[Custom Rom] Huawei Mate 8 - NXT-L29C432B582 - Custom System Update - ("V. 6") - Mate 8 Android Development

[Custom Rom] Huawei Mate 8 - NXT-L29C432B582 - Custom System Update - ("V. 6")
I have merged my threads. Please look here:
https://forum.xda-developers.com/ma...mate-8-nxt-t3677961/post73901232#post73901232

ChinHon said:
[Custom Rom] Huawei Mate 8 - NXT-L29C432B582
- Custom System Update - ("V.6")
- EMUI 5.01 - Android 7 -
On TWRP backup basis.
This update replaces the [K-Rom-M8-V5].
Developed and tested on this device:
Huawei Mate 8 (NEXT)
Model number: Huawei NXT-L29
Build number: NXT-L29C432B582
- OTA updated.
- Without branding, with root and root access.
- TWRP recovery
Mods:
- Call Recorder
- KangVip Advanced settings
- Autostart administration in the phone manager (PM+)
- Viper 4 Android FX
- Obtaining OTA authorization
I couldn't test if this runs on Firmwares other regions.
I think the v6 is going on all regions on B582/592.
Quick guide for experienced users:
Please make a backup of your data with Huawei Backup and TWRP.
The Rom will be installed as if you wanted to restore a TWRP backup.
All your apps remain intact.
Conditions required:
- Firmware B582,
- TWRP recovery, (from download, or available from v5 )
- root is not necessary,
- OEM and FRP unlocked,
- USB Debugging on.
All required files are in the download folder.
You are familiar with the matter? Then let's go!
If available, uninstall these apps: SuperSu and Magisk.
A unroot is not necessary. Please do not download the downloads as "ZIP".
Installation:
1. Replace existing boot partition:
"2017-12-M8.B582.stock.kernel.boot"
copy in the TWRP backup directory to the ExtSd and restore.
2. Install update:
"2017-12-M8_B582_AdvS_Xposed_SystemUpdate"
also copy to the TWRP backup directory and restore."
3. Rooting:
- In TWRP mount Internal storage/ system,
- go to: Install, system/ k-rom/ set and install the SuperSU. zip.
- Reboot.
- After starting, take the BusyBox App from the download.
Then please use it to install its binaries.
- Install the PM+ app and bring the autostart administration to the phonemanager.
Iggnore the incompatibility warning.
Do not reboot between steps 1 to 3. Do not wipes before and after.
That's all. The installation is complete.
If Viper or Xposed have not been installed with it, this can be found in the
Advanced settings can be made up for.
Xposed is already active. In case the framework gets disabled,
in the Advanced settings. There's no way use other Xposed versions.
This also applies to SuperSU. They are not compatible with this system.
Both are optimized for this system.
Of course, you can also use Magisk to root later with the instructions
in the v5 thread. (loss of ota authorization)
Xposed does not run under magisk rooting together with the Advanced settings.
It must be used for a successful SafetyNet test, must be completely removed before rooting.
In the Kangvip Advanced settings do not use the Addblocker and "hide Activate NavBar".
Both works only on China Roms.
Hiding the NavBar can be done comfortably with the App "Tiles" from the playstore. (See v5)
In the K-Advanced Settings /tune cpu, some of the following are available.
Modifications of the computer performance possible. Those who need more power can do so.
Testing out the "Power save" options is useless. Did a lot of it.
The Huawei's own energy saving settings cannot be topped.
Good luck!
Thank you very much:
[KangVIP] (Advanced settings),
@Tecalote (SuperSU)
and Chainfire, Stephen (Stericson) + Jmz Software, Team Win RecoveryProject,
JRummy and Huawei Technologies Co., Ltd.
Hint:
Despite careful elaboration, I cannot guarantee that the execution of this manual will not cause any damage to the device or operating system and therefore I do not assume any liability for any damage or malfunction of the hardware and software! If you are still unsure, follow these steps: Follow the instructions only if you or your device is subject to any conditions (model number, Android version, etc.). Read the instructions carefully and completely, look up unknown terms. Check downloaded files for viruses. Make a backup of important settings and data. Do not follow the instructions if you do not know what you are doing.
These warnings must be logical. Please process my comments correctly.
​
Click to expand...
Click to collapse
you da man
Sent from my HUAWEI NXT-AL10 using Tapatalk

jbmc83 said:
you da man
Sent from my HUAWEI NXT-AL10 using Tapatalk
Click to expand...
Click to collapse
This rom is going really well. Especially Xposed. I haven't been able to get it that stable yet. I'm really glad I finally made it.

@jbmc83
I now have the link of the v2 you are looking for. Still interested?

ChinHon said:
@jbmc83
I now have the link of the v2 you are looking for. Still interested?
Click to expand...
Click to collapse
me

nikolas60 said:
me
Click to expand...
Click to collapse
Do you know what it's about? The link is for developers only.

ChinHon said:
@jbmc83
I now have the link of the v2 you are looking for. Still interested?
Click to expand...
Click to collapse
sure thing, lets have it that would be the HRT v2 right? would i be qualified for the link tho? im not a dev either
Sent from my HUAWEI NXT-AL10 using Tapatalk

Everyone who works on a rom is a developer!
Here the link friends.
https://pan.baidu.com/s/1bpJGYyb
It's not HRT. Should be better. Look closely at the zip, could have subdirectories.

ChinHon said:
Everyone who works on a rom is a developer!
Here the link friends.
https://pan.baidu.com/s/1bpJGYyb
It's not HRT. Should be better. Look closely at the zip, could have subdirectories.
Click to expand...
Click to collapse
ah yes, i remember that one! actually have it already, you had provided a link before still, thanks for your trouble!
apparently, there is a new chinese B593 out, although the full stock versions provided on firmware finder are not approved for installation, unfortunately... so they cant be flashed properly. still, nice to see development continuing

I'll continue, of course, because it's questionable whether we get oreo.
Has someone successfully installed my update on another region?
Please let us know.

