Related
Q&A for [ROM] UltraPOP [ZVG] [05-07-2015] [Ver 1.0]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] UltraPOP [ZVG] [05-07-2015] [Ver 1.0]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
tpike1296 said:
So, first I'll quickly detail how I upgraded. Coming from Blisspop, I ran Autorec for Lollipop (linked in OP), rebooted to recovery, wiped flashed the ZVG radios (linked in OP), flashed the rom, and it was good to go. No tot back to stock required for me (YMMV).
Click to expand...
Click to collapse
I did the exact same thing to my ls980 coming from Blisspop 2.3 and it just looped at the LG boot logo. Then I flashed the kernel to see if that would work and now I can't even get the lg flash tool to see my phone in download mode! I can't even flash back to stock! Before that I tried to restore my my twrp backups but none of them are working now. Kinda pissed, not blaming anybody. I just wish sometimes things weren't explained in such a bleak manner. The more specifications the better. In other words, depending on which version of Blisspop and what phone model you're using....this might now work for everybody.
Deeshizzle said:
I did the exact same thing to my ls980 coming from Blisspop 2.3 and it just looped at the LG boot logo. Then I flashed the kernel to see if that would work and now I can't even get the lg flash tool to see my phone in download mode! I can't even flash back to stock! Before that I tried to restore my my twrp backups but none of them are working now. Kinda pissed, not blaming anybody. I just wish sometimes things weren't explained in such a bleak manner. The more specifications the better. In other words, depending on which version of Blisspop and what phone model you're using....this might now work for everybody.
Click to expand...
Click to collapse
Last I saw the lollipop auto-rec was named "ls980_best_version_omg_so_good"
If you didn't flash that version. You will be in a heap of trouble.
And the icon has a picture of a lollipop with "ARec" written in it.
Deeshizzle said:
I did the exact same thing to my ls980 coming from Blisspop 2.3 and it just looped at the LG boot logo. Then I flashed the kernel to see if that would work and now I can't even get the lg flash tool to see my phone in download mode! I can't even flash back to stock! Before that I tried to restore my my twrp backups but none of them are working now. Kinda pissed, not blaming anybody. I just wish sometimes things weren't explained in such a bleak manner. The more specifications the better. In other words, depending on which version of Blisspop and what phone model you're using....this might now work for everybody.
Click to expand...
Click to collapse
secret.animal said:
Last I saw the lollipop auto-rec was named "ls980_best_version_omg_so_good"
If you didn't flash that version. You will be in a heap of trouble.
And the icon has a picture of a lollipop with "ARec" written in it.
Click to expand...
Click to collapse
I just uploaded a boot partitions upgrad/fix coming from ANY version of ROM or Firmware. for testing You must have a LGD panel (Not JDI) to use. See second post in UltraROM for details.
secret.animal said:
Last I saw the lollipop auto-rec was named "ls980_best_version_omg_so_good"
If you didn't flash that version. You will be in a heap of trouble.
And the icon has a picture of a lollipop with "ARec" written in it.
Click to expand...
Click to collapse
Agimax said:
I just uploaded a boot partitions upgrad/fix coming from ANY version of ROM or Firmware. for testing You must have a LGD panel (Not JDI) to use. See second post in UltraROM for details.
Click to expand...
Click to collapse
It's all good on my end. For some reason the laptop that I only use for flashing my phone to stock was set to the wrong com port. I flashed to stock, upgraded to ZVG, rooted, used AutoRec Lollipop, wiped everything except internal memory, flashed the rom, waited a little bit for the LG logo to disappear and everything has been smooth ever since. It's a nice, minimalistic, clean rom. Indeed worth the trouble, good work. One question? How can I get a menu button in the navigation bar in this rom? Is it there and I just can't find it?
Good job, man.
I'm waiting for unlock sim version
Im come from asian and use LS980
Lg ls890 zve
how to TOT ZVE on LG LS980..
please guide step by step
my phone is rooted and i am on stock zvc with twrp recovery...
need ur help
Hi, im waiting for unlock sim version.
I live in Vietnam and use LS980
Can i know when that version is available please?
And, your ROM is awesome. I like it when i see the first picture
Farhan Ashraf said:
how to TOT ZVE on LG LS980..
please guide step by step
my phone is rooted and i am on stock zvc with twrp recovery...
need ur help
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=50504446
Fix wifi hotspot issue
https://www.youtube.com/watch?v=e8ENfODL4Ss
unable to play videos its says cant play video on Gallery
VVM can't update
i installed the zip for the VVM and now it says there is an update, i click download and it just clocks trying to download.
