Develop Bugs

[ROM][JB4.2.2]Unofficial Cyanogenmod 10.1 for Ascend Mate 2014.05.11

After some work here is my first rom for Mate.
I AM NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE. DO IT AT YOUR OWN RISK.EVERYTHING WRITTEN IN THIS DOCUMENT WAS TESTED ON MY PHONE.​
Stable and suitable for daily use .
Development Finished.
Working:
Audio
Wifi
Display
Led
GPS
Network
Wifi HotSpot
Bluetooth
Youtube HD.
USB
Multiuser
Pie-control
Compiled kernel using surdu_petru's P6 cyanogenmod kernel source.
Camera
Camera Recording (SD, HD720p, HD1080p)
DLNA
DolbyDigital Plus
Facelock
Non-Working :
- FM Radio
- USB Mass_Storage mode (MTP mode is usable without issues)
Known-bugs:
Camera HDR function is not working.
changelog 2014.05.11:
- Added OTA update possibilities.
- Fixed display physical size in kernel.
- Fixed Mediascanner crash
- Fixed MTPserver crash
- Fixed dpi reported by gralloc
changelog 2014.05.04:
- Fixed delay in Youtube HD play/pause.
- Added DLNA
- Added Facelock
- Added Dolby Digital Plus
changelog 2014.05.02:
- Fixed Camera
- Added CPU Governors to kernel (lazy, hotplug,wheatley)
- Kernel modifications (IO Scheduler, memory,minor config changes)
changelog 2014.04.20:
- Fixed PPTP VPN
- Fixed airplane mode switching. Now correctly registers to network after airplane mode.
- Fixed signalstrength , now it is correctly shown both in statusbar and in about phone.
changelog 2014.03.16:
- using compiled vold instead of prebuilt.
- Fixed internal sd handling. Now the main user files accessible only by the owner , second and third users files are separated correctly .
- Fixed USB OTG function. It supports pendrive with ntfs , exFat filesystems too because of the new compiled vold.
- Fixed liboverlay logcat errors.
- Increased headset volume (Thanks to acbka)
changelog 2014.03.10:
- changed to compile kernel from source at build time instead of using prebuilt kernel.
- fixed notification led color (our device does not support blue)
Download:
cm-10.1-20140511-UNOFFICIAL-hwmt1_u06.zip
Install it from permanent twrp recovery , and do not forget to do a wipe .
Use this Google Apps package : Google Apps
Sources : https://github.com/joestone/Huawei-MATE-CM10.1
Thanks to surdu_petru , CyanogenMod Team.

great work ,downloaded

works with the camera app Camera 360?

Thanks joe.stone somethig news
Inviato dal mio MT1-U06 utilizzando Tapatalk

Thanks for your hard work mate, it looks great, but I have a question for you (or anyone who used this ROM): is the audio volume higher with headphones than the stock rom? Because in stock it's very very low in maximum volume.

Shadowprince94 said:
Thanks for your hard work mate, it looks great, but I have a question for you (or anyone who used this ROM): is the audio volume higher with headphones than the stock rom? Because in stock it's very very low in maximum volume.
Click to expand...
Click to collapse
Here is a little TUT to solve your problem.
Click
greez Gadlion

Gadlion^1 said:
Here is a little TUT to solve your problem.
Click
greez Gadlion
Click to expand...
Click to collapse
Yes, but these are not really good solutions, sound is far more better and louder in custom roms.
EDIT: I made some changes in the method, and it works well.

this rom works app 360 camera and flash it???
Thanks.

ErSergi said:
this rom works app 360 camera and flash it???
Thanks.
Click to expand...
Click to collapse
Try it make a backup from your android, and try, you have nothing to lose.

Shadowprince94 said:
Try it make a backup from your android, and try, you have nothing to lose.
Click to expand...
Click to collapse
but if anyone has installed this rom you could try and get more!

