Develop Bugs

[Q&A] [Z1C-D5503]KitSlim_AMG [Evo 9][02/08/2014]The power is nothing without the mas

[Q&A] [Z1C-D5503]KitSlim_AMG [Evo 9][02/08/2014]The power is nothing without the mas
Q&A for [Z1C-D5503]KitSlim_AMG [Evo 9][02/08/2014]The power is nothing without the mastering
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Z1C-D5503]KitSlim_AMG [Evo 9][02/08/2014]The power is nothing without the mastering. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Feature requerst
Hi,
Your rom is very good, but i think, is can to a better if getting to merge into this mod: [YKG] Real Xperia Z3 Super Stereo Sound
I think this sound mod is very-very good, and useful. This add a stereo feature for a loud speaker default (nearly, but better than the default), add a clearer sound quality for headphones, and more..
I think this is can to make a more better EVO 10 version in the future.
Thanks, for the listening, and sorry if my english is not the best

as you guys know, this rom worked perfectly with the 4k mod, it just that z1c phone have poor camera that didnt even look like 20.7mp cam. even the camera is poor when an image is zoom in when compared to others like samsung nexus.
and yes i admit that this is a phone not a camera n its a 2013 phone .
in my case the 4k and timeshift are fully working but the quality isnt near enough as 4k as its should be, mine would say 4k vid can be zoom, crop without any pixelated nor blurry.
in z1c the vid is ridiculously big in size and i would say stock cam is sufficient enough . this rom really really good as far as until today,i just do clean install and until now never had cam freeze, maybe in some phone are having freeze depending on manufacture, again really nice rom for daily use

EriGabu said:
Hi,
Your rom is very good, but i think, is can to a better if getting to merge into this mod: [YKG] Real Xperia Z3 Super Stereo Sound
I think this sound mod is very-very good, and useful. This add a stereo feature for a loud speaker default (nearly, but better than the default), add a clearer sound quality for headphones, and more..
I think this is can to make a more better EVO 10 version in the future.
Thanks, for the listening, and sorry if my english is not the best
Click to expand...
Click to collapse
I think this is a great idea i still have evo5 with pure audio mod flashed and ykg v15 and both the speakers and the headphones sound awesome

Network issues (radio/baseband)
Hi there, I think this rom is awesome however I am having trouble getting anything above 2G. I have tried flashing stock .108 and .157 (latest) basebands without wipe etc and still can't get it to work. I think my variant is UK. Can anyone send me a working radio/baseband file please? I think the files within a stock rom FTF file should be amss_fs_2.sin, amss_fs_1/sin, amss_fsg.sin, and loader.sin. If could extract these files that work and share a link with us that would be great!
UPDATE: Downloading an older ROM where its baseband worked in the past for me http://dl.weeaboo.com/Z1Compact/D5503_14.2.A.1.114_Generic%20UK.ftf however I get signal drops.

cibic89 said:
Hi there, I think this rom is awesome however I am having trouble getting anything above 2G. I have tried flashing stock .108 and .157 (latest) basebands without wipe etc and still can't get it to work. I think my variant is UK. Can anyone send me a working radio/baseband file please? I think the files within a stock rom FTF file should be amss_fs_2.sin, amss_fs_1/sin, amss_fsg.sin, and loader.sin. If could extract these files that work and share a link with us that would be great!
UPDATE: Downloading an older ROM where its baseband worked in the past for me http://dl.weeaboo.com/Z1Compact/D5503_14.2.A.1.114_Generic%20UK.ftf however I get signal drops.
Click to expand...
Click to collapse
There's no point in flashing your phone without wiping data, the difference between the kernels of the different builds will leave you with an unstable or badly performing system.
No one has reoprted no network in the KitSlim thread, that I know of. Most problems arise from a bad install where the instructions were not followed and a full wipe not completed. Wipes between firmware builds are essential because of the reason just mentioned.
If you are keen to get the latest firmware then you should head over to IaguCool' s thread on Xperia Firmware Downloader & Checker. Follow the instructuions there. You will need a copy of Flashtool and it'd be good to read the thread on 'how to' as all the instructions are there, rather than jump to the last page and ask, which is what everybody does.
A fresh wipe with the latest baseband is bound to sort your problems, then if that fixes it you can always make you way back to KitSlim