Is this expected or a bug?
Thanks
Hi guys. I see that someone writes here that WiFi tethering should work in this ROM but I don't even have WiFi tethering item in my settings. Should I enable it somehow? May be it is related to my network type (CDMA)? How can I have it working? Would be grateful for any advice.
Help
Sorry, I'm fairly new with rooting and putting roms on my device so I need some assistance if possible. I current have the Sprint LG G2 device currently running cloudy 3g 2.1 prior to the Lollipop update. I was wondering if someone can do a video or walk me through returning it to official so I can OTA update to Lollipop and then get the rom ultrapop 1.2. Sorry to bother everyone just a noob here trying to learn on how to become more efficient on changing and updating roms.
Thank you,
Jose
tjose619 said:
Sorry, I'm fairly new with rooting and putting roms on my device so I need some assistance if possible. I current have the Sprint LG G2 device currently running cloudy 3g 2.1 prior to the Lollipop update. I was wondering if someone can do a video or walk me through returning it to official so I can OTA update to Lollipop and then get the rom ultrapop 1.2. Sorry to bother everyone just a noob here trying to learn on how to become more efficient on changing and updating roms.
Thank you,
Jose
Click to expand...
Click to collapse
First question, did you put the phone to cloudy 3g 2.1? It did you buy it that way?
Which service provider or carrier are you on? Sprint or someone else?
These are important as stock will only allow sprint to work.
secret.animal said:
First question, did you put the phone to cloudy 3g 2.1? It did you buy it that way?
Which service provider or carrier are you on? Sprint or someone else?
These are important as stock will only allow sprint to work.
Click to expand...
Click to collapse
Yes I put it and yes I'm on sprint.
tjose619 said:
Yes I put it and yes I'm on sprint.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=45293512
Use the appropriate one for sprint. Take the ota, root via the one click method that is in "Sprint Android development".
http://forum.xda-developers.com/showthread.php?p=60393860
Use the auto-rec lollipop from here
http://androidforums.com/threads/lg-g2-autorec-twrp-on-lollipop-stock-rooted.917299/
Then flash rom.
tjose619 said:
Yes I put it and yes I'm on sprint.
Click to expand...
Click to collapse
Will we have The Dorimanx kernel soon?
I've seen he wants to add it but hasn't yet. The Lollipop Dorimanx is out, but no new version with it. Will we see it anytime soon?
ThatOneGuy67 said:
I've seen he wants to add it but hasn't yet. The Lollipop Dorimanx is out, but no new version with it. Will we see it anytime soon?
Click to expand...
Click to collapse
Currently, there are issues with the Kernel, I am following the progress closely.
Agimax said:
Currently, there are issues with the Kernel, I am following the progress closely.
Click to expand...
Click to collapse
Also, can you bring back the original task manager into the ROM? I miss having the app built in. And I'm having problems with video playback when I record something.
Stock ROM Elephone P90000_Android_6.0_20160401 (Beta)
Download - https://mega.nz/#!w4BBnKaR!_WU3BeucmEURhgo8VpvspHMVZngL7ctzd29mx6cn2BQ
XDA:DevDB Information
[ROM] Stock ROM Elephone P9000_Android_6.0_20160401_Beta, ROM for the Elephone P9000
Contributors
Jonny
ROM OS Version: 6.0.x Marshmallow
Based On: AOSP
Version Information
Status: Beta
Current Beta Version: 20160401
Beta Release Date: 2016-04-04
Created 2016-04-19
Last Updated 2016-04-19
Has someone give this Beta a try?
Trying now, just be aware that flashing WILL completely wipe your phone again... Everything is gone...
Seriously though, how hard is it to NOT wipe everything like, oh i don't know, every other phone out there...
There is not much difference between this and the last OTA update, I have found the fingerprint sensor a little better but even the security patch level says 1 March 2016... Can't say anything about battery life yet, I find it usually takes 3 days for that to settle but I really haven't seen much difference in UI or settings. Most changes must be "under the hood" so to speak... Doesn't help there's no changelog...
Found the case doesn't seem to register being closed easily so it just leaves the phone on even though I have the original case that has the screen cutout for clock and whatnot.
Keyboard still doesn't support swype...
ultramag69 said:
Trying now, just be aware that flashing WILL completely wipe your phone again... Everything is gone...
Seriously though, how hard is it to NOT wipe everything like, oh i don't know, every other phone out there...
