Develop Bugs

[Q] Which One Is New?

Hi Guys,
I Found Two Firmware For p6-u06 I Am Little Confused Which One Is Latest.
1 : http://cn.club.vmall.com/forum.php?mod=viewthread&tid=182258
Version : B116SP01
Release Date : 21/8/13
2. http://cn.club.vmall.com/forum.php?mod=viewthread&tid=192149&extra=page=1
Version : B115SP04
Release Date : 10/9/13
Help Me Guys Which One I Install For Latest Firmware?

Latest firmware should be B116 - as far as I understand the Huawei firmware numbers.
Sent from my P6-U06 using xda app-developers app
---------- Post added at 08:56 PM ---------- Previous post was at 08:53 PM ----------
I guess B115SP04 is just an improvement of B115, like CM10.1.3 for CM10.1. And B116 is a higher version with maybe additional functions, like CM10.2 instead of CM10.1.
Sent from my P6-U06 using xda app-developers app

husen4u said:
Hi Guys,
I Found Two Firmware For p6-u06 I Am Little Confused Which One Is Latest.
1 : http://cn.club.vmall.com/forum.php?mod=viewthread&tid=182258
Version : B116SP01
Release Date : 21/8/13
2. http://cn.club.vmall.com/forum.php?mod=viewthread&tid=192149&extra=page=1
Version : B115SP04
Release Date : 10/9/13
Help Me Guys Which One I Install For Latest Firmware?
Click to expand...
Click to collapse
I tried that second one and it showed error .. after being updated ..

GalaxySIIII said:
I tried that second one and it showed error .. after being updated ..
Click to expand...
Click to collapse
Thanks A Lot Dear Friends.

GalaxySIIII said:
I tried that second one and it showed error .. after being updated ..
Click to expand...
Click to collapse
The second one is for the T model P6, not the U06 model, the two aren't interchangeable on firmware. You can flash the European/International or Chinese ROMs onto the U model but if you look at the firmware version they both start with the correct U branding.
e.g.
First link - P6-U00_EmotionUI_1.6_V100R001C17B116SP01.zip - OK
Second link P6-T00_EmotionUI_1.6_V100R001C01B115SP02.zip - won't work on U06 model.

amoose said:
The second one is for the T model P6, not the U06 model, the two aren't interchangeable on firmware. You can flash the European/International or Chinese ROMs onto the U model but if you look at the firmware version they both start with the correct U branding.
e.g.
First link - P6-U00_EmotionUI_1.6_V100R001C17B116SP01.zip - OK
Second link P6-T00_EmotionUI_1.6_V100R001C01B115SP02.zip - won't work on U06 model.
Click to expand...
Click to collapse
B116 Is Stable Or Not??
What You Guys Prefer B111 Or B116???

husen4u said:
B116 Is Stable Or Not??
What You Guys Prefer B111 Or B116???
Click to expand...
Click to collapse
B116 and B111 are both stable - Huawei have gone for really strange version numbering. B111 is the international ROM (comes with Google apps, no Chinese apps), B116 is the Chinese version (still English text but no Google apps unless you add them yourself and a few Chinese apps). They should have gone for I000 for international ROM numbering and C000 for Chinese or something else logical in my opinion.
For what it's worth, I'm running B116SP01 as my daily driver with no complaints. Rooted, Chinese apps removed, Google apps restored. I had some problems when I installed it by running the update from within Android but none when reflashed using the forced recovery method.

amoose said:
B116 and B111 are both stable - Huawei have gone for really strange version numbering. B111 is the international ROM (comes with Google apps, no Chinese apps), B116 is the Chinese version (still English text but no Google apps unless you add them yourself and a few Chinese apps). They should have gone for I000 for international ROM numbering and C000 for Chinese or something else logical in my opinion.
For what it's worth, I'm running B116SP01 as my daily driver with no complaints. Rooted, Chinese apps removed, Google apps restored. I had some problems when I installed it by running the update from within Android but none when reflashed using the forced recovery method.
Click to expand...
Click to collapse
Thanks A Lot Reply.
B116 Doesnt Have Gapps???? I Thr Any Other Way To Install Gapps Without Unlock Bootloader?

