Develop Bugs

[Q] Now stuck PLS HELP

This is my very first post i have found many solution on this forum which helped me & my friends But need help with this 1
Ok here goes my Story
I have recently brought s3(used) it was on 4.3 & rooted with philz touch 6 didn't check the firmware details etc
As i was playing with philz touch 6 & did something which i remember was to clean rom or some thing now the phone boots & shows Samsung Galaxy SIII & stops there
I think its on I747UCUEMJ2 Modified ROM » Root, KNOX Disabled, SE-Linux Disabled not sure
Is there a way to get it back ..?

If you are able to access download mode, you could easily flash a custom ROM.

S i can access download mode
Can i go back to stock or only custom firmware from now on..?

vipimg said:
S i can access download mode
Can i go back to stock or only custom firmware from now on..?
Click to expand...
Click to collapse
If I were you, I would go to a custom firmware. That is if you have a custom recovery like ClockWorkmod or TWRP. But you can flash stock, at least to my understanding. But I'd look into that.
(Your bootloader will need to be unlocked too)

I am on Clockworkmod v6.0.3.1 the thing is i don't want a custom firmware 2 many problems
I would like to load stock buy have read most of them get their phones bricked

vipimg said:
I am on Clockworkmod v6.0.3.1 the thing is i don't want a custom firmware 2 many problems
I would like to load stock buy have read most of them get their phones bricked
Click to expand...
Click to collapse
If you were on the 4.3 official stock ROM that was pushed out, you have a possibility of bricking your device downgrading to lets say the 4.1.2 stock ROM.
A custom ROM isn't bad though. If you do like Touchwiz based ROMs you may be able to find one in the development section.
Sent from my Nexus 7 using Tapatalk 4

I am in need of stock so that i an connect to kies & back up useful info
A good custom rom for daily use which do u prefer ...?

vipimg said:
I am in need of stock so that i an connect to kies & back up useful info
A good custom rom for daily use which do u prefer ...?
Click to expand...
Click to collapse
What information are you wanting to backup?
You'll have to find your ROM of choice. If you want a reliable ROM then I'd recommend something that is stable, which should always be said in the thread,
Sent from my Nexus 7 using Tapatalk 4

Notes,contacts ,sms etc
Will check out stable Rom

vipimg said:
Notes,contacts ,sms etc
Will check out stable Rom
Click to expand...
Click to collapse
Contacts could be backed up if you sync with your gmail account. SMS can be done by an application on the market. Notes that are synced on Evernote or Keep should just be there.
Sent from my Nexus 7 using Tapatalk 4

ok will check it out

Ok i have downloaded some Rom (all different ) i get status 7 when installing it & re do the script i get status 6 error
Any ideas about it ..?

So i waited for a while to get my answers or solution still nothing
Got bored looking @ my s3 lying as a paper weight as decide to downgrade to the stock firmware 4.1.1 by odin
Read many user's post about downgrading from 4.3 to stock 4.1.1 will brick the phone BUT it works with out problems & on the first try
Really Happy that now its on stock & can do a update/backup my stuffs .........

MJ5 bootloader flash problems

Hi guys!
I hope that I chose the right forum to ask my question: I installed this rom onto my Note 2 LTE N7105, but now I don't have wifi (as the text in the rom description says). Before I flashed the rom, I had installed Devils Rom (deodexed and deknoxed 4.3 stock) with the devils kernel (based on MK5). I thought that the bootloader will be kept, because I already installed a wifi hotfix for that bootloader.
Now I have the new 4.4 rom installed, it works fine - except for wifi. If I got this right (if not, correct me) - flashing the MJ5 bootloader will solve the problem and I won't have KNOX triggered (now I have a "MA5" bootloader). So I tried to flash the MJ5 bootloader with ODIN 3.09 but it keeps failing. The drivers are installed, I can access the download menu. My pc recognizes the phone as COM5, but when I load the bootloader and click on flash, almost instantly a red FAIL appears in the first block. The output says "writing NAND..." and then "FAILED".
Now I am a bit confused - does the MJ5 bootloader work with the Note 2 LTE or only the non- LTE version? Are there any other ways to get wifi to work? If there's now way around, I am willing to trigger my knox.
Thanks in advance, I hope you can help a very confused user