There is not much difference between this and the last OTA update, I have found the fingerprint sensor a little better but even the security patch level says 1 March 2016... Can't say anything about battery life yet, I find it usually takes 3 days for that to settle but I really haven't seen much difference in UI or settings. Most changes must be "under the hood" so to speak... Doesn't help there's no changelog...
Found the case doesn't seem to register being closed easily so it just leaves the phone on even though I have the original case that has the screen cutout for clock and whatnot.
Keyboard still doesn't support swype...
Click to expand...
Click to collapse
Untick the userdata.img if you don't want your data to be wiped.
racer290 said:
Has someone give this Beta a try?
Click to expand...
Click to collapse
Been running this for a number of days now, not run into any problems except it was slightly more difficult to root, lot of trial and error but I'm going to post a tutorial on how I rooted it later today.
Jonny said:
Been running this for a number of days now, not run into any problems except it was slightly more difficult to root, lot of trial and error but I'm going to post a tutorial on how I rooted it later today.
Click to expand...
Click to collapse
Correction, someone has already posted the method here >>> http://forum.xda-developers.com/elephone-p9000/how-to/how-to-root-elephone-9000-stock-rom-t3359315
The tutorial in the link above works for this firmware version as well.... could have saved myself a lot of time if I'd read that first lol. For convenience I've put all the files needed in a zip file (link below). Just use SP Flash Tool to flash the recovery, then flash the 2 other zip files from TWRP
ZIP File >>> https://mega.nz/#!IlgxgDhS!r6_OpFYLVv07o025ecJ9rDul2db1KMsoWAlZbabWMxI
trying to flash this but SPTools (5.1520.00) giving me "Error: Initializing scatter file failed. Please check the name of the scatter file which you load is legal" any ideas as to why? I have tried the other rom listed that isn't the BETA and get the same error...
Also, I don't appear to have the Allinone.bin file for the DownloadAgent, can someone please share that too me?
Thanks
Ignore that, I seem to have got it working.
Where do you get these ROMS from? I'm looking for rom version 20160318 for the p9000 lite.
karl0ss said:
trying to flash this but SPTools (5.1520.00) giving me "Error: Initializing scatter file failed. Please check the name of the scatter file which you load is legal" any ideas as to why? I have tried the other rom listed that isn't the BETA and get the same error...
Also, I don't appear to have the Allinone.bin file for the DownloadAgent, can someone please share that too me?
Thanks
Ignore that, I seem to have got it working.
Click to expand...
Click to collapse
use ever latest sp flashtool!
5.1604 or newer for Android 6 and P10 chipset
megthebest said:
use ever latest sp flashtool!
5.1604 or newer for Android 6 and P10 chipset
Click to expand...
Click to collapse
I could only get 5.1604 working, 5.1612 wouldn't work for me at all on Windows 10 in VirtualBox.
This is officiel or not ? and GPS work for you on this rom ? is it based on 20160315 ?
Bradco said:
This is officiel or not ? and GPS work for you on this rom ? is it based on 20160315 ?
Click to expand...
Click to collapse
please read.. is not based on 20160315 .. is a new stock rom 1st of April.. but still in beta stage..
I hear about a new OTA here http://forum.xda-developers.com/elephone-p9000/help/ota-update20160319-t3364691
megthebest said:
please read.. is not based on 20160315 .. is a new stock rom 1st of April.. but still in beta stage..
I hear about a new OTA here http://forum.xda-developers.com/elephone-p9000/help/ota-update20160319-t3364691
Click to expand...
Click to collapse
Ok thanks
All developments are carried out thanks to donations on Purchase of these or other devices
thank
Please do not copy files to other file shares
the project is under constant development and refinement
Project name Moto X Force L!te NPK25.200-12
Tagline Faster Lighter Economical
NPK25.200-12.zip
XT1581 CN / XT1580 EU / XT1580 MX / XT1580 LA
Installing via TWRP on any device in "1 click" (one zip archive "NPK25.200-12.zip") in the process will automatically update the logo, radio, kernel, and install the system
Hands will need to do only Wipe data / cache / dalvik | art
Description
- lighter, faster
- deodex - allowing resources using modifiers
- delete more apps Google & Moto Services OTA/CCC/CCE
- OTA process is deleted, you will not receive a brick
- removed a lot of the background services collect and send data on the type of phone DropBox, MotoCare, MotoConntect, Drive ... etc.
