Related
I NOW HAVE ROOT AND RECOVERY!
Thanks to mariostar32 and krankdroid!
Hi all,
I've just bought a Note II and am trying to get root. I've followed this tutorial carefully
HTML:
http://galaxynote2root.com/galaxy-note-2-root/how-to-root-galaxy-note-2-on-linuxubuntu/
and everything completes without error, but whenever I try and boot into recovery it just get a garbled Samsung boot logo and it never gets to recovery.
Now I can't go back to stock updates since my device has been modified, so I'm commited to getting root and custom recovery now.
Can anyone help me with what is going wrong?
Thanks
download the last version 4.1.2 and flash it via odin. If you need any help tell me.
mariostar32 said:
download the last version 4.1.2 and flash it via odin. If you need any help tell me.
Click to expand...
Click to collapse
I can no longer download updates from Samsung since I have tried to root it already.
I can't use Odin since I don't have Windows.
I have tried the method in the link above using Heimdall (Odin equiv. for Linux) and everything went fine (no errors, terminal output was as expected) but cannot get into any recovery (stock or custom)
Before you proceed with tutorial, make sure:
You have installed your Galaxy Note 2 N7100 USB drivers on your PC.
You need to enable USB debugging mode which is deactivated by default.
You smartphone should have 70-80% charge remaining.
Your Galaxy Note 2 N7100 should be factory unlocked.
Backup your important data like Call logs, SMS and other data in stored in phone memory so in case if anything goes wrong, your data is not hurt.
The update is only meant for Galaxy Note 2 N7100, so don’t try it on other variants.
Step 1) Download Android 4.1.2 XXDLK7 for Galaxy Note 2 N7100. " I can't post outside links so type in google galaxy note 2 xxdlk7 "
Step 2) Download ODIN v3.07. It's an old version but you can download a newer version of odin from google but it works np
Step 3) Turn OFF your mobile and go to Download Mode by pressing and holding the Volume Down + Home Buttons together for few seconds followed by Power button until you see Android logo with triangle on screen.
Step 4) Now open ODIN on your PC and connect your Galaxy Note 2 N7100 to your computer.
Step 5) Once your phone is successfully connected to your PC, the ID:COM box on ODIN will turn yellow and will show the COM port number.
Step 6) Select the downloaded file to install by following below steps:
Click on PDA and select file with HOME or CODE in its name.
Now click on Phone and select file with MODEM in its name.
Next click on CSC and select file with CSC in its name.
At last click on PIT and select file with .pit.
Step 7) Again to to ODIN window and check Auto Reboot and F. Reset Time options.
Step 8) Click on Start button in ODIN window to start the installation process. The process will take few minutes to complete.
Step 9) When the installation is completed, your phone will restart. I hope that i helped you GoodLuck
---------- Post added at 01:58 AM ---------- Previous post was at 01:53 AM ----------
B3rz3rk3r said:
I can no longer download updates from Samsung since I have tried to root it already.
I can't use Odin since I don't have Windows.
I have tried the method in the link above using Heimdall (Odin equiv. for Linux) and everything went fine (no errors, terminal output was as expected) but cannot get into any recovery (stock or custom)
Click to expand...
Click to collapse
srry didn't read your reply before i post mine, if u can flash the rom via odin, just try again to root but from another link, i can't put external links, follow a good tutorial for root, and i recommend twrp recovery
srry didn't read your reply before i post mine, if u can flash the rom via odin, just try again to root but from another link, i can't put external links, follow a good tutorial for root, and i recommend twrp recovery
Click to expand...
Click to collapse
I can't use Odin, there is no Linux version.
I've found the TWRP for the Note II:
HTML:
http://teamw.in/project/twrp2/115
Does anyone know if I flash the latest .img file from that using Heimdall will that give me a recovery to then install Super-SU from?