husen4u said:
B116 Doesnt Have Gapps???? I Thr Any Other Way To Install Gapps Without Unlock Bootloader?
Click to expand...
Click to collapse
None of the Chinese version ROMs have the Google framework - my post here lists the different version numbers and whether they're a Chinese or international release.
As long as you're rooted, it's pretty easy to get them up and running - I just backed them up from the most recent international install and restored them onto the Chinese version. If you do an upgrade from within a running international version to the Chinese one then it seems to carry your apps over anyway. I did have a few problems when I upgraded like this though and ended up doing a recovery wipe/restore to get everything behaving.
Make sure you have an .apk version of your root app manager of choice on your SD card ready to sideload after flashing then you can just restore the necessary google apps as a system app and get the Play store up and running and install everything else.

amoose said:
None of the Chinese version ROMs have the Google framework - my post here lists the different version numbers and whether they're a Chinese or international release.
As long as you're rooted, it's pretty easy to get them up and running - I just backed them up from the most recent international install and restored them onto the Chinese version. If you do an upgrade from within a running international version to the Chinese one then it seems to carry your apps over anyway. I did have a few problems when I upgraded like this though and ended up doing a recovery wipe/restore to get everything behaving.
Make sure you have an .apk version of your root app manager of choice on your SD card ready to sideload after flashing then you can just restore the necessary google apps as a system app and get the Play store up and running and install everything else.
Click to expand...
Click to collapse
Thanks A Lot For Your Reply. Really Appreciate It.
Where I Can Find B114 Version?? Is B114 Is Better Than B111??

husen4u said:
Thanks A Lot For Your Reply. Really Appreciate It.
Where I Can Find B114 Version?? Is B114 Is Better Than B111??
Click to expand...
Click to collapse
Here - it's in the Original Development section, not sure why. Personally, I found it buggy and went back to B116 - others may have had a better experience.

amoose said:
The second one is for the T model P6, not the U06 model, the two aren't interchangeable on firmware. You can flash the European/International or Chinese ROMs onto the U model but if you look at the firmware version they both start with the correct U branding.
e.g.
First link - P6-U00_EmotionUI_1.6_V100R001C17B116SP01.zip - OK
Second link P6-T00_EmotionUI_1.6_V100R001C01B115SP02.zip - won't work on U06 model.
Click to expand...
Click to collapse
thnx 4 explanation ..

amoose said:
None of the Chinese version ROMs have the Google framework - my post here lists the different version numbers and whether they're a Chinese or international release.
As long as you're rooted, it's pretty easy to get them up and running - I just backed them up from the most recent international install and restored them onto the Chinese version. If you do an upgrade from within a running international version to the Chinese one then it seems to carry your apps over anyway. I did have a few problems when I upgraded like this though and ended up doing a recovery wipe/restore to get everything behaving.
Make sure you have an .apk version of your root app manager of choice on your SD card ready to sideload after flashing then you can just restore the necessary google apps as a system app and get the Play store up and running and install everything else.
Click to expand...
Click to collapse
Hello.
It's possible to install an international rom in a T?
Thanks.

Upgade from 7.1.1 to 6.0.1

Hi All,
Yes, it's not a mistake, I need to revert one of my Swifts to 6.0.1
I applied the 'update' offered by Wileyfox, and was appalled by the changes, especially foisting Truecaller on me. Because my other Swift is still on 6.0.1, I could see what had been broken.
So, I need help to find a signed zip + instructions on how to apply it please.
I would also like to remove the 'nag' from the other Swift, mainly to make sure I don't apply the upgrade by accident.
TIA
Dave

Hi visit this site you can find some here https://cyanogenupdatetracker.com/downloads/
hope it helps.

