Hello!
My audio mod has been totally revamped for being used with Q and Pie. Now it supports BOTH!
So yeah, let me explain what this mod does to your device:
FEATURES
- Based off @guitardedhero's Dolby Atmos for Pie+;
- Fixed some strange behavior that app could cause SystemUI FC's;
- Added some personal effects under the tab Music and Gaming;
- Added new mixer configs that fixes the audio cracking noise while using headphones via cable (ALL THANKS FOR THIS GOES AGAIN TO @pengus77. HE FIXES THE BEHAVIOR IN THE KERNEL);
- Toggleable Dolby Atmos button!
- TESTED ONLY ON CUSTOM PIE AND Q (NO MIUI) (if you want you can test it out and let me know if it works)
- Added Dual Speaker on both Pie and Q (will enable only if the device can handle it, for deleting every possibility of damaging the earpiece)
- NEW: ADDED Viper4FX 2.5.0.5 - Specific
KNOWN ISSUES:
None that I'm aware of. Let me know
Changelog: V1 (17/01/20):
- as per features;
- Initial public release;
Changelog: V2 (01/02/2019):
- Implemented Qualcomm audio codec for audio streaming and video recording / decoding (Quad DAC)
- Corrected the audio output (sound was too high)
- Corrected and fixed some strange behaviors of the app while using player apps (Poweramp users knows )
- Removed mixer_paths from the initial zip (was creating issues)
- Cleaned up source code, Magisk module
- Enabled and corrected all the voice of the menus, also made some modifications based on the ZTE Atom device (adapted to Grus)
Changelog: V3
- Updated libraries from latest update;
- Updated Quad DAC from scratch;
- Rewrote the dolby_audio_effects file;
- Adjusted medium and high freqs for all the presets;
Changelog: V3.5
- UPDATE: ADDED VIPER4FX - SPECIFIC for MI9SE (separate zip)
- UPDATE QUAD DAC - DOLBY APP TO LATEST VERSION;
- Wrote everything over ACDB for better flexibility and installation facility
- Pumped up volume over Speaker;
IMPORTANT:
IF Upgrading from the same rom to the updated one, just make sure to uninstall the mod BEFORE doing so. You'll bypass a badly bootloop caused by dolby service. I'll fix in the next version if I can
ALSO: ORDER OF INSTALLATION FOR LATEST VERSION DOESN'T MATTER! Just install ACDB first, then choose either dolby, viper or BOTH! Also, you can use those mods by themselves, but I recommend install ACDB on top of the other audio mod. Enjoy
Download Link of V1
Download link of V2
Download link of V3
Download folder for V3.5 + Viper4FX 2.5.0.5 + ACDB
Tested on the last xiaomi.eu dev (Q), is installed and then uninstalled. I’m waiting for the xiaomi.eu dev version. (Q). Thanks
Testing on xiaomi.eu stable V11.0.3.0.PFBCNXM_v11-9
Sound goooooooood
ripelag said:
Tested on the last xiaomi.eu dev (Q), is installed and then uninstalled. I’m waiting for the xiaomi.eu dev version. (Q). Thanks
Click to expand...
Click to collapse
Okay, Making a Q version right now! Gonna publish here when it's ready
cioce said:
Testing on xiaomi.eu stable V11.0.3.0.PFBCNXM_v11-9
Sound goooooooood
Click to expand...
Click to collapse
Glad to hear that it's working well for you! :good:
tested on the latest derpfest rom and magisk 20.1
music sounds good but the notification sounds are distorted :/
thx
regards
mr.b4rt said:
tested on the latest derpfest rom and magisk 20.1
music sounds good but the notification sounds are distorted :/
thx
regards
Click to expand...
Click to collapse
Have you tried to change the notifications? I tried it too and I didn't had any problem at all
Zero_One said:
Have you tried to change the notifications? I tried it too and I didn't had any problem at all
Click to expand...
Click to collapse
yes changed it but every notification/ringsounds were distorted
Just to inform you guys, I made a special version for all of you who are using Q roms (Like Weekly Xiaomi.EU etc.)
