Develop Bugs

Unbrick help / Need bin. files

Hy nexus friends,
I need help from someone with a 791F 32GB. I dont know if a 790 or a 16gb version is identical.
It would be great if someone with a rooted device can make a backup for me of the bootloader bin files.
aboot, sbl1, rpm, tz, sdi, sbl1b, tzb, rpmb, abootb, misc, laf, persist.
I flashed the hammerhead bootloader and stuck at 9008 mode.
It will be ver great if someone could help me.
Some partition apps could make a backup or with the dd command.
If i fet a solution, i would post it here. At the moment i had the device and the tools that i flashed for test a nexus 5 sbl. So write is possible.
Thanks for help guys

Where can I see if my phone is 791F?

i have the US Nexus 5X 32GB. Tell me what to do and I'll get you what you need.

tacofromhell said:
Where can I see if my phone is 791F?
Click to expand...
Click to collapse
Model number on the phone box and I believe in the bootloader screen: turn off phone then hold volume down and power.
Sent from my Nexus 5X using Tapatalk

SlimSnoopOS said:
Model number on the phone box and I believe in the bootloader screen: turn off phone then hold volume down and power.
Sent from my Nexus 5X using Tapatalk
Click to expand...
Click to collapse
Ok. Just rebooted into bootloader and under "Variant" it says LGH791 but no F, sorry

Thx for your help.
You can backup the partitions with some partition backup apps or with dd.
If you look with a file explorer in /dev/block/platform/soc.0/f9824900.sdhci/by-name/XXXXX , XXXX there are the partiton names.
If you want to copy with adb, make adb shell, su, and then:
dd if= /dev/block/platform/soc.0/f9824900.sdhci/by-name/cmnlib of=sdcard/cmnlib.img
Around 36 partitons are in the MM build. System, cache, userdata are not needed..

konsolen said:
Thx for your help.
You can backup the partitions with some partition backup apps or with dd.
If you look with a file explorer in /dev/block/platform/soc.0/f9824900.sdhci/by-name/XXXXX , XXXX there are the partiton names.
If you want to copy with adb, make adb shell, su, and then:
dd if= /dev/block/platform/soc.0/f9824900.sdhci/by-name/cmnlib of=sdcard/cmnlib.img
Around 36 partitons are in the MM build. System, cache, userdata are not needed..
Click to expand...
Click to collapse
Have you found a solution to get booting again? Been searching and tried multiple methods to repair my boot image on the H791 I own.
I have worked with another XDAer who extracted and now have the bootimage files from several stock H791 files available. They include the GPT from the stock image MDA89E and the boot image files from bootloader-bullhead-bhz10i.img bootloader-bullhead-bhz10k.img and bootloader-bullhead-bhz10m.img. Let me know if you still need these. I see 11 files in the boot image. During some testing I flashed over the sbl1 on my device and lost the ability do anything but go into QUSB DL mode 9008 as well.
As I am writing this I am now wondering if there is a separate set of SBL etc. files for the International variant? We may need to extract from the 791 tot file available the needed files if we do not have another method of obtaining them. Let me know if you have found a workable way to flash the needed boot images in place. Thanks.

nate0 said:
Have you found a solution to get booting again? Been searching and tried multiple methods to repair my boot image on the H791 I own.
I have worked with another XDAer who extracted and now have the bootimage files from several stock H791 files available. They include the GPT from the stock image MDA89E and the boot image files from bootloader-bullhead-bhz10i.img bootloader-bullhead-bhz10k.img and bootloader-bullhead-bhz10m.img. Let me know if you still need these. I see 11 files in the boot image. During some testing I flashed over the sbl1 on my device and lost the ability do anything but go into QUSB DL mode 9008 as well.
As I am writing this I am now wondering if there is a separate set of SBL etc. files for the International variant? We may need to extract from the 791 tot file available the needed files if we do not have another method of obtaining them. Let me know if you have found a workable way to flash the needed boot images in place. Thanks.
Click to expand...
Click to collapse
I'm on the same boat , hope you have something to boot it up
It's been more than 3 weeks, my 5X just brick itself . And LG doesn't support 5X in my country . I'm very very hoping you will find solution.

Apayah said:
I'm on the same boat , hope you have something to boot it up
It's been more than 3 weeks, my 5X just brick itself . And LG doesn't support 5X in my country . I'm very very hoping you will find solution.
Click to expand...
Click to collapse
I think the only way from my perspective so far is to manually flash the needed QComm/boot image/boot loader files with something that can interface with the phone. I am pretty sure I know a method to manually do this but need the flash programmer that works with this device to accomplish. Or if there is a way to add MSM8992 support to the BoardDiag tool, that would work...I have not given up, just have not had a whole lot of time to work on this the past 2 days.

nate0 said:
I think the only way from my perspective so far is to manually flash the needed QComm/boot image/boot loader files with something that can interface with the phone. I am pretty sure I know a method to manually do this but need the flash programmer that works with this device to accomplish. Or if there is a way to add MSM8992 support to the BoardDiag tool, that would work...I have not given up, just have not had a whole lot of time to work on this the past 2 days.
Click to expand...
Click to collapse
I see boardiag for n5 , please don't give up ?.
And i see blank flash file for N6

Try to connect the usb cable with the pressed vol up button. Normaly the lg download screen should pop up.
Its possible then to flash a tot file with the lg up tool.
But i found only one tot file around the i net.
It will be flashed but hang in the bootscreen.
A org. tot or kdz file were great or a solution to create such a file.

konsolen said:
Try to connect the usb cable with the pressed vol up button. Normaly the lg download screen should pop up.
Its possible then to flash a tot file with the lg up tool.
But i found only one tot file around the i net.
It will be flashed but hang in the bootscreen.
A org. tot or kdz file were great or a solution to create such a file.
Click to expand...
Click to collapse
I can go to download mode but it can't hang , the screen turns to black Immediately. I'm just waiting for another way .

Apayah said:
I can go to download mode but it can't hang , the screen turns to black Immediately. I'm just waiting for another way .
Click to expand...
Click to collapse
Yes. The FW download screen is not an option here. Seems those of us currently needing a solution or method is do to the phone being in QC emergency mode only. I can see my phone in device manager only as with the QC HUSB 9008 drivers.

nate0 said:
Yes. The FW download screen is not an option here. Seems those of us currently needing a solution or method is do to the phone being in QC emergency mode only. I can see my phone in device manager only as with the QC HUSB 9008 drivers.
Click to expand...
Click to collapse
Yes it same , i got that to.
So what is blank flash? on N6 thread .