Im having the same problems. odin is giving no love on updating the bootloader

Kenny_ken said:
Hi guys!
I hope that I chose the right forum to ask my question: I installed this rom onto my Note 2 LTE N7105, but now I don't have wifi (as the text in the rom description says). Before I flashed the rom, I had installed Devils Rom (deodexed and deknoxed 4.3 stock) with the devils kernel (based on MK5). I thought that the bootloader will be kept, because I already installed a wifi hotfix for that bootloader.
Now I have the new 4.4 rom installed, it works fine - except for wifi. If I got this right (if not, correct me) - flashing the MJ5 bootloader will solve the problem and I won't have KNOX triggered (now I have a "MA5" bootloader). So I tried to flash the MJ5 bootloader with ODIN 3.09 but it keeps failing. The drivers are installed, I can access the download menu. My pc recognizes the phone as COM5, but when I load the bootloader and click on flash, almost instantly a red FAIL appears in the first block. The output says "writing NAND..." and then "FAILED".
Now I am a bit confused - does the MJ5 bootloader work with the Note 2 LTE or only the non- LTE version? Are there any other ways to get wifi to work? If there's now way around, I am willing to trigger my knox.
Thanks in advance, I hope you can help a very confused user
Click to expand...
Click to collapse
Did you try to flash the kernel as stated in the installation instructions of the rom that your trying to install?

I have the agni kernel as it is the only way to get the wifi to work without the bootloader, which im trying to get too. For the life of me i cannot figure out why odin doesnt want to flash the bootloader. mj5 or nd3 makes no difference. according to info app my boot loader version is N7105ZHALJ4. Do I need to step up 'slower'?
I want to go to any of those recent bootloaders so wifi will work normally. It seems slow on the agni kernel but at least it works.

TeamFox said:
I have the agni kernel as it is the only way to get the wifi to work without the bootloader, which im trying to get too. For the life of me i cannot figure out why odin doesnt want to flash the bootloader. mj5 or nd3 makes no difference. according to info app my boot loader version is N7105ZHALJ4. Do I need to step up 'slower'?
I want to go to any of those recent bootloaders so wifi will work normally. It seems slow on the agni kernel but at least it works.
Click to expand...
Click to collapse
AFAIK you can't install Agni Kernel using Odin. Instead use your Custom Recovery to install that kernel, under "Install Zip from Storage" option of your custom recovery. HTH.

asin_punk said:
AFAIK you can't install Agni Kernel using Odin. Instead use your Custom Recovery to install that kernel, under "Install Zip from Storage" option of your custom recovery. HTH.
Click to expand...
Click to collapse
To clear things up i have already got agni kernel installed via recovery. I just cant update my bootloader via odin.

problem flashing mj5 bootloader and agni kernel too
i am on phoenix rom v18.8
cannot figure out if i am on mj5 bootloader
how to check my bootloader version?
secondly, i m trying to flash mj5 via odin but it says FAILED
Trying to flash agni kernel via odin and mobile odin,, it says success but when i check in my phone, nothing is done...
where am i going wrong?
pls help

anandsaurabh said:
i am on phoenix rom v18.8
cannot figure out if i am on mj5 bootloader
how to check my bootloader version?
secondly, i m trying to flash mj5 via odin but it says FAILED
Trying to flash agni kernel via odin and mobile odin,, it says success but when i check in my phone, nothing is done...
where am i going wrong?
pls help
Click to expand...
Click to collapse
Agni kernel is only flashable via recovery not with odin.. Its a zip file.. U can flash it using CWM or Philz Or twrp recoveries
Sent from my GT-N7100 using XDA Premium 4 mobile app

U r right hazin ... That file can be flashed only via recovery... But I m not able to flash it.. It goes into aroma installer, does its work and says done but does not show on settings... I e saved log file too of that process...

So no answer on this question yet?? I'm also trying to flash the MJ5 bootloader using Odin, no luck though.
Can anyone explain why it keeps failing?

did you fix the problem ?
apuntigam said:
So no answer on this question yet?? I'm also trying to flash the MJ5 bootloader using Odin, no luck though.
Can anyone explain why it keeps failing?
Click to expand...
Click to collapse
having the same thing now...

Davids said:
having the same thing now...
Click to expand...
Click to collapse
No, I never managed to fix it. I think I found out in the end that there never was an MJ5 bootloader for the GT-N7105 (the international LTE version). There was only an MJ5 bootloader for the non-LTE version, the GT-N7100. And of course, that phone's bootloader will never work on the N7105.
So we're out of luck it appears

so the phone is dead ?
apuntigam said:
No, I never managed to fix it. I think I found out in the end that there never was an MJ5 bootloader for the GT-N7105 (the international LTE version). There was only an MJ5 bootloader for the non-LTE version, the GT-N7100. And of course, that phone's bootloader will never work on the N7105.
So we're out of luck it appears
Click to expand...
Click to collapse
noting to do to bring back wifi&BT ?

