Related
CWM RECOVERY FOR THE KARBONN A18!!
Hey guys!! Finally i ported the ClockWorkMod ICS recovery (non-touch) onto our device!!
For people who dont know what CWM recovery and its benefits are, read this -> http://www.addictivetips.com/mobile/what-is-clockworkmod-recovery-and-how-to-use-it-on-android-complete-guide/
So, here are the steps on getting the CWM on Karbonn A18-
What you need
1. Karbonn A18, data usb cable.
2. Download the CWM recovery image file from the attachment below this post.
3. Download SP Flash Tool from my another post -> http://forum.xda-developers.com/attachment.php?attachmentid=1353992&d=1348592592
4. Download MTK6575 Driver from -> http://forum.xda-developers.com/attachment.php?attachmentid=1353943&d=1348591411
5. Download the MTK6575 Scatter.txt file from the attachment below this post.
Installation Steps-
1. Unzip and Install the MTK6575 USB drivers on your Windows PC, just run setup.exe.
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2. Copy the CWM recovery file that you downloaded from my attatchment. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5. Click on Options, check USB mode.
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your downloaded scatter.txt file. By default you will have only one map file of name MT6575_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked. Now click on the "RECOVERY" just right to the checkbox and browse and select the cwm.img file you downloaded from the attachment below.
9. Now click on "Download" on the Application or press F9 on keyboard. Warning messages will occur, but ignore them..
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Down button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
BUGS / Not functioning features :
Backing up the data not working
USB mount SDCARD through recovery not working
Credits:
I, Me & Myself..
EDIT:
i have tried removing some bugs, try and tell me u all!!!
I have also included the stock recovery.img file in the attatchment for people who want the stock recovery.
********************Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!*********************
..& hey plz if u think i deserve thanks then don't forget to thank me by pressing the thanks button below :victory:
Good Job done
Built from source or using web builder?
i cant flash this through sp - tool
vshlkmr said:
CWM RECOVERY FOR THE KARBONN A18!!
Hey guys!! Finally i ported the ClockWorkMod ICS recovery (non-touch) onto our device!!
For people who dont know what CWM recovery and its benefits are, read this -> http://www.addictivetips.com/mobile/what-is-clockworkmod-recovery-and-how-to-use-it-on-android-complete-guide/
So, here are the steps on getting the CWM on Karbonn A18-
What you need
1. Karbonn A18, data usb cable.
2. Download the CWM recovery image file from the attachment below this post.
3. Download SP Flash Tool from my another post -> http://forum.xda-developers.com/attachment.php?attachmentid=1353992&d=1348592592
4. Download MTK6575 Driver from -> http://forum.xda-developers.com/attachment.php?attachmentid=1353943&d=1348591411
5. Download the MTK6575 Scatter.txt file from the attachment below this post.
Installation Steps-
1. Unzip and Install the MTK6575 USB drivers on your Windows PC, just run setup.exe.
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2. Copy the CWM recovery file that you downloaded from my attatchment. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5. Click on Options, check USB mode.
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your downloaded scatter.txt file. By default you will have only one map file of name MT6575_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked. Now click on the "RECOVERY" just right to the checkbox and browse and select the cwm.img file you downloaded from the attachment below.
9. Now click on "Download" on the Application or press F9 on keyboard. Warning messages will occur, but ignore them..
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Down button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
Credits:
I, Me & Myself..
..& hey plz if u think i deserve thanks then don't forget to thank me by pressing the thanks button below :victory:
Click to expand...
Click to collapse
while downloading i got the error
reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
First Check if the MTK drivers are installed, check it by going tinto the device managers hardware section in my computer
If it is proper then try connecting your phone without the battery inserted
Same problem..
reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
I'm facing the same problem.. I tried with battery in and out.. have installed the drivers as well..
i ported this recovery from a ZOPO Z900 Leader chinese android handset...i tried building from source, but i failed at it because of partition style in a18...