ChinHon said:
I'll continue, of course, because it's questionable whether we get oreo.
Has someone successfully installed my update on another region?
Please let us know.
Click to expand...
Click to collapse
could get interesting next spring, maybe well have another shot at oreo then... still wondering what the heck @c|nder was up to with this thread here
https://forum.xda-developers.com/mate-8/orig-development/oreo-rom-1-0-mate-8-south-america-t3702767

jbmc83 said:
could get interesting next spring, maybe well have another shot at oreo then... still wondering what the heck @c|nder was up to with this thread here
https://forum.xda-developers.com/mate-8/orig-development/oreo-rom-1-0-mate-8-south-america-t3702767
Click to expand...
Click to collapse
How to make new roms when you can't get to the baidu downloads anymore?

ChinHon said:
How to make new roms when you can't get to the baidu downloads anymore?
Click to expand...
Click to collapse
question is rather: how to make new roms if there arent any new firmwares being developed officially?
Sent from my HUAWEI NXT-AL10 using Tapatalk

Yeah, that's an aspect too. Making a new rom after every update is somehow unproductive. Just because of the google patch? I only made my update because of the stable xposed. I only make new ones in the future if something fundamentally changes.

Any news about oreo guys?[emoji848]

.....

Wow this is great work, how about the data? Is it decrypted with this method?
(sorry for the noob question)

aaron13 said:
Wow this is great work, how about the data? Is it decrypted with this method?
(sorry for the noob question)
Click to expand...
Click to collapse
Thank you.
My rom is not encrypted. It also replaces only the boot and system partitions.
Since data remains unaffected, nothing changes. It remains as it was before installation.

ChinHon said:
Thank you.
My rom is not encrypted. It also replaces only the boot and system partitions.
Since data remains unaffected, nothing changes. It remains as it was before installation.
Click to expand...
Click to collapse
But it is rooted so titanium can be used?

aaron13 said:
But it is rooted so titanium can be used?
Click to expand...
Click to collapse
Yes!
Go with all my roms.

Related

[ROOT] [GUIDE] (OFFLINE) OTADelusion Online Root for Asus FonePad 7 / K00E / ME372CG

