Develop Bugs

Dolby Atmos (All Devices)

This is the Dolby Atmos sound effect ported from a Lenovo rom. This should work on all devices (starting from Android 4.3) since it is a software effect. It might conflict with other dolby effects you already installed. Flash the zip, it will edit (not overwrite) your audio_effects.conf.
Download file R6.5 below and flash it with any custom recovery. If it worked, hip hip hurray. If don't, flash R.6.5.1 uninstall script (given below too) file also via custom recovery and it will remove this software completely.
Download: R6.5
Download: R6.5.1 uninstall
deep_buffer remover: Download
(It removes the deep_buffer { ... } section from your /system/etc/audio_policy.conf necessary on some devices in order to make the effects works properly)
Note - I do not created or modified anything. It's the work of developers whose credits goes to them.
Version Information
Status: Stable
Current Stable Version: R6.5
Stable Release Date: 2015-06-20
Created 2015-05-15
Last Updated 2015-08-11

What is deep buffer remover?

nhmanas said:
What is deep buffer remover?
Click to expand...
Click to collapse
It removes the deep_buffer { ... } section from your /system/etc/audio_policy.conf necessary on some devices in order to make the effects works properly.

Does it have any effects on audio input from the Mic?

Bolumstar said:
Does it have any effects on audio input from the Mic?
Click to expand...
Click to collapse
I guess no. It's for audio that you listen.

Not working on marshmallow.. unfortunately Dolby atmos stopped...

I have a question like that:
Now I am at Mokee Release on G3 Cat6 (F460). Built-in apk including Viper and I do flash Dolby Atmos for my Poweramp.
The problem is when I give permission to Dolby and it's not work with Poweramp but the built-in music player.
Could I full remove Viper 'cause it conflict with Dolby ? F1 me to solve that.
P/S : Previously it worked with Poweramp on my device at cook XS ROM as I proceed the same way.
Thanks
Tapatalk | F-460S

It is for nougat rom support? thank you

I want to install dolby atmos in my vivo 51yL. kindly help

does this work on x86 device??? if not do you know where I can get an x86 version of this, I really wanna try this in my zenfone....

vaynefox said:
does this work on x86 device??? if not do you know where I can get an x86 version of this, I really wanna try this in my zenfone....
Click to expand...
Click to collapse
I want to know too. Thanks for bringing this question up. I would like to ask the same.

rajputmiles said:
This is the Dolby Atmos sound effect ported from a Lenovo rom. This should work on all devices (starting from Android 4.3) since it is a software effect. It might conflict with other dolby effects you already installed. Flash the zip, it will edit (not overwrite) your audio_effects.conf.
Download file R6.5 below and flash it with any custom recovery. If it worked, hip hip hurray. If don't, flash R.6.5.1 uninstall script (given below too) file also via custom recovery and it will remove this software completely.
Download: R6.5
Download: R6.5.1 uninstall
deep_buffer remover: Download
(It removes the deep_buffer { ... } section from your /system/etc/audio_policy.conf necessary on some devices in order to make the effects works properly)
Note - I do not created or modified anything. It's the work of developers whose credits goes to them.
Version Information
Status: Stable
Current Stable Version: R6.5
Stable Release Date: 2015-06-20
Created 2015-05-15
Last Updated 2015-08-11
Click to expand...
Click to collapse
It's only free for 30 Days. behind it, 20$ a Month.
Sent Form my Lovely LG-H960a ATR Android 7 ROM + Tapatalk

It works well on intex 5.0 lollipop ☺

i have realme x mobile, in this mobile dolby atmos not like lenovo mobile
i get that dolby atmos features like lenovo ,in realme x ,how i install

可以重新上传文件吗？下载文件失败。显示“404”

