I need help please, because I can't get my new prestigio 4500T turn on.
I first did the CWM recovery in this site, androidforum.cz/pro-pap4500t-dc-1-2ghz-s-jb-4-1-1-t38976.html
and it was all ok.
But then I wanted to remove the CWM recovery of my phone, because I had some problem updating my phone to the new rom because of it,
and I went to the same program I installed CWM recovery, Smart Phone Flash Tool, and I put the same scatter file I used to install, and instead of clicking on download I clicked Format, and then format whole flash, because it was there that I would take CWM recovery of my phone.
Now I can't turn my phone on, when I connect usb at pc, it connects and disconnects a lot of times. I even tried to do the same steps to download the CWM recovery on my phone but in SP Flash Tool I get this error: BROM ERROR: S_DL_GET_DRAM_SETTING_FAIL (5054)
[HINT]: Please check your load matches to your target which is to be downloaded.
I don't know what to do and please Help me. Thanks
Nobody answers? Please can anybody help me?
ddqgarces said:
I need help please, because I can't get my new prestigio 4500T turn on.
I first did the CWM recovery in this site, androidforum.cz/pro-pap4500t-dc-1-2ghz-s-jb-4-1-1-t38976.html
and it was all ok.
But then I wanted to remove the CWM recovery of my phone, because I had some problem updating my phone to the new rom because of it,
and I went to the same program I installed CWM recovery, Smart Phone Flash Tool, and I put the same scatter file I used to install, and instead of clicking on download I clicked Format, and then format whole flash, because it was there that I would take CWM recovery of my phone.
Now I can't turn my phone on, when I connect usb at pc, it connects and disconnects a lot of times. I even tried to do the same steps to download the CWM recovery on my phone but in SP Flash Tool I get this error: BROM ERROR: S_DL_GET_DRAM_SETTING_FAIL (5054)
[HINT]: Please check your load matches to your target which is to be downloaded.
I don't know what to do and please Help me. Thanks
Click to expand...
Click to collapse
You messed up boot file.Try to find original boot.img here on XDA and try to flash it via PC,or find original stock rom for flashing via SPFlashTool try that
jaskooo said:
You messed up boot file.Try to find original boot.img here on XDA and try to flash it via PC,or find original stock rom for flashing via SPFlashTool try that
Click to expand...
Click to collapse
Thanks for your help, I have a boot.img of the stock rom, I put in the same folder of MT6577_Android_scatter_emmc and CheckSum.ini , but when I try to download via SP flash tool I get this error:
Image Bootimg checksum failed! Checksum reference value (0x5583) in the config.ini file.
Please re-fill correct checksum values in checksum.ini.
I don't know what are the checksum values, can you tell me where i can find these values?
I am getting this DRAM error, because I don't have the correct files to flash in SP flash tool.
Please can you give me all those files needed to put a whole new firmware in y phone, I need the preloader file, and etc.
My phone can't detect preloader, as it did, and I can't boot it, it's like dead, only appears a red light when I connect to pc and a MTk USB Port (COM).
Please help me with the files needed to flash my whole phone in sp flash tool
Need full ROM with scatter file
Hi Guys, I am looking for full ROM including scatter file for PAP4500T. I need it to load all needed (Preloader, MBR, EBR1, UBOOT, BOOTIMG, RECOVERY, SEC_RO, LOGO, EBR2, ANDROID, CACHE, USRDATA) in to the SP Flash Tool. It can be from Stock or any working ROM. If You could provide me Working ROM with all these and with scatter file which will load everithink to the SPflashTool I would really appreciate that.
Thank You in advance.
My device(Nubia z11 minis) is hard bricked, i think its a dead bootloader, my computer detects device at 9008(old I think) port no partition of device is visible. I tried Qfil and Nubia studio tool both fail with error Qfil gave me Sahara error couldn't communicate with flash programmer
While Nubia tool gave me file not found error. I need help to fix.