Davids said:
noting to do to bring back wifi&BT ?
Click to expand...
Click to collapse
All of the new KitKat ROMs have fixes built in for that. Some of the Lollipop ROMs also fix this, so you don't really need that bootloader.

apuntigam said:
All of the new KitKat ROMs have fixes built in for that. Some of the Lollipop ROMs also fix this, so you don't really need that bootloader.
Click to expand...
Click to collapse
can you give me a link pls for somthing that works ?
i am Desperate a week with no wifi BT
THX

Davids said:
can you give me a link pls for somthing that works ?
i am Desperate a week with no wifi BT
THX
Click to expand...
Click to collapse
I'm on NamelessROM 5.0.2 at the moment, works fine for me. I'd probably recommend that one, battery life is also great. It's in the N7105 development forum. :good:
I was also on CM11 official, worked like a charm. There are a number of 4.4.4 ROMs in the N7105 development forum that were quite mature and worked well.

apuntigam said:
I'm on NamelessROM 5.0.2 at the moment, works fine for me. I'd probably recommend that one, battery life is also great. It's in the N7105 development forum. :good:
I was also on CM11 official, worked like a charm. There are a number of 4.4.4 ROMs in the N7105 development forum that were quite mature and worked well.
Click to expand...
Click to collapse
i have the 7100..
somthing for that device..

Davids said:
i have the 7100..
somthing for that device..
Click to expand...
Click to collapse
Ok, then it's a completely different discussion... not sure why the bootloader would be failing in that case, since it was built for that device. You could try a different Odin? (Assuming of course that your are NOT trying to DOWNGRADE the bootloader... it's well known that you can't downgrade the bootloarder to MJ5 from something more recent).
Otherwise, I'm sure there are equally useful ROMs for the N7100 in the Note 2 Original Development forum.
But, since your device is probably pretty old and almost certainly out of warranty by now, I would seriously consider flashing the latest official Samsung ROM to get the latest bootloader and then flash whatever you want on top of that. Voiding the warranty is irrelevant if you're already out of warranty. But, I have heard that even with the latest bootloader some people still have trouble with wifi and BT. In that case all I can suggest is playing around with different ROMs until you find something that works for you. As I'm not a N7100 user I can't really offer more advice than that, sorry man.

Guys where I can find a REAL WORKING link to download mj5 or higher bootloader??
I tried a lot & most of them are obselete

Maybe downnload the latest stock ROM from sammobile.com and extract the bootloader?
https://www.sammobile.com/firmwares/database/GT-N7105/

[Q] Ace 2 stuck on Samsung Logo - won't go in recovery mode

Hey everyone
I have a huge problem with my ace 2, it is stuck on the Samsung logo and it won't go in recovery mode. Please, let me explain, I was fed up with my rooted 2.3 GB ace 2 and I decided to flash CM 10.2. I downloaded the .zip and flashed it along with the suitable gapps. After booting, I realised it did not have any signal and wifi was not available. After searching online for a while with not any results, I decided to flash CM 11. After that, wifi was back but still no signal. I said sc**w it and downloaded the official JB firmware for my phone from sammobile. After flashing it with odin, the phone won't boot. It stays in samsung screen. It won't even go in recovery mode in order to erase cache etc. I tried downgrading to the stock GB, ADB, KIES, DROID EXPLORER, the phone is recognised only in ODIN.
Can anyone help ?
-Thank you for your time

First Try odin with newest custom stocked rom. I got this "brick" couple times. And this think if working every time.

tsosmi_GR said:
Can anyone help ?
-Thank you for your time
Click to expand...
Click to collapse
Any (!!) CM needs JB FW at first...
I suggest to begin from scratch! Let the Phone boot completely after each FW flash.
1) Flash 3-Parted FW (see my sig) - Be sure you pick the correct one for you Phone (8160 / 8160P / 8160L)
2) Flash stock JB for your Phone and country
3) Flash CM11 and Gapps

fluffi444 said:
Any (!!) CM needs JB FW at first...
I suggest to begin from scratch! Let the Phone boot completely after each FW flash.
1) Flash 3-Parted FW (see my sig) - Be sure you pick the correct one for you Phone (8160 / 8160P / 8160L)
2) Flash stock JB for your Phone and country
3) Flash CM11 and Gapps
Click to expand...
Click to collapse
Hey man you saved me! Thank you very much! The three part rom did the trick! I bought an lg g3 this morning though thinkin my phone was totaled but Im gonna give my old (but thanks to you, working) ace 2 to my sister ..