[MOD][8.0.0] Aldeon Surround Sound Mod Oreo Edition

It's me again with the Oreo Edition of Aldeon Surround Sound Mod
Download the attachment, go to /system/etc and rename the existing mixer_paths_0.xml to mixer_paths_0.xml.bak then copy the new mixer_paths_0.xml and change the permissions to rw-r--r-- or 0644.
It won't damage your earpiece so keep calm
Features:
- louder than stock
- left and right channels
- better for utilisation in landscape
- now clicks will work in "surround mode"
To download on mobile just use Chrome, long press on attachment and click "Download link".
To adjust the volumes:
- open /system/etc/mixer_paths_0.xml
- search for "Output volume stage" then look at the "gain-media-speaker" path
- decrease or increase by 2 or more (not recommended) the "46" and "36" values (2 values for HPOUT3 and 2 for AIF4TX) to the values you want
Don't ask me "Does this mod work on XYZ ROM?". The answer is "I don't know, test and report!".
It should be compatible with all models.
Compatible with all 8.0.0 ROMs.
Possibly compatible with S7
If you want to use this in your ROM, give me the proper credits and you are done.
Credits to @AlexisXDA for his original work on the 7.0 Surround Sound. After converting his changes to a "patch" I was able to apply that "patch" to our mixer_paths_0.xml. It needed a lot of testing.

Nice work. Will be useful in the near future

rifek4 said:
Nice work. Will be useful in the near future
Click to expand...
Click to collapse
minealex2244 said:
It's me again with the Oreo Edition of Aldeon Surround Sound Mod
Download the attachment, go to /system/etc and rename the existing mixer_paths_0.xml to mixer_paths_0.xml.bak then copy the new mixer_paths_0.xml and change the permissions to rw-r--r-- or 0644.
It won't damage your earpiece so keep calm
Features:
- louder than stock
- left and right channels
- better for utilisation in landscape
- now clicks will work in "surround mode"
To download on mobile just use Chrome, long press on attachment and click "Download link".
To adjust the volumes:
- open /system/etc/mixer_paths_0.xml
- search for "Output volume stage" then look at the "gain-media-speaker" path
- decrease or increase by 2 or more (not recommended) the "46" and "36" values (2 values for HPOUT3 and 2 for AIF4TX) to the values you want
Don't ask me "Does this mod work on XYZ ROM?". The answer is "I don't know, test and report!".
It should be compatible with all models.
Compatible with all 8.0.0 ROMs.
Possibly compatible with S7
If you want to use this in your ROM, give me the proper credits and you are done.
Credits to @AlexisXDA for his original work on the 7.0 Surround Sound. After converting his changes to a "patch" I was able to apply that "patch" to our mixer_paths_0.xml. It needed a lot of testing.
Click to expand...
Click to collapse
it worked correctly, but when it increases to the maximum, the music just pauses, and the volume goes down, what can it be?

LuizHBr said:
it worked correctly, but when it increases to the maximum, the music just pauses, and the volume goes down, what can it be?
Click to expand...
Click to collapse
I didn't have that issue but it could happen because of a "safety decrease" of volume so it won't damage your speakers.

Thanks you ???

On 8.1 no file found. Why

zeuszos said:
On 8.1 no file found. Why
Click to expand...
Click to collapse
There is.

minealex2244 said:
There is.
Click to expand...
Click to collapse
No

zeuszos said:
No
Click to expand...
Click to collapse
Then I have no idea.

Works on Lineage os 15! Thank you! Sound from earpiace at Max volume is a bit dissorted but not much

will try near future

zeuszos said:
No
Click to expand...
Click to collapse
Try in /system/vendor/etc
That's where it was for me (RR 8.1).
It works, but I don't know, sounds wrong in a weird way.
Thanks for your work anyway!

Zero Audio Patch 1.5d

Zero Audio Patch
Better audio experience
​
Device ZUK Z2 Plus | ZUK Z2 Pro
Android 7.x-11.x
Kernel 3.18-4.x
Magisk Latest
Android | DAC audio quality optimization
Upgraded volume scale
Configs optimization
Smart module installer - once to install, twice to uninstall, overwrites other versions
Mic quality optimization
EQ effects cleaner (optional)
Additional options you can find inside zip -> user_config.txt
Type - su | - audio_log in terminal to report about issue
Release​