Device has no led
Does anybody here knows about MPRG8953.Mbn
And 8953_msimage.mbn
Nikhil Joshi said:
My device(Nubia z11 minis) is hard bricked, i think its a dead bootloader, my computer detects device at 9008(old I think) port no partition of device is visible. I tried Qfil and Nubia studio tool both fail with error Qfil gave me Sahara error couldn't communicate with flash programmer
While Nubia tool gave me file not found error. I need help to fix.
Device has no led
Click to expand...
Click to collapse
Ok. Folder with raw image (where is rawprogram abd mbn file) should be in root of c: partition.
Also, try miflash if qfil fails
Already tried it's no use
Found a solution but i need two file MPRG8953.mbn and 8953_msimage.mbn
https://gizchina.it/2017/01/nubia-z11-mini-s-unbrick-nubia-studio-tool/
Послато са NX549J уз помоћ Тапатока
Nikhil Joshi said:
Found a solution but i need two file MPRG8953.mbn and 8953_msimage.mbn
Click to expand...
Click to collapse
i want it too.
Anyone try this link?
China or Global ROM?
https://drive.google.com/file/d/1uBnrVo_TfIa8iUWrDGr7j90SojFEs-4z/view
and
https://drive.google.com/file/d/1wM1ymz9CRArNcmqaIjlVZbrWOlis0VqJ/view
My phone is blinking when connected to my system, but no display, no recovery mode.. its just blink.. none of the side keys responded to boot menus/ fastboot menus..
i followed instructions, its getting patched through qfil tool, but still the same problem. phone is not booting to normal.
any clue will help to recovey my phone...
WARNINGS:
Keep your backup files safe and secure ! If you can, encrypt them.
If you try to flash in "firmware upgrade" mode, bootloader will be LOCKED again !
Never try to flash in "format all" mode ! Otherwise, you will LOSE all secure and identifying infos for your device. Like IMEI and MAC.
Never try to share your backups or your security and privacy will be compromised.
USE AT YOUR OWN RISK. I AM NOT RESPONSIBLE FOR YOUR ACTIONS.
Did you have any other error not mentioned here ?
Just attach the screenshot of the error and explain some what you did to get this error and we will try to help.
Good luck !
Error: "LIB DA not match"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are facing this issue, you have three solutions for that error:#1. Try on Linux.#2. Download an older version of the SP Flash Tool. See "Alternative Downloads" in this guide: https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4229937/#3. Uncheck "LIB DA match" in the Options. Check step #10 of this guide: https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4229937/
Error: "PMT changed for the ROM"
Firstly, NEVER try to flash in "format all" mode !Otherwise, you will LOSE all secure and identifying infos for your device. Like IMEI and MAC.If you are facing "PMT changed" message, your device has an older scatter file inside it.This is because there is any modification to the scatter file you are using to the scatter file used before.There are some minor changes from scatter file of the MIUI 11 to the scatter file of MIUI 12, but nothing significant. You can ignore it.You have two solutions for that error:#1. Use the same scatter file present on the device.#2. Flash using "firmware upgrade" mode and a new PMT will be written.But, if you flash using "firmware upgrade" mode, bootloader will be LOCKED again and userdata will be ERASED.If you want, you can backup the state of unlocked bootloader BEFORE the "firmware upgrade" and then restore it after.Just follow this guide before the "firmware upgrade": https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4220013/
Error: "STATUS_BROM_CMD_STARTCMD_FAIL"
Just simple try to boot/reboot your device.Once is enough.It will refresh the download/EDL mode.