I've only just bought this phone and can't afford to buy another if I brick it, so I'm hesitant to just try without some expert knowledge.
you must be rooted first before putting twrp.
mariostar32 said:
you must be rooted first before putting twrp.
Click to expand...
Click to collapse
Ok, so how can I root it?
The only Linux tutorial I've found doesn't work since I can't get a working recovery in order to install Super-SU and get root.
Is there another way to get root? Or another method that might give me a recovery so I can get root?
Ok after you did the tutorial you got rooted or not ? download root check from play store and check
mariostar32 said:
Ok after you did the tutorial you got rooted or not ? download root check from play store and check
Click to expand...
Click to collapse
No I do not have root. I wish to get root access and install a recovery, then Super-SU.
Try this, It's a root way without odin.
http://forum.xda-developers.com/showthread.php?t=2130276
You can get the mobile Odin that let's you flash firmware from the device itself.
mariostar32 said:
Try this, It's a root way without odin.
http://forum.xda-developers.com/showthread.php?t=2130276
Click to expand...
Click to collapse
Awesome! The Aragorn exploit worked!
Thanks mario
krankdroid said:
You can get the mobile Odin that let's you flash firmware from the device itself.
Click to expand...
Click to collapse
Great! I'll get that to install TWRP or CWM then, since Heimdall seems to be corrupting the recovery when flashing it.
I've got root now (thanks to mario above!) so mobile odin is a good option
Thanks!
It's nice to see that you get rooted, nw download mobile odin and flash twrp.img
[guide] install at&t kitkat e980 stock flash + root + recovery - complete wipe !
FOR AT&T LG E980:
Basically, from my experience I put together this guide for anyone who wishes to flash a complete stock AT&T KitKat from .TOT file and the root and add recovery.
All the steps are what I have gathered from around the forums, SO I WILL GIVE CREDIT FOR STEPS THAT ARE OUTLINED BY OTHERS. These people helped by their postings.
FLASHING TOT FILES:
1. The BEST - I think a lot of us can agree - thread for the LG E980 flashing with STOCK firmware is this by HYELTON http://forum.xda-developers.com/showpost.php?p=44983841&postcount=1
STOP OVER THERE AND GIVE THE MAN SOME LOVE AND THANKS !!!!
.TOT files and .Kdz files for all versions can be found at Hyelton's thread above. Also, more details for flashing .TOT vs .Kdz files there. Below is some tips from my experience.
Here is the exact TOT file I used: http://www.mediafire.com/download/djjmck2eost77e3/BIN_LGE980AT-00-V20g-ATT-US-APR-28-2014+0.tot
SOME OF MY TIPS: FROM MY EXPERIENCES
2. The only hitch is getting LGFlash Tools and hacking it. I tried the links on Hyelton’s thread but some are now too new to be hackable. For example, one must find the reg key for the new version of LGTools he links to. Megalock.dll is hit-or-miss. There are other ways for sure but I did not bother further.
3. I found that lower versions of LG Flash Tool (v 1.4.1330R) works just fine.
EDIT: The latest version of LG Flash Tools is here http://www.mediafire.com/download/6g1uyoz2zsiqq1c/LG+Phone+Flash+Stuff.rar
And it contains the DLL to be used during flashing. I STRONGLY SUGGEST USING THIS. You MUST -MUST- TURN OFF INTERNET WHEN USING FLASH TOOLS. This pack contains the full software, and dll files. I have flashed using just this package >10 times at least while testing roms
a.Connect phone and let Windows install drivers. In my case, Windows 8 default were just fine.
b.Put your phone in download mode.
c.Connect it to your computer. In case of windows 8 the windows default drivers work fine.
d.Follow Hyelton’s steps.
EDIT: See posts #32and #33 in this thread. Do not go back to download. But wait for fastboot to install. See post #33 for this. Just wait patiently, the phone will reboot to full normal mode/setup screen, then the LG tools will say pass. BE VERY PATIENT.