Changelog​
1.5d - 24.09.2020
1.5c - 16.06.2020
1.5b - 06.06.2020
1.5a - 01.06.2020
1.46 - 08.03.2019
1.45 - 04.03.2019
1.44 - 18.01.2019
1.43 - 12.01.2019
1.42 - 05.01.2019
1.41 - 01.01.2019
1.4 - 25.12.2018
1.31 - 18.12.2018
1.3 - 13.12.2018
1.22 - 21.10.2018
1.21 - 10.10.2018
1.2 - 04.10.2018
1.14 - 29.09.2018
1.13 - 28.09.2018
1.12 - 27.09.2018
1.11 - 22.09.2018
1.1 - 21.09.2018
1.01 - 20.09.2018
1.0 - 18.09.2018

Does this mod enables 24bit audio for zuk z2? can you please explain what does this mod do?

arun356y said:
Does this mod enables 24bit audio for zuk z2? can you please explain what does this mod do?
Click to expand...
Click to collapse
Updated description

so after flash how to check if the sound quality has improved? can we use any player or we have to only use poweramp or neutron player?

arun356y said:
so after flash how to check if the sound quality has improved? can we use any player or we have to only use poweramp or neutron player?
Click to expand...
Click to collapse
Only to hear it. Other players is resampling source to 48/16

unfortunately this mod gave me bootloop and I have to setup everything again on my device, I was on Oxygen Os v4.5.1 and flased it through magisk v17.1.
Which ROMs are supported?

arun356y said:
unfortunately this mod gave me bootloop and I have to setup everything again on my device, I was on Oxygen Os v4.5.1 and flased it through magisk v17.1.
Which ROMs are supported?
Click to expand...
Click to collapse
Hmm that strange... Pretty well works in AOSP based ROMs (AEX, AOSIP, Pixel Experience, Arrow OS)
Go in PM, Let's see what we can do.

Works fine on aosip, couldn't tell that much difference because I am having good headset, I am sure there is difference in audio

Couldn't find way to increase volume through mixer path, can u tell me where to change value.....

ashwinonm said:
Couldn't find way to increase volume through mixer path, can u tell me where to change value.....
Click to expand...
Click to collapse
Find
Code:
<path name="headphones">
and then change
Code:
<ctl name="RX1 Mix Digital Volume" value="94" />
<ctl name="RX2 Mix Digital Volume" value="94" />
But, if you have kernel with sound control. You need change volume from
/sys/kernel/sound_control/

@vlad113 could you make stereo speaker magisk mod? The one on XDA not working properly.

senthamizhan said:
@vlad113 could you make stereo speaker magisk mod? The one on XDA not working properly.
Click to expand...
Click to collapse
added

i tried the mod its good but i couldnt edit the mixer paths to increase incall volume couldnt find the line to edit ??

There is no sound when I switch the mic on pubg

Will I need to remove v4a to use? also will the 24 bit audio work with Spotify?

ahh988 said:
i tried the mod its good but i couldnt edit the mixer paths to increase incall volume couldnt find the line to edit
Click to expand...
Click to collapse
added volume parameter for earpiece
qazed102 said:
There is no sound when I switch the mic on pubg
Click to expand...
Click to collapse
fixed
AgentNemo said:
Will I need to remove v4a to use? also will the 24 bit audio work with Spotify?
Click to expand...
Click to collapse
no need for that. No, you get 48/16

Tried playing back to back with mod on and off (phone reboot needed) multiple times. I do feel this mod is giving better output than stock. Also tried with Dolby Atmos on and off, off is definitely better seems to depend on impedance (I had tested with MI in-ear basics which sounded bad with Atmos, later used 1more triples which seem much better with Atmos). Please see if this mod can be applied without restarting, comparison will be very accurate then, just to make sure it's not a placebo. I'm sure its not, but still..
Great work though, thanks for your efforts!

Does it work on Android 7 ROMs?