Shadowprince94 said:
Thanks for your hard work mate, it looks great, but I have a question for you (or anyone who used this ROM): is the audio volume higher with headphones than the stock rom? Because in stock it's very very low in maximum volume.
Click to expand...
Click to collapse
hi , try my way http://4pda.ru/forum/index.php?s=&showtopic=475994&view=findpost&p=27064535 Russian forum

Tnx for your hard work dude keep on and god bless you

I have faith in you. Keep up the good work.

is it possible to make custom kernel compatible with cm10 so that we can try the p6 roms. It seems only touch driver is different for HAM kernel so is it possible to add touch driver to existing p6 kernels?

svvv said:
is it possible to make custom kernel compatible with cm10 so that we can try the p6 roms. It seems only touch driver is different for HAM kernel so is it possible to add touch driver to existing p6 kernels?
Click to expand...
Click to collapse
The touch driver is different , there is some differencies in camera . The audio is slightly different .
Once I will be able to compile a working touch driver loadable with insmod we will have kitkat.

joe.stone said:
The touch driver is different , there is some differencies in camera . The audio is slightly different .
Once I will be able to compile a working touch driver loadable with insmod we will have kitkat.
Click to expand...
Click to collapse
Not the KitKat one i was referring to 4.2.2 version. I installed p6 green kernel which is a CM compatible kernel in that touch is not working. is it possible to make a similar one for our HAM

svvv said:
Not the KitKat one i was referring to 4.2.2 version. I installed p6 green kernel which is a CM compatible kernel in that touch is not working. is it possible to make a similar one for our HAM
Click to expand...
Click to collapse
It is done , now based on P6 Cyanogenmod (green) kernel.
First post updated.

joe.stone said:
It is done , now based on P6 Cyanogenmod (green) kernel.
First post updated.
Click to expand...
Click to collapse
Thank you so much for your hard work joe.stone.....

google store not working
the google store isnt letting me install or update any of my apps. help please

noobK1user said:
the google store isnt letting me install or update any of my apps. help please
Click to expand...
Click to collapse
Did you install the correct Google Apps package (see first post) ?
Did you wipe / factory reset before ROM install ?

SOUND MOD for Xperia M NOUGAT (AOSP AND CM 14.1)

Just info for everyone that use AOSP NOUGAT or CM14.1 on xperia m, i've found sound mod that working perfectly on this device, i've tested used for a few days, and there is no bug (in my case) but i think i it won't
I used Deuteronomy™ 2.3.3 with Add-on (Dolby Atmos)
Original post and installation, you can see this:
http://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709
And this is the link for download soundmod and add-on (Dolby Atmos):
https://www.androidfilehost.com/?w=files&flid=106116

A.R.I.S.E, is one of the great tech in audio enhancement industry
and I tried
2.4 alpha 8-8
with atmos
works better then meli

Godlydevils said:
A.R.I.S.E, is one of the great tech in audio enhancement industry
and I tried
2.4 alpha 8-8
with atmos
works better then meli
Click to expand...
Click to collapse
Of course, i've installed on cm13 till cm14.1...

[MOD][8.0.0] Aldeon Surround Sound Mod Oreo Edition

It's me again with the Oreo Edition of Aldeon Surround Sound Mod
Download the attachment, go to /system/etc and rename the existing mixer_paths_0.xml to mixer_paths_0.xml.bak then copy the new mixer_paths_0.xml and change the permissions to rw-r--r-- or 0644.
It won't damage your earpiece so keep calm
Features:
- louder than stock
- left and right channels
- better for utilisation in landscape
- now clicks will work in "surround mode"
To download on mobile just use Chrome, long press on attachment and click "Download link".
To adjust the volumes:
- open /system/etc/mixer_paths_0.xml
- search for "Output volume stage" then look at the "gain-media-speaker" path
- decrease or increase by 2 or more (not recommended) the "46" and "36" values (2 values for HPOUT3 and 2 for AIF4TX) to the values you want
Don't ask me "Does this mod work on XYZ ROM?". The answer is "I don't know, test and report!".
It should be compatible with all models.
Compatible with all 8.0.0 ROMs.
Possibly compatible with S7
If you want to use this in your ROM, give me the proper credits and you are done.
Credits to @AlexisXDA for his original work on the 7.0 Surround Sound. After converting his changes to a "patch" I was able to apply that "patch" to our mixer_paths_0.xml. It needed a lot of testing.