*** OTADelusion is no longer available ***
Use fastboot flash update instead - guide.
Code:
[B]*** Disclaimer[/B]
If you wish to follow the instructions in this post, you agree that -
* Your warranty is void.
* I do not offer any guarantees that this will work or that it won't cause any
bad side effects.
* You alone are responsible for any damages or other issues that may arise
directly or indirectly because of this.
This has undergone basic testing on multiple devices running supported ROMs, but
again, there are no guarantees. Use it at your own risk.
In particular, OTA updates have not been tested on rooted devices.
Introduction
What Is This?
The FonePad 7 has a very secure stock ROM that is not vulnerable to any known exploit. But fortunately for us, Asus introduced their own vulnerability in it, which we can take advantage of. This is a guide that will help you root your FonePad 7 using that vulnerability.
How Does It Work?
Overplayed, Cool-Sounding Version
OTADelusion exploits multiple critical security vulnerabilities in the over-the-air update mechanism employed by the FonePad 7 -
The update delta packages are delivered to the device through an unencrypted medium.
The device can be configured to use any DNS server and it does not verify DNS query responses.
The package verification process relies on an asymmetric key-pair whose private key is compromised.
A man-in-the-middle attack is performed while downloading an OTA update by forcing the device to use a rogue DNS server which directs the device to connect to a rogue web server. This web server serves malicious update packages with forged cryptographic signatures. These update packages are designed to install a permanent backdoor in the device, allowing the user full access to it.
Down-To-Earth Version
Someone at Asus forgot the 'S' in 'HTTPS'
Someone at Asus forgot to replace the test Android signing key with their own
1 + 2 = Pwnage
What Do I Need To Use It?
A FonePad 7 running a supported version of the stock ROM (check the section below for a list of supported versions)
A working Wi-Fi connection (this will NOT work on 2G or 3G)
Supported ROM Versions
Go to Settings -> About tablet and check the "Build number" field
3.2.2 - NOT supported. Upgrade to 3.2.4
3.2.4 - Supported (WW and TW)
5.1.6 - NOT supported. I need volunteers to help me test.
5.2.2 - Supported (WW)
5.2.5 - NOT supported. May be added in the future. Check this thread for updates.
Click to expand...
Click to collapse
Installation Instructions
Follow these steps -
Read the disclaimer at the top of this post.
Make sure you're connected to a WiFi connection, NOT 2G/3G.
Go to Settings -> About tablet -> System Update and check for updates.
When you see the update prompt, select "NO"
Go to Settings -> Apps -> scroll to the "All" tab -> CMClient
Press the "Force Stop" button
Press the "Clear Data" button
Repeat the above steps with DMClient in the Apps list
Go to Settings -> WiFi -> long press on your network -> Modify Network and follow these steps -
Set IP Settings to "Static"
Note down the values of DNS 1 and DNS 2 somewhere.
Set DNS 1 to <snip>
Make DNS 2 blank
At this point, your Internet connection will stop functioning correctly. This is intended and temporary.
Repeat step 3. If it shows an error, reboot and repeat this step.
Make sure you get an update called "OTADelusion".
Download and install the update.
After reboot, go back to WiFi settings and restore the previous values of DNS 1 and DNS 2.
You now have root. Enjoy! But also be careful - there is currently no way to de-brick this device if you screw up.
Click to expand...
Click to collapse
Changelog
v0.2 - February 27, 2014
Added v5.2.2 WW.
Works on v3.2.4 WW, v3.2.4 TW, v5.2.2 WW.
v0.1 - January 24, 2014
Initial version.
Works on v3.2.4 WW and TW.
Click to expand...
Click to collapse
Thanks To/Credits
Code:
* XDA members (in alphabetical order) d0p3d, eagleofdeath13, fabiocr, Fuad.kh,
Lord Childe and MEHRDAD595, for testing.
* Chainfire, for SuperSU.
* Asus, for leaving one last security hole.
Status
Running an update server costs actual money, so I won't be able to keep it running indefinitely. I expect to be able to keep it running through 2014 at least, but there are no guarantees. It can go offline at any time. The address mentioned may also change at times. This post will be updated if that happens. Server taken down because there is now an offline method.
Current Server Status: Offline
Thanks for the hard work man, hope you are able to solve the other versions as well. :good:
Hey, just a thinking. If Asus can update the "update" app, maybe you can too, and then send any updates (and modification) you want, no?
If it's possible, we have a big posibility in here i think
eagleofdeath13 said:
Hey, just a thinking. If Asus can update the "update" app, maybe you can too, and then send any updates (and modification) you want, no?
If it's possible, we have a big posibility in here i think
Click to expand...
Click to collapse
It's certainly possible, but a much cleaner solution would be to get a working recovery. The bootloader is locked, but it looks like it's not encrypted. There may be a way to make it accept a custom recovery.
But we need someone who's willing to take the risk of possible bricking and test the recovery on their device.
I think that it could be a good idea to open one of our devices, to see if there's some JTAG (or thing like that) to have a fully trustable backup option.
after rooting my ME372CG, can it download upgrading package automatically and upgrade to newer version firmware?
thanks.
qianw said:
after rooting my ME372CG, can it download upgrading package automatically and upgrade to newer version firmware?
Click to expand...
Click to collapse
It hasn't been tested yet. I would suggest you don't, at least until somebody else confirms that it works.
I do suspect that there is some code in the OTA package that triggers a ROM verification in the bootloader, but I'm not sure.
Either way, if somebody's willing to take the risk, let me know. I can make a modified update package that should reduce the risk of bricking.
Hi, Dr. Psycho
Thank you for your quick reply.
I am using 5.2.2 firmware, so need to waiting for next rooting opportunity..
BTW, after rooting, if can't download upgrading package automatically, is there any way to flash the package manually (if i can download it from somewhere)?
Dr. Psycho said:
It hasn't been tested yet. I would suggest you don't, at least until somebody else confirms that it works.
I do suspect that there is some code in the OTA package that triggers a ROM verification in the bootloader, but I'm not sure.
Either way, if somebody's willing to take the risk, let me know. I can make a modified update package that should reduce the risk of bricking.
Click to expand...
Click to collapse
qianw said:
BTW, after rooting, if can't download upgrading package automatically, is there any way to flash the package manually (if i can download it from somewhere)?
Click to expand...
Click to collapse