Didgesteve said:
There's no point in flashing your phone without wiping data, the difference between the kernels of the different builds will leave you with an unstable or badly performing system.
No one has reoprted no network in the KitSlim thread, that I know of. Most problems arise from a bad install where the instructions were not followed and a full wipe not completed. Wipes between firmware builds are essential because of the reason just mentioned.
If you are keen to get the latest firmware then you should head over to IaguCool' s thread on Xperia Firmware Downloader & Checker. Follow the instructuions there. You will need a copy of Flashtool and it'd be good to read the thread on 'how to' as all the instructions are there, rather than jump to the last page and ask, which is what everybody does.
A fresh wipe with the latest baseband is bound to sort your problems, then if that fixes it you can always make you way back to KitSlim
Click to expand...
Click to collapse
I did do a full wipe you see but you are right, after a full reinstall of the stock .108 I was able to get the network back. I was doing it right all along but for some reason when I was about to download network settings my provider (EE) was not listed. Gave them a ring and they sent me the configuration and now it's working better than previously (no signal drop outs). I know very well how to use the Flashtool and where to get it in addition to the stock roms and no I did not just jumped to the last page and ask. There are people out there who exhaust all possibilities before asking for help you know. No one having issues with network you say? Then perhaps you are the one who needs read or should I say search the thread. I will give you a hint, search for terms "radio" and "baseband" and you will all of them with no clearly stated fix. Had this issue in the past with dual recovery and root flash on stock with locked bootloader; exhausted that thread as well!

New Firmware
Hallo,
i get a notification about the new update to .157.
Can i use Evo9 with this Firmeware?

Giesama said:
Hallo,
i get a notification about the new update to .157.
Can i use Evo9 with this Firmeware?
Click to expand...
Click to collapse
No.
Sent from my Z1c running AICP

[quote name="jshotkid" post=57374400]So I have running this rom for about 2 months or so and still loving it ! How ever I have only been able to successfully enter TWRP once and that when i flashed the rom. Volume up when you see the sony logo i thought but it just vibrates and boots up. Ive been running into some bugs like it tells me SU binary needs to be updated but I cant. Also ill be selling my device soon and was wondering if someone could point me in the right direction. So far what ive found is that using the flashool i should flash 14.4.A.0.157 but I am currently on this rom which is 14.4.A.0.108? I just dont want to end up bricking my device.
**TWRP is volume down at boot**
That's still doesn't work for me. Reinstalled the one click dual recovery twice...says successful. I'm lost
Sent from my D5503 using Tapatalk

jshotkid said:
[quote name="jshotkid" post=57374400]So I have running this rom for about 2 months or so and still loving it ! How ever I have only been able to successfully enter TWRP once and that when i flashed the rom. Volume up when you see the sony logo i thought but it just vibrates and boots up. Ive been running into some bugs like it tells me SU binary needs to be updated but I cant. Also ill be selling my device soon and was wondering if someone could point me in the right direction. So far what ive found is that using the flashool i should flash 14.4.A.0.157 but I am currently on this rom which is 14.4.A.0.108? I just dont want to end up bricking my device.
**TWRP is volume down at boot**
That's still doesn't work for me. Reinstalled the one click dual recovery twice...says successful. I'm lost
Sent from my D5503 using Tapatalk
Click to expand...
Click to collapse
Install NDR Utils, that gives you the option to restart into Phils or TWRP.
Flashing .157 via Flashtool is very easy, if done properly (select all the wipe tickboxes, but exclude TA), it will leave you with a blank up to date phone, with none of your data left on it.
Having .108 already on it will not make any difference. Obviously flashing the phone will remove recovery and root.

????
Are there other not abandoned roms acting on a locked bootloader ?

when it will be new version ?

active87 said:
when it will be new version ?
Click to expand...
Click to collapse
No OTAs. There is no need for a new version until they got Lollipop working for Z1c.

nereus456 said:
Are there other not abandoned roms acting on a locked bootloader ?
Click to expand...
Click to collapse
Munjeni rom
Wysłane z mojego D5503 przy użyciu Tapatalka

MultiRom
Hi,
i have found this very genial Mod http://forum.xda-developers.com/sony-xperia-z1-compact/orig-development/mod-multirom-v30x-t3005654.
But i have problems with this mod and your rom. Can u put this rom in your next update?
Thank you

thanks a lot man, but the 2 links are for "original_framework_KitSlim.zip"
sorry, wrong thread...

dj-alejandro34 said:
thanks a lot man, but the 2 links are for "original_framework_KitSlim.zip"
sorry, wrong thread...
Click to expand...
Click to collapse
link changed

Is this thread dead or developer is working on lolipop version of ROM?