Nice work. Will be useful in the near future

rifek4 said:
Nice work. Will be useful in the near future
Click to expand...
Click to collapse
minealex2244 said:
It's me again with the Oreo Edition of Aldeon Surround Sound Mod
Download the attachment, go to /system/etc and rename the existing mixer_paths_0.xml to mixer_paths_0.xml.bak then copy the new mixer_paths_0.xml and change the permissions to rw-r--r-- or 0644.
It won't damage your earpiece so keep calm
Features:
- louder than stock
- left and right channels
- better for utilisation in landscape
- now clicks will work in "surround mode"
To download on mobile just use Chrome, long press on attachment and click "Download link".
To adjust the volumes:
- open /system/etc/mixer_paths_0.xml
- search for "Output volume stage" then look at the "gain-media-speaker" path
- decrease or increase by 2 or more (not recommended) the "46" and "36" values (2 values for HPOUT3 and 2 for AIF4TX) to the values you want
Don't ask me "Does this mod work on XYZ ROM?". The answer is "I don't know, test and report!".
It should be compatible with all models.
Compatible with all 8.0.0 ROMs.
Possibly compatible with S7
If you want to use this in your ROM, give me the proper credits and you are done.
Credits to @AlexisXDA for his original work on the 7.0 Surround Sound. After converting his changes to a "patch" I was able to apply that "patch" to our mixer_paths_0.xml. It needed a lot of testing.
Click to expand...
Click to collapse
it worked correctly, but when it increases to the maximum, the music just pauses, and the volume goes down, what can it be?

LuizHBr said:
it worked correctly, but when it increases to the maximum, the music just pauses, and the volume goes down, what can it be?
Click to expand...
Click to collapse
I didn't have that issue but it could happen because of a "safety decrease" of volume so it won't damage your speakers.

Thanks you ???

On 8.1 no file found. Why

zeuszos said:
On 8.1 no file found. Why
Click to expand...
Click to collapse
There is.

minealex2244 said:
There is.
Click to expand...
Click to collapse
No

zeuszos said:
No
Click to expand...
Click to collapse
Then I have no idea.

Works on Lineage os 15! Thank you! Sound from earpiace at Max volume is a bit dissorted but not much

will try near future

zeuszos said:
No
Click to expand...
Click to collapse
Try in /system/vendor/etc
That's where it was for me (RR 8.1).
It works, but I don't know, sounds wrong in a weird way.
Thanks for your work anyway!

[MOD] Lenovo ZUK Z2 Pro - SoundMod DualSpeaker - (05/03/2018)- (MAGISK+TWRP)

Hello Everyone,
I hope you all are great...
I have received a post on my thread requesting a soundmod for Lenovo ZUK Z2 Pro - from user dimitar.petrunov
BIG Thanks to him for providing me the files and for his time in testing...
And Thanks to Co.okie4u for testing the MOD on AEX 5.1 Android Oreo 8.1...
PLEASE GIVE ME YOUR FEEDBACKS IN ORDER TO IMPROVE THE MOD...
!!! ALWAYS MAKE BACKUP OF YOUR FILES BEFORE REPLACING THEM !!!
No worries if you forgot to backup, I have uploaded the backup just in case...
Just extract the "Lenovo_ZUK_Z2_Pro_DualSpeaker.zip" and get the mixers and place them in your (system/etc) &
IMPORTANTLY set mixer permissions to 644 (rw-r--r--) ...
then reboot...
or
Flash "TWRP_Lenovo_ZUK_Z2_Pro_DualSpeaker.zip", it will place backup of original mixers and replace current mixers with Modded mixers...
(need Testers)
or
Use the Magisk Module "MAGISK_Lenovo_ZUK_Z2_Pro_DualSpeaker.zip"
(need Testers)
Let me know if you face any issues...
Google Drive: Lenovo Zuk Z2 Pro - SoundMod - DualSpeaker
IMPORTANT NOTICE:
This MOD can be used with Equalizers, even though this mod sets the phone to the loudest balanced volume gain...
Using Equalizers might cause crackles and noise which damage your earpiece if you don't fix it, to fix it either you adjust the other MOD settings by reducing the boost
or Adjusting my MOD by Opening mixer_paths_tasha.xml (Nougat) / mixer_paths.xml (Oreo)
and edit value 84 to 80 or less for earpiece and value 89 to 85 for speaker, change at your own risk...
Each Device and brand have different SAFE LEVELS however things to Consider AVOID NOISE and CRACKLES:
--- for earpiece: upto 10 value increase is safe (value 84 to 94 or 95 is Safe)
--- for Speaker: upto 10-20 value increase is safe (value 89 to 99-109 Approxed 100-110)
Keep in mind increasing the volume will cause you issues when using it with other sound mods such as Viper, Dolby, etc...
Code:
<path name="speaker">
...........................................
<ctl name="RX1 Digital Volume" value="89" /> <!--speaker-->
...........................................
<ctl name="RX0 Digital Volume" value="84" /> <!--earpiece-->
............................................
</path>
Don't Forget to say :good: THANKS :good: ...
And Please, your Feedbacks are important for futuristic updates to improve the MOD...

