My Device Details :
Device : Lenovo P2a2
Bootloader : Unlocked
OS: Stock Android N 7.0
Recovery : TWRP
After Erasing modemst1 , modemst2 while flashing ROM, my device Baseband has been lost.. to recover baseband i have tried to flash everything in stock ROM files.. after flashing everything, my device is dead now (Hard Brick) there is no Recovery, no fastboot, only indicating RED LED while charging, is there any tool or any idea to recover my device? i have attached an log file to this thread & while connecting to pc there is a driver is installing ( Qualcomm HS-USB QDLoader 9008 ) . . it's screen shot also attached.
You can try put twrp or rom to external sd card and pray it works.
There is guides on google you can try. If all fail just take it to repair.
yea google 9008 + qfil and hope for the best
heatfire said:
yea google 9008 + qfil and hope for the best
Click to expand...
Click to collapse
all solutions are not related to Lenovo P2...
Kiryo24 said:
You can try put twrp or rom to external sd card and pray it works.
There is guides on google you can try. If all fail just take it to repair.
Click to expand...
Click to collapse
"You can try put twrp or rom to external sd card"
what do you mean by this?. if you mean Install recovery by copying in sdcard, how i can install it? because installing recovery via fastboot, to install it there is no other way, because there is no fastboot , Recovery...
Sangeeth Mk said:
"You can try put twrp or rom to external sd card"
what do you mean by this?. if you mean Install recovery by copying in sdcard, how i can install it? because installing recovery via fastboot, to install it there is no other way, because there is no fastboot , Recovery...
Click to expand...
Click to collapse
I just quickly read there is way to make sdcard bootable and i just speculate that maby phone reads and boots stock rom/recovery from ext sd card if booting from inner memory fails.
Kiryo24 said:
I just quickly read there is way to make sdcard bootable and i just speculate that maby phone reads and boots stock rom/recovery from ext sd card if booting from inner memory fails.
Click to expand...
Click to collapse
ok!
Thread cleaned up.
Please lets stay on topic. There is no need for trolls whatsoever.
If you can't answer the question asked by the OP, you can just move on to another thread. No need to be abusive whatsoever.
Thanks!
Regards
Vatsal,
Forum Moderator.
gl
Hi, I have exactly the same issue, has anybody managed to find a solution?
Try the below link for possible options in adb.
https://googleweblight.com/i?u=http...sue=267&page=6&type=1&grqid=VbDqgFEZ&hl=en-IN
Also please check out the video :
https://www.youtube.com/watch?v=sZXOJTGH8og
This was for ZUK1. But it should also work with P2. You just need to find the Raw stock firmware image.
The stock Firmware is also available here:
https://mega.nz/#!3hhhhRYC!bDbs1VGHA7s0n-uH-B30fVDsulFRVw-ZbYTvheS9m8I
QFIL did not work as it requires firehose file, which is unavailable for P2.
senseijtitus said:
Try the below link for possible options in adb.
https://googleweblight.com/i?u=http...sue=267&page=6&type=1&grqid=VbDqgFEZ&hl=en-IN
Also please check out the video :
https://www.youtube.com/watch?v=sZXOJTGH8og
This was for ZUK1. But it should also work with P2. You just need to find the Raw stock firmware image.
The stock Firmware is also available here:
https://mega.nz/#!3hhhhRYC!bDbs1VGHA7s0n-uH-B30fVDsulFRVw-ZbYTvheS9m8I
Click to expand...
Click to collapse
senseijtitus said:
Try the below link for possible options in adb.
https://googleweblight.com/i?u=http...sue=267&page=6&type=1&grqid=VbDqgFEZ&hl=en-IN
Also please check out the video :
This was for ZUK1. But it should also work with P2. You just need to find the Raw stock firmware image.
The stock Firmware is also available here:
https://mega.nz/#!3hhhhRYC!bDbs1VGHA7s0n-uH-B30fVDsulFRVw-ZbYTvheS9m8I
Click to expand...
Click to collapse
There is no adb & fastboot to try these above step, bro... ? only red light while charging..