Link is avaiable in the first post. It doesn't contain Dolby Atmos but will use ICESound (HUGE Shoutout to @icewizard for his mod) instead, with my own very personal optimizations. Enjoy!
mr.b4rt said:
yes changed it but every notification/ringsounds were distorted
Click to expand...
Click to collapse
See if with the new update works better, let me know!
bootloop with v3.5 :/
mr.b4rt said:
bootloop with v3.5 :/
Click to expand...
Click to collapse
Which rom are you in?
Latest version has some issues with MIUI 11 based on pie, actually
derpfest 27.10.2019
mr.b4rt said:
derpfest 27.10.2019
Click to expand...
Click to collapse
Gotcha man, in latest version is fixed, enjoy <3
Hi, a dolby-free version for those who already use Android Q (with xiaomi.eu weekly) ?
ripelag said:
Hi, a dolby-free version for those who already use Android Q (with xiaomi.eu weekly) ?
Click to expand...
Click to collapse
Will be available in the next few days
still distorted notification sounds :/
Pushed a new version today!
You'll find all info + changelog in first post! Enjoy!
sorry but the same distortion as before
Thanks for all your effort, but it would be great if a non-Dolby version could be available for Xiaomi.eu Miui 11 based on Q
Related
After some work here is my first rom for Mate.
I AM NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE. DO IT AT YOUR OWN RISK.EVERYTHING WRITTEN IN THIS DOCUMENT WAS TESTED ON MY PHONE.
Stable and suitable for daily use .
Development Finished.
Working:
Audio
Wifi
Display
Led
GPS
Network
Wifi HotSpot
Bluetooth
Youtube HD.
USB
Multiuser
Pie-control
Compiled kernel using surdu_petru's P6 cyanogenmod kernel source.
Camera
Camera Recording (SD, HD720p, HD1080p)
DLNA
DolbyDigital Plus
Facelock
Non-Working :
- FM Radio
- USB Mass_Storage mode (MTP mode is usable without issues)
Known-bugs:
Camera HDR function is not working.
changelog 2014.05.11:
- Added OTA update possibilities.
- Fixed display physical size in kernel.
- Fixed Mediascanner crash
- Fixed MTPserver crash
- Fixed dpi reported by gralloc
changelog 2014.05.04:
- Fixed delay in Youtube HD play/pause.
- Added DLNA
- Added Facelock
- Added Dolby Digital Plus
changelog 2014.05.02:
- Fixed Camera
- Added CPU Governors to kernel (lazy, hotplug,wheatley)
- Kernel modifications (IO Scheduler, memory,minor config changes)
changelog 2014.04.20:
- Fixed PPTP VPN
- Fixed airplane mode switching. Now correctly registers to network after airplane mode.
- Fixed signalstrength , now it is correctly shown both in statusbar and in about phone.
changelog 2014.03.16:
- using compiled vold instead of prebuilt.
- Fixed internal sd handling. Now the main user files accessible only by the owner , second and third users files are separated correctly .
- Fixed USB OTG function. It supports pendrive with ntfs , exFat filesystems too because of the new compiled vold.
- Fixed liboverlay logcat errors.
- Increased headset volume (Thanks to acbka)
changelog 2014.03.10:
- changed to compile kernel from source at build time instead of using prebuilt kernel.
- fixed notification led color (our device does not support blue)
Download:
cm-10.1-20140511-UNOFFICIAL-hwmt1_u06.zip
Install it from permanent twrp recovery , and do not forget to do a wipe .
Use this Google Apps package : Google Apps
Sources : https://github.com/joestone/Huawei-MATE-CM10.1
Thanks to surdu_petru , CyanogenMod Team.
great work ,downloaded
works with the camera app Camera 360?
Thanks joe.stone somethig news
Inviato dal mio MT1-U06 utilizzando Tapatalk
Thanks for your hard work mate, it looks great, but I have a question for you (or anyone who used this ROM): is the audio volume higher with headphones than the stock rom? Because in stock it's very very low in maximum volume.