ROOTING AND RECOVERY:
ROOTING:
THANKS TO jarari2:
1.This method here works just fine: http://forum.xda-developers.com/showthread.php?t=2699067
Simple bat file method. Turn ON USB Debugging before trying.
2.RECOVERY:
THANKS TO hoangnova AT http://lgviet.com/forum/threads/moi-thu-ve-lg-g-pro-4-4-2-root-recovery-kdz.14841/
** Download and move following file to phone.
** https://docs.google.com/file/d/0B4vSbKccbcIOV1NjMDlqWUdmVm8/edit?pli=1
OR
** https://onedrive.live.com/redir?resid=1F371A0EDB2BC3A6!107
** Run apk. Done.
You should have a full stock KitKat + Rooted + Recovery… Enjoy!!
If this guide helped you, you can buy me a beer/coffee or any such wonderful drink.
chappatti said:
FOR AT&T LG E980:
...
If this guide helped you, you can buy me a beer/coffee or any such wonderful drink.
Click to expand...
Click to collapse
The download on the google drive says it's non-existent.
Nice guide. Thanks!
jdk2 said:
The download on the google drive says it's non-existent.
Edit: Here's the file: http://forum.xda-developers.com/attachment.php?attachmentid=2715141&d=1398757138
Click to expand...
Click to collapse
THANKS ! Fixed !!
Where can I find the .TOT file?
ducktat said:
Where can I find the .TOT file?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=44983841&postcount=1
ducktat said:
Where can I find the .TOT file?
Click to expand...
Click to collapse
I decided to just link directly to the actual TOT file I used.....!
Link in OP.
Roots Perfectly
Upgraded to KK 4.4.2 via OTA and rooted follow the directions contained here and every worked perfectly! Thanks for gathering the information!
MDMTahiti said:
Upgraded to KK 4.4.2 via OTA and rooted follow the directions contained here and every worked perfectly! Thanks for gathering the information!
Click to expand...
Click to collapse
No Problem.
To do the OTA I guess you went back to complete stock ? Yeah, that is a good option too....! Only, it requires one extra flash (going back to stock!)
Just for info, can you please add the steps to your post.
Thanks.
Where to download AT&T kitkat upgrade ?
lchen5 said:
Where to download AT&T kitkat upgrade ?
Click to expand...
Click to collapse
In the OP and in my thread
hyelton said:
In the OP and in my thread
Click to expand...
Click to collapse
Hey, hyelton, thanks for visiting,,!
The steps
chappatti said:
No Problem.
To do the OTA I guess you went back to complete stock ? Yeah, that is a good option too....! Only, it requires one extra flash (going back to stock!)
Just for info, can you please add the steps to your post.
Thanks.
Click to expand...
Click to collapse
I went back to pure stock and no custom recovery, then did the 10p update - I found that the update to 10p would not work with other than stock recovery. I then just used the settings query for OTA update, downloaded and installed - all my programs and data were intact after the update, except apps requiring root would not run correctly. I then followed your steps to root. I still have the stock recovery at this point. KitKat runs great.
MDMTahiti said:
I went back to pure stock and no custom recovery, then did the 10p update - I found that the update to 10p would not work with other than stock recovery. I then just used the settings query for OTA update, downloaded and installed - all my programs and data were intact after the update, except apps requiring root would not run correctly. I then followed your steps to root. I still have the stock recovery at this point. KitKat runs great.
Click to expand...
Click to collapse
So when going back to complete stock the 10p, how did you keep apps, settings if you used odin.? Just interested in your procedure since obviously OTA on stock will retain programs and settings.
It just worked...
chappatti said:
So when going back to complete stock the 10p, how did you keep apps, settings if you used odin.? Just interested in your procedure since obviously OTA on stock will retain programs and settings.
Click to expand...
