Hi Everyone,
I've got my Sony SW 3 on the 25th of December (XMAS =D) and noticed that sometimes the watch does not receive any notifications, even turning off the Bluetooth on my HTC One M8 should trigger the "Find my Phone" app, to tell me that the phone is disconnected, but it doesn't, no emails, sms, calls, nothing comes through, but on my phone, it does say that it is connected and on the watch as well.
What I tried on my phone:
Installed different ROMs, based on:
- CM12
- Official GPE 5.0.1
- HTC Sense 4.4.4
And of course, reset the watch with every new ROM installed.
This happens randomly and the only way to fix, is to restart the watch. On the 2 weeks that I've owned this watch, this happened around 4 times.
Is anyone having the same issue? I suspect the app FACER, it's always after I tweak the watch face that after a while the watch start having this behavior.
Let me know your thoughts.
Thank you and have a happy new year =)
hugoprh said:
Hi Everyone,
I've got my Sony SW 3 on the 25th of December (XMAS =D) and noticed that sometimes the watch does not receive any notifications, even turning off the Bluetooth on my HTC One M8 should trigger the "Find my Phone" app, to tell me that the phone is disconnected, but it doesn't, no emails, sms, calls, nothing comes through, but on my phone, it does say that it is connected and on the watch as well.
What I tried on my phone:
Installed different ROMs, based on:
- CM12
- Official GPE 5.0.1
- HTC Sense 4.4.4
And of course, reset the watch with every new ROM installed.
This happens randomly and the only way to fix, is to restart the watch. On the 2 weeks that I've owned this watch, this happened around 4 times.
Is anyone having the same issue? I suspect the app FACER, it's always after I tweak the watch face that after a while the watch start having this behavior.
Let me know your thoughts.
Thank you and have a happy new year =)
Click to expand...
Click to collapse
Hmmm....
I'm sure that you have done this already, but just in case--are you giving the watch access to notifications? (settings > security > notification access > checkbox)
gtriamy said:
Hmmm....
I'm sure that you have done this already, but just in case--are you giving the watch access to notifications? (settings > security > notification access > checkbox)
Click to expand...
Click to collapse
Sorry for the late reply, but yes, that was checked as well and found out it was the Facer app that was causing the issues, for now, what I'm doing is, after using this app, I just restart the watch and that is it, no problems until I use it again once a face watch is set, no need to open Facer again, so no big issue
Thank you for the support =)
Good morning everyone,
I have a problem. I bought Nexus 6p and I would use it with my motorola moto 360 second generation. The problem is that only the calls coming to the clock, no notifications email, message, social ect....
I have factory reset, but nothing!Can someone help me?
Thank you
Danila
First make sure that on your phone in settings-apps-android wear all the permissions are set.
Go to settings-battery click the 3 dots and select battery optimization. Select to show all apps and change android wear to not optimized. This will keep it from dozing.
Note that the watch on!y receives notifications if your phone displays them.. By this I mean it will not notify if the phone is set to Do Not Disturb/Priority/ etc... If you are getting the notification on your phone but not your watch (and you are connected) that is an issue.
Sent from my SHIELD Tablet using Tapatalk
Hello ,
I have a new asus smartwatch 3 and oneplus 3t.
The issue that i have that when i'm using the phone and i recieved a notification ,it is showed on my smartwatch and the phone.
I think is it smart , and the notification should be showed only on the phone's screen when i'm using it.
In other words i want that the notifications showed only if i'm not using the phone.
Is it possible ?
Envoyé de mon ONEPLUS A3003 en utilisant Tapatalk
There is no "Asus Smartwatch 3". Perhaps you are referring to the ZenWatch 3? The forums for that device can be found here: https://forum.xda-developers.com/zenwatch-3
Anyway, I don't believe there is a way to disable notifications on the watch only when you are using your phone. You can prevent apps from sending notifications to your watch, though, while receiving the notifications on your phone; this is permanent, though, meaning that you will never receive notifications from those apps on your watch, lest you re-enable notifications for those apps in the WearOS app.