Zetren said:
Where can one get the latest CyanogenMod?
Click to expand...
Click to collapse
The CM 13.1.5 on cyanogenupdatetracker seems to be the latest available version, alternative sites offer just 13.1.2.

Zetren said:
Thanks, I am inquiring however after CyanogenMod, not CyanogenOS.
Click to expand...
Click to collapse
CyanogenMod SHUTDOWN

The latest version is 13.1.2 for ur swift
This is it , its fastboot rom u need pc , adb
Have fun
https://www.androidfilehost.com/?fid=24694152805484750

[Custom Rom] Huawei Mate 8 - NXT-L29C432B582 - Custom System Update - ("V. 6")

[Custom Rom] Huawei Mate 8 - NXT-L29C432B582 - Custom System Update - ("V. 6")
I have merged my threads. Please look here:
https://forum.xda-developers.com/ma...mate-8-nxt-t3677961/post73901232#post73901232

ChinHon said:
[Custom Rom] Huawei Mate 8 - NXT-L29C432B582
- Custom System Update - ("V.6")
- EMUI 5.01 - Android 7 -
On TWRP backup basis.
This update replaces the [K-Rom-M8-V5].
Developed and tested on this device:
Huawei Mate 8 (NEXT)
Model number: Huawei NXT-L29
Build number: NXT-L29C432B582
- OTA updated.
- Without branding, with root and root access.
- TWRP recovery
Mods:
- Call Recorder
- KangVip Advanced settings
- Autostart administration in the phone manager (PM+)
- Viper 4 Android FX
- Obtaining OTA authorization
I couldn't test if this runs on Firmwares other regions.
I think the v6 is going on all regions on B582/592.
Quick guide for experienced users:
Please make a backup of your data with Huawei Backup and TWRP.
The Rom will be installed as if you wanted to restore a TWRP backup.
All your apps remain intact.
Conditions required:
- Firmware B582,
- TWRP recovery, (from download, or available from v5 )
- root is not necessary,
- OEM and FRP unlocked,
- USB Debugging on.
All required files are in the download folder.
You are familiar with the matter? Then let's go!
If available, uninstall these apps: SuperSu and Magisk.
A unroot is not necessary. Please do not download the downloads as "ZIP".
Installation:
1. Replace existing boot partition:
"2017-12-M8.B582.stock.kernel.boot"
copy in the TWRP backup directory to the ExtSd and restore.
2. Install update:
"2017-12-M8_B582_AdvS_Xposed_SystemUpdate"
also copy to the TWRP backup directory and restore."
3. Rooting:
- In TWRP mount Internal storage/ system,
- go to: Install, system/ k-rom/ set and install the SuperSU. zip.
- Reboot.
- After starting, take the BusyBox App from the download.
Then please use it to install its binaries.
- Install the PM+ app and bring the autostart administration to the phonemanager.
Iggnore the incompatibility warning.
Do not reboot between steps 1 to 3. Do not wipes before and after.
That's all. The installation is complete.
If Viper or Xposed have not been installed with it, this can be found in the
Advanced settings can be made up for.
Xposed is already active. In case the framework gets disabled,
in the Advanced settings. There's no way use other Xposed versions.
This also applies to SuperSU. They are not compatible with this system.
Both are optimized for this system.
Of course, you can also use Magisk to root later with the instructions
in the v5 thread. (loss of ota authorization)
Xposed does not run under magisk rooting together with the Advanced settings.
It must be used for a successful SafetyNet test, must be completely removed before rooting.
In the Kangvip Advanced settings do not use the Addblocker and "hide Activate NavBar".
Both works only on China Roms.
Hiding the NavBar can be done comfortably with the App "Tiles" from the playstore. (See v5)
In the K-Advanced Settings /tune cpu, some of the following are available.
Modifications of the computer performance possible. Those who need more power can do so.
Testing out the "Power save" options is useless. Did a lot of it.
The Huawei's own energy saving settings cannot be topped.
Good luck!
Thank you very much:
[KangVIP] (Advanced settings),
@Tecalote (SuperSU)
and Chainfire, Stephen (Stericson) + Jmz Software, Team Win RecoveryProject,
JRummy and Huawei Technologies Co., Ltd.
Hint:
Despite careful elaboration, I cannot guarantee that the execution of this manual will not cause any damage to the device or operating system and therefore I do not assume any liability for any damage or malfunction of the hardware and software! If you are still unsure, follow these steps: Follow the instructions only if you or your device is subject to any conditions (model number, Android version, etc.). Read the instructions carefully and completely, look up unknown terms. Check downloaded files for viruses. Make a backup of important settings and data. Do not follow the instructions if you do not know what you are doing.
These warnings must be logical. Please process my comments correctly.
​
Click to expand...
Click to collapse
you da man
Sent from my HUAWEI NXT-AL10 using Tapatalk