Error: "STATUS_SEC_AUTH_FILE_NEEDED"
If you are facing this error, you are trying to flash using EDL mode.Firstly, try to flash in download mode and not in EDL mode.Just connect the powered off device without press any key.If you want to flash in EDL mode, you need to bypass authentication.Just follow this guide: https://forum.xda-developers.com/t/...d-flash-in-edl-with-no-auth-for-free.4229679/
Error: "STATUS_BROM_CMD_FAIL"
If you are facing this error, you are trying to flash using EDL mode.Firstly, try to flash in download mode and not in EDL mode.Just connect the powered off device without press any key.If you want to flash in EDL mode, you need to bypass authentication.Just follow this guide: https://forum.xda-developers.com/t/...d-flash-in-edl-with-no-auth-for-free.4229679/
Error: "STATUS_BROM_CMD_SEND_DA_FAIL"
Just use the properly DA (Download-agent) file for MERLIN devices.Here you can find DA files for MERLIN: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4209765/
Error: "STATUS_EXT_RAM_EXCEPTION"
Firstly, NEVER try to flash in "format all" mode !Otherwise, you will LOSE all secure and identifying infos for your device. Like IMEI and MAC.If you are facing "EXT RAM Exception" message, probably your device is DEAD or uncompatible with ROM variant.Just Flash using the "FIRMWARE UPGRADE" mode and your device will be alive again.If you flash using "firmware upgrade" mode, bootloader will be LOCKED again and userdata will be ERASED.If you want, you can backup the state of unlocked bootloader BEFORE the "firmware upgrade" and then restore it after.Just follow this guide before the "firmware upgrade": https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4220013/
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4225163/
Hi @VD171
I've tried u'r method for Error: "STATUS_EXT_RAM_EXCEPTION"
but still my devices wont turn on. Do you have any suggestion?
langithitam said:
Hi @VD171
I've tried u'r method for Error: "STATUS_EXT_RAM_EXCEPTION"
but still my devices wont turn on. Do you have any suggestion?
Click to expand...
Click to collapse
Did you flash the original stock MIUI again using the FIRMWARE UPGRADE mode?
VD171 said:
Did you flash the original stock MIUI again using the FIRMWARE UPGRADE mode?
Click to expand...
Click to collapse
Yes i did. I even flash the global & chinese ROM, but still gave me that error message
langithitam said:
Yes i did. I even flash the global & chinese ROM, but still gave me that error message
Click to expand...
Click to collapse
So, I'm not sure.
You need to keep trying everything you can.
That's just an ocasionally error.
Hi guys, i flashed with sp flash tool but i failed formating all and now i dont have IMEI
Now i just read your advice
Otherwise, you will LOSE all secure and identifying infos for your device. Like IMEI and MAC.
What can i do now? I am in 12.0.8 and cant unlock bootloader because i cant add miui account and cant use the phone because google verification..
I now what my imei is because i have the box of the phone can i do something?
Thx for the help
Montaal said:
Hi guys, i flashed with sp flash tool but i failed formating all and now i dont have IMEI
Now i just read your advice
Otherwise, you will LOSE all secure and identifying infos for your device. Like IMEI and MAC.
What can i do now? I am in 12.0.8 and cant unlock bootloader because i cant add miui account and cant use the phone because google verification..
I now what my imei is because i have the box of the phone can i do something?
Thx for the help
Click to expand...
Click to collapse
You need to recover your imei writing that using modem meta and engineering room.
Good luck
Hi, I'm a MediaTek LTD and MediaTek Inc engineer.
I will remain anonymous using my son's account.
MediaTek MT6765 has a problem with DRAM when flashing with generic DA library. This makes the error STATUS_EXT_RAM_EXCEPTION to appear on SP flash tool. We provide the generic DA libs for development-only instances, but the companies like Xiaomi make modifications to the Scatter and DA lib file. This is the solution:
1. Download fastboot rom for your device (not the recovery one, it should weight 3 - 4GB)
2. Unpack it
3. Open SP Flash Tool, go to Options > General and deactivate CHECK LIB DA MATCH
4. Now load the DA file from the rom of your device
5. Load the Scatter file from the rom of your device
6. Select Firmware Upgrade mode
7. Start download
8. Connect your device with a USB cable (disconnected battery) and enter into MTK Flash Mode
Solved!
Sincerely
An unknown engineer from MediaTek Engineering Department
XdaInsiderAndDev said:
Hi, I'm a MediaTek LTD and MediaTek Inc engineer.
I will remain anonymous using my son's account.