Hello all,
It seems i have a issue with my 6 month old Galaxy Watch 46mm, 1 week after the ONE UI update, all sensors (accelerometer, gyro and HR sensor) stopped working, only the ambient light sensor was working.
So i had no more step counter, turn your wrist to wake the screen (the one i missed the most), HR monitor, nothing.
After couple of restarts, 3 factory resets and waiting for 2 days, all sensors started working again.
Everything was fine for 1 week.
And now since 3 days ago the issue reappeared. no restarts, factory resets, hard restarts helped, till now.
What I noticed is if the Watch is powered OFF and charging the screen rotates accordingly, but if it is powered ON, the screen remains in the same position as it is on your hand, it does not turn 90 degrees.
So for me it seems to be a software/firmware bug.
Does anyone else have this issue?
How did you solve it?
Thanks
Hi,
i have similar problem on my GWA (SM-R500).
Now its four days and many restarts/Factory resets since my sensors died...
I was on Vacation/camping when my last HR reading history shows it happens while sleeping... I've noticed this next day when going for a walk and no notifications go to my watch (i've set to send notifications to watch only when wearing and not using phone). Then noticed that HR sensor is not blinking (set to always on). So i've tried to switch on manual and it starts measuring but in the end shows a "generic" error message (Can't read, try again) - no "dirty sensor" or similar messages... https://www.youtube.com/watch?v=9zo4pOisX_k
Now when i'm at home and searching for help and found this thread. So i've edited my Watchface to test other sensors (accelerometer, gyro) and they dont show any movement either...
I've tried even switch different options in the menus (like detecting workouts, sensors authorisations, etc) what i've found that helped others, but no avail...
According to Galaxy Wearable app i'm runing latest FW
OneUI v1.0
Tizen 4.0.0.3
FW R500XXU1BSD3
a new 15 MB update seems to be comming out,
Samsung’s changelog for the update read:
• Improved system reliability
• Disabled automatic sync of alarm from paired smartphone or watch
• Improved tracking for swim
maybe it will also make our sensors alive again ?
Question is when it will be out in EU
no clue, is it only for US? i am in Europe/Romania also
btw, my sensors started workin for 1 whole day, then went dead again, and now for the last 5 days, they are working 1 hour in 24 hours...which is kind of nice ?? just kidding
It looks like its update only for your (R800) type of watch... My R500 don't have any new update since April...
I'm thinking if there is some way to downgrade Samsung Health because last day it drain my battery in 22 hours, so i think problem is there...
BRazvy said:
a new 15 MB update seems to be comming out,
Samsung’s changelog for the update read:
• Improved system reliability
• Disabled automatic sync of alarm from paired smartphone or watch
• Improved tracking for swim
maybe it will also make our sensors alive again ?
Click to expand...
Click to collapse
Well, it really screwed up the floor count. There's another thread on this here but I normally don't get any counts. Today without climbing any floors at all, I have 173 floors.
I've tried Samsung's CZ Tech support and they responded, that this problem (at least my version) is really caused by last update of SHealth app, they know about it, but sadly there is no way to rollback to previous version, se we must only wait for new update
BRazvy said:
a new 15 MB update seems to be comming out,
Samsung’s changelog for the update read:
• Improved system reliability
• Disabled automatic sync of alarm from paired smartphone or watch
• Improved tracking for swim
maybe it will also make our sensors alive again
Click to expand...
Click to collapse
True that
---------- Post added at 12:45 PM ---------- Previous post was at 12:44 PM ----------
ententeak said:
It looks like its update only for your (R800) type of watch... My R500 don't have any new update since April...
I'm thinking if there is some way to downgrade Samsung Health because last day it drain my battery in 22 hours, so i think problem is there...
Click to expand...
Click to collapse
Yep, my friend has the same problem
whenever i reset my watch to factory settings, the latest samsung health version appears as an update, but i left it with the older version for days, and it still didn't help, are we talking about a much earlyer version?