The only way is to do what I'm doing with this guide. You'll need to run a fake DNS server and a web server and fool the tablet into downloading your package. If you're on the latest version of the stock ROM, you'll need to either patch the DMClient app or install a self-signed CA certificate (not through Settings, you'll need to copy it to /system).
This thread has a lot of information for those interested, especially in the last ten or so pages: http://forum.xda-developers.com/showthread.php?t=2514714
EDIT: Just realized you might talking about official updates. Those will be downloadable and installable, but we don't know if it'll work. It might brick your device.
What I wrote above was for custom mods.
This will all become much easier if we get a working recovery.
Yes, I mean official ROM upgrading after rooting. Sorry for the confusing.
I am waiting for Android 4.4, I don't know when Asus can release it for ME372CG. I don't want rooting affect ROM upgrading in the future.
Your answer is quite clear, thanks!
Dr. Psycho said:
The only way is to do what I'm doing with this guide. You'll need to run a fake DNS server and a web server and fool the tablet into downloading your package. If you're on the latest version of the stock ROM, you'll need to either patch the DMClient app or install a self-signed CA certificate (not through Settings, you'll need to copy it to /system).
This thread has a lot of information for those interested, especially in the last ten or so pages: http://forum.xda-developers.com/showthread.php?t=2514714
EDIT: Just realized you might talking about official updates. Those will be downloadable and installable, but we don't know if it'll work. It might brick your device.
What I wrote above was for custom mods.
This will all become much easier if we get a working recovery.
Click to expand...
Click to collapse
Hello all!!!
Dr. Psycho, I confirm your solution is working!!!!.... Thank you very much... I bought the device today, based on your solution to root the phone... Thank you again...
Theodore
Thanks! working great here
I noticed that some JP (as opposed to WW and TW) FonePad 7 users are trying to use my server to root. The JP version isn't supported yet (I didn't even know it existed). I can add it if someone with the JP version could help me get some values from their device. It'll only take a couple of minutes. Send me a private message if you're interested.
To check if you're using the JP version, go to Settings -> About tablet and check the "Build number" field. It should say "JP" somewhere in the middle.
Botto00 rooted the original Fonepad and made it Flash capable. There are several Flash browsers (Photon, Flashfox, Puffin), but because the Flash stream is redirected it's not a good viewing experience. I was wondering If you had any plans to incorporate Flash in your rooting method? I've already taken advantage of your root and maybe it's too late anyhow.
Lord Childe said:
I was wondering If you had any plans to incorporate Flash in your rooting method?
Click to expand...
Click to collapse
Have you tried this?: http://forum.xda-developers.com/showthread.php?t=1931699
Lord Childe said:
I've already taken advantage of your root and maybe it's too late anyhow.
Click to expand...
Click to collapse
If I did come up with patches or ROMs, already having root would't be a problem at all. It shouldn't be too hard to make an app that instructs the bootloader to flash a package like DMClient does. Even if it turns out to be difficult, with root access, I can easily hijack the update-checking mechanism with a self-signed CA certificate and a web server, similar to how we're achieving root right now.
I did in fact have plans to make a recovery or at least an app that would act like a minimalistic recovery and let you flash recovery packages. The problem is, I'd need either a test device or a daring volunteer. And time too - I don't have much of that right now.
Dr. Psycho said:
Have you tried this?: http://forum.xda-developers.com/showthread.php?t=1931699
If I did come up with patches or ROMs, already having root would't be a problem at all. It shouldn't be too hard to make an app that instructs the bootloader to flash a package like DMClient does. Even if it turns out to be difficult, with root access, I can easily hijack the update-checking mechanism with a self-signed CA certificate and a web server, similar to how we're achieving root right now.
I did in fact have plans to make a recovery or at least an app that would act like a minimalistic recovery and let you flash recovery packages. The problem is, I'd need either a test device or a daring volunteer. And time too - I don't have much of that right now.
Click to expand...
Click to collapse
I quite understand time limitations working on stuff like this - I think everyone appreciates the time and effort you've spent on rooting Fonepad 7.
I followed the procedure in the link. Unfortunately, it doesn't work... maybe that fix is for machines that still support Flash.
Would I dare to volunteer? Hmm... now that I've got root I don't think I would risk it.
Lord Childe said:
I followed the procedure in the link. Unfortunately, it doesn't work... maybe that fix is for machines that still support Flash.
Click to expand...
Click to collapse
I'll give it a try when I get my tablet back and see if I can get it to work.
Lord Childe said:
Would I dare to volunteer? Hmm... now that I've got root I don't think I would risk it.
Click to expand...
Click to collapse
I don't blame you. I wouldn't suggest testing unless you really don't care if you brick the tablet.
thumbs up for 5.2.2 :highfive:
USB OTG
Hi, i know this is not the right tread to ask but since there is not forum about our tablet i'll ask here. I have a fonemap 7 ME372GC the 4 GB version (witch by the way doesn't appear on Asus page) and i'm not able to use usb OTG. Is this not possible on our tablets or does mine have something wrong? I have 5.22 rom version andoid 4.3. I use an OTG cable witch is working on my HTC One
Thank you for your help
Let's root it again
Hi Dr. Psycho,
I just got a Asus fonepad 7 model: k00E (ME372CG) and I will put some more data about this device:
- Firmware version: 54.2F
- Android version: 4.2.2
- Baseband version: 1338G_1.12.0_0913
- Kernel version : 3.4.34-00006-gc3b491f
[email protected] #1
Fri Sep 13 21:24:31 CST 2013
- Build number: JDQ39.WW_epad-V3.2.1-20120913
000053_201307241030
It seems as this is the older version of the build then 3.2.4 but it is well WW.
Should I upgrade to version 3.2.4 (and can you explain me how to do this but still to avoid ASUS upgrading to even newest version) or may I try to update this "OTADelusion" update directly with this "old" build number following the instructions ?
And is there any risk of bricking my device with rooting following this method as you stated that there is no way to de-brick Asus fonepad 7 yet ?
Or is there any other (older and safer) way to root this older build version except this "OTADelusion" ?
Thanks in advance !
Cheers !