- automatic updating of build.prop for your model phone
- automatic updating of fsg
- automatic updating of the modem is adapted for 2 sim cards on any phone except the verizon
- logo & bootanimation 5.1.1 MotoPlanet
- widget form Droid Turbo 2 v2.1.2
Install
IMPORTANT on the phone, copy 2 files NPK25.200-12.zip and NPK25.200-12.zip.md5 to it, it will save you from the problem of installing a broken archive, if the archive does not match then it will not install
- Root not PreInstalled
- wipe Dalvik/ART
- wipe Data
- wipe Cache
- wipe System
- copy NPK25.200-12.zip and NPK25.200-12.zip.md5 to phone
- install NPK25.200-12.zip
- reboot & use
- 1 $ Coffee for me
Download
Please do not copy files to other file shares
the project is under constant development and refinement
Download Moto X Force L!te Android 7.0 NPK25.200-12
XDA:DevDB Information
ROM Moto X Force L!te Android 7.0 NPK25.200-12, ROM for Moto X Force all model
Contributors
CrashXXL
ROM OS Version: 7.x Nougat
Based On: KINZIE_RETMX_DS_7.0_NPK25.200-12_cid12_subsidy-DEFAULT_CFC.xml
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2017-06-26
Current Beta Version: 0.1
Beta Release Date: 2017-06-25
Created 2017-06-26
Last Updated 2017-06-26
Please do not copy files to other file shares
the project is under constant development and refinement
You've done amazing work thank you, I can confirm that everything runs as it supposed to! Do you know if any future downgrade to marshmallow would only require flashing ROM or flashing modem (EU) etc would also be required?
Installation works as expected
Just want to let you know every thing works as expected XT1580 |EU.
Wil test a few days en come back. Big Thanks1
bertrob said:
You've done amazing work thank you, I can confirm that everything runs as it supposed to! Do you know if any future downgrade to marshmallow would only require flashing ROM or flashing modem (EU) etc would also be required?
Click to expand...
Click to collapse
If you yourself did not flush the full flush
Then downgrade the stock firmware can be, if you are stitching into the phone of someone else's GPT and bootloader, you can not do this
(c) GoogleTranslate
I guy, thanks for your work! This evening I try it on my XT1581.
Only one question. Now I use Unofficial Lineage Os and second SIM remain in 2G. In your Rom both SIM works in 4G?
lessiohc said:
I guy, thanks for your work! This evening I try it on my XT1581.
Only one question. Now I use Unofficial Lineage Os and second SIM remain in 2G. In your Rom both SIM works in 4G?
Click to expand...
Click to collapse
i don't know
I make the firmware for phones that I sometimes get, but I can not use them everyday
My main phone moto maxx xt1225
Judging from your screenshots, there isn't a baseband/modem update with the nougat rom. Can somebody please confirm? Thanks!
JaleBreak said:
Judging from your screenshots, there isn't a baseband/modem update with the nougat rom. Can somebody please confirm? Thanks!
Click to expand...
Click to collapse
modem android 7.0
fsg android 7.0
BT not udpated
version in 5.1.1 M8994_12553306.05.02.10R
version in 7.0 M8994_1255341.44.01.95.01R
Unfortunately almost every app I install crashes or freezes. Some work but most don't . Good job otherwise though
Thx for the excellent work @CrashXXL :good::good:
Installed without any problems and ROM works great and smooth inclusive Magisk v13.0 (54e6a79)!!
CrashXXL said:
modem android 7.0
fsg android 7.0
BT not udpated
version in 5.1.1 M8994_12553306.05.02.10R
version in 7.0 M8994_1255341.44.01.95.01R
Click to expand...
Click to collapse
Ok, thanks. Radio appears to be the same as in latest Marshmallow ROM.
I flashed yesterday and I have some problem with play store, that crashed or not installing app (waiting and nothing moves...)
After some wipe and four or five flash play store works good and all of rom doesn't have a problem. Good Job!
XT1581 CN with Italian dual SIM ✌?
I think that version 7.0 has a bug, when downloading a large file and the screen goes off the download is stopped, even with the configuration of wifi always active.
Install this firmware also brings the same problem. The failure of the version that I release Motorola.
Thank you for your work.
Luis R said:
I think that version 7.0 has a bug, when downloading a large file and the screen goes off the download is stopped, even with the configuration of wifi always active.
Install this firmware also brings the same problem. The failure of the version that I release Motorola.
Thank you for your work.
Click to expand...