Dancerek said:
Is this thread dead or developer is working on lolipop version of ROM?
Click to expand...
Click to collapse
So sad but whenever i try a lp rom i restore my backup of KitSlim_AMG EVO 9.
There are many things i can't stand in android 5.
Damn Google where are the Lockscreenwidgets in Lollipop? :banghead::thumbdown:
Sent from my D5503 using xda premium

[Q&A] [ROM][29-10] SD v 20|3.28.401.7| ANDROID 4.4.4| SD Kernel| SDHub| HK| Xtended

[Q&A] [ROM][29-10] SD v 20|3.28.401.7| ANDROID 4.4.4| SD Kernel| SDHub| HK| Xtended
Q&A for [ROM][29-10] SD v 20|3.28.401.7| ANDROID 4.4.4| SD Kernel| SDHub| HK| Xtended & More
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][29-10] SD v 20|3.28.401.7| ANDROID 4.4.4| SD Kernel| SDHub| HK| Xtended & More. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Little Problem
Had a little problem during the installation on Recovery PhilzTouch 6.57.8.
I think is an Aroma graphical incompatibility, no big problems.
It was like the background of the installer was trasparent so during the configuration in Aroma i was able to see the "console command" on CWM.

ZumerSandro said:
Had a little problem during the installation on Recovery PhilzTouch 6.57.8.
I think is an Aroma graphical incompatibility, no big problems.
It was like the background of the installer was trasparent so during the configuration in Aroma i was able to see the "console command" on CWM.
Click to expand...
Click to collapse
Hi Zumer, im using Philz 6.26.6, that one works well with this rom. Try it

Hi seeing as I have been pointed here I'll repeat the question. I cannot get the wake actions to change from default. I can change them and it says that I am using said function but the action still produces the default function. I am s-off and unlocked on an international version. Have no troubles with this on other roms but prefer to use SD. any ideas or help much appreciated.

cometabro said:
Hi seeing as I have been pointed here I'll repeat the question. I cannot get the wake actions to change from default. I can change them and it says that I am using said function but the action still produces the default function. I am s-off and unlocked on an international version. Have no troubles with this on other roms but prefer to use SD. any ideas or help much appreciated.
Click to expand...
Click to collapse
Using root explorer, go to system /etc/int.d folder, cut and paste in ur sd card, as backup, 99skydragon file, then reboot and try.

Cheers for the reply. So I get to the point of cut and paste and it tells me system is read only. How do I change this. Obviously I'm not too clued up but can follow directions. Thanks

cometabro said:
Cheers for the reply. So I get to the point of cut and paste and it tells me system is read only. How do I change this. Obviously I'm not too clued up but can follow directions. Thanks
Click to expand...
Click to collapse
Look, when u are trying to cut an alert will prompt about permissions and rights, say YES, then cut. Try this time with the 40StW file

So this is what I'm getting. And in the top left of root explorer it says mounted as r/o

cometabro said:
So this is what I'm getting. And in the top left of root explorer it says mounted as r/o
Click to expand...
Click to collapse
Press tab where says R O to R W. I did delete mine without a problem

Cheers for trying to help. Still no luck.maybe I'm blind or just not having a good day.

I haven´t been able to use HTC backup and restore tool after I flash SD v 20 rom.
When installed Rom was not able to restore and now I have FC when try to open the app.

geragar said:
I haven´t been able to use HTC backup and restore tool after I flash SD v 20 rom.
When installed Rom was not able to restore and now I have FC when try to open the app.
Click to expand...
Click to collapse
Will check tomorrow, comparing it with v 19.
If did work on v 19 should work on this one

dragonesdenano said:
Will check tomorrow, comparing it with v 19.
If did work on v 19 should work on this one
Click to expand...
Click to collapse
Sorry, it was my fault. I chose not to install My HTC and that caused the FC. Flash again the ROM and now everything is working great.
Thanks for you work.

geragar said:
Sorry, it was my fault. I chose not to install My HTC and that caused the FC. Flash again the ROM and now everything is working great.
Thanks for you work.
Click to expand...
Click to collapse
Thats great!
Really I never use that feature, what always leave it in the rom cause a lot of user use it!