[ROM] Stock Deodexed *Official* -- 3.10.605.7 -- 11/3/15

Standard Disclaimer:
I am not responsible for anything that may happen to your device.
Features:
Android 5.1 Lollipop
Official M9 - 3.10.605.7 - Verizon base
Deodexed - Latest oat2dex.jar v0.83
BusyBox - Latest v1.23.2
Rooted/SuperSU - Latest v2.46
Added Stock Power Saving Mode
Enabled All Quick Settings Tiles
Enabled Tethering
Enabled USB Tethering
Enabled Glove Mode
Enabled Alarms in Silent Mode
Enabled External SD Write Permissions
HTC Browser - Download Path Support
Xposed Framework Support
All Applications Up-To-Date
Download:
v2.0
https://www.androidfilehost.com/?fid=24269982086987778
v1.0
https://www.androidfilehost.com/?fid=24052804347799261
Installation Instructions:
Please Note: You will need to flash the required firmware (3.10.605.7) in DOWNLOAD MODE prior to flashing this ROM.
You must be S-OFF | Bootloader unlocked and with a custom recovery - preferably TWRP
1. Download ROM and confirm MD5 matches
2. Flash stock official Android 5.1 - 3.10.605.7 firmware. Download HERE
3. Reboot into Recovery
4. Full Wipe: Dalvik Cache, Cache, Data, System
5. Install ROM
6. Reboot (First Boot may take up to 10-30 Minutes) - optimizing apps takes awhile
Changelog:
v2.0
Based off VZW OTA 3.10.604.7
v1.0
Based off VZW OTA 2.6.605.15
Bugs/Issues:
None
Please let me know
Thanks:
HTC
dotatt
svadev
chainfire
beyond compare
notepad++
Guys - If you like the ROM, consider donating! It's always appreciated.
Developers, I am releasing this ROM as a free for all base. You are more than welcome to build a ROM off of it, share it with your friends, whatever you like. Sharing is caring.
XDA:DevDB Information
Official Stock Deodexed Verizon OTA 3.10.605.7, ROM for the Verizon HTC One (M9)
Contributors
andybones
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: 3.10.605.7
Based On: 3.10.605.7 Official Verizon Base
Version Information
Status: Stable
Current Stable Version: v1.0
Stable Release Date: 2015-11-03
Created 2015-08-22
Last Updated 2016-01-22
Donation Appreciation
edmslave
MODs
Remove WiFi Nag
Remove Power Saver Notification
Saved3
Many thanks, works brilliantly. One minor tweak I would suggest is removing the 10 count self destruct on bad pin/patterns. It's the only thing I changed other than removing some unwanted apps.
l7777 said:
Many thanks, works brilliantly. One minor tweak I would suggest is removing the 10 count self destruct on bad pin/patterns. It's the only thing I changed other than removing some unwanted apps.
Click to expand...
Click to collapse
I would have but wanted to keep this 100% stock.
MODs like this are in my FluentROM
andybones said:
I would have but wanted to keep this 100% stock.
MODs like this are in my FluentROM
Click to expand...
Click to collapse
Understood. I wasn't sure what you were considering stock vs modified since you enabled things like tethering/power save/sd write permissions. No problem though, it's easily fixed. Thanks again!
l7777 said:
Understood. I wasn't sure what you were considering stock vs modified since you enabled things like tethering/power save/sd write permissions. No problem though, it's easily fixed. Thanks again!
Click to expand...
Click to collapse
Makes sense. What I tried to do was add what I felt everyone would use.
Some people may like the 10 count thing.. I sure wouldn't but, hey to each their own.
HTC Fetch
Does anyone have an HTC Fetch, and if so does it work for them on the M9?
I have one but it doesn't work on M9 although HTC says it should.. works perfect on my M8..
I noticed that motion launch features aren't available as the system wants me to enter a PIN for the SIM card.
sgtslaughter64 said:
I noticed that motion launch features aren't available as the system wants me to enter a PIN for the SIM card.
Click to expand...
Click to collapse
That sounds strange. Neither myself nor tester had this issue.
Anyone else able to confirm?
No issue with motion launch here.
sgtslaughter64 said:
I noticed that motion launch features aren't available as the system wants me to enter a PIN for the SIM card.
Click to expand...
Click to collapse
I think that app just got pushed to the play store. Did you just update it?
Sent from my Nexus 6 using Tapatalk
dottat said:
I think that app just got pushed to the play store. Did you just update it?
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
I'm 99.9% sure I included the updated version in the ROM.
Could try deleting the .apk from system and reinstalling
system/priv-app/EasyAccessService.apk
This is the error message I was getting when trying to tap and wake up my phone.
sgtslaughter64 said:
This is the error message I was getting when trying to tap and wake up my phone.
Click to expand...
Click to collapse
Very strange. Does ur sim have a pin on it or something?
Try deleting the app outta system and then installing from Playstore
Never had a sim lock. Tried uninstall and reinstall with no luck.
sgtslaughter64 said:
Never had a sim lock. Tried uninstall and reinstall with no luck.
Click to expand...
Click to collapse
Very strange, some M8 users having same issue.
http://forum.xda-developers.com/htc-one-m8/help/motion-launch-unavailable-update-to-2-t2897295
Ant xhance you can up just the wifi nag disable?
aer0zer0 said:
Ant xhance you can up just the wifi nag disable?
Click to expand...
Click to collapse
Sure can, flash in recovery.