Click to collapse
Have you checked your cellular network signal quality under battery graph? Because I noticed a bug that after screen goes off, cellular signal goes really bad (orange/red). After turning screen on it changes back to green immediately. Dunno if it's related to your problem but for me it causes bad battery drain.
it doesn't support China Telecom on XT1581.
Would this work on X force India xt1580 model how about the radio mine is a single SIM would it unlock dual SIM thanks
1580 works perfectly in EU.
Awesome! Thanks man!!
XT1580 (official, russian) is now double sim. Though it does not show IMEI of second slot, but automagically both sims work perfectly.
Answering the question about second sim being limited to 2G only - it is for voice communication only. Once the data transfer is switched to sim2, it reverts the things in an opposite way - sim2 becomes LTE-capable and sim1 drops down to 2G only.
The only issue now is that bootloader cannot be locked due to unofficialness of the firmware. It seems checking the signature or something...
This is only a problem for Android Pay. Not a big deal for me though, as native bank client work better, anyway.
And yet another piece of excellent news - ACR is now working fine even with bluetooth headset and does perfect calls recordings!
Man you're great! Now my XT1580 is most loved headset in the world, again!
Thank you veeeeeery much for your effort!
ziatnine said:
Awesome! Thanks man!!
....
The only issue now is that bootloader cannot be locked due to unofficialness of the firmware. It seems checking the signature or something...
This is only a problem for Android Pay. Not a big deal for me though, as native bank client work better, anyway.....
Thank you veeeeeery much for your effort!
Click to expand...
Click to collapse
Hi, flash Magisk v13-54e6a79 (incl. saftynet-fix) and your BL will pass SaftyNet & your device will be rooted too!
nicorvienne said:
Hi, flash Magisk v13-54e6a79 (incl. saftynet-fix) and your BL will pass SaftyNet & your device will be rooted too!
Click to expand...
Click to collapse
thanks for the idea
though after voice recording is already working, I don't see where would I need a root :
to me it makes more risk than profit...
On request, to easier find this, im creating this thread
For all the H932 users out there, who also want to use ROMs that dont provide support for it, but only for the H930, heres a little zip for you, which will allow you to fully use H930 ROMs on your H932.
What this zip does:
Replaces the necessary firmware files (list here (H930 tree, because the H932s list is somehow empty... gotta fix that later)) which are the only (important) difference.
This wont change the device fingerprint from H930 to H932 (maybe in a later version, who knows)
This is also ONLY intented for AOSP ROMs (LOS, RR, whatever else we have), do NOT use this on Stock based ROMs
How to use it:
1) Flash H930 ROM on your H932
2) Flash this zip
3) boot the system
This is NOT for H930/US998/and so on users!
XDA:DevDB Information
H932 Firmware zip, Tool/Utility for the LG V30
Contributors
SGCMarkus
Version Information
Status: Stable
Created 2019-08-16
Last Updated 2019-08-16
Thanks! Just added to the Root Sticky post.
Suggestion: all the ROM devs should add prominent link to this thread to their OP (post #1) of their ROM threads. It would only increase their ROM usage, as T-mobile H932 users think they don't have many choices!
ChazzMatt said:
Thanks! Just added to the Root Sticky post.
Suggestion: all the ROM devs should add prominent link to this thread to their OP (post #1) of their ROM threads. It would only increase their ROM usage, as T-mobile H932 users think they don't have many choices!
Click to expand...
Click to collapse
Thanks a lot for the zip Markus ?
Guys please add the link to your ROM pages.
@kherio @BADA 187 @Mrxyzl @luffy1105
@Blackmanta @Ab.Shaheen
Thx for your work!:good:
i'd like to try on stock... but kinda scary
immns said:
i'd like to try on stock... but kinda scary
Click to expand...
Click to collapse
It clearly says don't try on stock. So don't
immns said:
i'd like to try on stock... but kinda scary
Click to expand...
Click to collapse
This is ONLY for AOSP/Lineage custom ROMs, so T-Mobile H932 can boot them. Is the op not clear?
Post #2 screenshot is pretty clear.
Thanks for yours hard work. Have more choices to choose now..,?
Has anyone used on LiquidRemix rom for H930 and installed the rom on Tmo H932? Thanks.
thank you for thread (and link to thread) as it clears alot of confusion.
im still weary of using ROMs that werent "built" with h932 foundation for a number of reasons, but may give a few of the AOSP ROMs a shot if i cant find a decent debloated stock.
letthebeatrock said:
thank you for thread (and link to thread) as it clears alot of confusion.
im still weary of using ROMs that werent "built" with h932 foundation for a number of reasons, but may give a few of the AOSP ROMs a shot if i cant find a decent debloated stock.