Maybe this thread gonna help my prob.
Im accessing the thread by tapatalk and cant see what is your signature @fluffi444
Im suffering the same problem, the phone only able to enter downloadmode, i've tried install russian gingerbread with 3 file csc pda, and pit. But it doesnt work.
Maybe i need something else.
Sent from my Moto G using Tapatalk

Upgrade firmware only to cof8?

Hello all,
I was wondering if I can upgrade the radio and bootloader to COF8 without running a 5.1.1 ROM. I am rooted with Ktoonz kernel with firmware AOC9 with 5.0.2 stock ROM.
TIA.
Bob

Once you upgrade bootloader , you can only run 5.1.1. Not sure about ONLY upgrading radio.

Thank You for the reply..
So once I ODIN the new firmware, I need to load a 5.1.1 rom before letting the phone boot up to the 5.0.2 rom?

highlander07422 said:
Thank You for the reply..
So once I ODIN the new firmware, I need to load a 5.1.1 rom before letting the phone boot up to the 5.0.2 rom?
Click to expand...
Click to collapse
You cannot boot a 5.0.2 ROM once you are on 5.1.1 firmware. That's the way it is as far as I know. There is no downgrade possible once you are on 5.1.1
Personally, I have no issues with 5.1.1. Great ROMs now. Great battery life. I personally do NOT care about Knox or the ability to run Samsung Pay. Just my 2c.

Thank You.
SO.. Once I start the firmware upgrade.. I must immediately load a 5.1.1 rom.
1. Upgrade the baseband... dont re-boot.
2. Upgrade the Bootloader... dont re-boot.
3. Install a 5.1.1 rom... reboot. Thinking of the ROM below.
4 joy??
http://forum.xda-developers.com/gal...xtrestolite-deodexed-mod-edition-1-3-t3119968
Doing a lot of reading and still not sure what TWRP to use. Any help with this? So many posts about this, its confusing.
Thank You in Advance

highlander07422 said:
Thank You.
SO.. Once I start the firmware upgrade.. I must immediately load a 5.1.1 rom.
1. Upgrade the baseband... dont re-boot.
2. Upgrade the Bootloader... dont re-boot.
3. Install a 5.1.1 rom... reboot. Thinking of the ROM below.
4 joy??
http://forum.xda-developers.com/gal...xtrestolite-deodexed-mod-edition-1-3-t3119968
Doing a lot of reading and still not sure what TWRP to use. Any help with this? So many posts about this, its confusing.
Thank You in Advance
Click to expand...
Click to collapse
I won't tell you what ROM to choose. Yes, coincidentally I am using the Xtrestolite rom with the alliance frameworks, but I have a lot of other favorites both on TMobile as well as the International galaxy S6 or S6 Edge roms. The key is the kernel which gives you root. The International ROMs as well as the Tmobile ROMs all work with the latest Unikernel version 6. Once in a while if you run into the no call audio issues, simply flash the latest no call audio fixes. I don't have links right now but most of the OPs on these ROMs will list the no call audio patch files basically to have Tmobile as well as Canadian variants work universally. So yes, simply use Odin to install the latest OF8 bootloader and modem, which I am on. Then flash any 5.1.1 ROM of choice followed by the version 6 Unikernel and boot up. Boots can take up to 10 minutes so do't be concerned you may be bootlooping.
http://forum.xda-developers.com/gal...d-development/kernel-stockmod-kernel-t3100395 <<<<Kernel link
https://www.androidfilehost.com/?w=files&flid=36499 <<<OF8 Tmobile baseband and Bootloader Link
https://mega.co.nz/#!Fw4ThDoK!AOHWNn5b35qADDWvCGAxIU0558KE1wEng9E9w0EWxyY <<<another Tmobile firmware upgrade link
http://83ef866adfe9567e948e-8fdf342...n.com/g925t_of6_aou_twrp_recovery_v12.tar.md5 <<<Odin installable TWRP
Some users like havinnf SuperUser installed too. Here's a TWRP flashable link
Super SU (flash with twrp) : https://www.androidfilehost.com/?fid=24052804347765203

Thank you very much for the info.

highlander07422 said:
Thank you very much for the info.
Click to expand...
Click to collapse
Welcome.