[03/15/2017] [ROM] [N910PVPS4DQB3] [100% Stock, DeOdexed N910PVPS4DQB3]

100% Stock, DeOdexed N910PVPS4DQB3​With GSM Support!​Now with Rom Control! ​
First Off About Me:
First off, Let me state, I'm a full-time construction worker and also a full-time Dad. I'm not a Dev, like the peeps I learned from. So don't expect this Rom to get massive updates or often updates. My main purpose of this Rom is to deliver a Newer Stock Base for anyone to play with. But I do intend on adding small basic updates, as this interest me as a hobby! Thank You for your understanding, and Enjoy!
About ROM
Warning: This ROM is ONLY for the Sprint SM-N910P!!! DO NOT FLASH THIS ROM ON ANY OTHER MODEL!!! If you do then you are on your own! Know what you are doing before flashing and modifying your phone!!! You have been Warned!! I am not responsible for your phone breaking or blowing up!!
It has come to my attention that not everyone would want Root or Any customizations. So what I did was supply a True 100% Stock Deodexed QB3 Rom with NO Mods, Except for being Knox and Its-On Free. You can use it alone or as a base to flash my other mods!!
Version: 2.0
This is a "100% stock" build with no custom mods!
Fully deodexed framework and system apps
Removed Knox
Removed ItsOn
Zip-Aligned
100% Stock Kernel
Software version: N910PVPS4DQB3
Kernel: Official Samsung N910PVPS4DQB3
ROM Features
This ROM will stay 100% STOCK besides above mentions. So this Rom could be used as a base for anyone who chooses. I do plan on releasing some minor updates of my own but They will be listed below!
Changelog
v2.0 Stock Released 03/15/2017
ADD-ON Features!
Heres a little bit about what add-ons I have so far! No big write up on them, they are self explaining!
1. GSM zip: Makes Rom work with GSM service! Removes some cdma stuff from CSC files. Removes unneeded apps. Replaces apns and build.prop edits.
2. Mods zip: This installs all the modded framwork files. (ex. Advanced power menu, Open Once/Always) This one will get updated time to time, as I add stuff!! SEE POST 2 FOR MORE INFO!!
3. Root zip: Installs Systemless SuperSU and Systemless Busybox.
4. Hidden Apps: Restores Hidden Apps. (For Sprint only)
Flashing instructions:
Before you flash this rom you should be on the N910PVPS4DQB3 firmware. Specifically the bootloader and modem. You can get that HERE! Flash it with ODIN!
Also, You need a custom recovery to Flash this Rom!
***Before you flash this rom, please make sure your battery has at least 30% charge***​
OK... Lets begin!
1. Download the rom and all the other mods you want!
2. Check the MD5!!! Use a MD5 checksum tool on your pc or phone (Google is your friend)
3. Copy the downloaded files to your phone's internal storage or micro-sd card
4. Backup anything you need to backup from your internal storage and copy it to your pc or sd-card
5. Reboot to TWRP custom recovery. Do "Advanced Wipe" options and wipe Dalvick-Cache, System, Data, and Cache. I also advise deleting /Android directory from Internal storage and SD card!
6. Install the rom!
7. Dont Reboot If Installing any Mods.
8. Install Mods in this Order following ROM:
a. GSM FIX(If your using GSM) or Hidden Apps Fix(If Sprint)
b. MODS ZIP!
c. ROOT ZIP!
9. REBOOT!!
10. The initial boot process will take around 12 minutes. Please be patient. It WILL boot.
11. The phone might reboot once from SuperSU.
12. Once you reach the setup wizard proceed as usual and setup your phone.
13. You're done! Enjoy!!
Credits
Without the following people NONE of this would be possible. Period.
In no particular order!
@SuperR. for his awesome kitchen, @Chainfire for root and SuperSU, @iBotPeaches for apktool, @JesusFreke for smali/baksmali tools, and @asc1977 & @edzamber & @tdunham for all their amazing collection of guides!
Also @tx_dbs_tx, @carlosggb, @SaintZ93, @hsbadr, @osm0sis, @freeza, @ianmb, @LMMT, @samep, and @wantedman76 for all their work that I've learned much from! And SO Many more here at XDA!
Thank You All !!​
DOWNLOADS
(Click the link below)
Stock, DeOdexed N910PVPS4DQB3 - v2
MD5: e4d9ef38aefb76eb362cec8e2d9947fe
MODS
See Post 2!
Rom Control
See Post 3!
I need this confirmed! Please report!
Contribited By: aaron74
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: N910PVPS4DQB3_N910PSPT4DQB3_N910PVPS4DQB3_HOME
Based On: Stock N910PVPS4DQB3
Created 2017-03-06
Edited 2017-05-01
Add-on mods downloads!
1. GSM Fix!
2. Systemless Busybox&Root Mod!
3. MODS ADD-ON Zip:
Includes the following mods so far:
Advanced Power Menu
Remove Permanet Notifications
Once/Always Default App Selection
Hot Spot Mod included!
4. Hidden Apps!
Rom control!
A great Dev @ROBERT CM made a Rom Control for our stock roms.
Goto his Thread below to Download and don't forget to Thank him and leave him a reply!
Here's his Main Thread!
Here's the Current Rom Control Post!
I also need this tested, please let me know it works!
Thank you, & Enjoy!
Nice!
Thanks @aaron74 I know we've had some requests for latest rooted stock ROM.
This sounds like what they're looking for. With developers leaving and Note 4 closing in on EOL, this device needs more developers. Best wishes for success and your endeavor to learning more.
Sent from my SM-N920P using Tapatalk
Good job! Thanks for sharing your work with the community.
Sent from my SM-N920P using Tapatalk
@samep @LMMT
I hope I can spend the time I'd like to on it.
But Thanks for your support !
any screenshots
أرسلت من SM-N930V بإستخدام تاباتلك
If someone tries adding the hotspot in, can you please let us know how it works?
alisaeed072 said:
any screenshots
أرسلت من SM-N930V بإستخدام تاباتلك
Click to expand...
Click to collapse
I can add some.
I didn't because it's just stock.
lmcmann said:
If someone tries adding the hotspot in, can you please let us know how it works?
Click to expand...
Click to collapse
I'm working on it.
Thank you for sharing. Downloading now.
Thank you for taking time from your schedule in real life to contribute to the xda and for keeping note 4 THE best phone available to date . I was just wondering if you would know how to fix the root switch barrier i have come accross when trying to load pokemon app , when i was on stock pk1 odexed i used root switch app to disable root and i played the game fine using flygps with this build and being deodexed when i try to do the same it fails , first the gps says cannot be found thats because im using mock location app and second pokemon app itself tells me it cannot authenticate the account im guessing cause it cannot pass the safety net test, so my question is ...is it a easy fix or is it something that would take weeks of work if it is dont even bother buddy ill just roll back to my backup its no biggie but if its easy i'd like to keep this build and have the pokemon working thanks.
bigbabo said:
Thank you for taking time from your schedule in real life to contribute to the xda and for keeping note 4 THE best phone available to date . I was just wondering if you would know how to fix the root switch barrier i have come accross when trying to load pokemon app , when i was on stock pk1 odexed i used root switch app to disable root and i played the game fine using flygps with this build and being deodexed when i try to do the same it fails , first the gps says cannot be found thats because im using mock location app and second pokemon app itself tells me it cannot authenticate the account im guessing cause it cannot pass the safety net test, so my question is ...is it a easy fix or is it something that would take weeks of work if it is dont even bother buddy ill just roll back to my backup its no biggie but if its easy i'd like to keep this build and have the pokemon working thanks.
Click to expand...
Click to collapse
Thanks!
But No I wouldn't have a clue about that. I'm not quite that talented yet. Ive just started learning some of the more technical stuff about modding.
If you do find out the possible fix, I'd be more than happy to incorporate it into the rom!
Thanks!
Edit: I'm just taking a stab in the dark here, but since we're dealing with root. I'm wondering if it has anything to do with su.d or system less root or dmverity.
What exact rom were you on when it worked?
I'm not home right now, but try extracting the stock kernel from the qb3 firmware.
Flash it then flash Super su again.
Then try the root switch.
Let me know if that does anything?
bigbabo said:
Thank you for taking time from
Click to expand...
Click to collapse
I managed to put together a fix to try. I'm just quessing but this will let me rule out if its related to the kernel.
Its stock PK1 Kernel (all i have on phone right now).
Download it,
Uninstall the Root switch app.
Flash the kernel zip. Reboot!
Then install Root switch.
Let me know if it works. :fingers-crossed:
EDIT- SEE Post BELOW!!
Pokeman and snapchat won't work with root... Not rom related.
Sent from my SM-N910P using Tapatalk
kaos420 said:
Pokeman and snapchat won't work with root... Not rom related.
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
Thanks for the info!!
kaos420 said:
Pokeman and snapchat won't work with root... Not rom related.
Click to expand...
Click to collapse
I didnt say with root i said when i turn root off using the app it worked fine so did the samsung pay as well ,i know that while root is active it wouldnt work
---------- Post added at 05:31 PM ---------- Previous post was at 05:28 PM ----------
aaron74 said:
Thanks!
But No I wouldn't have a clue about that. I'm not quite that talented yet. Ive just started learning some of the more technical stuff about modding.
If you do find out the possible fix, I'd be more than happy to incorporate it into the rom!
Thanks!
Edit: I'm just taking a stab in the dark here, but since we're dealing with root. I'm wondering if it has anything to do with su.d or system less root or dmverity.
What exact rom were you on when it worked?
I'm not home right now, but try extracting the stock kernel from the qb3 firmware.
Flash it then flash Super su again.
Then try the root switch.
Let me know if that does anything?
Click to expand...
Click to collapse
Im on pl1 build stock rooted odexd, all i did is odined pl1 and root it nothing else been done to it i will try what u recommended see if that works
---------- Post added at 05:36 PM ---------- Previous post was at 05:31 PM ----------
aaron74 said:
I managed to put together a fix to try. I'm just quessing but this will let me rule out if its related to the kernel.
Its stock PK1 Kernel (all i have on phone right now).
Download it,
Uninstall the Root switch app.
Flash the kernel zip. Reboot!
Then install Root switch.
Let me know if it works. :fingers-crossed:
EDIT- SEE Post BELOW!!
Click to expand...
Click to collapse
I can post screeny of the safety net so you can see what message comes up when i turn root off on my setup and i can play pokemon and than ill take one of the safety net with your rom maybe that will give you some details ,once again im not applying any pressure on you at all like i said before its no biggie i was just wondering if it could be something simple than why not have the latest rom and still be able to play pokemon
These are from my own setup stock pl1 build stock everything root turned off is green turned on is red im going to upload screenies on your rom in different post so i dont confuse you and after than ill try the fix you suggested .
bigbabo said:
These are from my own setup stock pl1 build stock everything root turned off is green turned on is red im going to upload screenies on your rom in different post so i dont confuse you and after than ill try the fix you suggested .
Click to expand...
Click to collapse
You are running stock kernel right?
And also, you are NOT running xposed?
This is the only way i know to get Safetynet green.
The dev from Magisk is working real hard to let us keep root on for Safetynet Passing, but on the xposed side we still have that big problem.
carlosggb said:
You are running stock kernel right?
And also, you are NOT running xposed?
This is the only way i know to get Safetynet green.
The dev from Magisk is working real hard to let us keep root on for Safetynet Passing, but on the xposed side we still have that big problem.
Click to expand...
Click to collapse
No xposed just stock everything like if i took ota and than rooted it than i use root switch app and turn root off and voila pokemon works like im not rooted but on this build when i turn root off with that app and try the pokemon it doesnt work so im about to try to flash the pk1 kernel with this new build and see if that works