jbmc83 said:
you da man
Sent from my HUAWEI NXT-AL10 using Tapatalk
Click to expand...
Click to collapse
This rom is going really well. Especially Xposed. I haven't been able to get it that stable yet. I'm really glad I finally made it.

@jbmc83
I now have the link of the v2 you are looking for. Still interested?

ChinHon said:
@jbmc83
I now have the link of the v2 you are looking for. Still interested?
Click to expand...
Click to collapse
me

nikolas60 said:
me
Click to expand...
Click to collapse
Do you know what it's about? The link is for developers only.

ChinHon said:
@jbmc83
I now have the link of the v2 you are looking for. Still interested?
Click to expand...
Click to collapse
sure thing, lets have it that would be the HRT v2 right? would i be qualified for the link tho? im not a dev either
Sent from my HUAWEI NXT-AL10 using Tapatalk

Everyone who works on a rom is a developer!
Here the link friends.
https://pan.baidu.com/s/1bpJGYyb
It's not HRT. Should be better. Look closely at the zip, could have subdirectories.

ChinHon said:
Everyone who works on a rom is a developer!
Here the link friends.
https://pan.baidu.com/s/1bpJGYyb
It's not HRT. Should be better. Look closely at the zip, could have subdirectories.
Click to expand...
Click to collapse
ah yes, i remember that one! actually have it already, you had provided a link before still, thanks for your trouble!
apparently, there is a new chinese B593 out, although the full stock versions provided on firmware finder are not approved for installation, unfortunately... so they cant be flashed properly. still, nice to see development continuing

I'll continue, of course, because it's questionable whether we get oreo.
Has someone successfully installed my update on another region?
Please let us know.

ChinHon said:
I'll continue, of course, because it's questionable whether we get oreo.
Has someone successfully installed my update on another region?
Please let us know.
Click to expand...
Click to collapse
could get interesting next spring, maybe well have another shot at oreo then... still wondering what the heck @c|nder was up to with this thread here
https://forum.xda-developers.com/mate-8/orig-development/oreo-rom-1-0-mate-8-south-america-t3702767

jbmc83 said:
could get interesting next spring, maybe well have another shot at oreo then... still wondering what the heck @c|nder was up to with this thread here
https://forum.xda-developers.com/mate-8/orig-development/oreo-rom-1-0-mate-8-south-america-t3702767
Click to expand...
Click to collapse
How to make new roms when you can't get to the baidu downloads anymore?

ChinHon said:
How to make new roms when you can't get to the baidu downloads anymore?
Click to expand...
Click to collapse
question is rather: how to make new roms if there arent any new firmwares being developed officially?
Sent from my HUAWEI NXT-AL10 using Tapatalk

Yeah, that's an aspect too. Making a new rom after every update is somehow unproductive. Just because of the google patch? I only made my update because of the stable xposed. I only make new ones in the future if something fundamentally changes.