Shadowprince94 said:
Thanks for your hard work mate, it looks great, but I have a question for you (or anyone who used this ROM): is the audio volume higher with headphones than the stock rom? Because in stock it's very very low in maximum volume.
Click to expand...
Click to collapse
Here is a little TUT to solve your problem.
Click
greez Gadlion
Gadlion^1 said:
Here is a little TUT to solve your problem.
Click
greez Gadlion
Click to expand...
Click to collapse
Yes, but these are not really good solutions, sound is far more better and louder in custom roms.
EDIT: I made some changes in the method, and it works well.
this rom works app 360 camera and flash it???
Thanks.
ErSergi said:
this rom works app 360 camera and flash it???
Thanks.
Click to expand...
Click to collapse
Try it make a backup from your android, and try, you have nothing to lose.
Shadowprince94 said:
Try it make a backup from your android, and try, you have nothing to lose.
Click to expand...
Click to collapse
but if anyone has installed this rom you could try and get more!
Shadowprince94 said:
Thanks for your hard work mate, it looks great, but I have a question for you (or anyone who used this ROM): is the audio volume higher with headphones than the stock rom? Because in stock it's very very low in maximum volume.
Click to expand...
Click to collapse
hi , try my way http://4pda.ru/forum/index.php?s=&showtopic=475994&view=findpost&p=27064535 Russian forum
Tnx for your hard work dude keep on and god bless you
I have faith in you. Keep up the good work.
is it possible to make custom kernel compatible with cm10 so that we can try the p6 roms. It seems only touch driver is different for HAM kernel so is it possible to add touch driver to existing p6 kernels?
svvv said:
is it possible to make custom kernel compatible with cm10 so that we can try the p6 roms. It seems only touch driver is different for HAM kernel so is it possible to add touch driver to existing p6 kernels?
Click to expand...
Click to collapse
The touch driver is different , there is some differencies in camera . The audio is slightly different .
Once I will be able to compile a working touch driver loadable with insmod we will have kitkat.
joe.stone said:
The touch driver is different , there is some differencies in camera . The audio is slightly different .
Once I will be able to compile a working touch driver loadable with insmod we will have kitkat.
Click to expand...
Click to collapse
Not the KitKat one i was referring to 4.2.2 version. I installed p6 green kernel which is a CM compatible kernel in that touch is not working. is it possible to make a similar one for our HAM
svvv said:
Not the KitKat one i was referring to 4.2.2 version. I installed p6 green kernel which is a CM compatible kernel in that touch is not working. is it possible to make a similar one for our HAM
Click to expand...
Click to collapse
It is done , now based on P6 Cyanogenmod (green) kernel.
First post updated.
joe.stone said:
It is done , now based on P6 Cyanogenmod (green) kernel.
First post updated.
Click to expand...
Click to collapse
Thank you so much for your hard work joe.stone.....
google store not working
the google store isnt letting me install or update any of my apps. help please
noobK1user said:
the google store isnt letting me install or update any of my apps. help please
Click to expand...
Click to collapse
Did you install the correct Google Apps package (see first post) ?
Did you wipe / factory reset before ROM install ?
This is the Dolby Atmos sound effect ported from a Lenovo rom. This should work on all devices (starting from Android 4.3) since it is a software effect. It might conflict with other dolby effects you already installed. Flash the zip, it will edit (not overwrite) your audio_effects.conf.
Download file R6.5 below and flash it with any custom recovery. If it worked, hip hip hurray. If don't, flash R.6.5.1 uninstall script (given below too) file also via custom recovery and it will remove this software completely.
Download: R6.5
Download: R6.5.1 uninstall
deep_buffer remover: Download
(It removes the deep_buffer { ... } section from your /system/etc/audio_policy.conf necessary on some devices in order to make the effects works properly)
Note - I do not created or modified anything. It's the work of developers whose credits goes to them.
Version Information
Status: Stable
Current Stable Version: R6.5
Stable Release Date: 2015-06-20
Created 2015-05-15
Last Updated 2015-08-11
What is deep buffer remover?
nhmanas said:
What is deep buffer remover?
Click to expand...