链接：https://pan.baidu.com/s/1TmQ9jmdAym2NYt_YGyt2Cg 引脚：g5cg

About using flash tool in my sony xperia m dual c2005

I have some doubts about the using of flash tool.
1. Is it necessary to unlock the boatloader before flashing my phone?
2. Is it necessary to tick the usb debugging before using flash tool?
3. When i use flash tool, after some time it shows failed in my xperia m dual c2005. I am curious to know the reason behind it..
Any body please help me to clear my doubts....

N RAM said:
I have some doubts about the using of flash tool.
1. Is it necessary to unlock the boatloader before flashing my phone?
2. Is it necessary to tick the usb debugging before using flash tool?
3. When i use flash tool, after some time it shows failed in my xperia m dual c2005. I am curious to know the reason behind it..
Any body please help me to clear my doubts....
Click to expand...
Click to collapse
Yes the bootloader obviously should be unlocked before you do the flashing stuff!Flashtool works for me and the state of usb debugging never affected its functionality ! Make sure you have all the drivers properly installed!

ojas12345 said:
Yes the bootloader obviously should be unlocked before you do the flashing stuff!Flashtool works for me and the state of usb debugging never affected its functionality ! Make sure you have all the drivers properly installed!
Click to expand...
Click to collapse
Thanks bro..:good:
Dude one more simple doubt. Is it possible for you to tell me how to install the drivers in my win 7?
Now I am facing another problem. I just tried to restore my xperia m dual c2005. But it didn't go well. I saw my xperia waves got stucked. So i just removed my battery an replaced it. When I switched on my phone it only shows SONY logo. I tried to repair my software by using PCC and Xperia Companion. It shows error messages. Then i showed it to a mobile service agent in a local mobile shop. He told me that m dual c2005 model had a sony only memory. So they cannot do it because the memory can't be re-writeted in this model. Is that true? Or is there any other better option to resolve my phone's issue?
Please help me bro....:crying:

N RAM said:
Thanks bro..:good:
Dude one more simple doubt. Is it possible for you to tell me how to install the drivers in my win 7?
Now I am facing another problem. I just tried to restore my xperia m dual c2005. But it didn't go well. I saw my xperia waves got stucked. So i just removed my battery an replaced it. When I switched on my phone it only shows SONY logo. I tried to repair my software by using PCC and Xperia Companion. It shows error messages. Then i showed it to a mobile service agent in a local mobile shop. He told me that m dual c2005 model had a sony only memory. So they cannot do it because the memory can't be re-writeted in this model. Is that true? Or is there any other better option to resolve my phone's issue?
Please help me bro....:crying:
Click to expand...
Click to collapse
To Install the drivers
I think you might be able to solve this problem! The problem is with your partitions.So follow:
first of all install fastboot and adb drivers from: http://forum.xda-developers.com/showthread.php?p=48915118
go to device manager and verify that and android device interface or something like that appears.
If it doesnt then s1 boot device will appear as unknown device , right click on that and update device driver and then select the option let me pick from drivers on my computer .
After that select android device then dont select anything , itll get autoselected and click next!
now your device should appear in device manager!
To restore the system completely
Install a recovery for the device by the following procedure :
first download twrp from https://twrp.me/devices/sonyxperiam.html, rename it to recovery.img
go to cmd with admin rights in the folder in which recovery is put
(flash the recovery in boot sector)
type :
fastboot flash boot recovery.img
now boot the phone up the recovery should automatically open up, it may get stuck for some time but only once it will so be patient,;
go to wipe, then advanced wipe! select every option and micro sd,internal storage and usb-otg are optional
then swipe to wipe , it will show that it failed but dont worry some partitions are of sort that they show error now after this the problem should be resolved , after this flash a rom of your choice or restore a dual stock firmware backup (note: you cannot restore backups which were made from cwm , for that flash philz or cwm recovery)
Please report and hit thanks if i helped you!

ojas12345 said:
To Install the drivers
I think you might be able to solve this problem! The problem is with your partitions.So follow:
first of all install fastboot and adb drivers from: http://forum.xda-developers.com/showthread.php?p=48915118
go to device manager and verify that and android device interface or something like that appears.
If it doesnt then s1 boot device will appear as unknown device , right click on that and update device driver and then select the option let me pick from drivers on my computer .
After that select android device then dont select anything , itll get autoselected and click next!
now your device should appear in device manager!
To restore the system completely
Install a recovery for the device by the following procedure :
first download twrp from https://twrp.me/devices/sonyxperiam.html, rename it to recovery.img
go to cmd with admin rights in the folder in which recovery is put
(flash the recovery in boot sector)
type :
fastboot flash boot recovery.img
now boot the phone up the recovery should automatically open up, it may get stuck for some time but only once it will so be patient,;
go to wipe, then advanced wipe! select every option and micro sd,internal storage and usb-otg are optional
then swipe to wipe , it will show that it failed but dont worry some partitions are of sort that they show error now after this the problem should be resolved , after this flash a rom of your choice or restore a dual stock firmware backup (note: you cannot restore backups which were made from cwm , for that flash philz or cwm recovery)
Please report and hit thanks if i helped you!
Click to expand...
Click to collapse
Thanks dude... Are you sure about this idea?
My phone is not an Indian phone. It is from Dubai. Will this country change damage my phone's main board when I boot it?
And some more doubts are remaining... May I please clear it with you....
Which will be the best flashtool?
Emma tool provided by Sony or flashtool-0.9.18.1 or flashtool-0.9.21.0
When do I need to connect my handset to the computer? Is it before when I go to cmd to type fastboot flash boot recovery.img ?
Whether I need to install flash tool before installing device drivers?
Please help me to clear all my doubts....