[ROM] TeleNougat V4.5

TeleNougat V4.5 for Sprint
@tdunham managed to get the stock deodexed Nougat rom which is based on the Sprint QC5 7.0 Nougat Note 5. I have everything tweaked in this rom specifically for the s6+ Sprint users.
"Features:
- Pre-Rooted with Magisk
- Hotspot enabled
- Knox Removed
- ItsOn Removed
- Extra Toggles added
- MSL disabled in ##DATA menu"
- S8 Apps:
Calculator/Calendar/Camera/Clock/Contacts/DownloadUi/Email/Galaxyapps/Gallery/Launcher feat. Hello Bixby/Lockscreen/Phone/SamsungInterent/Messages/Music/MyFiles/Phone/Video/Voicerecorder
Known Issues
1. language settings inside of Language and Input fc. (the issue is in systemui if someone wants to play around with it, may not get fixed anytime soon since no one really changes it from english anyway.
2. Hello Bixby app (uncheck video to not get a fc)
3. Night Clock and AOD doesnt work (due to kerne)
ROM INFO
Since this is stock based, everything Sprint related works. (prl, profile update, wifi calling, voicemail)
Personally prefer you to be on QC5 everything first (check general section in you need help odin to Nougat stock.)
Fresh wiped phone is always preferred before installing roms.
Flashing tutorial if needed:
1. Grab a cold one. (Key step)
2. Boot into twrp and WIPE SYSTEM, dalvik cache, cache in TWRP before flashing
3. Flash rom
4. Reboot
*dont forget that Android 7.0 is API 24 which means XPOSED will not work, there isn't an unofficial or official build for it yet.*
Rom Links:
V2 TeleNougat_V2Final4/20
V3 TeleNougat_V3
V4 TeleNougatV4_4/27Build
V4.5 TeleNougat4.5
V4.5 changelog: since noone has been complaing about the test 4.5, here it is. Bixby is pretty much perfect (if fc, clear data/cache for the app) + a few sammy updates (NOTHING MAJOR FROM 4)
V4 changelog: updated ALL SAMSUNG APPS, added samsung members, samsung flow, reminder app, added media ui sounds for rom, Galaxy themes fixed, briefing tab in Bixby working, bootscreen, few edits in build prop.
V3 changelog: updated touchwiz, calendar, clock app, s8 ringtones & media, calculator, phone app, shealth root fix, etc from S8 port base.
V2 changelog: NewStuffAddons is now built in, debloated system, s8 lockscreen, more stock features in stock mms app, no fc for device maintenance (smart manager), 3mini battery/clock, etc.
V1 changelog: Stock Deodexed
Credits:
@SuperR. for the rom kitchen and his ongoing support
@topjohnwu For Magisk root"
@tdunham for deox rom
@Jacobh25 for S8 apps, etc
SlidderG3, MorganTaylor, and others for troubleshooting and help
For discussion and updates join https://telegram.me/n7ton920p
“I don’t always drink, but when I do, I prefer dark liq”
https://www.paypal.com/cgi-bin/websc...=QJDY6W6PGBEAJ
Reserved
RESERVED
Everything is working great. I dirty flashed, though, being on QC5 already is why I did. Saved time from setting everything back up again.
Yuwei01 said:
Everything is working great. I dirty flashed, though, being on QC5 already is why I did. Saved time from setting everything back up again.
Click to expand...
Click to collapse
Glad to hear, yea if you are already on nougat, i usually only wipe /system in twrp since im flashing another system that way all my settings still there and its a lil cleanier to me. But lemme know how battery life is after a day or 2.
your file only 137 kb
SM-G928P_QC5_Deodexed_v1.1.zip"]SM-G928P_QC5_Deodexed_v1.1.zip
your file only 137 kb, i can not download your file in china ,can you upload it to mega or google drive
@bihailantian655
They are both on mediafire. They are 1.65GB and 70mb for the addon
Others have it downloaded already (the links are good, i just rechecked them) , try refreshing? Or redownloading.
thank very much. testing
l have tried two different pc and two vpn. :crying:137kb :crying:
Just Curious?
Do you think there's a possibility of something like this being ported over to the standard galaxy s6 (SM-G920P). I just happened to stumble upon this while doing some google searches.
even i have flashed the 70m file still .can not use data and shealth
AlienMerc said:
Do you think there's a possibility of something like this being ported over to the standard galaxy s6 (SM-G920P). I just happened to stumble upon this while doing some google searches.
Click to expand...
Click to collapse
I doubt it, though you could try, ive never messed with s6 Devices 920P.
Question to OP or anyone who would like to give feedback: If I Backup my Stock-Rooted(SU) in TWRP, then decided to use this ROM, and then also Backup this Rom. Should there be any issues on going back and fourth between the 2? Thanks in advance to anyone willing to give me feedback on this!
SprintBama said:
Question to OP or anyone who would like to give feedback: If I Backup my Stock-Rooted(SU) in TWRP, then decided to use this ROM, and then also Backup this Rom. Should there be any issues on going back and fourth between the 2? Thanks in advance to anyone willing to give me feedback on this!
Click to expand...
Click to collapse
No I didn't have any issues when I'd swapped backups. :good:
Custom Rom QC5
Yuwei01 said:
Everything is working great. I dirty flashed, though, being on QC5 already is why I did. Saved time from setting everything back up again.
Click to expand...
Click to collapse
Do I have to be rooted to flash this ROM ? I am on Stock QC5 .
Thanks.
Mulzac said:
Do I have to be rooted to flash this ROM ? I am on Stock QC5 .
Thanks.
Click to expand...
Click to collapse
Yes, if you install twrp without rooting with the Magisk-v12.0 zip. Stock recovery will replace twrp recovery at least it did for me. If you try to install this Rom without root in twrp I believe your get a not rooted error. You could try it? And also that Rom is prerooted FYI.
Is there a way to add Avatar for sent messages? I tried frash install and still no luck
Great Rom, Thank you!
SM-G928P Custom NougatFirmware G928PVPU3DQC5
drewiskee said:
RESERVED
Click to expand...
Click to collapse
I flashed the ROM and everything is working great, but how do I get rid of Sprint Hands Free Activation in the installed GT Idoneapps.
When I click on Samsung DM Manager all I get is :" idoneapps is granted super user rights. No permissions to enter OMADM Hidden menu"
Thanks Again .......great rom
Mulzac said:
I flashed the ROM and everything is working great, but how do I get rid of Sprint Hands Free Activation in the installed GT Idoneapps.
When I click on Samsung DM Manager all I get is :" idoneapps is granted super user rights. No permissions to enter OMADM Hidden menu"
Thanks Again .......great rom
Click to expand...
Click to collapse
what are you trying to do exactly?
Maybe that will help me. I clicked it and it said the same for me
So far so good. Is there any way to disable the data usage stats on pull down? I have unlimited and don't need it. It will just bug me. Thanks a bunch
EDIT: I figured this one out myself. I am including the change in case anyone else wants the data stats removed from quick settings.
1) use ES File explorer or another root explorer.
2) copy others.Xml from "system/ csc"
3) change permissions (not sure if needed but just to be safe)
4) edit others.xml. Near bottom are the new entries for mod and I just changed <CscFeature_SystemUI_SupportDataUsageViewOnQuickPanel>FALSE</CscFeature_SystemUI_SupportDataUsageViewOnQuickPanel>. Was originally true.
5) copy over the existing file
6) reboot
7) profit.
Thanks for Rom. can't wait to get it just the way I want.
drewiskee said:
Glad to hear, yea if you are already on nougat, i usually only wipe /system in twrp since im flashing another system that way all my settings still there and its a lil cleanier to me. But lemme know how battery life is after a day or 2.
Click to expand...
Click to collapse
The Rom hasn't had a battery drain impact in anyway for me. Thanks again it's running buttery smooth.