One more question before i begin
If i cant boot a 5.0.2 rom after the fiware upgrade row do icheck to see if the upgrade worked and flash a 5.1.1 rom

highlander07422 said:
One more question before i begin
If i cant boot a 5.0.2 rom after the fiware upgrade row do icheck to see if the upgrade worked and flash a 5.1.1 rom
Click to expand...
Click to collapse
Odin should say pass if a successful flash. Plus use the three button method....Power, home, volume up to boot to recovery and see TWRP. Best way to do the TWRP verification is to use three button, Pwr, home, volume down and hold to get to the first bootloader screen, then when you cancel out using volume down immediately hold the powr, home, volume up to get to the twrp screen. Make sure you have a 5.1.1 ROM of choice on your Phone along with the unikernal and before you upgrade, so that you have something to flash
If you are unsure about any of this, there are a slew of FAQ's on this stuff. So make sure you fully understand what you are doing and having the files in place PRIOR to doing anything. Like all the OPs state here, I'm not responsible for anyone bricking their phone or doing anything that makes their situation a now aht do I do to fix xyz issues. As long as you have the latest Odin mentioned in various OPs here, are comfortable with the process of using ODIN, testing their setup to make sure that your phone and cable and opertaing system have proper drivers to see your phone when in download mode etc, this should not be a big deal. That said, I don't know the level of your expertise in doing this so all I can do is warn you to check and double check you have everything in place before proceeding.
http://forum.xda-developers.com/tmobile-galaxy-s6-edge/development/please-post-till-t3171637
Post #8 details install guide for Tmobile users. This whole thread is a great guide for installing firmware and a 5.1.1 ROM. I'm not making a ROM recommendation since that's a personal issue, but this is a good starting choice so you should look at this thread and possible use this as a good guide for how to do stuff, including having this ROM on board you phone as a starting point. Just offering you everything I can think of before you jump in.

Thank You So much. Im gunna go for it.

10.1 Note (2014 Edition - SM-P600) Continuously Reboots - Please HELP

Hello Everyone!
I'm stuck!!! If anyone can help, it is so appreciated!
I attempted to root my subject named device using ODIN following these directions:
http://forum.xda-developers.com/galaxy-note-10-2014/development/root-cf-auto-root-t2905495
Everything seems to go as planned until restart.. the tablet continuously reboots, over and over, but fails to load.
I have no clue what to do from here, so this is my only option... ask those who have much more knowledge than me!
Thanks in advance. I really appreciate your assistance.

That's called a bootloop. Something went wrong with flashing. What is a subject named device? That autoroot method only works for smp600 that is already running stock 5.1 or 4.4.2 . Boot into downloadmode using the appropriate buttons, then Download stock firmarwe from sammobile.Com and flash via Odin to get back a working device.

Which build are you on? If it is 5.1.1, that method will result in a bootloop if you try to root.
Use this instead
http://forum.xda-developers.com/showthread.php?p=63637426
Sent from my SM-N915G using Tapatalk

diabl0w said:
That's called a bootloop. Something went wrong with flashing. What is a subject named device? That autoroot method only works for smp600 that is already running stock 5.1 or 4.4.2 . Boot into downloadmode using the appropriate buttons, then Download stock firmarwe from sammobile.Com and flash via Odin to get back a working device.
Click to expand...
Click to collapse
The tablet is a Samsung Galaxy Note 10.1 (2014 Edition) Model SM-P600.

Not sure about the build.... but I will most definitely checkout the link you provided - thanks!
Question, can I flash a different rom rather than stock?
Also, I was just able to flash TWRP via ODIN and was able to get TWRP to load on the device. I'm hoping to flash a custom rom from the external SD via TWRP. I don't care which one at this point.. just need to get the tablet functional again and get a backup saved lol.

smoothbeaver said:
Not sure about the build.... but I will most definitely checkout the link you provided - thanks!
Question, can I flash a different rom rather than stock?
Also, I was just able to flash TWRP via ODIN and was able to get TWRP to load on the device. I'm hoping to flash a custom rom from the external SD via TWRP. I don't care which one at this point.. just need to get the tablet functional again and get a backup saved lol.
Click to expand...
Click to collapse
Here is "how to" instruction by me - post #225 for upgrade to the latest 5.1.1 and root your device. Once done and you want custom rom, just boot into twrp and flash any custom rom that you like. Let me know if you have issue.
http://forum.xda-developers.com/gal...lollipop-5-1-1-galaxy-note-10-t3239971/page23