Click to collapse
Honestly, I don't know. I had been flashing lots of different ROMS and then went back the total day 1 stock. I then updated OTA to 10p a couple of months ago and rooted but did not flash a custom recovery. I then heard that 4.4.2 was available, checked via the about link and downloaded. All the apps and data stayed in place. I then rooted and have yet to flash a custom recovery. I'm sorry I can't give you more detail. But I can tell you that I seem to have better battery life, and I had to pair my phone to my car again. Good luck.
i miss network connection
hi, i follow your steps, and it worked, i have KK now on my e980.
but... sometimes i lost my network connection, and it returns in a minute or two
any ideas?
With the recovery installed from this thread. Can we flash non stock custom roms or just stock roms.
Sent from my HTC One using XDA Premium 4 mobile app
Problems flashing.
Hey! I can't flash the .TOT, the Flash Tool doesn't recognize port COM41, or any other. I go to device administrator, and there's my phone as port 41, but the Flashing Tool doesn't. Any ideas?!
Ink Rampant Wolf said:
Hey! I can't flash the .TOT, the Flash Tool doesn't recognize port COM41, or any other. I go to device administrator, and there's my phone as port 41, but the Flashing Tool doesn't. Any ideas?!
Click to expand...
Click to collapse
Here is the detailed thread for using Lg flash tool. Http://forum.gsmhosting.com/vbb/f17...flashv141-free-no-need-b2b-user-pass-1628819/
I guess you changed yiu computer date and time before using it as mentioned in OP??
Also what Rom are you coming from? Is your bootloader unlocked/lokified?
Can you guys help me out? I already rooted using towelroot. Is it possible to just install the apk for recovery without doing the other steps?
Sent from my Nexus 5 using Tapatalk
Jacob030 said:
Can you guys help me out? I already rooted using towelroot. Is it possible to just install the apk for recovery without doing the other steps?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
I have not used towelroot ever. BUT, I do not see why you cannot add a recovery irrespective of root method. I have done this mtself.
Sent from my GT-N8013 using XDA Free mobile app
I have Samsung Galaxy Note 2 running Android 4.3 stock. It have'nt been rooted or modified in anyway. Just like a fresh out of shop Note 2,
only it is over a year old, so the warranty is over. I'm very interested with the DN3 v5 ROM. Is there any specific guide (preferably step-by-step guide) on how to get from here (fresh phone) to the finished phone (completed with working DN3 ROM).
I understand that it needed to be rooted, have specific bootloader and the latest recovery mode. (detailed guide to install them would be very helpfull). I've done flashing custom ROM on my Sony Xperia Miro long ago, but on this Samsung it seems much more harder.
So, I just need a non-confusing guide to do it, as I don't have much experience in this thing.
I've found many guide on this, but most of them not exactly the same as my specs. Just worried that the worst would happen.
And lastly, I have Knox in my phone but I never installed it. Is it gonna make any different or what?
If there is any existing guide on it, I would appreciate the link. Thanks in advanced.
Model : GT-N7100
Android version : 4.3
Baseband version : N7100XXUEMK1
Build number : JSS15J.N7100XXUEML3
Sprint Note II L900 CUSTOM ROM ??
Rooted.
Cwm 6+.
Flash Custom ROMs + Gapps Successfully.
My ISSUE (after flashing ROM etc.) Reboots Fine into ROM.
however, if I turn off the device..I have to Reboot into recovery and flash again...
WHY are ROMs not "Sticking" and Rebooting if device is shut down or Dies (Battery)?
???ANY HELP ?? I sure its simple but I'm discombobulated on this issue.
Give twrp a try
Sent from my SGH-I317 using Xparent Cyan Tapatalk 2
Simple.
rhaneyjr said:
Give twrp a try
Sent from my SGH-I317 using Xparent Cyan Tapatalk 2
Click to expand...
Click to collapse
Twrp didn't get the job done for me. But Thx.
There has got to be an easy Explanation.
If I turn off my device I have to reflash ROM..WHY?