DShpak said:
Does it work on Android 7 ROMs?
Click to expand...
Click to collapse
should work

[MOD] Surround Sound + Extra Volume. For I9500 / AOSP 7.1 ROMS

Hello
I wanted to have surround mod in my old I9500 and i didnt find anything so i decided to made my own.
I am sharing here because other people may want to have this too, i dont know, but here it is.
This mod will enable the earpiece for media sound, for example games, music, video, etc.
So the sound will be enabled both in earpiece and speaker.
Does not affect calling or headset sound.
Also i have modified the volume levels, now the maximun is higher tan ever.
THIS IS ONLY FOR:
- SAMSUNG I9500
- ROOTED PHONE
- AOSP ROM 7.1 (NOUGAT)
I am not responsible for any damage if you try on other roms or other model of S4. Maybe is working in I9505 too but i dont know because i dont have it.
I only tested in my I9500 with XenonHD Nougat. I Dont test in RR but i think is the same.
INSTALL:
1 - Download attached file: mixer_paths_0.xml
2 - Use Root Browser and go to: system/etc
3 - Find the file mixer_paths_0.xml and rename (in case of you need a backup of the original file)
4 - Place the new file with the mod, downloaded from here
5 - Reboot the phone, test and enjoy
I hope this will help, test it and comment
Credits: Nylonnohay
Release date: 19-10-2018
Last updated: 19-10-2018

Very good louder sound amazing
Sent from my SM-N920C using Tapatalk

Nylonnohay said:
Hello
I wanted to have surround mod in my old I9500 and i didnt find anything so i decided to made my own.
I am sharing here because other people may want to have this too, i dont know, but here it is.
This mod will enable the earpiece for media sound, for example games, music, video, etc.
So the sound will be enabled both in earpiece and speaker.
Does not affect calling or headset sound.
Also i have modified the volume levels, now the maximun is higher tan ever.
THIS IS ONLY FOR:
- SAMSUNG I9500
- ROOTED PHONE
- AOSP ROM 7.1 (NOUGAT)
I am not responsible for any damage if you try on other roms or other model of S4. Maybe is working in I9505 too but i dont know because i dont have it.
I only tested in my I9500 with XenonHD Nougat. I Dont test in RR but i think is the same.
INSTALL:
1 - Download attached file: mixer_paths_0.xml
2 - Use Root Browser and go to: system/etc
3 - Find the file mixer_paths_0.xml and rename (in case of you need a backup of the original file)
4 - Place the new file with the mod, downloaded from here
5 - Reboot the phone, test and enjoy
I hope this will help, test it and comment
Credits: Nylonnohay
Release date: 19-10-2018
Last updated: 19-10-2018
Click to expand...
Click to collapse
i can install in port roms ? (note 5port)

Feardarks said:
i can install in port roms ? (note 5port)
Click to expand...
Click to collapse
No because is a different file. You may lost other features like audio in calls, etc.
Anyway, dual speaker mod for ports already exists.

Thank you,lineage os also worked.