Changelog
(05/03/2018)
--- TWRP has been updated, it will backup your current Mixers in the same path with file name as "mixername.xml.bak0", if you flash TWRP file twice you'll lose your Original...
(28/02/2018)
--- Updated MOD to Full DualSpeaker (Both Speakers are not Active Always)...
(15/02/2018)
--- Magisk Module updated to support V15 and above...
(11/02/2018)
--- Fixed Sound issues in some application, It's kernel related as it's unable to utilize both speakers, (You now have Partial DualSpeaker, any application requesting ultra-low-latency will use Speaker only) wait till I release a fix ¯\_(ツ)_/¯...
(07/02/2018)
--- Mod for Android Oreo 8.1 Released, Credits go to XDA member Co.okie4u for testing & providing the new name and path of the mixer as well Original Mixers of Oreo to compare with the Nougat Mixers to verify MOD Compatibility...
(30/01/2018)
--- Mod Released...
(29/01/2018)
--- Started thread upon request from dimitar.petrunov...

Current Complaints:
--- None...
Current Requests:
--- None...
Currently Doing:
--- None....
Done:
--- Full DualSpeaker is possible now (Both Speakers are not Active Always)...
--- UPDATED MAGISK to V15 and above...
--- Fixed Sound issue, related to Kernel...
--- Mod Released...
Confirmed & Conclusions:
--- None...

Works on AEX 5.1?

jhobc said:
Works on AEX 5.1?
Click to expand...
Click to collapse
Backup and try, if it doesn't I'll take your mixers, modify them and add them here...

Doesn't work on AEX 5.1
I have modded the Magisk File and it's now working on AEX 5.1
I've uploaded it to my gdrive but cannot post the link because of required posts ??
*Edit2* -> goo.gl / dUuuZw

Co.okie4u said:
Doesn't work on AEX 5.1
I have modded the Magisk File and it's now working on AEX 5.1
I've uploaded it to my gdrive but cannot post the link because of required posts ??
*Edit2* -> goo.gl / dUuuZw
Click to expand...
Click to collapse
The modification is path, correct?

Dante63 said:
The modification is path, correct?
Click to expand...
Click to collapse
Yes sir and filename.

Co.okie4u said:
Yes sir and filename.
Click to expand...
Click to collapse
AEX 5.1 is Oreo?
Also, are the contents of the old original mixer same as the AEX 5.1 original mixers... You may find few additional lines, if you're unsure, please post your original mixers...
I'll be adding the fix in the drive in order to maintain any updates...
I'll add credits to you for the feedback...
As for the volume, I already mentioned which lines increases the volume...

Yes, It's Oreo. 8.1
For earpiece i think 87 is better but this can be set by everyone individually.
Nice mod. Thank you for your initial work Dante ??
*Edit*
The only difference is that the default value for RX0 Digital Volume in the AEX configfile is 89 in yours it's 84.

Co.okie4u said:
Yes, It's Oreo. 8.1
For earpiece i think 87 is better but this can be set by everyone individually.
Nice mod. Thank you for your initial work Dante ?
*Edit*
The only difference is that the default value for RX0 Digital Volume in the AEX configfile is 89 in yours it's 84.
Click to expand...
Click to collapse
you're talking about the default values defined at the top...?