Firmware
Is it useful to flash the newest firmware 3.28.401.9 (the thingy that includes modem files etc.) before flashing v22? I´m currently on v20 with firmware 3.28.401.6. v20 needed the new firmware, otherwise wifi won´t work, but v22 still running with the old one.. Is it recommended to flash it anyway? Unfortunately it´s a very time-consuming process to do the firmware upgrade..

striker_lt said:
Is it useful to flash the newest firmware 3.28.401.9 (the thingy that includes modem files etc.) before flashing v22? I´m currently on v20 with firmware 3.28.401.6. v20 needed the new firmware, otherwise wifi won´t work, but v22 still running with the old one.. Is it recommended to flash it anyway? Unfortunately it´s a very time-consuming process to do the firmware upgrade..
Click to expand...
Click to collapse
Only if you are facing lots of problems. Im actually on Latest dev edition firmware, not even International, all ok. So i wont update firmware yet

Thanks for the quick reply.
I´ve no problems at all. Battery is great and 3g/LTE recception too. So i´ll wait with firmware update until "L" arrives
Only Problem I noticed is, that I can´t get the Doubletap2Wake / Sweep2Wake funktion work in ExtremeEnergySaving Mode... It vibrates on doubletap/sweep but no wake... :/ Not sure if it´s the rom or my mistake. I´ve enabled the feature in sense mod but it´s only working on ExtendedBatterySaving disabled!
You´re doing great work, Sir!

striker_lt said:
Thanks for the quick reply.
I´ve no problems at all. Battery is great and 3g/LTE recception too. So i´ll wait with firmware update until "L" arrives
Only Problem I noticed is, that I can´t get the Doubletap2Wake / Sweep2Wake funktion work in ExtremeEnergySaving Mode... It vibrates on doubletap/sweep but no wake... :/ Not sure if it´s the rom or my mistake. I´ve enabled the feature in sense mod but it´s only working on ExtendedBatterySaving disabled!
You´re doing great work, Sir!
Click to expand...
Click to collapse
Wake options can be our kernel. Rite now HolyAngel is on Gpe Android L, working on that. Soon will fix it. Meanwhile, i will prepare a new version with an old version of SD kernel till get a new one

Htc One m8 no wifi after intalling custom rom
Guys ive just flashed the latest Skydragon rom to my htc one m8 and now the wifi can't be switched on
Ive updated my firmware to fw_2.22.401.5_no_red_text
The phone is rooted and s-off
Can anyone please advise
Fixed it was the firmware being to old, updated and now im sorted

vwcrod said:
Guys ive just flashed the latest Skydragon rom to my htc one m8 and now the wifi can't be switched on
Ive updated my firmware to fw_2.22.401.5_no_red_text
The phone is rooted and s-off
Can anyone please advise
Fixed it was the firmware being to old, updated and now im sorted
Click to expand...
Click to collapse
Must try firmware 3.xx.xxx.xx
As Rom has Android 4.4.4 same as new firmware

[Q&A] [ROM][CM12.0] Official CM12.0 for LS980

Q&A for [ROM][CM12.0] Official CM12.0 for LS980
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][CM12.0] Official CM12.0 for LS980. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

be_CZAR said:
I get a boot loop when i try to flash this rom, any reason why?
Click to expand...
Click to collapse
Same. I thought it might just be a corrupted download at first, but I've had no luck after multiple attempts.

I tried wiping Dalvik and Cache, and still no luck

be_CZAR said:
I tried wiping Dalvik and Cache, and still no luck
Click to expand...
Click to collapse
Can you get a logcat of it bootlooping? I just dirty flashed from cm11 to cm12 (on the latest nightly) and had no issues. Before I bumped it to official I checked for any issues with clean or dirty upgrades. If you can grab a logcat it'd be most helpful to see where its getting stuck.