N RAM said:
Thanks bro..:good:
Dude one more simple doubt. Is it possible for you to tell me how to install the drivers in my win 7?
Now I am facing another problem. I just tried to restore my xperia m dual c2005. But it didn't go well. I saw my xperia waves got stucked. So i just removed my battery an replaced it. When I switched on my phone it only shows SONY logo. I tried to repair my software by using PCC and Xperia Companion. It shows error messages. Then i showed it to a mobile service agent in a local mobile shop. He told me that m dual c2005 model had a sony only memory. So they cannot do it because the memory can't be re-writeted in this model. Is that true? Or is there any other better option to resolve my phone's issue?
Please help me bro....:crying:
Click to expand...
Click to collapse
N RAM said:
Thanks dude... Are you sure about this idea?
My phone is not an Indian phone. It is from Dubai. Will this country change damage my phone's main board when I boot it?
And some more doubts are remaining... May I please clear it with you....
Which will be the best flashtool?
Emma tool provided by Sony or flashtool-0.9.18.1 or flashtool-0.9.21.0
When do I need to connect my handset to the computer? Is it before when I go to cmd to type fastboot flash boot recovery.img ?
Whether I need to install flash tool before installing device drivers?
Please help me to clear all my doubts....
Click to expand...
Click to collapse
The country doesnt matter you may flash any country's generic rom,mine was indian but I flashed brazillian..
And about the flashtool I dont think emma is good , i prefer flashtool any version...if you find the latest not working then you may try the second latest but 99% it does work good..
Most important : You need to connect your device in fastboot before installing drivers and flash the boot partition by those command so go here on how to boot in fastboot mode http://www.theandroidsoul.com/boot-sony-xperia-m-fastboot-mode-51835/
try and report ...
All the best:good:

ojas12345 said:
The country doesnt matter you may flash any country's generic rom,mine was indian but I flashed brazillian..
And about the flashtool I dont think emma is good , i prefer flashtool any version...if you find the latest not working then you may try the second latest but 99% it does work good..
try and report ...
All the best:good:
Click to expand...
Click to collapse
You are really awesome!!
For this do I need to unlock the bootloader?
Yeah. I will report about our experiment after trying it...:good:
Is it possible for me to relock bootloader? If yes, please explain me about that method...

N RAM said:
You are really awesome!!
For this do I need to unlock the bootloader?
Yeah. I will report about our experiment after trying it...:good:
Is it possible for me to relock bootloader? If yes, please explain me about that method...
Click to expand...
Click to collapse
yes you will have to unlock bootloader and for that too i suggest you use flashtool because it does the work in seconds,!
and for relocking i dont there's any method to relock bootloader , u dont need to do that after all!
It enables you to flash modes and other cool stuff! even if you dont wanna do that then dont touch it !flash a cyanogenmod recovery,which is quite basic and wont modify anything that may harm your phone...
All the best

What will be the difference between the firmwares C2005_15.5.A.1.5_CE.ftf and C2005_15.5.A.1.5_DE.rar?
Which will be the best for me to download?

ojas12345 said:
To Install the drivers
I think you might be able to solve this problem! The problem is with your partitions.So follow:
first of all install fastboot and adb drivers from: http://forum.xda-developers.com/showthread.php?p=48915118
go to device manager and verify that and android device interface or something like that appears.
If it doesnt then s1 boot device will appear as unknown device , right click on that and update device driver and then select the option let me pick from drivers on my computer .
After that select android device then dont select anything , itll get autoselected and click next!
now your device should appear in device manager!
To restore the system completely
Install a recovery for the device by the following procedure :
first download twrp from https://twrp.me/devices/sonyxperiam.html, rename it to recovery.img
go to cmd with admin rights in the folder in which recovery is put
(flash the recovery in boot sector)
type :
fastboot flash boot recovery.img
now boot the phone up the recovery should automatically open up, it may get stuck for some time but only once it will so be patient,;
go to wipe, then advanced wipe! select every option and micro sd,internal storage and usb-otg are optional
then swipe to wipe , it will show that it failed but dont worry some partitions are of sort that they show error now after this the problem should be resolved , after this flash a rom of your choice or restore a dual stock firmware backup (note: you cannot restore backups which were made from cwm , for that flash philz or cwm recovery)
Please report and hit thanks if i helped you!
Click to expand...
Click to collapse
Which is the best site for downloading latest firmware?

N RAM said:
Which is the best site for downloading latest firmware?
Click to expand...
Click to collapse
intead of flashing firmware ,it is better to flash a backup because , no chances of error
download the backup for your device from here and restore it via cwm based recovery like philz or cwm itselg
http://forum.xda-developers.com/showthread.php?t=2703161

ojas12345 said:
yes you will have to unlock bootloader and for that too i suggest you use flashtool because it does the work in seconds,!
and for relocking i dont there's any method to relock bootloader , u dont need to do that after all!
It enables you to flash modes and other cool stuff! even if you dont wanna do that then dont touch it !flash a cyanogenmod recovery,which is quite basic and wont modify anything that may harm your phone...
All the best
Click to expand...
Click to collapse
I tried to flash my xperia m dual c2005. Its only showing like the picture for long time.
what will be this? please reply me fast...

N RAM said:
I tried to flash my xperia m dual c2005. Its only showing like the picture for long time.
what will be this? please reply me fast...
Click to expand...
Click to collapse
wait for some time i think it'll take time to do that or else flash a backup after flashing a cwm based recovery!

ojas12345 said:
wait for some time i think it'll take time to do that or else flash a backup after flashing a cwm based recovery!
Click to expand...
Click to collapse
what is the meaning of that red writings?

N RAM said:
what is the meaning of that red writings?
Click to expand...
Click to collapse
I never faced that kind of a thing , make sure that you are flashing the right file!
You have unlocked your bootloader?
Again I say better flash a recovery then a backup ,its much easier.

ojas12345 said:
I never faced that kind of a thing , make sure that you are flashing the right file!
You have unlocked your bootloader?
Again I say better flash a recovery then a backup ,its much easier.
Click to expand...
Click to collapse
My phone is only showing SONY logo. So is it possible for this recovery? If yes, please tell me the correct tutorial for that and if possible any video tutorial so that i can understand it correctly...

not working
ojas12345 said:
To Install the drivers
I think you might be able to solve this problem! The problem is with your partitions.So follow:
first of all install fastboot and adb drivers from: http://forum.xda-developers.com/showthread.php?p=48915118
go to device manager and verify that and android device interface or something like that appears.
If it doesnt then s1 boot device will appear as unknown device , right click on that and update device driver and then select the option let me pick from drivers on my computer .
After that select android device then dont select anything , itll get autoselected and click next!
now your device should appear in device manager!
To restore the system completely
Install a recovery for the device by the following procedure :
first download twrp from https://twrp.me/devices/sonyxperiam.html, rename it to recovery.img
go to cmd with admin rights in the folder in which recovery is put
(flash the recovery in boot sector)
type :
fastboot flash boot recovery.img
now boot the phone up the recovery should automatically open up, it may get stuck for some time but only once it will so be patient,;
go to wipe, then advanced wipe! select every option and micro sd,internal storage and usb-otg are optional
then swipe to wipe , it will show that it failed but dont worry some partitions are of sort that they show error now after this the problem should be resolved , after this flash a rom of your choice or restore a dual stock firmware backup (note: you cannot restore backups which were made from cwm , for that flash philz or cwm recovery)
Please report and hit thanks if i helped you!
Click to expand...
Click to collapse
i am getting this error :
C:\Fastboot\android-sdk-windows\tools>fastboot flash boot recovery.img
sending 'boot' (11208 KB)...
FAILED (status read failed (Too many links))
finished. total time: -0.000s