I've created a flashable zip for ease of use, kudos to Nylonnohay

[MOD][Magisk][Pie and Q] Dolby Atmos + and Viper4FX for MI9SE

Hello!
My audio mod has been totally revamped for being used with Q and Pie. Now it supports BOTH!
So yeah, let me explain what this mod does to your device:
FEATURES
- Based off @guitardedhero's Dolby Atmos for Pie+;
- Fixed some strange behavior that app could cause SystemUI FC's;
- Added some personal effects under the tab Music and Gaming;
- Added new mixer configs that fixes the audio cracking noise while using headphones via cable (ALL THANKS FOR THIS GOES AGAIN TO @pengus77. HE FIXES THE BEHAVIOR IN THE KERNEL);
- Toggleable Dolby Atmos button!
- TESTED ONLY ON CUSTOM PIE AND Q (NO MIUI) (if you want you can test it out and let me know if it works)
- Added Dual Speaker on both Pie and Q (will enable only if the device can handle it, for deleting every possibility of damaging the earpiece)
- NEW: ADDED Viper4FX 2.5.0.5 - Specific
KNOWN ISSUES:
None that I'm aware of. Let me know
Changelog: V1 (17/01/20):
- as per features;
- Initial public release;
Changelog: V2 (01/02/2019):
- Implemented Qualcomm audio codec for audio streaming and video recording / decoding (Quad DAC)
- Corrected the audio output (sound was too high)
- Corrected and fixed some strange behaviors of the app while using player apps (Poweramp users knows )
- Removed mixer_paths from the initial zip (was creating issues)
- Cleaned up source code, Magisk module
- Enabled and corrected all the voice of the menus, also made some modifications based on the ZTE Atom device (adapted to Grus)
Changelog: V3
- Updated libraries from latest update;
- Updated Quad DAC from scratch;
- Rewrote the dolby_audio_effects file;
- Adjusted medium and high freqs for all the presets;
Changelog: V3.5
- UPDATE: ADDED VIPER4FX - SPECIFIC for MI9SE (separate zip)
- UPDATE QUAD DAC - DOLBY APP TO LATEST VERSION;
- Wrote everything over ACDB for better flexibility and installation facility
- Pumped up volume over Speaker;
IMPORTANT:
IF Upgrading from the same rom to the updated one, just make sure to uninstall the mod BEFORE doing so. You'll bypass a badly bootloop caused by dolby service. I'll fix in the next version if I can
ALSO: ORDER OF INSTALLATION FOR LATEST VERSION DOESN'T MATTER! Just install ACDB first, then choose either dolby, viper or BOTH! Also, you can use those mods by themselves, but I recommend install ACDB on top of the other audio mod. Enjoy
Download Link of V1
Download link of V2
Download link of V3
Download folder for V3.5 + Viper4FX 2.5.0.5 + ACDB

Tested on the last xiaomi.eu dev (Q), is installed and then uninstalled. I’m waiting for the xiaomi.eu dev version. (Q). Thanks

Testing on xiaomi.eu stable V11.0.3.0.PFBCNXM_v11-9
Sound goooooooood

ripelag said:
Tested on the last xiaomi.eu dev (Q), is installed and then uninstalled. I’m waiting for the xiaomi.eu dev version. (Q). Thanks
Click to expand...
Click to collapse
Okay, Making a Q version right now! Gonna publish here when it's ready

cioce said:
Testing on xiaomi.eu stable V11.0.3.0.PFBCNXM_v11-9
Sound goooooooood
Click to expand...
Click to collapse
Glad to hear that it's working well for you! :good:

tested on the latest derpfest rom and magisk 20.1
music sounds good but the notification sounds are distorted :/
thx
regards

mr.b4rt said:
tested on the latest derpfest rom and magisk 20.1
music sounds good but the notification sounds are distorted :/
thx
regards
Click to expand...
Click to collapse
Have you tried to change the notifications? I tried it too and I didn't had any problem at all

Zero_One said:
Have you tried to change the notifications? I tried it too and I didn't had any problem at all
Click to expand...
Click to collapse
yes changed it but every notification/ringsounds were distorted

Just to inform you guys, I made a special version for all of you who are using Q roms (Like Weekly Xiaomi.EU etc.)
Link is avaiable in the first post. It doesn't contain Dolby Atmos but will use ICESound (HUGE Shoutout to @icewizard for his mod) instead, with my own very personal optimizations. Enjoy!

mr.b4rt said:
yes changed it but every notification/ringsounds were distorted
Click to expand...
Click to collapse
See if with the new update works better, let me know!

bootloop with v3.5 :/

mr.b4rt said:
bootloop with v3.5 :/
Click to expand...
Click to collapse
Which rom are you in?
Latest version has some issues with MIUI 11 based on pie, actually

derpfest 27.10.2019

mr.b4rt said:
derpfest 27.10.2019
Click to expand...
Click to collapse
Gotcha man, in latest version is fixed, enjoy <3

Hi, a dolby-free version for those who already use Android Q (with xiaomi.eu weekly) ?

ripelag said:
Hi, a dolby-free version for those who already use Android Q (with xiaomi.eu weekly) ?
Click to expand...
Click to collapse
Will be available in the next few days

still distorted notification sounds :/

Pushed a new version today!
You'll find all info + changelog in first post! Enjoy!

sorry but the same distortion as before

Thanks for all your effort, but it would be great if a non-Dolby version could be available for Xiaomi.eu Miui 11 based on Q