Click to expand...
Click to collapse
XenonHD and this zip will work
HueyT said:
XenonHD and this zip will work
Click to expand...
Click to collapse
Tried it. And a bunch of pie based AOSP ROMs on rooted h932. They all boot fine but the modem bootstack doesn't match up. You won't get Wi-Fi on any pie ROM with h932 at the moment
I Tried to Update But Cant Possible.
Any One How to update LG V30 AS998?
Plz Tell Me I am New in Community
waseemrehmat said:
I Tried to Update But Cant Possible.
Any One How to update LG V30 AS998?
Plz Tell Me I am New in Community
Click to expand...
Click to collapse
Why are you posting in this thread? It's for T-mobile H932 and you say you have AS998.
ChazzMatt said:
Why are you posting in this thread? It's for T-mobile H932 and you say you have AS998.
Click to expand...
Click to collapse
So I Want Yo Know How. I Update My AS998
waseemrehmat said:
So I Want Yo Know How. I Update My AS998
Click to expand...
Click to collapse
Well, you need to ask in relevant threads. Or start a new thread in the Questions section. I see you finally posted in Frankenstein, which is helpful for what you need. I answered your question there.
In forums like this, people don't want irrelevant questions clogging their threads. This is a thread for T-Mobile H932 only and they couldn't care less about AS998.
letthebeatrock said:
Tried it. And a bunch of pie based AOSP ROMs on rooted h932. They all boot fine but the modem bootstack doesn't match up. You won't get Wi-Fi on any pie ROM with h932 at the moment
Click to expand...
Click to collapse
Can you clarify what you mean with this? I used RR and this converter and wifi worked fine. Similarly I've used for a long time the Lineage specific H932 build and I also get wifi. However in my region (Norway) I get an "x" on the LTE, HSPDA, 3G (any bands really) signal bars that comes and goes. Sometimes data works - especially when connected to a VPN, but I've had no issue in any other country, just this one and I wonder if the 2 are related. Or am I clutching at straws? I had to give up on my H932 and go back to my old iphone (bluurgh) because I don't know what the issue is and I can't be working with unreliable data.
letthebeatrock said:
Tried it. And a bunch of pie based AOSP ROMs on rooted h932. They all boot fine but the modem bootstack doesn't match up. You won't get Wi-Fi on any pie ROM with h932 at the moment
Click to expand...
Click to collapse
This literally does the same (relevant) changes to the ROM as when you would build H932 ROMs (the only difference are the few firmware files and the device fingerprint (unimportant))... so whatever issue you have, its not related to this
ddevey said:
Can you clarify what you mean with this? I used RR and this converter and wifi worked fine. Similarly I've used for a long time the Lineage specific H932 build and I also get wifi. However in my region (Norway) I get an "x" on the LTE, HSPDA, 3G (any bands really) signal bars that comes and goes. Sometimes data works - especially when connected to a VPN, but I've had no issue in any other country, just this one and I wonder if the 2 are related. Or am I clutching at straws? I had to give up on my H932 and go back to my old iphone (bluurgh) because I don't know what the issue is and I can't be working with unreliable data.
Click to expand...
Click to collapse
SGCMarkus said:
This literally does the same (relevant) changes to the ROM as when you would build H932 ROMs (the only difference are the few firmware files and the device fingerprint (unimportant))... so whatever issue you have, its not related to this
Click to expand...
Click to collapse
I honestly couldnt explain it any further than what I did
HOWEVER.
I decided to flash the LP ROM again, then the H930 to H932 converter, flash Magisk, and THEN the 20s Modem from a another topic and all my WiFi issues were cleared up.
so yes, in my particular case, I had to flash the ROM, and then the Modem in order to get Wi-Fi to work
Updated with the pie blobs from H932 30d. Zip is attached in the OP.
Does the same as for oreo, just with pie blobs and their location, so you shouldnt have any issues.
Initial topic - https://forum.xda-developers.com/lg-v40/development/android-10-0-0-lineageos-17-0-v40-t3970119
So far I am only doing compilation without testing the result.