Need help with qfil. Urgent!! Please help

HI,
so my device is stuck in recovery boot so even when i install a ROM it keeps going to recovery again. i was suggested to use QFIL. so i did followed all the instrcutions downloaded all necessary files and port 9008 is also showing up. the problem is when i press download i get the same error. ive tried restarting the program computer and even got test mode on.
Process Index:0
Programmer Path:C:\Users\Family\Desktop\zuk\prog_emmc_firehose_8996_ddr.elf
Image Search Path:C:\Users\Family\Desktop\zuk
Please select the XML file
Start Download
Program Path:C:\Users\Family\Desktop\zuk\prog_emmc_firehose_8996_ddr.elf
COM Port number:9
Sahara Connecting ...
Sahara Version:0
Start Sending Programmer
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
at QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
at QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail
Finish Download
PLEASE SOMEONE HELP ME THIS IS MY ONLY PHONE AND I JUST GOT IT A MONTH AGO

Please someone help
Please can someone help me im dying here

cosmicaero said:
Please can someone help me im dying here
Click to expand...
Click to collapse
Some guys had this error because the drivers wasnt installed properly. Try to install the drivers again.
Also, have you unlocked the bootloader? Try that also. That can also fix the issue.

Gerriitw said:
Some guys had this error because the drivers wasnt installed properly. Try to install the drivers again.
Also, have you unlocked the bootloader? Try that also. That can also fix the issue.
Click to expand...
Click to collapse
I've installed the ZUK_UsbDriver_1.0.5 drivers onto my PC. my bootloader was already unlocked. I rooted my phone and installed TWRP and a custom ROM. I went to factory reset my phone and now i only have the TWRP recovery left. When i go to install the new ROM zip from TWRP it installs without any errors but when it goes to boot the system it booting into TWRP.

cosmicaero said:
I've installed the ZUK_UsbDriver_1.0.5 drivers onto my PC. my bootloader was already unlocked. I rooted my phone and installed TWRP and a custom ROM. I went to factory reset my phone and now i only have the TWRP recovery left. When i go to install the new ROM zip from TWRP it installs without any errors but when it goes to boot the system it booting into TWRP.
Click to expand...
Click to collapse
Have you mount everything in the recovery? Check if everything is checked in the mount setting in twrp

Gerriitw said:
Have you mount everything in the recovery? Check if everything is checked in the mount setting in twrp
Click to expand...
Click to collapse
Can you please tell me how to do that please?

cosmicaero said:
Can you please tell me how to do that please?
Click to expand...
Click to collapse
Look at the screenies i made for you ^^

Gerriitw said:
Look at the screenies i made for you ^^
Click to expand...
Click to collapse
thank you after i've clicked them should i try to install the ROM?

cosmicaero said:
thank you after i've clicked them should i try to install the ROM?
Click to expand...
Click to collapse
If the rom is properly installed, just try to reboot agian.

Gerriitw said:
If the rom is properly installed, just try to reboot agian.
Click to expand...
Click to collapse
when i click on them and tick them and reboot the system then i reboot to system it goes back to TWRP. i look on mount again and the ones that i checked became unchecked with only 'Data' and 'Cache' the only ones stayed checked

cosmicaero said:
when i click on them and tick them and reboot the system then i reboot to system it goes back to TWRP. i look on mount again and the ones that i checked became unchecked with only 'Data' and 'Cache' the only ones stayed checked
Click to expand...
Click to collapse
Try read mount system partition only

Gerriitw said:
Try read mount system partition only
Click to expand...
Click to collapse
no that didnt work but it stays ticked

Solve Sahara Fail QFIL
cosmicaero said:
HI,
so my device is stuck in recovery boot so even when i install a ROM it keeps going to recovery again. i was suggested to use QFIL. so i did followed all the instrcutions downloaded all necessary files and port 9008 is also showing up. the problem is when i press download i get the same error. ive tried restarting the program computer and even got test mode on.
Process Index:0
Programmer Path:C:\Users\Family\Desktop\zuk\prog_emmc_firehose_8996_ddr.elf
Image Search Path:C:\Users\Family\Desktop\zuk
Please select the XML file
Start Download
Program Path:C:\Users\Family\Desktop\zuk\prog_emmc_firehose_8996_ddr.elf
COM Port number:9
Sahara Connecting ...
Sahara Version:0
Start Sending Programmer
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
at QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
at QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail
Finish Download
PLEASE SOMEONE HELP ME THIS IS MY ONLY PHONE AND I JUST GOT IT A MONTH AGO
Click to expand...
Click to collapse
Here are a few checks that you should do to get rid of problem:
1. check for z2 plus drivers
2. check for qualcomm diag drivers
3. place the firmware folder so that path is short ('C:/firm')
4. Restart system
4. launch qfil, select relevant files as mentioned in tutorial, get into qualcomm port mode (either through shut down phone+vol up key OR adb reboot edl). As soon as you see port in qfil hit download.

cosmicaero said:
I've installed the ZUK_UsbDriver_1.0.5 drivers onto my PC. my bootloader was already unlocked. I rooted my phone and installed TWRP and a custom ROM. I went to factory reset my phone and now i only have the TWRP recovery left. When i go to install the new ROM zip from TWRP it installs without any errors but when it goes to boot the system it booting into TWRP.
Click to expand...
Click to collapse
My phone also got stuck in a TWRP bootloop and I solved it with this solution:
Go to TWRP recovery terminal commands, and enter the following:
dd if=/dev/zero of=/dev/block/platform/soc/7464900.sdhci/by-name/misc

Thread close or however you close the thread. Thanks for the results a whole month after

Thank You !!
veethree said:
My phone also got stuck in a TWRP bootloop and I solved it with this solution:
Go to TWRP recovery terminal commands, and enter the following:
dd if=/dev/zero of=/dev/block/platform/soc/7464900.sdhci/by-name/misc
Click to expand...
Click to collapse
thank you,it worked !
i was so panicked this happend and nothing worked and my phone device is like 2 days old lol

noobaj said:
thank you,it worked !
i was so panicked this happend and nothing worked and my phone device is like 2 days old lol
Click to expand...
Click to collapse
Great thanks Bro . you saved my day...

veethree said:
My phone also got stuck in a TWRP bootloop and I solved it with this solution:
Go to TWRP recovery terminal commands, and enter the following:
dd if=/dev/zero of=/dev/block/platform/soc/7464900.sdhci/by-name/misc
Click to expand...
Click to collapse
You saved my day brother..
I was at it for 6 7 hours straight until i found this thread.
Thank you.

cosmicaero said:
Can you please tell me how to do that please?
Click to expand...
Click to collapse
I just flashed ROM, clicked reboot,,then reboot bootloader...then clicked start or even started factory mode. Boots right up
---------- Post added at 02:25 AM ---------- Previous post was at 01:56 AM ----------
snehgada said:
You saved my day brother..
I was at it for 6 7 hours straight until i found this thread.
Thank you.
Click to expand...
Click to collapse
Is this all in one line?