Nope,
I really mean the speaker level you mentioned.
It's set to 89 in the default AEX config.
<path name="speaker">
...........................................
<ctl name="RX1 Digital Volume" value="89" /> <!--speaker-->
...........................................
<ctl name="RX0 Digital Volume" value="89" /> <!--earpiece-->
............................................
</path>

Co.okie4u said:
Nope,
I really mean the speaker level you mentioned.
It's set to 89 in the default AEX config.
Click to expand...
Click to collapse
89 for the earpiece distorts the audio while playing music(voice only output is fine). I believe a more valid reference for the value is the ZUI mixers file which I believe is not 89 but lower.

dimitar.petrunov said:
89 for the earpiece distorts the audio while playing music(voice only output is fine). I believe a more valid reference for the value is the ZUI mixers file which I believe is not 89 but lower.
Click to expand...
Click to collapse
I've said use 86/87.
I'm using 86 for the earpiece speaker and it's all fine.
In the AEX original file the value is set to 89! I've send the file to him to proof it.

Co.okie4u said:
I've said use 86/87.
I'm using 86 for the earpiece speaker and it's all fine.
In the AEX original file the value is set to 89! I've send the file to him to proof it.
Click to expand...
Click to collapse
Using AEX for reference is not a good indication for the correct volume level but I guess it all depends on your individual hearing loss. Pro tip: https://www.youtube.com/watch?v=qNf9nzvnd1k

Co.okie4u said:
Nope,
I really mean the speaker level you mentioned.
It's set to 89 in the default AEX config.
<path name="speaker">
...........................................
<ctl name="RX1 Digital Volume" value="89" /> <!--speaker-->
...........................................
<ctl name="RX0 Digital Volume" value="89" /> <!--earpiece-->
............................................
</path>
Click to expand...
Click to collapse
Hi, in which file I can change these values after installing it via Magisk?

With this mod installed (Magisk one) on AEX 5.1 the game Gods of Rome have no audio output.
Disabled the mod and the audio is back to normal.

jhobc said:
With this mod installed (Magisk one) on AEX 5.1 the game Gods of Rome have no audio output.
Disabled the mod and the audio is back to normal.
Click to expand...
Click to collapse
There is also a bug in WhatsApp. You can record audio messages but you can't play them. Mod disabled and it works. It's the only bug i've found so far.

jhobc said:
With this mod installed (Magisk one) on AEX 5.1 the game Gods of Rome have no audio output.
Disabled the mod and the audio is back to normal.
Click to expand...
Click to collapse
Co.okie4u said:
There is also a bug in WhatsApp. You can record audio messages but you can't play them. Mod disabled and it works. It's the only bug i've found so far.
Click to expand...
Click to collapse
My best guess it Kernel related,
I'll release the fix to the MOD by tomorrow...
Dual speaker will operate partially...
Any application requests audio policy the kernel unable to utilize both speakers will use one speaker...
Happened in Xiaomi devices...
UPDATE: forgive me all for not releasing it as a mentioned... I took a break and spent my time with my family... I'll release it Sunday...

Hello again,
Dante63 is there a patched version already?