JEDAlive said:
I have Samsung Galaxy Note 2 running Android 4.3 stock. It have'nt been rooted or modified in anyway. Just like a fresh out of shop Note 2,
only it is over a year old, so the warranty is over. I'm very interested with the DN3 v5 ROM. Is there any specific guide (preferably step-by-step guide) on how to get from here (fresh phone) to the finished phone (completed with working DN3 ROM).
I understand that it needed to be rooted, have specific bootloader and the latest recovery mode. (detailed guide to install them would be very helpfull). I've done flashing custom ROM on my Sony Xperia Miro long ago, but on this Samsung it seems much more harder.
So, I just need a non-confusing guide to do it, as I don't have much experience in this thing.
I've found many guide on this, but most of them not exactly the same as my specs. Just worried that the worst would happen.
And lastly, I have Knox in my phone but I never installed it. Is it gonna make any different or what?
If there is any existing guide on it, I would appreciate the link. Thanks in advanced.
Model : GT-N7100
Android version : 4.3
Baseband version : N7100XXUEMK1
Build number : JSS15J.N7100XXUEML3
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2055736
iVoSiK said:
Rooted.
Cwm 6+.
Flash Custom ROMs + Gapps Successfully.
My ISSUE (after flashing ROM etc.) Reboots Fine into ROM.
however, if I turn off the device..I have to Reboot into recovery and flash again...
WHY are ROMs not "Sticking" and Rebooting if device is shut down or Dies (Battery)?
???ANY HELP ?? I sure its simple but I'm discombobulated on this issue.
Click to expand...
Click to collapse
And what on earth has that got to do with the OP's thread?
Stop hijacking peoples topics.
Well, I manage to root using dr.ketan multitool. But then problem arise when i tried to install mj5 bootloader. In Odin it says fail and in my phone it says unsupported version. Now my phone stucked with this message, "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."...What do I do? Help please...
Edit :
I tried to flashed Philz recovery and it went back to life! Now, I need a way to install bootloader for DN3 v5, any version would be fine I guess. Help please...
Edit :
Finally finished flashing DN3. Just flash twrp using mobileodin and use current bootloader then flash DN3.
++++++++++++++++++++++++
DOWNLOADING LINK IS UPDATED
++++++++++++++++++++++++
Hi,
while i am looking, i found the below link for how to root S3 Neo I9301I 4.4.2
CF-Auto-Root
i don't know if it is legal to post a link from another dev. site !!!
anyway it works for me
my device is:
I9301I with one micro sim
android 4.4.2
baseband: I9301IXXUANF2
Build: I9301IXXUANH2
------------------------------------------------
Thanks? Maybe?!!
+[UPDATE]++++++++++++++++++++Coped from the original site++++++++++++++++++++++++++
++And Just in case the upper link was removed or the site is not available anymore for any reason ++
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
These are the instructions to root Samsung Galaxy S3 Neo GT-I9301I (running on android 4.4.2) using Odin on Windows Computer.
Requirements:
1)Your Samsung Galaxy S3 Neo GT-I9301I should have atleast 30-40 percent of battery to perform the rooting process.
2)Root Samsung Galaxy S3 Neo GT-I9301I using Odin.
Step 1:
DOWNLOAD USB Driver on your computer.
If Samsung USB Driver is already installed on your computer then Skip this Step.
Step 2:
LINK and extract the root files on your computer.
Step 3:
Now, Switch off your Smartphone.
Step 4:
After switching off the phone, you need to boot into Download Mode.
To boot into download mode Press and hold Zoom Left and Power button at same time for 5-8 seconds until download mode is active.
Step 5:
In the Download mode you will be able to see a Warning Yellow Triangle Sign.
In this situation you have to press the Zoom Right key to continue.
Step 6:
Now, Open Odin3 (found in the extracted files, that you have downloaded in the Step 2) on your computer.
Then connect your Smartphone to the computer.
Step 7:
Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show “Added” message at
the lower-left panel.