I tried to unlock bootloader and install custom rom but the when I tried to install pixel rom in twrp mode it shows errors many time so I disconnected cable and after that I tried to connect with cable it doesn't connect do I locked the bootloader through adb fastboot loader and now my phone is not turning off or on only screen show zuk and powerd by Android.
Pls help me what to do now.

[Updated][How To] Backup Stock Rom Moto E(4) All Variants

About :​Backup your Moto E4's Official Stock ROM in scatter format.​
Requirement :​- A Moto E(4)
- USB Cable
- MT65xx USB VCOM DRIVERS http://www.devfiles.co/download/0InO9P5m/MT65xx_USB_VCOM_DRIVERS.zip
- MotorolaDeviceManager_2.5.4 Driver Software https://androidfilehost.com/?fid=24269982087012538
- Miracle Tool v2.27a + Loader.exe https://forum.hovatek.com/thread-15700.html​
Installing MT65xx USB VCOM Driver :​- Right click on the InstallDriver.exe
- Run as administrator
- On driver signature warning click OK
- Driver software installed Now​
Installing Device Driver :​- Install MotorolaDeviceManager 2.5.4 Driver Software​
Miracle Tool Forum :​- Download Mircale Tool + Loader
Thread Link : https://forum.hovatek.com/thread-13347.html​
Switch Off Device :​- Switch off your Moto E4
- Remove its battery​
Miracle Tool Stock Firmware Backup Procedure and Device Manager Hook :​- Unpack miracle 2.27A (dsmedia24)
- Run Miracle_Loader_2.27A.exe
- If Start button Faded & Non-working
- Close Miracle tool first
- Change your PC Date to 1 July 2016
- Now Again ! Run Miracle_Loader_2.27A.exe
- Within MTK Tab < Select Read
- Boot Selection Boot Select: 8TH Boot
- Tick/Check save as scatter file
- Leave Miracle Tool in This State
- Open Device Manager within control panel
- Resize the Device Manager Window
- Adjust both Miracle Tool and Device Manager window side by side
- Insert USB Cable at one end of the device
- Now insert another end of USB Cable in Desktop/Laptop USB Port
- As soon as you insert the USB Cable in USB Port ! Hit volume up button simultaneously
- Look at the Device Manager Window under COM & LPT
- You will see MTK USB PORT
- When COM & LPT option gone in Device Manager Window
- Suddenly Hit Start Button in Miracle Tool.
(If successfully done ! You will see charging LED but not charging at all)
- Now in miracle tool select all the files except CACHE & USERDATA
- Click on OK Button
- Select Path
- Do not interfere until backup job finish
- Done​
Guide For MOTO E(4) All Variants​Credits :​@havotek​

This even works on the Snapdragon E4's?

mendelgordon said:
This even works on the Snapdragon E4's?
Click to expand...
Click to collapse
you should give a try first.

kartik verma said:
you should give a try first.
Click to expand...
Click to collapse
I can't try anything since my original e4 had ghost touch issues, so I haven't unlocked the bootloader on my new one because I want to keep the warranty

mendelgordon said:
I can't try anything since my original e4 had ghost touch issues, so I haven't unlocked the bootloader on my new one because I want to keep the warranty
Click to expand...
Click to collapse
taking firmware backup doesn't void your device warranty. instead this process doesn't require rooting or unlocked bootloader :fingers-crossed:

isn't it possible to do a spflashtool readback if we have a scatter file ...
---------- Post added at 05:36 PM ---------- Previous post was at 05:27 PM ----------
My device ( woods)(E4) isn't using this chipset ? shouldn't we try to edit a scatter file from the correct chipset and pulling the block map from adb ?
I want to get a valid scatter to do a readback of an unpatched boot image and stock rom using spflashtools and then patching boot with magisk .
Then we could flash back to stock etc etc ...can any of you who rooted woods use terminal or adb and pull the correct mount points so we can create a scatter for the 2GB/16GB woods variant .

KevMetal said:
isn't it possible to do a spflashtool readback if we have a scatter file ...
---------- Post added at 05:36 PM ---------- Previous post was at 05:27 PM ----------
My device ( woods)(E4) isn't using this chipset ? shouldn't we try to edit a scatter file from the correct chipset and pulling the block map from adb ?
I want to get a valid scatter to do a readback of an unpatched boot image and stock rom using spflashtools and then patching boot with magisk .
Then we could flash back to stock etc etc ...can any of you who rooted woods use terminal or adb and pull the correct mount points so we can create a scatter for the 2GB/16GB woods variant .
Click to expand...
Click to collapse
@KevMetal
you can do this by following the main post
it's a miracle dump so obviously you can't make it spflash tool flashable. but our device have newer mtk chipset MT6737M and miracle tool isn't capable of flashing factory images to newer chipset you need a dongle to complete the flashing process. if we make this process more simple than you need to follow these simple steps.
dump firmware with miracle tool. its in .bin format change the extention to .img and this firmware is ready for flashing with fastboot tool.
do not flash these files in fastboot mode *pgpt.img* and "preloader.img*
if you still want to flash pgpt.img the correct way of flashing this file is "fastboot flash partition pgpt.img"

I am unable to backup using this guide as miracle tool fails to detect my phone. I followed the guide thoroughly but the tool shows "Waiting for USB Port..." two times and then "none usbport, maybe driver not installed". My phone shows white LED when I connect it as per instructions in OP.

gururoop said:
I am unable to backup using this guide as miracle tool fails to detect my phone. I followed the guide thoroughly but the tool shows "Waiting for USB Port..." two times and then "none usbport, maybe driver not installed". My phone shows white LED when I connect it as per instructions in OP.
Click to expand...
Click to collapse
Battery must be removed !! When doing backup through miracle.
You have to press vol. Down button multiple times when device is connected with laptop.