I guess you need to wait till firehose for P2a2 is leaked. I am also having same issue as you. Just waiting.
Or else you can try custom solutions like infinity box. will cost you money
Sangeeth Mk said:
My Device Details :
Device : Lenovo P2a2
Bootloader : Unlocked
OS: Stock Android N 7.0
Recovery : TWRP
After Erasing modemst1 , modemst2 while flashing ROM, my device Baseband has been lost.. to recover baseband i have tried to flash everything in stock ROM files.. after flashing everything, my device is dead now (Hard Brick) there is no Recovery, no fastboot, only indicating RED LED while charging, is there any tool or any idea to recover my device? i have attached an log file to this thread & while connecting to pc there is a driver is installing ( Qualcomm HS-USB QDLoader 9008 ) . . it's screen shot also attached.
Click to expand...
Click to collapse
Yes exactly same happen to me unable to access recovery and fastboot, but you can restore your phone as long as in state Qualcomm HS-USB QLoader 9008, not by qfil or miflash tool it will make even worse if you flash by another firmware, but only by original p2 firmaware, your phone cannot boot because bootloader file corrupt
hendibudi said:
Yes exactly same happen to me unable to access recovery and fastboot, but you can restore your phone as long as in state Qualcomm HS-USB QLoader 9008, not by qfil or miflash tool it will make even worse if you flash by another firmware, but only by original p2 firmaware, your phone cannot boot because bootloader file corrupt
Click to expand...
Click to collapse
Without fastboot mode I don't think he can flash the firmware/bootloader.
abhayruparel said:
Without fastboot mode I don't think he can flash the firmware/bootloader.
Click to expand...
Click to collapse
Hacker from poland cant restore his p2 from hardbrick, while he can't access to fastboot and recovery, i can restore also after 3 months my phone got hardbrick
hendibudi said:
Hacker from poland cant restore his p2 from hardbrick, while he can't access to fastboot and recovery, i can restore also after 3 months my phone got hardbrick
Click to expand...
Click to collapse
I'm aksing how did you restore.
abhayruparel said:
I'm aksing how did you restore.
Click to expand...
Click to collapse
your phone should in state Qualcomm HS-USB QLoader 9008
hendibudi said:
your phone should in state Qualcomm HS-USB QLoader 9008
Click to expand...
Click to collapse
What after that?
Hi guys,
for the last months I was using LineageOs, but since they dropped development for our device I wanted to get rid of it.
I tried to get AOSP running but failed. Next I flashed a stock kdz file in Download Mode using LGUP and it worked,
I was back to stock. I tried to install AOSP through TWRP but failed again and eventually ended up doing a hard reset.
This temporarily bricked the device because now the stock android booted and Android Device Protection (FRP) was
active and didn't let me log in. Desperate to find a solution I flashed random kdz/tot files for the device that I found on
the Internet until one finally worked (LGH815 EU Nougat 7.0 BySezerSimsek), the FRP thing was gone. Then I tried to at
least get back to stock again, but when I tried to flash the stock kdz file LGUP aborts at 25% with Error Code 0x2000.
Every time I start the phone now, it goes directly in this firmware update/download mode.
The device shows up as "LGE AndroidNet USB Serial Port" In Windows Device Manager
In Download mode it says "633A B92 Official" on the display
I already tried:
Different dll files for LGUP
Using LG Flash Tool 2014 instead
Putting dump file on SD card
Should I put it in 9008 mode and work with QFIL or what am I supposed to do now?
Thank you.
I'm still able to get into fastboot mode btw. But I'm going to wait for replies here
before I make things worse. If that's even possible at this point. :silly:
h4yabu5a said:
I'm still able to get into fastboot mode btw. But I'm going to wait for replies here
before I make things worse. If that's even possible at this point. :silly:
Click to expand...
Click to collapse
:highfive:<-
jason_l367 said:
:highfive:<-
Click to expand...
Click to collapse
My phone is alive again, thanks Jason:laugh:
Just a short recap what I've done now in case it helps someone with the same problem, the full instructions
are in Jasons link.