Click to collapse
It removes the deep_buffer { ... } section from your /system/etc/audio_policy.conf necessary on some devices in order to make the effects works properly.
Does it have any effects on audio input from the Mic?
Bolumstar said:
Does it have any effects on audio input from the Mic?
Click to expand...
Click to collapse
I guess no. It's for audio that you listen.
Not working on marshmallow.. unfortunately Dolby atmos stopped...
I have a question like that:
Now I am at Mokee Release on G3 Cat6 (F460). Built-in apk including Viper and I do flash Dolby Atmos for my Poweramp.
The problem is when I give permission to Dolby and it's not work with Poweramp but the built-in music player.
Could I full remove Viper 'cause it conflict with Dolby ? F1 me to solve that.
P/S : Previously it worked with Poweramp on my device at cook XS ROM as I proceed the same way.
Thanks
Tapatalk | F-460S
It is for nougat rom support? thank you
I want to install dolby atmos in my vivo 51yL. kindly help
does this work on x86 device??? if not do you know where I can get an x86 version of this, I really wanna try this in my zenfone....
vaynefox said:
does this work on x86 device??? if not do you know where I can get an x86 version of this, I really wanna try this in my zenfone....
Click to expand...
Click to collapse
I want to know too. Thanks for bringing this question up. I would like to ask the same.
rajputmiles said:
This is the Dolby Atmos sound effect ported from a Lenovo rom. This should work on all devices (starting from Android 4.3) since it is a software effect. It might conflict with other dolby effects you already installed. Flash the zip, it will edit (not overwrite) your audio_effects.conf.
Download file R6.5 below and flash it with any custom recovery. If it worked, hip hip hurray. If don't, flash R.6.5.1 uninstall script (given below too) file also via custom recovery and it will remove this software completely.
Download: R6.5
Download: R6.5.1 uninstall
deep_buffer remover: Download
(It removes the deep_buffer { ... } section from your /system/etc/audio_policy.conf necessary on some devices in order to make the effects works properly)
Note - I do not created or modified anything. It's the work of developers whose credits goes to them.
Version Information
Status: Stable
Current Stable Version: R6.5
Stable Release Date: 2015-06-20
Created 2015-05-15
Last Updated 2015-08-11
Click to expand...
Click to collapse
It's only free for 30 Days. behind it, 20$ a Month.
Sent Form my Lovely LG-H960a ATR Android 7 ROM + Tapatalk
It works well on intex 5.0 lollipop ☺
i have realme x mobile, in this mobile dolby atmos not like lenovo mobile
i get that dolby atmos features like lenovo ,in realme x ,how i install
可以重新上传文件吗？下载文件失败。显示“404”
Just info for everyone that use AOSP NOUGAT or CM14.1 on xperia m, i've found sound mod that working perfectly on this device, i've tested used for a few days, and there is no bug (in my case) but i think i it won't
I used Deuteronomy™ 2.3.3 with Add-on (Dolby Atmos)
Original post and installation, you can see this:
http://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709
And this is the link for download soundmod and add-on (Dolby Atmos):
https://www.androidfilehost.com/?w=files&flid=106116
A.R.I.S.E, is one of the great tech in audio enhancement industry
and I tried
2.4 alpha 8-8
with atmos
works better then meli
Godlydevils said:
A.R.I.S.E, is one of the great tech in audio enhancement industry
and I tried
2.4 alpha 8-8
with atmos
works better then meli
Click to expand...
Click to collapse
Of course, i've installed on cm13 till cm14.1...
Masik P
Changelog:
- Improved global Hi-Fi audio engine from Harman Kardon
- Hybrid base, a combination of several ports (Mi 5S Plus, Mi 8 SE)
- Added Choice of the statusbar style (applied after reboot)
- Added the ability to change the pixel density per inch (DPI) in the screen settings.
- Added full-screen gesture control
- Updated Masik Material design layers
- Updated call window design
- Updated unwanted page block list
- Updated APN / SPN parameters
- Updated camera application settings and add-ons
- Added cam2api support
- Added AAC and AptX HD codecs
- Added A-GPS settings
- Improved sound quality during video recording
- Optimized system for better performance
- Updated system applications
- Changed system animations duration
- Fixed minor bugs in previous versions of bug reports
Download: Gdrive
The kernel included is based on Floppy.