Shelnutt2 said:
Can you get a logcat of it bootlooping? I just dirty flashed from cm11 to cm12 (on the latest nightly) and had no issues. Before I bumped it to official I checked for any issues with clean or dirty upgrades. If you can grab a logcat it'd be most helpful to see where its getting stuck.
Click to expand...
Click to collapse
I heard the official build had a bad boot.IMG
Wait for next nightly.

CM 12 on ls980 feedback
Hi are there more people or a link for input how things are going on our device LS980 , just though it would be nice to see what others think and how its going .

jigglemoe said:
Hi are there more people or a link for input how things are going on our device LS980 , just though it would be nice to see what others think and how its going .
Click to expand...
Click to collapse
I would also like to add this question how is the volume and more important to me the headphone volume running on Lollipop , I read somewhere that the volume mods for kitkat wont work with lollipop?

jigglemoe said:
I would also like to add this question how is the volume and more important to me the headphone volume running on Lollipop , I read somewhere that the volume mods for kitkat wont work with lollipop?
Click to expand...
Click to collapse
There is a viperlolli that works. Try using that.

secret.animal said:
There is a viperlolli that works. Try using that.
Click to expand...
Click to collapse
Thanks ! I cant believe after all the searching i never found Viper mod I have two separate mods now for kitkat that boost one for headphones and the other speaker but viper looks like one more reason for me to check out lollipop on this phone .

anyone know what radio is required?
i had zve bump'd everything, then installed autorec and ran it. so now what radio should i need?
Thanks.

riggsandroid said:
anyone know what radio is required?
i had zve bump'd everything, then installed autorec and ran it. so now what radio should i need?
Thanks.
Click to expand...
Click to collapse
Zv8 radio

How do I go about backing up my modem/efs? Just want make sure I cover all my bases

Juls317 said:
How do I go about backing up my modem/efs? Just want make sure I cover all my bases
Click to expand...
Click to collapse
Updated version of TWRP has those options

Tap to lock not working
I can confirm this that tap to lock is not working, im on the latest build too that is 15-2 and its not working when you double tap to lock.

Clean flashed from stock ZVE. Wiped, installed ZV8 modem, cm12, and gapps. Everything is working well but there's one major problem I've come across... I can't access Settings > Display. It always crashes with an error. Have I done something to cause this, and is there a simple fix? Should I reflash? Thanks.

DJMaj07 said:
Clean flashed from stock ZVE. Wiped, installed ZV8 modem, cm12, and gapps. Everything is working well but there's one major problem I've come across... I can't access Settings > Display. It always crashes with an error. Have I done something to cause this, and is there a simple fix? Should I reflash? Thanks.
Click to expand...
Click to collapse
Seems to be an issue with that build. Next nightly will probably fix it.

Sprint VVM and CM12
Anyone else use Sprint's Visual Voicemail. I had it on the stock ROM and like it. However, on my first install of CM12 on my LS980, I noticed the voicemail message audio was horribly distorted.
Can someone else confirm?

Viber and voicemail both are distorted, tab to sleep is not working, crashes in settings, nfc not working as well, loads of crazy bugs

2/21 build seems to have fixed Display setting FCing. Thanks!
2/21 build seems to have fixed Display setting FCing. Thanks!

What's the reason for modems after zv8 not working? In my area Spark is widespread and even fills in some areas band 25 lte isn't present, so I'd prefer to be able to use a modem that supports it.

LG G3 D852 Lollipop Root Android 5.0

Does anyone know of a way to root the LG G3 D852 running Android 5.0 Lollipop after the OTA update that recently came out?
I already tried using the CM12 nightly rom that runs Lollipop but it loses some much features from the LG G3 such as double tap to wake and I dislike the style of CM12 a lot.
Any help at all? I don’t want to use Cyanogen Mod at all.

Maybe this url can help you:
http://rootear.com/android/root-lg-g3-purpledrake#
Enviado desde mi LG-D802

Ramres said:
Maybe this url can help you:
http://rootear.com/android/root-lg-g3-purpledrake#
Enviado desde mi LG-D802
Click to expand...
Click to collapse
This method only works with Kitkat. So far there is no method to root Lollipop. You will have to downgrade to kitkat then root again and follow this thread written by autoprime http://forum.xda-developers.com/lg-g3/development/psa-stop-taking-ota-updates-update-t2909412

cytherean said:
This method only works with Kitkat. So far there is no method to root Lollipop. You will have to downgrade to kitkat then root again and follow this thread written by autoprime http://forum.xda-developers.com/lg-g3/development/psa-stop-taking-ota-updates-update-t2909412
Click to expand...
Click to collapse
Someone will have to make a stock flashable zip including root. This is something I'm attempting, but having very little success in doing due to the bumping of the kernel.