Download:
LOS-17.1
Latest build: lineage-17.1-20200304-UNOFFICIAL-judypn
lineage-17.1-20210304-UNOFFICIAL-judypn.zip
drive.google.com
Prev.:lineage-17.1-20201118-UNOFFICIAL-judypn
https://drive.google.com/drive/folders/1QT_yRNtydEZmplZvl5oSq1xiySv53NK9?usp=sharing
LOS-18.0
Latest build: lineage-18.0-20201126-UNOFFICIAL-judypn
https://drive.google.com/drive/folders/17d7f1QdUoljNnU00VRJYC776KhAwIq4R?usp=sharing
Contributors
xenius9, SGCMarkus
Many thanks to SGCMarkus for the sources.
xenius9 said:
Initial topic - https://forum.xda-developers.com/lg-v40/development/android-10-0-0-lineageos-17-0-v40-t3970119
So far I am only doing compilation without testing the result.
Click to expand...
Click to collapse
Is LOS 18.0 "Pre Alpha or Alpha" suitable for daily use?
Haven't noticed exact description what works and what are the current bugs.....
xenius9 said:
Initial topic - https://forum.xda-developers.com/lg-v40/development/android-10-0-0-lineageos-17-0-v40-t3970119
So far I am only doing compilation without testing the result.
Download:
LOS-17.1
Latest build: lineage-17.1-20201118-UNOFFICIAL-judypn
https://drive.google.com/drive/folders/1QT_yRNtydEZmplZvl5oSq1xiySv53NK9?usp=sharing
LOS-18.0
Latest build: lineage-18.0-20201126-UNOFFICIAL-judypn
https://drive.google.com/drive/folders/17d7f1QdUoljNnU00VRJYC776KhAwIq4R?usp=sharing
Contributors
xenius9, SGCMarkus
Many thanks to SGCMarkus for the sources.
Click to expand...
Click to collapse
Do you think most of the bugs will be cleared out by the end of the year? Also, which kdz should I use if I want band 71 support?
camray00 said:
Do you think most of the bugs will be cleared out by the end of the year? Also, which kdz should I use if I want band 71 support?
Click to expand...
Click to collapse
I don't know anything about the bugs, but for b71 2 of the roms have it; US OP Pie (no Q yet) and KR OP which is Korean Open (Q version available) has b71 also.
cheers
AsItLies said:
I don't know anything about the bugs, but for b71 2 of the roms have it; US OP Pie (no Q yet) and KR OP which is Korean Open (Q version available) has b71 also.
cheers
Click to expand...
Click to collapse
I was thinking it might be possible to grab the modem partition from sprint or unlocked pie and write them over before installing this ROM. Would that work, or would it be incompatible?
camray00 said:
I was thinking it might be possible to grab the modem partition from sprint or unlocked pie and write them over before installing this ROM. Would that work, or would it be incompatible?
Click to expand...
Click to collapse
I'm not sure, have not tried that. I've read others suggesting the same thing but don't know if they've had success with it. I'd bet it wouldn't as there are so many threads, in various model phones, about which rom supports which bands. If that problem could be resolved by simply using the modem partition from a diff rom, it happening would almost certainly be common knowledge and many threads with various modem partitions available, but there aren't.
AsItLies said:
I'm not sure, have not tried that. I've read others suggesting the same thing but don't know if they've had success with it. I'd bet it wouldn't as there are so many threads, in various model phones, about which rom supports which bands. If that problem could be resolved by simply using the modem partition from a diff rom, it happening would almost certainly be common knowledge and many threads with various modem partitions available, but there aren't.
Click to expand...
Click to collapse
Ended up trying it and it prevents boot to system and recovery. I replaced all 4. modemst1,modemst2,modem_a,modem_b
I think we'll have to wait for them to make Q for v405qa unlocked.
I used v405ebw with lineage 18. VoLTE and VoWiFi aren't supported, which basically makes Mint Mobile unusable except for data.
camray00 said:
Ended up trying it and it prevents boot to system and recovery. I replaced all 4. modemst1,modemst2,modem_a,modem_b
I think we'll have to wait for them to make Q for v405qa unlocked.
I used v405ebw with lineage 18. VoLTE and VoWiFi aren't supported, which basically makes Mint Mobile unusable except for data.
Click to expand...
Click to collapse
I'd suggest another option, as 405qa Q arrival is ???, use the korean open 30e. That's what I have. One mod makes it quite workable; copy the US Open /OP partition (from Pie) and use it instead of the KR Open partition. Everything works, including vowifi and volte. And it does get b71. There's only 1 other small change needed to get vowifi to work.
It's very solid and haven't had any trouble with it at all. Something to consider.
I just found out that a great deal of work can be done with Cellular Support via the Qualcomm PDC tool.