Any news about oreo guys?[emoji848]

.....

Wow this is great work, how about the data? Is it decrypted with this method?
(sorry for the noob question)

aaron13 said:
Wow this is great work, how about the data? Is it decrypted with this method?
(sorry for the noob question)
Click to expand...
Click to collapse
Thank you.
My rom is not encrypted. It also replaces only the boot and system partitions.
Since data remains unaffected, nothing changes. It remains as it was before installation.

ChinHon said:
Thank you.
My rom is not encrypted. It also replaces only the boot and system partitions.
Since data remains unaffected, nothing changes. It remains as it was before installation.
Click to expand...
Click to collapse
But it is rooted so titanium can be used?

aaron13 said:
But it is rooted so titanium can be used?
Click to expand...
Click to collapse
Yes!
Go with all my roms.

MIUI 12 Global EU released - V12.0.1.0.QJOEUXM

Just spotted it here - https://bigota.d.miui.com/V12.0.1.0...AGlobal_V12.0.1.0.QJOEUXM_2d4c4ea52d_10.0.zip
Linked to on this page https://www.xda-developers.com/down...ing-out-several-xiaomi-redmi-mi-poco-devices/
Just installed it on my RN9 (M2003J15SG) through the system updater
All went smoothly - on first boot the features demo was very janky, but once I skipped through that it's been fine - just exploring now

Same here
Also by normal updater

how to convert miui global to eu rom?

Eu rom
Pls. Help how to flash eu rom

corbyaki said:
Pls. Help how to flash eu rom
Click to expand...
Click to collapse
Once you've downloaded the file follow the Local Update Method described well here by @fabianowerner https://forum.xda-developers.com/showpost.php?p=83179675&postcount=8

thesoupthief said:
Once you've downloaded the file follow the Local Update Method described well here by @fabianowerner https://forum.xda-developers.com/showpost.php?p=83179675&postcount=8
Click to expand...
Click to collapse
I mean from global to eu

corbyaki said:
I mean from global to eu
Click to expand...
Click to collapse
Why on earth would you want to do that?
It's the same firmware - why adapt the wrong version to use on your phone when you can use the right one?

V12.0.2.0.QJOEUXM just dropped
Available on the page linked to in the first post

This work for M2003J15SS through the system updater?

lifecastro said:
This work for M2003J15SS through the system updater?
Click to expand...
Click to collapse
Hang on, I'm pretty sure M2003J15SS is the global version. Don't update with this firmware - this is for the EU version

thesoupthief said:
Hang on, I'm pretty sure M2003J15SS is the global version. Don't update with this firmware - this is for the EU version
Click to expand...
Click to collapse
Yes, thanks. I find the global version.

Will I get an official update from Xiaomi after installing this ROM manually?

Excuse me, how do I know if I use the global, china or eu rom? Thanks in advance

I've got the update downloaded into the correct folder but when I use the "choose update package" it gives me the option to locate with Google Drive or Flipboard!! Any idea how this has happened and how to fix it?

manuel_6154 said:
Excuse me, how do I know if I use the global, china or eu rom? Thanks in advance
Click to expand...
Click to collapse
Check either your model number or the stock ROM currently on your device
You can see both of these by going to settings > about phone > all specs
The model number is listed there, as is the current ROM
My MIUI version, for example, is
MIUI global
12.0.2Stable
12.0.2.0(QJOEUXM)
So I have the Global EU variant.
There are also Global, Chinese and Russian ROMs - could be others for all I know
My model number is M2003J15SG - this is the EU 4/128gb variant with NFC
The different models are each compatible with particular firmware variants

Vilyfian said:
Will I get an official update from Xiaomi after installing this ROM manually?
Click to expand...
Click to collapse
Yes - you're not rooting, unlocking the bootloader or anything like that, so there shouldn't be any problems later