MediaTek MT6765 has a problem with DRAM when flashing with generic DA library. This makes the error STATUS_EXT_RAM_EXCEPTION to appear on SP flash tool. We provide the generic DA libs for development-only instances, but the companies like Xiaomi make modifications to the Scatter and DA lib file. This is the solution:
1. Download fastboot rom for your device (not the recovery one, it should weight 3 - 4GB)
2. Unpack it
3. Open SP Flash Tool, go to Options > General and deactivate CHECK LIB DA MATCH
4. Now load the DA file from the rom of your device
5. Load the Scatter file from the rom of your device
6. Select Firmware Upgrade mode
7. Start download
8. Connect your device with a USB cable (disconnected battery) and enter into MTK Flash Mode
Solved!
Sincerely
An unknown engineer from MediaTek Engineering Department
Click to expand...
Click to collapse
Thank you very much for your contribution.
I love MediaTek
Thanks, I will be providing source-code of new lines of SoC to the community. I really love the possibility to customize your Android and it's not fair that MediaTek is not providing source code officially. I will see if I can do more for more MTK devices.
Note: Originally we used SP Flash Tool to flash stock software, now that we don't use it anymore, we gave it to you but I didn't remember they included the option CHECK LIB DA MATCH for you to not be able to modify the stock software DRAM values. Sorry for that.
And I love how the community always find a way to customize their Androids.
XdaInsiderAndDev said:
Thanks, I will be providing source-code of new lines of SoC to the community. I really love the possibility to customize your Android and it's not fair that MediaTek is not providing source code officially. I will see if I can do more for more MTK devices.
Note: Originally we used SP Flash Tool to flash stock software, now that we don't use it anymore, we gave it to you but I didn't remember they included the option CHECK LIB DA MATCH for you to not be able to modify the stock software DRAM values. Sorry for that.
And I love how the community always find a way to customize their Androids.
Click to expand...
Click to collapse
Thank you for the opportunity to know a little about the technical part.
We rarely have this chance, as it depends on its own experience and generosity in sharing.
XdaInsiderAndDev said:
Hi, I'm a MediaTek LTD and MediaTek Inc engineer.
I will remain anonymous using my son's account.
MediaTek MT6765 has a problem with DRAM when flashing with generic DA library. This makes the error STATUS_EXT_RAM_EXCEPTION to appear on SP flash tool. We provide the generic DA libs for development-only instances, but the companies like Xiaomi make modifications to the Scatter and DA lib file. This is the solution:
1. Download fastboot rom for your device (not the recovery one, it should weight 3 - 4GB)
2. Unpack it
3. Open SP Flash Tool, go to Options > General and deactivate CHECK LIB DA MATCH
4. Now load the DA file from the rom of your device
5. Load the Scatter file from the rom of your device
6. Select Firmware Upgrade mode
7. Start download
8. Connect your device with a USB cable (disconnected battery) and enter into MTK Flash Mode
Solved!
Sincerely
An unknown engineer from MediaTek Engineering Department
Click to expand...
Click to collapse
here the same error persists
Hi people thankyou for everything but the issue is not solved. Error: "STATUS_EXT_RAM_EXCEPTION" The same error is coming again and again. Mobile REALME C11 Purchased 2020. Tried ROMS { REALME_C11_RMX2185_11_A.109_220801 --- REALME_C11_2021_RMX3231_11.A.87_202208171849 --- RMX2185_11_A.69_200812} Mobile in red state.
My bootloader was unlocked before But I thought I should lock it again so I use this post (https://c.realme.com/in/post-details/1365228796868915200)
Commands {
- Enter the command: adb reboot bootloader
- Press “Enter” on your keyboard
- Enter the command: fastboot flashing lock
- Press “Enter” on your keyboard
}
There is a catch after that there I use one extra command fastboot reboot
After that I am just surfing the internet. Approx all methods I tried. Please Help
XdaInsiderAndDev said:
Thanks, I will be providing source-code of new lines of SoC to the community. I really love the possibility to customize your Android and it's not fair that MediaTek is not providing source code officially. I will see if I can do more for more MTK devices.