If you experience any overheating, download the Floppy manager and tweak it to your needs
(or apply my settings from first post here)
Sound boost + light underclock + i/o scheduler tweaks
dev>null said:
Masik X 1.0
Based on china firmware 8.8.30 / debloated / minimal gapps included
Aroma installer / tons of customizations
System optimizations
Built-in Hi-Fi Audio
Modified interface
AptX HD codecs
much more...
https://yadi.sk/d/9kPbMePkR8H0Cw
Click to expand...
Click to collapse
Thanks for new Rom.
Support ota Update?
Dirty flash over MIUI MS 8.9.4 will work?
jony4fun said:
Dirty flash over MIUI MS 8.9.4 will work?
Click to expand...
Click to collapse
Yes, just revert to the default theme / then clear cache, dalvik and system.
dev>null said:
Yes, just revert to the default theme / then clear cache, dalvik and system.
Click to expand...
Click to collapse
Differences??
Hi, does this one have all languages?
Thanks Dev.
Sent from my MI 5 using Tapatalk
Does this have Volte enabled?
Quite an amount of lag after install. How to manage it?
Partha
Whats the different between this and MS?
partha_rc said:
Quite an amount of lag after install. How to manage it?
Partha
Click to expand...
Click to collapse
In my case, restart solved the problem
Hi all, I created an yandex account but it does not allow me to log in, it tells me Download limit reached. You can still save this file to your Yandex.Disk
Volte gone after 1st boot.
Pls fix it....Otherwise the rom is very good with extra features.
Sent from my [device_name] using XDA-Developers Legacy app
battery drain overnight quite obvious. & battery consumption quite a lot compare to miui ms 8.9.4..
battery consumes much compare to miui ms 8.9.4..
---------- Post added at 05:41 PM ---------- Previous post was at 05:39 PM ----------
partha_rc said:
Quite an amount of lag after install. How to manage it?
Partha
Click to expand...
Click to collapse
clear cache, dalvik and system and then install. first boot may take time and lag. reboot when it's become stable.
no lag after a reboot till now.
smart_thingup said:
Whats the different between this and MS?
Click to expand...
Click to collapse
?
Aioria said:
Hi all, I created an yandex account but it does not allow me to log in, it tells me Download limit reached. You can still save this file to your Yandex.Disk
Click to expand...
Click to collapse
Up
This rom is similar to MIUI MS, with different customizations. Battery is not so optimized yet.
About Yandex: create an account, login, save the file to your account, then download it.
How can I install it? My bootloader is already unlocked, advice on where to get the twrp and the root?
Or can I follow this guide:
https://xiaomi.eu/community/threads/8-6-14-16-18-20.44522/
Thanks
Aioria said:
How can I install it? My bootloader is already unlocked, advice on where to get the twrp and the root?
Or can I follow this guide:
https://xiaomi.eu/community/threads/8-6-14-16-18-20.44522/
Thanks
Click to expand...
Click to collapse
yeah that's the way to go!
dev>null said:
Masik X 1.0
Based on china firmware 8.8.30 / debloated / minimal gapps included
Aroma installer / tons of customizations
System optimizations
Built-in Hi-Fi Audio
Modified interface
AptX HD codecs
much more...
https://yadi.sk/d/9kPbMePkR8H0Cw
Click to expand...
Click to collapse
hi,
there is a language support pt-br?
how frequent will this be updated?
on what day it will be updated?
will this be update?
seems dev. too busy.
