ±¾È¹¤¾ß. Haha.
I literally had to guess what I had to do to get it working the pictures helped a little.

I change the name using Linux Mint.
I'll upload the file in a few days.
I'll have a look the the text files (resources) in order to give some explanations if I can do it.

Ursus91 said:
I change the name using Linux Mint.
I'll upload the file in a few days.
I'll have a look the the text files (resources) in order to give some explanations if I can do it.
Click to expand...
Click to collapse
There's no need to rename the files/folders using linux. Opening the .zip file in explorer (win10) is enough to uncompress it, then tou can rename files/folders as you like.
The software installs and run just fine. Nubia Z17 is supported up to rel. 3.08 (so it seems exploring the "Recovery" folder under C:\Program Files (x86)\nubia\BackupRecoveryTool.
All the recovery files are in .7z format and password encrypted (don't know at the moment if the password is embedded into the recovery tool main program.

Don't have W10
<HS>
I've some problems too to unlock the boot loader.
After unlock it once and flash TWRP, all other attempts are KO (can't flash with adb).
I wanted to flash the "standard recovery" to install the OTA update (modded 3.08) and reflash after TWRP.
I'll test it later
</HS>

File looks to be corrupt
EmreGze said:
Here is a link for people who can't access baidu: https://ufile.io/4dyko
This link expires in 4 weeks (Free account sorry)
Click to expand...
Click to collapse
Downloaded several times but it looks corrupt.
7-zip can not open it.
Windows explorer extracted it but while running, it says can not find path.

i have the nubia z17 brick. the emrgency tool show me
2018-01-27 17:13:53.320 0001 2 __msg::MSG_ERROR
2018-01-27 17:13:53.336 0000 5 Initialize firehose download service failed
please help

hello guys can any1 tell me whats first one and third one says ? mıddle one is recovery tht ı understand.

Any software for Z5s series?

btruong said:
after 1 day, i unbrick succeessfuly z17 mini. Now i am happy to see it alive .
Click to expand...
Click to collapse
can you guide me how to solve ?
mine is stuck in boot logo

EmreGze said:
Here is a link for people who can't access baidu:
This link expires in 4 weeks (Free account sorry)
Click to expand...
Click to collapse
Hello, good morning, I could not download for Baidu or the link that you put because it is unavailable. You could send me the file or the link again. Thank you.

I upload for you
Nubia emergency Tool V1.1.4: https://www.up-4ever.com/io2mab10hl1v

Creating my own AP combination file. Samsung password.

Hi, folks! I'm new here.
My SM-G955F is FRP ON and I can't solve this problem without Odin.
I was trying to create my own combination file since the ones I find online are too old. My binary (if I know what I'm talking about) is 12 and the one that I can find online is 6 or 7.
When I rename the .md5 files to .zip and try to unpack, winrar asks me for the password.
Is there any chance for anyone to have this password?
Thanks a lot.

Overloadman said:
Hi, folks! I'm new here.
My SM-G955F is FRP ON and I can't solve this problem without Odin.
I was trying to create my own combination file since the ones I find online are too old. My binary (if I know what I'm talking about) is 12 and the one that I can find online is 6 or 7.
When I rename the .md5 files to .zip and try to unpack, winrar asks me for the password.
Is there any chance for anyone to have this password?
Thanks a lot.
Click to expand...
Click to collapse
There's no password, and you don't need to change the extension to zip. Use 7zip to open the .tar.md5

V0latyle said:
There's no password, and you don't need to change the extension to zip. Use 7zip to open the .tar.md5
Click to expand...
Click to collapse
Thanks a million, amigo!

V0latyle said:
There's no password, and you don't need to change the extension to zip. Use 7zip to open the .tar.md5
Click to expand...
Click to collapse
I'm sorry to ask you about it, but I've created the file with the instructions from this site: https://technastic.com/remove-frp-samsung-combination-file/, but the FRP is still on, did I do something wrong? Thanks again.