Note: Originally we used SP Flash Tool to flash stock software, now that we don't use it anymore, we gave it to you but I didn't remember they included the option CHECK LIB DA MATCH for you to not be able to modify the stock software DRAM values. Sorry for that.
And I love how the community always find a way to customize their Androids.
Click to expand...
Click to collapse
hello sir, i want to disable check lib da in sptool console mode but i can't find any solution its still throwing me check lib da match error even i turn it off in option in sptool
XinextialMatrix said:
hello sir, i want to disable check lib da in sptool console mode but i can't find any solution its still throwing me check lib da match error even i turn it off in option in sptool
Click to expand...
Click to collapse
As I know, in console mode is, if not impossible, very hard to do that, however I would have to talk with my friend which helped in the creation of SP Flash Tool (known as flash_tool internally).
All I can recommend is using the latest version available on the web and running it in Windows 10 21H1 or above, as administrator and using the GUI for disabling CHECK LIB DA MATCH, unfortunately, I can't provide flash_tool for linux because of my contract.
if you are still facing this message STATUS_EXT_RAM_EXCEPTION format running 0 prcent, it may your emmc is corrupted,
XdaInsiderAndDev said:
Hi, I'm a MediaTek LTD and MediaTek Inc engineer.
I will remain anonymous using my son's account.
MediaTek MT6765 has a problem with DRAM when flashing with generic DA library. This makes the error STATUS_EXT_RAM_EXCEPTION to appear on SP flash tool. We provide the generic DA libs for development-only instances, but the companies like Xiaomi make modifications to the Scatter and DA lib file. This is the solution:
1. Download fastboot rom for your device (not the recovery one, it should weight 3 - 4GB)
2. Unpack it
3. Open SP Flash Tool, go to Options > General and deactivate CHECK LIB DA MATCH
4. Now load the DA file from the rom of your device
5. Load the Scatter file from the rom of your device
6. Select Firmware Upgrade mode
7. Start download
8. Connect your device with a USB cable (disconnected battery) and enter into MTK Flash Mode
Solved!
Sincerely
An unknown engineer from MediaTek Engineering Department
Click to expand...
Click to collapse
I don't see the DA file in my fastboot rom, could it be called something else
VD171 said:
WARNINGS:
Keep your backup files safe and secure ! If you can, encrypt them.
If you try to flash in "firmware upgrade" mode, bootloader will be LOCKED again !
Never try to flash in "format all" mode ! Otherwise, you will LOSE all secure and identifying infos for your device. Like IMEI and MAC.
Never try to share your backups or your security and privacy will be compromised.
USE AT YOUR OWN RISK. I AM NOT RESPONSIBLE FOR YOUR ACTIONS.
Did you have any other error not mentioned here ?
Just attach the screenshot of the error and explain some what you did to get this error and we will try to help.
Good luck !
Error: "LIB DA not match"
If you are facing this issue, you have three solutions for that error:#1. Try on Linux.#2. Download an older version of the SP Flash Tool. See "Alternative Downloads" in this guide: https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4229937/#3. Uncheck "LIB DA match" in the Options. Check step #10 of this guide: https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4229937/
Error: "PMT changed for the ROM"
Firstly, NEVER try to flash in "format all" mode !Otherwise, you will LOSE all secure and identifying infos for your device. Like IMEI and MAC.If you are facing "PMT changed" message, your device has an older scatter file inside it.This is because there is any modification to the scatter file you are using to the scatter file used before.There are some minor changes from scatter file of the MIUI 11 to the scatter file of MIUI 12, but nothing significant. You can ignore it.You have two solutions for that error:#1. Use the same scatter file present on the device.#2. Flash using "firmware upgrade" mode and a new PMT will be written.But, if you flash using "firmware upgrade" mode, bootloader will be LOCKED again and userdata will be ERASED.If you want, you can backup the state of unlocked bootloader BEFORE the "firmware upgrade" and then restore it after.Just follow this guide before the "firmware upgrade": https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4220013/
Error: "STATUS_BROM_CMD_STARTCMD_FAIL"
Just simple try to boot/reboot your device.Once is enough.It will refresh the download/EDL mode.