[MOD][Magisk][Pie and Q] Dolby Atmos + and Viper4FX for MI9SE

Hello!
My audio mod has been totally revamped for being used with Q and Pie. Now it supports BOTH!
So yeah, let me explain what this mod does to your device:
FEATURES
- Based off @guitardedhero's Dolby Atmos for Pie+;
- Fixed some strange behavior that app could cause SystemUI FC's;
- Added some personal effects under the tab Music and Gaming;
- Added new mixer configs that fixes the audio cracking noise while using headphones via cable (ALL THANKS FOR THIS GOES AGAIN TO @pengus77. HE FIXES THE BEHAVIOR IN THE KERNEL);
- Toggleable Dolby Atmos button!
- TESTED ONLY ON CUSTOM PIE AND Q (NO MIUI) (if you want you can test it out and let me know if it works)
- Added Dual Speaker on both Pie and Q (will enable only if the device can handle it, for deleting every possibility of damaging the earpiece)
- NEW: ADDED Viper4FX 2.5.0.5 - Specific
KNOWN ISSUES:
None that I'm aware of. Let me know
Changelog: V1 (17/01/20):
- as per features;
- Initial public release;
Changelog: V2 (01/02/2019):
- Implemented Qualcomm audio codec for audio streaming and video recording / decoding (Quad DAC)
- Corrected the audio output (sound was too high)
- Corrected and fixed some strange behaviors of the app while using player apps (Poweramp users knows )
- Removed mixer_paths from the initial zip (was creating issues)
- Cleaned up source code, Magisk module
- Enabled and corrected all the voice of the menus, also made some modifications based on the ZTE Atom device (adapted to Grus)
Changelog: V3
- Updated libraries from latest update;
- Updated Quad DAC from scratch;
- Rewrote the dolby_audio_effects file;
- Adjusted medium and high freqs for all the presets;
Changelog: V3.5
- UPDATE: ADDED VIPER4FX - SPECIFIC for MI9SE (separate zip)
- UPDATE QUAD DAC - DOLBY APP TO LATEST VERSION;
- Wrote everything over ACDB for better flexibility and installation facility
- Pumped up volume over Speaker;
IMPORTANT:
IF Upgrading from the same rom to the updated one, just make sure to uninstall the mod BEFORE doing so. You'll bypass a badly bootloop caused by dolby service. I'll fix in the next version if I can
ALSO: ORDER OF INSTALLATION FOR LATEST VERSION DOESN'T MATTER! Just install ACDB first, then choose either dolby, viper or BOTH! Also, you can use those mods by themselves, but I recommend install ACDB on top of the other audio mod. Enjoy
Download Link of V1
Download link of V2
Download link of V3
Download folder for V3.5 + Viper4FX 2.5.0.5 + ACDB

Tested on the last xiaomi.eu dev (Q), is installed and then uninstalled. I’m waiting for the xiaomi.eu dev version. (Q). Thanks

Testing on xiaomi.eu stable V11.0.3.0.PFBCNXM_v11-9
Sound goooooooood

ripelag said:
Tested on the last xiaomi.eu dev (Q), is installed and then uninstalled. I’m waiting for the xiaomi.eu dev version. (Q). Thanks
Click to expand...
Click to collapse
Okay, Making a Q version right now! Gonna publish here when it's ready

cioce said:
Testing on xiaomi.eu stable V11.0.3.0.PFBCNXM_v11-9
Sound goooooooood
Click to expand...
Click to collapse
Glad to hear that it's working well for you! :good:

tested on the latest derpfest rom and magisk 20.1
music sounds good but the notification sounds are distorted :/
thx
regards

mr.b4rt said:
tested on the latest derpfest rom and magisk 20.1
music sounds good but the notification sounds are distorted :/
thx
regards
Click to expand...
Click to collapse
Have you tried to change the notifications? I tried it too and I didn't had any problem at all

Zero_One said:
Have you tried to change the notifications? I tried it too and I didn't had any problem at all
Click to expand...
Click to collapse
yes changed it but every notification/ringsounds were distorted

Just to inform you guys, I made a special version for all of you who are using Q roms (Like Weekly Xiaomi.EU etc.)
Link is avaiable in the first post. It doesn't contain Dolby Atmos but will use ICESound (HUGE Shoutout to @icewizard for his mod) instead, with my own very personal optimizations. Enjoy!

mr.b4rt said:
yes changed it but every notification/ringsounds were distorted
Click to expand...
Click to collapse
See if with the new update works better, let me know!

bootloop with v3.5 :/

mr.b4rt said:
bootloop with v3.5 :/
Click to expand...
Click to collapse
Which rom are you in?
Latest version has some issues with MIUI 11 based on pie, actually

derpfest 27.10.2019

mr.b4rt said:
derpfest 27.10.2019
Click to expand...
Click to collapse
Gotcha man, in latest version is fixed, enjoy <3

Hi, a dolby-free version for those who already use Android Q (with xiaomi.eu weekly) ?

ripelag said:
Hi, a dolby-free version for those who already use Android Q (with xiaomi.eu weekly) ?
Click to expand...
Click to collapse
Will be available in the next few days

still distorted notification sounds :/

Pushed a new version today!
You'll find all info + changelog in first post! Enjoy!

sorry but the same distortion as before

Thanks for all your effort, but it would be great if a non-Dolby version could be available for Xiaomi.eu Miui 11 based on Q