Step 8:
Once your device is detected by Odin, click on the PDA button and select the CF-Auto-Root.tar file (you have downloaded this file in step 2).
Step 9:
Now, click on the Start button in Odin to begin the Flashing.
Step 10:
Flashing usually takes 30-50 seconds to complete the rooting process on your Samsung Galaxy S3 Neo GT-I9301I.
Once Rooting process is completed you will be able to see a Green Box with Pass written on it in Odin.
During this process Smartphone will re-boot automatically.
Step 11:
Once you see, the Pass message in Odin, you can disconnect your Device from the computer.
Step 12:
Now, to make sure you have successfully rooted your Samsung Galaxy S3 Neo GT-I9301I, open Applications Menu on your Smartphone and
Find SuperSU App.
If this app exist on your Smartphone then it means you have successfully rooted your device. [:good:].
Optional:
You can also verify that your device is successfully rooted or not by Root Checker Application.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Are YOU LOOKING FOR ---->
How to be able to write files to the MicroSD card on S3 Neo I9301I..?!!
Click the above link to figure out how
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
I used this and I rooted successfully but I have no idea whether it has viruses or not, for all I know my phone may be infected
Work like a charm for me
needo2 said:
I used this and I rooted successfully but I have no idea whether it has viruses or not, for all I know my phone may be infected
Click to expand...
Click to collapse
Don't worry
Its not a viruse
You can try to do a scan viruse through your pc using your usb cable
Sent from my GT-I9301I using XDA Free mobile app
Goofy9020 said:
Work like a charm for me
Click to expand...
Click to collapse
Happy to help
Sent from my GT-I9301I using XDA Free mobile app
Can i use this to root I9300i (dualsim) with 4.3 stock rom?
arashhn said:
Can i use this to root I9300i (dualsim) with 4.3 stock rom?
Click to expand...
Click to collapse
Not sure ... don't risk
Sent from my GT-I9301I using XDA Free mobile app
What about knox flag? This root method trigger the warranty flag?
Official site chainfire said: this metod will trip KNOX.
Probably the best method will be change kernel on older than you have now via odin. And use towelroot app, for me this method worked fine, without tripping KNOX. I have Old kernel, but now i cant upload this file for you because I have it on ma laptop at home.
Wysłane z mojego GT-I9301I za pomocą Tapatalk 2
jogurtowocowy said:
Official site chainfire said: this metod will trip KNOX.
Probably the best method will be change kernel on older than you have now via odin. And use towelroot app, for me this method worked fine, without tripping KNOX. I have Old kernel, but now i cant upload this file for you because I have it on ma laptop at home.
Wysłane z mojego GT-I9301I za pomocą Tapatalk 2
Click to expand...
Click to collapse
Thanks, On What ROM is based the old kernel that you have, maybe I can extrack it from a ROM in Sammobile. I have an old kernel but is for android 4.3 not 4.4. I have the S3 Neo with dual SIM and 1.4GHz Snapdragon 400 quadcore.
I dont know, because I downloaded only old kernel, without stock rom. I have single SIM s3 Neo 4x1.4 eu version.
I think, last rom with old kernel is from 05/06 2014 or older ver.
Wysłane z mojego GT-I9301I za pomocą Tapatalk 2
Thanks! Everything works great with this method!
Is there a way to root and install some recovery on SIII Neo i9301i 4.4.2 from Ubuntu Linux? All I could find is the way to do it from Windows.
Milos_SD said:
Is there a way to root and install some recovery on SIII Neo i9301i 4.4.2 from Ubuntu Linux? All I could find is the way to do it from Windows.
Click to expand...
Click to collapse
Hi
In theoriy it is possible to extract the contents of that tar file and flash it with adb or maybe heimdall.
There is a recovery img and some cache image. I guess you need to write the recovery img to the recovery partition. But i dont know the commands (would be also interested in them!!) and the chache image belongs also somewhere.