Francesco Franz said:
Battery must be removed !! When doing backup through miracle.
You have to press vol. Down button multiple times when device is connected with laptop.
Click to expand...
Click to collapse
I did remove the battery. Also, do you need to press the volume up button or down? I pressed the start button as soon as COM & LPT disappeared from Device Manager. I also tried to press the volume down button multiple times as instructed by you but still no success.

Can someone please share the stock backup of XT1760 taken using this method?

gururoop said:
Can someone please share the stock backup of XT1760 taken using this method?
Click to expand...
Click to collapse
why did you brick while flashing recovery ? didn't you make a backup before flashing ? either way since there are so many SKU versions it would be better to make your own backup .
if your phone isn't booting after twrp it is because you didn't flash the no dm-verity zip
if the one you got isn't working try the no dm-verity and good instructions for installing in my thread for SKU xt1762 ....
to reboot to recovery hold power and volume down ...you won't go directly to recovery but first to bootloader ...using the volume key "scroll" until you see it says recovery and select that option using power button
when in recovery flash no dm -verify zip
don't flash stock files from my post cos I think they might not be cross compatible between variants for stock only custom roms .
otherwise download a scatter file and stock rom from google and the interwebs and flash your phone using sp flashtools and scatter file .

KevMetal said:
why did you brick while flashing recovery ? didn't you make a backup before flashing ? either way since there are so many SKU versions it would be better to make your own backup .
if your phone isn't booting after twrp it is because you didn't flash the no dm-verity zip
if the one you got isn't working try the no dm-verity and good instructions for installing in my thread for SKU xt1762 ....
to reboot to recovery hold power and volume down ...you won't go directly to recovery but first to bootloader ...using the volume key "scroll" until you see it says recovery and select that option using power button
when in recovery flash no dm -verify zip
don't flash stock files from my post cos I think they might not be cross compatible between variants for stock only custom roms .
otherwise download a scatter file and stock rom from google and the interwebs and flash your phone using sp flashtools and scatter file .
Click to expand...
Click to collapse
No, I didn't brick my device. Actually, I wasn't able to backup my stock ROM using this guide, so I flashed TWRP and backed up my stock ROM using that. I just need stock backup so that I can go back to pure stock if required.

gururoop said:
No, I didn't brick my device. Actually, I wasn't able to backup my stock ROM using this guide, so I flashed TWRP and backed up my stock ROM using that. I just need stock backup so that I can go back to pure stock if required.
Click to expand...
Click to collapse
if you backed up using twrp why would you need pure stock ? there is very little chance you would need stock recovery and boot because you are way more likely to get Oreo via custom rom .....the backup you made in twrp is more than enough in my opinion ...anyways

KevMetal said:
if you backed up using twrp why would you need pure stock ? there is very little chance you would need stock recovery and boot because you are way more likely to get Oreo via custom rom .....the backup you made in twrp is more than enough in my opinion ...anyways
Click to expand...
Click to collapse
The main reason is stock recovery, even stock boot was backed up by TWRP. Stock phones get higher rates while reselling.

There is an OTA update notification in my XT1760 in India. Can anyone please share the stock recovery?

gururoop said:
There is an OTA update notification in my XT1760 in India. Can anyone please share the stock recovery?
Click to expand...
Click to collapse
Which patch?

gururoop said:
I did remove the battery. Also, do you need to press the volume up button or down? I pressed the start button as soon as COM & LPT disappeared from Device Manager. I also tried to press the volume down button multiple times as instructed by you but still no success.
Click to expand...
Click to collapse
@gururoop
Buddy here you done a small mistake. Also you don't bother to read whole thread in a respective manner just scrolling and scrolling. When COM & LPT disappear from device manager. You need to press start button in miracle tool not the vol. Down or up or power button any more. As present COM & LPT port disappears a new port has been established as soon as you press the start button in miracle tool. In first attempt COM &LPT contain MTK USB Port driver as soon as it's removed a new port appears, the actual driver software we need MTK Preloader usb com port#7. Hope you understand it very well

Francesco Franz said:
@gururoop
Buddy here you done a small mistake. Also you don't bother to read whole thread in a respective manner just scrolling and scrolling. When COM & LPT disappear from device manager. You need to press start button in miracle tool not the vol. Down or up or power button any more. As present COM & LPT port disappears a new port has been established as soon as you press the start button in miracle tool. In first attempt COM &LPT contain MTK USB Port driver as soon as it's removed a new port appears, the actual driver software we need MTK Preloader usb com port#7. Hope you understand it very well
Click to expand...
Click to collapse
I read the OP thoroughly and followed the instructions to the letter. But somehow I failed to backup my device. That is why I have been continuously requesting you to share the stock backup if possible for you. Please oblige if not too inconvenient for you. We are here to help each other.

Hello guys,
can I use this method for my moto XT1771. My Androind version is 7.1.1 .Thanks.

Lenovo K8 Note Red State Bootloop After Flashing Custom Recovery

Hello Guys,
The issue is that i wanted to root my lenovo k8 note so follow this link "https://forum.xda-developers.com/android/development/tutorials-how-to-root-lenovo-k8-note-t3685502", Everything works file but in last rooting step no. 9
9. If you see internal storage 0mb Then GoTo Wipe and FORMAT DATA once & reboot to recovery
but in my device there has memory 59999mb so i ignored and reboot using twrp but it says no OS installed
and shows orange state, then i format phone using twrp but nothing happens again orange state and no os installed.
then i found another article with same issue "https://forum.xda-developers.com/android/help/lenovo-k8-note-stuck-boot-logo-flashing-t3751324/post75974342#post75974342" and found this
The bootlogo issue.
Hey! I read your post regarding your k8 note being stuck at the bootlogo.
Consider that you can still use TWRP, boot into it.
Then go ahead and download the SuperSU zip on your PC/laptop and connect your phone with a USB. You might be able to see the SD card folders on your PC, then you can just copy and paste it to the internal sd and flash it. You'll be good to go. If that doesn't work, in the TWRP Mode, go to advanced and select ADB sideload. You can now flash using ADB sideload.
Search for tutorials on ADB sideload. It's easy and that should work.
Click to expand...
Click to collapse
solution over there and flash supersu but nothing happens.
After so many try i locked oem bootloader in fastboot using command "fastboot oem lock", after this my lenovo k8 note show Red State.
Now i am not able to do anythig please help me out.
Basically my device is stuck at the bootloop with the
Red State
=> "Your Device has fail to pass verification and may not work properly
your device will boot in 10 sec trusted
Your device will boot in 5 seconds"
definitely I must have screwed up something.
Please help me to boot my Lenovo K8 note in normal mode.
Thanks