I used the KDZ and TOT Extractor to extract the LGUP8994.dll file out of a stock Marshmallow v20p KDZ.
I renamed the dll to LGUP_8994.dll and moved it to C:\..\LG Electronics\LGUP\model\8994, overriding the
existing file. Now LGUP was able to flash the v20p KDZ without the 0x2000 Error.
Hello everyone.
my Lenovo TAB3 Plus (tb3-x70f with an mt8161 chip) is bricked an i need some help.
I think i bricked it when i flashed the boot and recovery partitions via fastboot using the wrong images.
To resore it i tried using the sp flash tools and a firmware i found on the internet.
Sadly the flashing process failed with an error from the sp flash tools:
BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)
The chioce of firmwares for the tablet is limited and i thought maybe i got the wrong ones.
So i decided to create my own backup from a new, still operating TAB3 Plus.
There for i followed a tutorial on forum.hovatek.com/thread-21970
But this didnt work neither. Sp flash tool failed with BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032).
I installed like every Mediatek driver i could find, tried different usb-ports (some usb3 and some usb2) and cables, operating systems (Windows 10, 7 and ubuntu) and versions of the sp flash tools. Nothing helped.
I got several questions:
What is the DRAM?
Why is the sp flash tool not able to enable it?
Was anyone able to use the sp flash tool with an mt8161?
What might i have done wrong?
Are there other tools i should try?
Thank you all for your comments in advance!
Mo
Hi,
Anyone have working scatter for Lenovo TB3-X70L ZA0Y? I downloaded image "Lenovo Tab3 A10 Business LTE-TB3-X70L_S000020_170209_ROW" which theoretically should work, but when im trying do use image im getting: "CHIP TYPE NOT match!! target efuse value: 0x82010000"
Tablet is soft bricked. It is not charging, so i even cannot enter fastboot (so it must be via scatter file)
Please help
Daveron81 said:
Hi,
Anyone have working scatter for Lenovo TB3-X70L ZA0Y? I downloaded image "Lenovo Tab3 A10 Business LTE-TB3-X70L_S000020_170209_ROW" which theoretically should work, but when im trying do use image im getting: "CHIP TYPE NOT match!! target efuse value: 0x82010000"
Tablet is soft bricked. It is not charging, so i even cannot enter fastboot (so it must be via scatter file)
Please help
Click to expand...
Click to collapse
make sure you know your chipset because there exist 2 different firmwares for lenovo tab 3 x70l MediaTek MT8735 MediaTek MT8161 make sure the firmware you use matches your cpu
I'm stuck on 'Wiping, please wait' on a OnePlus Nord N100 Model BE2013
* Phone will not boot into recovery, goes straight to 'Wiping, please wait'
* Both partitions are toast
* Best TWRP I could find was 'recovery-3.7.0-11-08012023.img' but it started having problems mounting, might not be decrypting properly. (I was getting out-of-space errors. TWRP wasn't able to mount partitions to fix the errors.)
* TWRP's ADB and Fastboot, and prompt doesn't seem to decrypt phone's partitions properly. Keep getting write permission / out-of-space errors when trying to debug, re-flash ROMs.
* All I have left is the phone's native Fastboot.
What would you do to recover?
How can i wipe / repartition the storage so TWRP can mount it?
Flash all partitions manually (or use a script like me). Or MSM tool in EDL mode.
thomaskmaagaard said:
Flash all partitions manually (or use a script like me). Or MSM tool in EDL mode.
Click to expand...
Click to collapse
Thanks for the advice.. I used MSM in EDL today and all is good again.
tonydiepyyz said:
Thanks for the advice.. I used MSM in EDL today and all is good again.
Click to expand...
Click to collapse
Would you please share tool and firmware ? I have a similar problem
wlb01 said:
Would you please share tool and firmware ? I have a similar problem
Click to expand...
Click to collapse
Download MSM Download Tool: Unbrick any OnePlus Device [Video]
From this guide, you could download the MSM Download Tool for every OnePlus device and then use it to unbrick your OnePlus device.
www.droidwin.com