If someone could point out the locations and the commands this would be awesome!
Thanks
Manuel
Manux2015 said:
Hi
In theoriy it is possible to extract the contents of that tar file and flash it with adb or maybe heimdall.
There is a recovery img and some cache image. I guess you need to write the recovery img to the recovery partition. But i dont know the commands (would be also interested in them!!) and the chache image belongs also somewhere.
If someone could point out the locations and the commands this would be awesome!
Thanks
Manuel
Click to expand...
Click to collapse
Hi I just want to say that i succesfully rooted my neo in Linux with a WinXP install in Virtualbox! Just boot into download mode and then add the device in Virtualbox. I tied it 2 times, second time worked. First time he did not get a connection to the phone.
Also i installed the udev rules from heimdall before doing this!
Happy rooting
I found a web java app called JOdin3 that needs heimdall on Linux to be able to operate. It detects a phone as connected when in download mode, but I didn't have the guts to try and flash it. Did anyone else tried that application on any OS?
Hi there, I have a gt-I9301I with a baseband: I9301IXXUANI2 can I try this method? Is there any risk of getting a brick?
thanks
my s3 neo refuses rooting
I have a S3 Neo I9301IXXUAOD2, i tried to make the root of the phone with Odine but on the restart of the phone a backup start and the phone isn't rooted.... someone can help me please?
P.S. Sorry for my bad english
Thanks
Hello Everyone!
I'm stuck!!! If anyone can help, it is so appreciated!
I attempted to root my subject named device using ODIN following these directions:
http://forum.xda-developers.com/galaxy-note-10-2014/development/root-cf-auto-root-t2905495
Everything seems to go as planned until restart.. the tablet continuously reboots, over and over, but fails to load.
I have no clue what to do from here, so this is my only option... ask those who have much more knowledge than me!
Thanks in advance. I really appreciate your assistance.
That's called a bootloop. Something went wrong with flashing. What is a subject named device? That autoroot method only works for smp600 that is already running stock 5.1 or 4.4.2 . Boot into downloadmode using the appropriate buttons, then Download stock firmarwe from sammobile.Com and flash via Odin to get back a working device.
Which build are you on? If it is 5.1.1, that method will result in a bootloop if you try to root.
Use this instead
http://forum.xda-developers.com/showthread.php?p=63637426
Sent from my SM-N915G using Tapatalk
diabl0w said:
That's called a bootloop. Something went wrong with flashing. What is a subject named device? That autoroot method only works for smp600 that is already running stock 5.1 or 4.4.2 . Boot into downloadmode using the appropriate buttons, then Download stock firmarwe from sammobile.Com and flash via Odin to get back a working device.
Click to expand...
Click to collapse
The tablet is a Samsung Galaxy Note 10.1 (2014 Edition) Model SM-P600.
Not sure about the build.... but I will most definitely checkout the link you provided - thanks!
Question, can I flash a different rom rather than stock?
Also, I was just able to flash TWRP via ODIN and was able to get TWRP to load on the device. I'm hoping to flash a custom rom from the external SD via TWRP. I don't care which one at this point.. just need to get the tablet functional again and get a backup saved lol.
smoothbeaver said:
Not sure about the build.... but I will most definitely checkout the link you provided - thanks!
Question, can I flash a different rom rather than stock?
Also, I was just able to flash TWRP via ODIN and was able to get TWRP to load on the device. I'm hoping to flash a custom rom from the external SD via TWRP. I don't care which one at this point.. just need to get the tablet functional again and get a backup saved lol.
Click to expand...
Click to collapse
Here is "how to" instruction by me - post #225 for upgrade to the latest 5.1.1 and root your device. Once done and you want custom rom, just boot into twrp and flash any custom rom that you like. Let me know if you have issue.
http://forum.xda-developers.com/gal...lollipop-5-1-1-galaxy-note-10-t3239971/page23