Error: "STATUS_SEC_AUTH_FILE_NEEDED"
If you are facing this error, you are trying to flash using EDL mode.Firstly, try to flash in download mode and not in EDL mode.Just connect the powered off device without press any key.If you want to flash in EDL mode, you need to bypass authentication.Just follow this guide: https://forum.xda-developers.com/t/...d-flash-in-edl-with-no-auth-for-free.4229679/
Error: "STATUS_BROM_CMD_FAIL"
If you are facing this error, you are trying to flash using EDL mode.Firstly, try to flash in download mode and not in EDL mode.Just connect the powered off device without press any key.If you want to flash in EDL mode, you need to bypass authentication.Just follow this guide: https://forum.xda-developers.com/t/...d-flash-in-edl-with-no-auth-for-free.4229679/
Error: "STATUS_BROM_CMD_SEND_DA_FAIL"
Just use the properly DA (Download-agent) file for MERLIN devices.Here you can find DA files for MERLIN: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4209765/
Error: "STATUS_EXT_RAM_EXCEPTION"
Firstly, NEVER try to flash in "format all" mode !Otherwise, you will LOSE all secure and identifying infos for your device. Like IMEI and MAC.If you are facing "EXT RAM Exception" message, probably your device is DEAD or uncompatible with ROM variant.Just Flash using the "FIRMWARE UPGRADE" mode and your device will be alive again.If you flash using "firmware upgrade" mode, bootloader will be LOCKED again and userdata will be ERASED.If you want, you can backup the state of unlocked bootloader BEFORE the "firmware upgrade" and then restore it after.Just follow this guide before the "firmware upgrade": https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4220013/
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4225163/
Click to expand...
Click to collapse
Sir, can you help me?
My phone is Redmi Note 9 Merlin. I initially experienced a bootloop after updating the ROM via twrp, then I tried to unbrick it using the MTK Auth Bypasstool and FlashTool. When using FlashTool, I got the error "Sp Flash Tool Error : Status_Ram_Exception (0xC0050005)" so I tried the method from the beginning, namely using MTK Auth Bypasstool, but it didn't work. My phone won't even turn on. I really ask for your help
RogerRedminote9 said:
Sir, can you help me?
My phone is Redmi Note 9 Merlin. I initially experienced a bootloop after updating the ROM via twrp, then I tried to unbrick it using the MTK Auth Bypasstool and FlashTool. When using FlashTool, I got the error "Sp Flash Tool Error : Status_Ram_Exception (0xC0050005)" so I tried the method from the beginning, namely using MTK Auth Bypasstool, but it didn't work. My phone won't even turn on. I really ask for your help
Click to expand...
Click to collapse
lol, my phone just out off battery
XdaInsiderAndDev said:
Hi, I'm a MediaTek LTD and MediaTek Inc engineer.
I will remain anonymous using my son's account.
MediaTek MT6765 has a problem with DRAM when flashing with generic DA library. This makes the error STATUS_EXT_RAM_EXCEPTION to appear on SP flash tool. We provide the generic DA libs for development-only instances, but the companies like Xiaomi make modifications to the Scatter and DA lib file. This is the solution:
1. Download fastboot rom for your device (not the recovery one, it should weight 3 - 4GB)
2. Unpack it
3. Open SP Flash Tool, go to Options > General and deactivate CHECK LIB DA MATCH
4. Now load the DA file from the rom of your device
5. Load the Scatter file from the rom of your device
6. Select Firmware Upgrade mode
7. Start download
8. Connect your device with a USB cable (disconnected battery) and enter into MTK Flash Mode
Solved!
Sincerely
An unknown engineer from MediaTek Engineering Department
Click to expand...
Click to collapse
Everything works, you saved my phone! Thank you very much and good luck to everyone !!