Hopefully someone will be able to figure this out -- I'll gladly donate to anybody that can root the LG G3 D852 with the Lollipop update. I am already missing Cloudy5 but decided to try out the update. I am very disappointed -- Rogers / LG seriously crippled Lollipop and many of the best features are gone. Even the lock screen notifications suck compared to AOSP ROMs. Eager to go back, may need to go back to KitKat, root again, then re-install Cloudy5.

karendar said:
Someone will have to make a stock flashable zip including root. This is something I'm attempting, but having very little success in doing due to the bumping of the kernel.
Click to expand...
Click to collapse
I don't know enough about it but am trying to learn as well, unfortunately i'm only a geek and not a techy geek. What I was hoping to do was flash back to KK then root/custom recovery and then flash system.img using the LG flashtool, so that I could have official Lollipop only rooted.
I was trying to follow this https://www.youtube.com/watch?v=M4s6wrpD2Gk, but it's not enough for me to go on, perhaps it can help put someone else in the right direction.
I've got the kzd file for if anyone needs it.

It looks like Lollipop rooting has begun
Something is happening http://forum.xda-developers.com/lg-g3/development/psa-stop-taking-ota-updates-update-t2909412/page19
UPDATE - Seems like @topet2k12001 has figured it out for the D858. Who knows enough or is willing to try it on the D852?
http://forum.xda-developers.com/showpost.php?p=59241779&postcount=186

Provided an update
cytherean said:
Something is happening http://forum.xda-developers.com/lg-g3/development/psa-stop-taking-ota-updates-update-t2909412/page19
UPDATE - Seems like @topet2k12001 has figured it out for the D858. Who knows enough or is willing to try it on the D852?
http://forum.xda-developers.com/showpost.php?p=59241779&postcount=186
Click to expand...
Click to collapse
Hi @cytherean,
Thanks for the mention.
I am going to work on uploading a YouTube video tutorial for the steps that I did so that owners of other LG G3 variants may try if it works for them.
I would say though, to try @autoprime's method first because that's exactly what I did. I merely added a minor/extra "manual" step to his procedure which is to "bump" the Lollipop boot.img of the D858HK (as the online "bumping" service is already taken down - I was too late in the game, unfortunately).
Stay tuned!
PS: would you guys recommend for me to create a thread solely for this? If yes, I'd probably name it with "D858HK" and then others can post and report their findings, so that I can update the thread title. Or do you suggest I just keep it under @autoprime's thread (or the D858HK thread)?
The only reason I am thinking of creating a thread is to increase visibility into the procedure. Rest assured that I always give credit to all the things I have learned through reading and discovering the process.
UPDATE: I decided to create a thread. At this point, I have tested and re-tested the procedure; it works for the D858HK (100% success rate). http://forum.xda-developers.com/lg-g3/general/guide-update-to-lollipop-root-bumpd-twrp-t3048845
Inviting owners of other LG G3 variants to try too, and let me know if it works.

[Q&A] [ROM][STOCK][30A - 5.0.2] Stock rooted Lollipop Rom for Int. G Pad by skin1980

[Q&A] [ROM][STOCK][30A - 5.0.2] Stock rooted Lollipop Rom for Int. G Pad by skin1980
Q&A for [ROM][STOCK][30A - 5.0.2] Stock rooted Lollipop Rom for Int. G Pad by skin1980
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][STOCK][30A - 5.0.2] Stock rooted Lollipop Rom for Int. G Pad by skin1980. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Fantastic
Fantastic, thank you very much, but I have a question, if i have installed the corean rom stock (flashing the KDZ file with lg flash tool) and not this, is there a Root method?

filippo.gambarota said:
Fantastic, thank you very much, but I have a question, if i have installed the corean rom stock (flashing the KDZ file with lg flash tool) and not this, is there a Root method?
Click to expand...
Click to collapse
I don't know, maybe you can root with the flex 2 method. BTW if you have the newer bootloader you can't install twrp or any custom kernel

filippo.gambarota said:
Fantastic, thank you very much, but I have a question, if i have installed the corean rom stock (flashing the KDZ file with lg flash tool) and not this, is there a Root method?
Click to expand...
Click to collapse
Your best option is probably to use the LG flashtool 2014 and flash the old 4.2.2. KDZ
Then your'e back on the old 100% stock LG rom .
Root with towelroot and install TWRP (latest TWRP does not seem to work with flashify, use terminal commands instead)
After that you can use TWRP to flash the lollipop V50030a zip, and that way you keep both root and custom recovery.