SHC said:
I've got the update downloaded into the correct folder but when I use the "choose update package" it gives me the option to locate with Google Drive or Flipboard!! Any idea how this has happened and how to fix it?
Click to expand...
Click to collapse
Just a guess, but I think it uses whichever file explorer is set as your default (so when I go to "choose update package" it defaults to the MIUI file explorer and gives me options of internal or external storage)
Might you have uninstalled this, so it's now giving you the option of either of those apps to find your update package? Suggest you install a basic file explorer (CX or something) and do the same thing again, then opt to use that to browse to and select the update package
Or just leave it in the correct folder on your phone (is it downloaded_rom or something like that?)

i've got the Updater finding the downloaded Miui 12 file but now it won't install because it can't verify the Update. It's the correct EU version.

SHC said:
i've got the Updater finding the downloaded Miui 12 file but now it won't install because it can't verify the Update. It's the correct EU version.
Click to expand...
Click to collapse
Are you absolutely sure you shouldn't be updating with one of the other update ROMs? Maybe the global one?
If you're definitely coming from the EU Global MIUI 11, try downloading the MIUI 12 update again. Occasionally updates corrupt while downloading - guessing the installer runs a hash check before installing. Always possible that's the problem
If this doesn't help and noone else comes up with a solution, just sit tight - you'll likely get the correct update served to you sometime soon

Right file for right device - think I'll sit it out and wait as you suggest.

Question RM 6 Pro: unable to switch to Global ROM V425 using official method

I'm trying to install the Global ROM V425 using the official method given on Nubia's website, but it's not working. If anyone can help me solve the problem, I'll be so grateful!
I downloaded V425 from the official download page and copied the NX669J-update.zip file to the root directory of the phone, then tried to do the update as follows:
Settings >> System Update >> ... >> Local update >> select the file >> Only install
After about 10 seconds, I got this error:
Upgrade package and the current phone version does not match, can not be updated, please check the current version is obtained from the official channel
I'm not sure what to do now, and having seen that error message I'm now afraid that if I try any other method for the update I might brick the phone, since I've already been warned that the software is not compatible.
The current software version is NX669J_CNCommon_V7.14 and when I checked for updates I got a message telling me the current version is the latest.
Phone info...
Model: NX669J-P
Red Magic OS: V4.5
Build number: NX669J_CNCommon_V7.14
Android version: 11
Hardware version: NX669J_V1AMB
Thanks for reading and I hope you can help!
-----
UPDATE: I noticed that in the About Phone section the device name is "腾讯红魔游戏手机6Pro" which translates to "Tencent Red Magic Game Phone 6Pro".
Seems it might be the Tencent version of the phone. Could this be the reason I'm getting the error message? Is it possible to put the Global ROM on the Tencent version?

Hi,
I am originally using global version with the latest updated v4.25 rom since September and i think you are using the tencent set with CN rom installed on your device. Why would you change to global? Is it cooler with CN rom? I bet you will regret you will lose so many features that you can get on CN if you are migrating to the Global rom.

The main reason is that the phone's current ROM doesn't have Google apps/services

Is it possible to sideload Google apps onto this device with current ROM or the only way is to flash global ROM?

pstzz said:
The main reason is that the phone's current ROM doesn't have Google apps/services
Click to expand...
Click to collapse
If i am not mistaken, you can download the PlayStore from apkpure website - https://m.apkpure.com/google-play-store/com.android.vending and start to use Google application afterwards once successfully installed on the CN rom device you are using.

Thanks a lot - maybe I have been overcomplicating this issue! Will check and see if j can get it installed

pstzz said:
Thanks a lot - maybe I have been overcomplicating this issue! Will check and see if j can get it installed
Click to expand...
Click to collapse
That's fine. But some Google apps will not working at all eg like Gmail or Google Duo (i am not very sure exactly) because it still recognise your device status. You may check one by one any Google apps downloaded from the PlayStore later