Zero Audio Patch
Better audio experience
Device ZUK Z2 Plus | ZUK Z2 Pro
Android 7.x-11.x
Kernel 3.18-4.x
Magisk Latest
Android | DAC audio quality optimization
Upgraded volume scale
Configs optimization
Smart module installer - once to install, twice to uninstall, overwrites other versions
Mic quality optimization
EQ effects cleaner (optional)
Additional options you can find inside zip -> user_config.txt
Type - su | - audio_log in terminal to report about issue
Release
Changelog
1.5d - 24.09.2020
1.5c - 16.06.2020
1.5b - 06.06.2020
1.5a - 01.06.2020
1.46 - 08.03.2019
1.45 - 04.03.2019
1.44 - 18.01.2019
1.43 - 12.01.2019
1.42 - 05.01.2019
1.41 - 01.01.2019
1.4 - 25.12.2018
1.31 - 18.12.2018
1.3 - 13.12.2018
1.22 - 21.10.2018
1.21 - 10.10.2018
1.2 - 04.10.2018
1.14 - 29.09.2018
1.13 - 28.09.2018
1.12 - 27.09.2018
1.11 - 22.09.2018
1.1 - 21.09.2018
1.01 - 20.09.2018
1.0 - 18.09.2018
Does this mod enables 24bit audio for zuk z2? can you please explain what does this mod do?
arun356y said:
Does this mod enables 24bit audio for zuk z2? can you please explain what does this mod do?
Click to expand...
Click to collapse
Updated description
so after flash how to check if the sound quality has improved? can we use any player or we have to only use poweramp or neutron player?
arun356y said:
so after flash how to check if the sound quality has improved? can we use any player or we have to only use poweramp or neutron player?
Click to expand...
Click to collapse
Only to hear it. Other players is resampling source to 48/16
unfortunately this mod gave me bootloop and I have to setup everything again on my device, I was on Oxygen Os v4.5.1 and flased it through magisk v17.1.
Which ROMs are supported?
arun356y said:
unfortunately this mod gave me bootloop and I have to setup everything again on my device, I was on Oxygen Os v4.5.1 and flased it through magisk v17.1.
Which ROMs are supported?
Click to expand...
Click to collapse
Hmm that strange... Pretty well works in AOSP based ROMs (AEX, AOSIP, Pixel Experience, Arrow OS)
Go in PM, Let's see what we can do.
Works fine on aosip, couldn't tell that much difference because I am having good headset, I am sure there is difference in audio
Couldn't find way to increase volume through mixer path, can u tell me where to change value.....
ashwinonm said:
Couldn't find way to increase volume through mixer path, can u tell me where to change value.....
Click to expand...
Click to collapse
Find
Code:
<path name="headphones">
and then change
Code:
<ctl name="RX1 Mix Digital Volume" value="94" />
<ctl name="RX2 Mix Digital Volume" value="94" />
But, if you have kernel with sound control. You need change volume from
/sys/kernel/sound_control/
@vlad113 could you make stereo speaker magisk mod? The one on XDA not working properly.
senthamizhan said:
@vlad113 could you make stereo speaker magisk mod? The one on XDA not working properly.
Click to expand...
Click to collapse
added
i tried the mod its good but i couldnt edit the mixer paths to increase incall volume couldnt find the line to edit ??
There is no sound when I switch the mic on pubg
Will I need to remove v4a to use? also will the 24 bit audio work with Spotify?
ahh988 said:
i tried the mod its good but i couldnt edit the mixer paths to increase incall volume couldnt find the line to edit
Click to expand...
Click to collapse
added volume parameter for earpiece
qazed102 said:
There is no sound when I switch the mic on pubg
Click to expand...
Click to collapse
fixed
AgentNemo said:
Will I need to remove v4a to use? also will the 24 bit audio work with Spotify?
Click to expand...
Click to collapse
no need for that. No, you get 48/16
Tried playing back to back with mod on and off (phone reboot needed) multiple times. I do feel this mod is giving better output than stock. Also tried with Dolby Atmos on and off, off is definitely better seems to depend on impedance (I had tested with MI in-ear basics which sounded bad with Atmos, later used 1more triples which seem much better with Atmos). Please see if this mod can be applied without restarting, comparison will be very accurate then, just to make sure it's not a placebo. I'm sure its not, but still..
Great work though, thanks for your efforts!
Does it work on Android 7 ROMs?
DShpak said:
Does it work on Android 7 ROMs?
Click to expand...
Click to collapse
should work