BRazvy said:
whenever i reset my watch to factory settings, the latest samsung health version appears as an update, but i left it with the older version for days, and it still didn't help, are we talking about a much earlyer version?
Click to expand...
Click to collapse
Thats why i said "At least my version". I have different model (Galaxy Watch Active vs Galaxy Watch 46mm) than you, but similar error...
BTW: today i've wakeup with them "dead" - after 1 day and 10 hours in "battery saver mode" was battery drained from 100% to 0% mostly by SHealth app..
ententeak said:
I've tried Samsung's CZ Tech support and they responded, that this problem (at least my version) is really caused by last update of SHealth app, they know about it, but sadly there is no way to rollback to previous version, se we must only wait for new update
Click to expand...
Click to collapse
ententeak said:
Thats why i said "At least my version". I have different model (Galaxy Watch Active vs Galaxy Watch 46mm) than you, but similar error...
BTW: today i've wakeup with them "dead" - after 1 day and 10 hours in "battery saver mode" was battery drained from 100% to 0% mostly by SHealth app..
Click to expand...
Click to collapse
seems you will get the update also:
https://www.reddit.com/r/GalaxyWatch/comments/cgplgu/new_update_on_my_gwa/
Sadly not yet available in CZ
ententeak said:
Sadly not yet available in CZ
Click to expand...
Click to collapse
got the update 2 days ago, installed it,but nothing changed...
but about 1 week ago, i deleted the Alti-Barometer widget and then uninstalled the Alti-Barometer App thatcomes from the factory, and after several restarts everything started working, except for the floor count, which i can leave without, other sensors still working after 1 week, without any issues
also tested this again after the SW Update from 2 days ago, watch reset, tried to configure Alti Barometer app, sensors crashed, deleted Alti-Barometer app, 5 restarts plus several shutdowns later, everything started working again
so i am 99% happy now, maybe this post will help others
P.S. also with latest Samsung Health App installed, everything besides floor count works fine.
Good to know & glad it's sorted! Cheers
i "forced" that update with changing CSC code from XEZ (CZ) to XAR (US) and get the Tizen 4.0.0.5 update and no luck either... (Changing XAR to XEZ was a little pain in the ass because they use different WiFi bands so i've needed to reconfigure my router to be able to connect to sdb)
and GWA don't have Alti-barometer preinstalled, so i've tried to install it, calibrate (via GPS), tried to measure pressure (no data), tried few restarts with no luck... Now, when Alti-Bar uninstalled, i'm trying more restarts without change...
The sensors are dead even in the service menu (*#0*#)
(BTW: i've got since my last reply 2 days working, one day not and then 5 days in a row when it worked. Then dead again, so i've tried that CSC-updated method...)
Hi all.
I bought a Galaxy Watch 46mm in April 2019 and updated recently :
SM-R800
One UI 1.0
Tizen 4.0.0.4
R800XXU1CSE1
For my part I have the following problem: the number of floors climbed is completely wrong for several weeks now. I do not know if it's from the One UI 1.0 version but when i bought it it worked fine.
So according to you it comes from Samsung Health and not the OS, firmware?
Have you tried to go back on updating the watch by trying to flash it with a previous version?
My watch is still under warranty samsung.
It was sent for repair and they changed the brightness sensor which of course did not change anything !
Attached a screenshot of my watch : you can see 72 floors climbed on the 05/08/2019...
Thank you for your feedback.
I have the sensor issues (HR, lift-to-wake, step count, et al) for almost two months now. countless reboots didn't fix my problem. I then read somewhere that completely switching off the watch, or turning it to 'watch only' mode for 2-3 days fixes the problem. I did just that and voila! Everything works fine. UNTIL, I went to the gym and recorded my workout. I stopped recording my workout and all sensors died again. Followed the process once again, made sure not to record my workout again but it auto detected it this time and died again. I'll turn on my watch again over the weekend to see if the issue auto-fixes again, but I think I have identified atleast one thing that causes this incredibly annoying issue!
EDIT: I've read a lot of people (both on this thread and otherwise) mentioning how the Health app is the culprit. Does anybody have an apk of a previous version to test out this theory?