AsItLies said:
I'd suggest another option, as 405qa Q arrival is ???, use the korean open 30e. That's what I have. One mod makes it quite workable; copy the US Open /OP partition (from Pie) and use it instead of the KR Open partition. Everything works, including vowifi and volte. And it does get b71. There's only 1 other small change needed to get vowifi to work.
It's very solid and haven't had any trouble with it at all. Something to consider.
Click to expand...
Click to collapse
Can you link the Korean open download? Also, what is the small change for VoWiFi?
Yes it's on this link. It's at the top of the list, the KR Open, 30e is the last one in the beginning section.
The other change is minor, have to enter the service menu with the dial code and it's one of the SVC (iirc) fields you have to enable vowifi. I can find it if you decide to do it.
There's a little 'trick' u need to do when cross flashing, to avoid the 'NT_Error' thing when u first boot up. It doesn't cause a problem, it's just annoying. Just after doing a partition DL of the rom, let it boot of course, to finish. Then shut it off, don't touch anything. Then use LG up and do a refurbish with same rom. No more nt-error code thing.
Also, even though the firmware page (above) doesn't indicate it, that rom does have b71. I have a screen shot of the phone using lte discovery connected to b71 on that rom. It's there.
AsItLies said:
Also, even though the firmware page (above) doesn't indicate it, that rom does have b71. I have a screen shot of the phone using lte discovery connected to b71 on that rom. It's there.
Click to expand...
Click to collapse
I'm trying to boot TWRP. When I run
Code:
fastboot boot judypn_TWRP_bootable-metadata.img
it reads out this:
Code:
downloading 'boot.img'...
OKAY [ 0.942s]
booting...
FAILED (remote: unknown command)
finished. total time: 0.946s
This is after flashing the Korean Open version. I'm not sure what to do. I made sure USB Debugging was on and changed the driver to the official LGE one, but no luck.
I tried everything on google. Still no luck.
camray00 said:
I tried everything on google. Still no luck.
Click to expand...
Click to collapse
Hi, so we've hijacked this thread long enough, let's move this over to this thread which is kor open specific.
Sorry about the hijack xenius.
Please help me. My LG v40ua is switched into los-18.0 and recovery is also los-18.0. Now I want to change back to the previous system, but I can't do it without root. Please tell me what to do, thank you
And my phone can't enter FastBoot mode
xenius9 said:
Initial topic - https://forum.xda-developers.com/lg-v40/development/android-10-0-0-lineageos-17-0-v40-t3970119
So far I am only doing compilation without testing the result.
Download:
LOS-17.1
Latest build: lineage-17.1-20201118-UNOFFICIAL-judypn
https://drive.google.com/drive/folders/1QT_yRNtydEZmplZvl5oSq1xiySv53NK9?usp=sharing
LOS-18.0
Latest build: lineage-18.0-20201126-UNOFFICIAL-judypn
https://drive.google.com/drive/folders/17d7f1QdUoljNnU00VRJYC776KhAwIq4R?usp=sharing
Contributors
xenius9, SGCMarkus
Many thanks to SGCMarkus for the sources.
Click to expand...
Click to collapse
Thank you for your work, @xenius9 - спасибо большое. Using lineage-17.1-20201118-UNOFFICIAL-judypn on Sprint LM-V405UA for about a month without problems.
praiseeee said:
Please help me. My LG v40ua is switched into los-18.0 and recovery is also los-18.0. Now I want to change back to the previous system, but I can't do it without root. Please tell me what to do, thank you
And my phone can't enter FastBoot mode
Click to expand...
Click to collapse
You should get fastboot working via 9008 guide (I suggest not to wipe lafs on both slots), then fastboot TWRP.
praiseeee said:
Please help me. My LG v40ua is switched into los-18.0 and recovery is also los-18.0. Now I want to change back to the previous system, but I can't do it without root. Please tell me what to do, thank you
And my phone can't enter FastBoot mode
Click to expand...
Click to collapse
If you install this apk (only on los), it will allow you to switch to the other side and reboot recovery. It's hard coded (I changed the original file) to boot to recovery after you select the other slot. Did it for the exact situation you're experiencing.
cheers
LOS 17.1 updated
xenius9 said:
LOS 17.1 updated
Click to expand...
Click to collapse
Is it stable? Good for daily driver? Thanks!
Hello forum!
I have LG LM-V405QA and would like to have a ROM flashed that removes all Google everything. I have flashed ROMs in the past, but have already spent too much time researching with no results. I am in California, USA.
This is a serious inquiry. Please help.
Thank you.