Stock Rom T835 [ARK4] DeKnoxed

hello,
I made this TWRP flashable zip from December ARK4 Samsung firmware, using SuperRKitchen. It's deKnoxed and untouched apart from the lightest of debloated apps. Everything else is untouched and as per Samsung firmware. No root is included or any other mods or additions. I made this for myself, but offer it here for any interested parties. I'm not a dev, script warrior or ROM master. Just a guy with a T835. I was already on ARK4, but I include the ARK4 vendor image if you need to flash in twrp. It's v4 as it took me 3 attempts to make it! You just need to flash Magisk and/or Modesty Kernel if you want.
ROM - https://drive.google.com/open?id=14CokHkIahzI_Rk3OR2TgErqy8bgVF9br
ARK4 Vendor image: https://drive.google.com/open?id=1dgV-KDBZw7EeCnWcHozR-vx4oKdNG7Ee
Modesty Kernel: https://forum.xda-developers.com/galaxy-tab-s4/development/kernel-modesty-0-99-4-t3856088
Magisk: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
I don't get my tab s4 until tomorrow, but I'd like to thank you for making this. I know I'll end up using this when I inevitably screw up using one of the roots or debloats.
simcop2387 said:
I don't get my tab s4 until tomorrow, but I'd like to thank you for making this. I know I'll end up using this when I inevitably screw up using one of the roots or debloats.
Click to expand...
Click to collapse
You're welcome. It's a great tablet. My first Samsung device after nexus' - very impressed with this tab
do You think this will work on a 830 and :
could you give step by step how to install it.
thanks
marvinc said:
do You think this will work on a 830 and :
could you give step by step how to install it.
thanks
Click to expand...
Click to collapse
I'm not sure - but would think it doesn't. You can try though, just back up before you do and restore if not
To flash ROM you'll need TWRP installed. https://forum.xda-developers.com/ga.../recovery-twrp-3-2-3-1-galaxy-tab-s4-t3843211.
Once TWRP is installed and working, wipe system, data etc
Then flash the ROM zip
Flash kernel & Magisk if you require
Thank you OP! Can you please help me understand, what does deknoxed mean? I know Knox is Samsung security, but what would deknoxed be? Less bloat or some functional advantage?
Removing the knox app that may inhibit root manger or interfering with system apps. It
Thank you for your efforts. Having rooted I had a rigmarole to go thru to apply this update. It was so easy, just flashed with TWRP and I still had root, TWRP, and all my apps data and settings.
I hope that you will do the same for further firmware updates as they come out.
Again thanks for your efforts!
Are you doing Pie version as well?
THanks
Sure, as soon as the sammobile site as th UK firmware I'll dig one out
There is one for Hong Kong and one Unknown. Are you able to provide some basic instructions on how to brew the custom firmware please?
Thanks
All links are not working. Does anybody have mirror on this ROM or another ROM based on Android 8 for TWRP?

Categories

Resources