I give a shot to the "Watch-only mode"... and after few minutes in that mode, turned back on and its working
Edit: it was working for almost same time as it was turned off :/
BTW: I was asking at Samsung's support if there is some way how to rollback (at least like on any android phone - uninstall all updates for default apps) and she say there is no other way than "Factory settings"
If u uninstall Alti Barometer app all works except floor counts. But if u live in building on 4th floor when u go to the apartment gyro sensors goes off and stop working. The same situation is when u go down from 4th floor. Then u must restart GW (on ground or apartment) to start sensors working. Frustrated.
So. Finally decided to move away from a Casio hand watch and MiBand 4 to Huawei Watch GT2Pro.
This wasn't an easy decision as I know Huawei's LiteOS isn't android GearOS but from all the list of pros and cons, I think it wasn't such a bad decision.
Of course the Russian Internet trolls will constantly throw the same topics about Huawei's watch in the comments in social media that "No NFC?!" and "Can't install apps! Samsung is the best" but I have just realised that I just don't really need it.
It is always a case of ticking off the boxes when buying something that has a long list of requirements.
But. Anyway.
As in the topic. There is only one thing which does really bother me.
When a text message (or What's App message) arrives to my phone (Huawei P20Pro) I do get the notification on the phone and the notification on my watch.
If I will clear the notification on the Huawei Watch GT2 Pro, the notification about new text message will still remain "unread" on my phone.
And sadly, I can't get over it and can accept that it works this way.
Can anyone recommend anything to fix it?
I do understand that so far this is how this works out of the box, but I am hoping that there might be an additional app (like Miband tools for MiBand) or at least any contact to Huawei to raise it as a concern/complain?
I have tried speaking to Huawei UK customer service but sadly, they are just the customer service for distribution and the only thing that was offered to me was an opportunity to return the watch.
I have also tried to find any info about HarmonyOS 2.0 and if it would actually be coming live any time soon, but this topic seems to be:
a) dead
b) delayed to the point that any news are just YT oriented views-focused sh** videos
c) nowhere an info to confirm for sure that this system would be available for GT2Pro
anyone may help?
Even to help where to send an email for Huawei to even "consider" that this is really essential for the watch to be "almost perfect"?
No action on notifications from Huawei Watch. Huawei just display the notification when arrive on phone. Even if you delete this notification on your phone this stay on your watch. (and of course if you delete from the watch they stay on phone) You must delete 2 times
On Amazfit watch the notification on watch match the phone notification and if you delete on watch they are also delete on phone (but just delete, no read mark )
I own a GT2 Pro since yesterday and thats what is annoying me also. Could you find out any solution?
Otherwise I'm thinking of returning the watch. I really like the watch, but the notification issue is annoying
Got mine today. The notification thingy is the only prob that bugs me. Other than that I am ready to retire my old Ticwatch Pro. Hope the promised os update from liteos to harmonyos fixes this problem. Other than that, a beautiful watch with great battery life!
Hope that after the launch of hw3, the harmony update for gt series rolls out soon!
HUAWEI Watch 3 with Harmony OS set to launch on June 2
The HUAWEI Watch 3 is set to launch alongside Harmony OS on June 2. The flagship smartwatch could bring eSIM support and a long battery life.
www.androidauthority.com
Notification management is not good enough on Huawei watches. HarmonyOS is even less finished OS.
notification won't light up the screen
notification dismissed from the watch won't be dismissed from the phone and vice versa
notifications don't have the specific app icons except few
can't reply to notifications with custom text except few messengers on Watch3
calls from messengers won't get a notification or popup screen at all
some notifications come twice
so a year later there is nothing new.
edmun said:
so a year later there is nothing new.
Click to expand...
Click to collapse
yeah this is valid for both GT2, GT3 and Watch3. I look at all the changelogs. Given the fact that Watch3 is pretty dumb, i wanted to downgrade to GT2Pro. But GT2 has one more issue: cannot display emojis.