beingfhd said:
Hello Guys,
The issue is that i wanted to root my lenovo k8 note so follow this link "https://forum.xda-developers.com/android/development/tutorials-how-to-root-lenovo-k8-note-t3685502", Everything works file but in last rooting step no. 9
9. If you see internal storage 0mb Then GoTo Wipe and FORMAT DATA once & reboot to recovery
but in my device there has memory 59999mb so i ignored and reboot using twrp but it says no OS installed
and shows orange state, then i format phone using twrp but nothing happens again orange state and no os installed.
then i found another article with same issue "https://forum.xda-developers.com/an...-flashing-t3751324/post75974342#post75974342" and found this solution over there and flash supersu but nothing happens.
After so many try i locked oem bootloader in fastboot using command "fastboot oem lock", after this my lenovo k8 note show Red State.
Now i am not able to do anythig please help me out.
Basically my device is stuck at the bootloop with the
Red State
=> "Your Device has fail to pass verification and may not work properly
your device will boot in 10 sec trusted
Your device will boot in 5 seconds"
definitely I must have screwed up something.
Please help me to boot my Lenovo K8 note in normal mode.
Thanks
Click to expand...
Click to collapse
Are you okay with losing your data on your phone? If yes then go ahead and flash stock ROM with sp flash tool. And about your problem, I guess you wiped the /system partition as well that's why it was showing no os installed.
Another thing is that if you install twrp Do not boot up your phone, boot up into twrp by pressing volume up and power button at the same time you'll need to flash magisk or supersu so that twrp can modify partition correctly.

Thanks
Anas Rahman said:
Are you okay with losing your data on your phone? If yes then go ahead and flash stock ROM with sp flash tool. And about your problem, I guess you wiped the /system partition as well that's why it was showing no os installed.
Another thing is that if you install twrp Do not boot up your phone, boot up into twrp by pressing volume up and power button at the same time you'll need to flash magisk or supersu so that twrp can modify partition correctly.
Click to expand...
Click to collapse
Thanks for the reply but i recovered it using flash stock rom.
But i have another ques that can i flash twrp without oem unlock?

beingfhd said:
Thanks for the reply but i recovered it using flash stock rom.
But i have another ques that can i flash twrp without oem unlock?
Click to expand...
Click to collapse
No you can't

k8 note stuck on bootloop...??
need help.....my k8 note was running oreo....thn i downgraded to nougat...duo to bugs on oreo... thn i was facing more problems... so i decided to flash oreo again. ... i was trying to flash...but i was getting some brom error...so i thought it might be due to unlocked bootloader... so i tried to lock it.. and then try... and the system got deleted.... i cant even access fastboot... but device is detecting on sp flash tool... but getting the same error... help buddy... its urgent.. my device is not turning on... but the led is working....

DeepRBasak said:
need help.....my k8 note was running oreo....thn i downgraded to nougat...duo to bugs on oreo... thn i was facing more problems... so i decided to flash oreo again. ... i was trying to flash...but i was getting some brom error...so i thought it might be due to unlocked bootloader... so i tried to lock it.. and then try... and the system got deleted.... i cant even access fastboot... but device is detecting on sp flash tool... but getting the same error... help buddy... its urgent.. my device is not turning on... but the led is working....
Click to expand...
Click to collapse
This might be helpful https://forum.xda-developers.com/k8-note/how-to/lenovo-k8-note-xt1902-3-fix-dead-hard-t3791839

thank u somuch am also mobile sevice man it help full for me
Anas Rahman said:
Are you okay with losing your data on your phone? If yes then go ahead and flash stock ROM with sp flash tool. And about your problem, I guess you wiped the /system partition as well that's why it was showing no os installed.
Another thing is that if you install twrp Do not boot up your phone, boot up into twrp by pressing volume up and power button at the same time you'll need to flash magisk or supersu so that twrp can modify partition correctly.
Click to expand...
Click to collapse

I have the same problem. please help us!

HARDROCK2614 said:
I have the same problem. please help us!
Click to expand...
Click to collapse
What problem do you have, please describe

I have lost all my mind and need serious help.
Recently, the march update came. i forgot that rooted phone should not be updated by the OTA update. And i did. As a result i got stuck in a bootloop. Then I had to use the oreo ROM from this forum and flashed it using SP Flash tool. It was a successfull flash. Then I used Maui META to write the IMEI for both sim. That was successfull too(Wifi and bluetooth addresses were working by themselves and i didnt write the serial number of the phone).
After working nicely for three days, i was using Whatsapp and a friend of mine sent me a .pptx file (powerpoint presentation). I opened it using WPS office app. I opened it multiple times in morning with no problems. But in the afternoon at about 2.53 PM while i was in my car, i was unable to open the file. The phone hanged. It heated up. To get out of the hang, i restarted the phone using the power button. IT DID NOT START. All it showed was the lenovo logo screen. And after doing more restarts, the phone went completely blank.
Now i cannot start it, or charge it. So i thought of flashing it again. But when i connect it to my PC, it keeps CONNECTING and DISCONNECTING. what i saw in the device manager was that the driver keeps changing very fast betwee MTK USB PORT and PRELOADER.
I found the solution to be updating the drivers manually. I did. Now the driver shows only DA USB VCOM and when it changes, it goes invisible in the PC and then appears back. Now when i start flashing, the first red progress bar appears as: Download DA 100%. and the flash hangs. After some time, this error will popup: ERROR: STATUS_UNKNOWN_STORAGE_TYPE (0xC0040009)
Please someone help me.

custom619 said:
Recently, the march update came. i forgot that rooted phone should not be updated by the OTA update. And i did. As a result i got stuck in a bootloop. Then I had to use the oreo ROM from this forum and flashed it using SP Flash tool. It was a successfull flash. Then I used Maui META to write the IMEI for both sim. That was successfull too(Wifi and bluetooth addresses were working by themselves and i didnt write the serial number of the phone).
After working nicely for three days, i was using Whatsapp and a friend of mine sent me a .pptx file (powerpoint presentation). I opened it using WPS office app. I opened it multiple times in morning with no problems. But in the afternoon at about 2.53 PM while i was in my car, i was unable to open the file. The phone hanged. It heated up. To get out of the hang, i restarted the phone using the power button. IT DID NOT START. All it showed was the lenovo logo screen. And after doing more restarts, the phone went completely blank.
Now i cannot start it, or charge it. So i thought of flashing it again. But when i connect it to my PC, it keeps CONNECTING and DISCONNECTING. what i saw in the device manager was that the driver keeps changing very fast betwee MTK USB PORT and PRELOADER.
I found the solution to be updating the drivers manually. I did. Now the driver shows only DA USB VCOM and when it changes, it goes invisible in the PC and then appears back. Now when i start flashing, the first red progress bar appears as: Download DA 100%. and the flash hangs. After some time, this error will popup: ERROR: STATUS_UNKNOWN_STORAGE_TYPE (0xC0040009)
Please someone help me.
Click to expand...
Click to collapse
I couldn't find more about the problem online, can you please upload a screenshot of the error. Try using the latest version of SP Flash Tool and see if the problem persists