Hi, and first of all many thanks for this rom !
However, like in 4.4 Kitkat, I still have the SD card unmounted issue sometimes, and gamma is only at 1.8. What can I do about these problems ? Do I have to flash something in particular ?
For information, my tablet had this rom installed before : http://forum.xda-developers.com/lg-g-pad-83/development/rom-android-5-0-lollipop-lrx21m-t2941207/page7
And I made a full clean before installing the new rom...did I missed something ?

camera
The camera-problem is fixed. Finally !!
Camera does not work on other android 5. Only on this it works
Yes !! thank you very much for all the work.

Thank you very much for this rom, but I have a question pus install updates lg to be modified recovey TWRP 2.8.6.0

screen brightness
Anyone noticed that screen is very bright even on 0% ? (too bright for me) or maybe i did something wrong ?

Few questions
Hello and thanks for working on our device. I have few questions. Are there any screen shots? Should I expect any random reboot or it is really and completely stock!? Are there anything good left out? For instance the good automatic brightness or the knocking ability to turn screen on or off.
Others who installed this rom also feel free to answer please. I appreciate it

It's complete. The whole LG crap is there. It's what you get when you get the official update. I had no reboot in the 5 hours before I went back to aosp.

hey guys...
how run this relase? there are any bugs?

Hi, thx for your work! The rom is running really great.
Any plan to include mod multiwindow for all apps?
I have notice that in quick remote we have lost a lot of type of device. Is it possible to port an other quick remote more complete?

How it compares to aosp ROM? Faster? Some unique featues? Besides lg crap?

Shimaran said:
Hi, and first of all many thanks for this rom !
However, like in 4.4 Kitkat, I still have the SD card unmounted issue sometimes, and gamma is only at 1.8. What can I do about these problems ? Do I have to flash something in particular ?
For information, my tablet had this rom installed before : http://forum.xda-developers.com/lg-...om-android-5-0-lollipop-lrx21m-t2941207/page7
And I made a full clean before installing the new rom...did I missed something ?
Click to expand...
Click to collapse
Had the same sd card issue, maybe is lollipop related

There is any solution to the unexpected remove of sd card issue?
It wasn't occurring with the lollipop aosp version. Maybe I should go back to aosp...
Inviato dal mio LG-V500 utilizzando Tapatalk

Update to 30A from stock
Hello
Using a stock unrooted unmodified version of kitkat on my gpad and have few questions:
I've noticed the lollipop rom comes to around 1.1 gb. Will the OTA too be of the same size?
I've seen instructions that this rom can be dirty flashed over the stock rom. Does this mean I download and save the new rom locally in the tab, go to stock recovery and flash the new rom directly from recovery? Just like that?
Oh and has anyone got the OTA at all?
Edit: anyone using international version of the g pad...
Thanks

After 2 weeks using this ROM, I uninstalled it because gamma was too low and videos were quite sluggish. That's too bad because battery management is far better than CM 11.2 based ROMs (especially while tablet is not in use), and LG's interface is interesting...but it's not designed for everyday use. At least not yet.

Error Loki-fying
I get this error while flashing this rom via CWM --> Error loki-fying boot image, what am i doing wrong?

petition
Hello Skin1980. I respect your work works very well for me. I need your help and understanding. You can do the same for LG GPAD 8.0 v490 V49020a_00? I can not install this device and root. Please help me.

Hi I have a weird issue, my wifi disconnects constantly every time the tablet is on deep sleep mode or downloading something. It's annoying especially for downloads. I already checked my wifi settings and they are set at "Always on" but still. Anybody else have this issues? BTW I dirty flash it over 4.4.2 maybe with a clean flash it get fixed