I have lost all my mind and need serious help.
here are the screenshots. Note that the battery is in the phone always because i am unable to open the back cover. During the flashing process, i did not press the vol - button.
https://ibb.co/sq8knnj
https://ibb.co/VjqKQm3
https://ibb.co/4VkVPjs
https://ibb.co/cw2BzLC
https://ibb.co/kcjjJ74
Now in the following screenshots, i kept the vol - button pressed down. Note that the driver is stuck at preloader and not DA. Also the first bar is yellow color in both these cases. However, in the above situation, multiple files were flashed. But in this below situation, only this so called "flash" was done; that too unsucessful in the end.
https://ibb.co/1QKtsCb
https://ibb.co/Ssj58Zd

custom619 said:
here are the screenshots. Note that the battery is in the phone always because i am unable to open the back cover. During the flashing process, i did not press the vol - button.
https://ibb.co/sq8knnj
https://ibb.co/VjqKQm3
https://ibb.co/4VkVPjs
https://ibb.co/cw2BzLC
https://ibb.co/kcjjJ74
Now in the following screenshots, i kept the vol - button pressed down. Note that the driver is stuck at preloader and not DA. Also the first bar is yellow color in both these cases. However, in the above situation, multiple files were flashed. But in this below situation, only this so called "flash" was done; that too unsucessful in the end.
https://ibb.co/1QKtsCb
https://ibb.co/Ssj58Zd
Click to expand...
Click to collapse
The problem may be with your drivers, i see you have Preloader drivers only.
Follow this guide for installing drivers - https://forum.xda-developers.com/elephone-m2/help/windows-10-mtk-vcom-usb-drivers-32-64-t3267033

Anas Rahman said:
The problem may be with your drivers, i see you have Preloader drivers only.
Follow this guide for installing drivers - https://forum.xda-developers.com/elephone-m2/help/windows-10-mtk-vcom-usb-drivers-32-64-t3267033
Click to expand...
Click to collapse
So i did as you said brother. I don' t know how but something happened. The phone, after a long time actually displayed up. It showed the LENOVO logo and down in the corner two things came in written :
>device unlocked
>Tool DL image Fail
I googled it up and found that it requires to flash the phone with the DA DL option ticked. I did that but it does not flash. The error is same as follows:
https://ibb.co/Ssj58Zd
Can you please guide me in the flashing process? I think the mistake is very small but i don't know where i am missing.

I have lost all my mind and need serious help.
custom619 said:
So i did as you said brother. I don' t know how but something happened. The phone, after a long time actually displayed up. It showed the LENOVO logo and down in the corner two things came in written :
>device unlocked
>Tool DL image Fail
I googled it up and found that it requires to flash the phone with the DA DL option ticked. I did that but it does not flash. The error is same as follows:
https://ibb.co/Ssj58Zd
Can you please guide me in the flashing process? I think the mistake is very small but i don't know where i am missing.
Click to expand...
Click to collapse
Okay so what i figured out is that in this state: (battery plugged in, no notification LED response, no response on power or volume buttons) the driver you require is MTK USB PORT.
I updated to this driver manually, and guess what? the phone actually flashed. But three files remained and the process hanged. (system, cache and userdata)
Now i get the errors:
>device unlocked
>Tool DL image Fail
and sometimes: >device otp failed
I am trying to flash the rest three files individually. Lets see what happens.

custom619 said:
Okay so what i figured out is that in this state: (battery plugged in, no notification LED response, no response on power or volume buttons) the driver you require is MTK USB PORT.
I updated to this driver manually, and guess what? the phone actually flashed. But three files remained and the process hanged. (system, cache and userdata)
Now i get the errors:
>device unlocked
>Tool DL image Fail
and sometimes: >device otp failed
I am trying to flash the rest three files individually. Lets see what happens.
Click to expand...
Click to collapse
Try flashing wihtout these three files, then boot to fastboot mode by pressing POWER+VOL UP and choose fastboot mode then flash these three files with fastboot commamds

Anas Rahman said:
Try flashing wihtout these three files, then boot to fastboot mode by pressing POWER+VOL UP and choose fastboot mode then flash these three files with fastboot commamds
Click to expand...
Click to collapse
I.AM.DUMBFOUNDED.
During flashing this error occurred:
(yellow bar in SPFlash tool)
[recovery] Download Flash 100%
ERROR: STATUS_MMC_ERR (0xC0040030)
[HINT]:

custom619 said:
I.AM.DUMBFOUNDED.
During flashing this error occurred:
(yellow bar in SPFlash tool)
[recovery] Download Flash 100%
ERROR: STATUS_MMC_ERR (0xC0040030)
[HINT]:
Click to expand...
Click to collapse
Couldn't find much about the error, give this a try
https://forum.xda-developers.com/k8-note/how-to/lenovo-k8-note-xt1902-3-fix-dead-hard-t3791839
ALSO, in the last few screenshots you're using firmware upgrade option please choose downlaod only.
Join the Telegram group more people can help there - -
Join «Lenovo XT1902-1/2/3 (K8 Series) Official Chat Group» on Telegram: https://t.me/K8Official

Anas Rahman said:
Couldn't find much about the error, give this a try
https://forum.xda-developers.com/k8-note/how-to/lenovo-k8-note-xt1902-3-fix-dead-hard-t3791839
ALSO, in the last few screenshots you're using firmware upgrade option please choose downlaod only.
Join the Telegram group more people can help there - -
Join «Lenovo XT1902-1/2/3 (K8 Series) Official Chat Group» on Telegram: https://t.me/K8Official
Click to expand...
Click to collapse
I Already tried this thread you suggested. No outcome.

Anas Rahman said:
Couldn't find much about the error, give this a try
https://forum.xda-developers.com/k8-note/how-to/lenovo-k8-note-xt1902-3-fix-dead-hard-t3791839
ALSO, in the last few screenshots you're using firmware upgrade option please choose downlaod only.
Join the Telegram group more people can help there - -
Join «Lenovo XT1902-1/2/3 (K8 Series) Official Chat Group» on Telegram: https://t.me/K8Official
Click to expand...
Click to collapse
This group is possibly dead. No one has responded till today...