For people facing problems flashing it through sp tools, u all can try to flash it using another pc or alternatively view this youtube video -> http://www.youtube.com/watch?v=969xwsUTkSY
ujjwalk308 said:
I'm facing the same problem.. I tried with battery in and out.. have installed the drivers as well..
Click to expand...
Click to collapse
Same problem here.
Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!
vshlkmr said:
Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!
Click to expand...
Click to collapse
Ok.now waiting for the bugfix.
reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
always usb cable error
Connect usb cable & discconet auto & charging mode
this is usb driver ????
great job. im a noob at this so will try after people posting have successfully ported the cwm to their phone
There are two recovery.img files in your attachments. recovery.img and cwmfinal.img. Which one should be used in sp flash tool?
I recently purchased Karbonn a21, can I try this on it?
Sent from my GT-I9300 using xda app-developers app
Thnx bro worked like a charm.
Sent from my Karbonn_A18 using xda app-developers app
fail root
plz send device manager screen shot
Can anyone please upload stock rom of karbonn a18. My device stock at boot animation screen.
Sent from my GT-P1000 using xda premium
reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
same problem any help pz
Cwm flashed
I have successfully installed cwm on my karbonn a18.
I did it wit the help of mobileunckle tools.
What are the next motives now??
1) can we change the battery indicator at the notification area to percentage signs?
vshlkmr said:
CWM RECOVERY FOR THE KARBONN A18!!
Hey guys!! Finally i ported the ClockWorkMod ICS recovery (non-touch) onto our device!!
For people who dont know what CWM recovery and its benefits are, read this -> http://www.addictivetips.com/mobile/what-is-clockworkmod-recovery-and-how-to-use-it-on-android-complete-guide/
So, here are the steps on getting the CWM on Karbonn A18-
What you need
1. Karbonn A18, data usb cable.
2. Download the CWM recovery image file from the attachment below this post.
3. Download SP Flash Tool from my another post -> http://forum.xda-developers.com/attachment.php?attachmentid=1353992&d=1348592592
4. Download MTK6575 Driver from -> http://forum.xda-developers.com/attachment.php?attachmentid=1353943&d=1348591411
5. Download the MTK6575 Scatter.txt file from the attachment below this post.
Installation Steps-
1. Unzip and Install the MTK6575 USB drivers on your Windows PC, just run setup.exe.
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2. Copy the CWM recovery file that you downloaded from my attatchment. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5. Click on Options, check USB mode.
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your downloaded scatter.txt file. By default you will have only one map file of name MT6575_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked. Now click on the "RECOVERY" just right to the checkbox and browse and select the cwm.img file you downloaded from the attachment below.
9. Now click on "Download" on the Application or press F9 on keyboard. Warning messages will occur, but ignore them..
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Down button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
BUGS / Not functioning features :
Backing up the data not working
USB mount SDCARD through recovery not working
Credits:
I, Me & Myself..
EDIT:
i have tried removing some bugs, try and tell me u all!!!
I have also included the stock recovery.img file in the attatchment for people who want the stock recovery.
********************Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!*********************
..& hey plz if u think i deserve thanks then don't forget to thank me by pressing the thanks button below :victory:
Click to expand...
Click to collapse
will you please give CWM for Micromax A90 specification maybe same as A18
here is Specification
Micromax A90
Super Amoled Plus LCD with 262 k
MTK6575 CPU 1 Ghz
512 MB RAM (350 - 400) User available
512 MB ROM ( its not RAM ) for apps
2.5 GB external SD for media file ( Music/Video,,,etc.)
8 Mega Pixel Camera + 0. Mega Pixel Front Camera
Android OS 4.0.3
with Rooted cell
plz help us to create new CWM + Custom ROM
also its same specification from some Chinese Brand like Zoppo / Hero / Gionnee / HDC
plz help.
Pritesh.mohan said:
I have successfully installed cwm on my karbonn a18.
I did it wit the help of mobileunckle tools.
What are the next motives now??
1) can we change the battery indicator at the notification area to percentage signs?
Click to expand...
Click to collapse
You could do that before flashing Cwm aswell.. Use rom toolbox.. I did it the day I got this phone
Introduction :
Hey Guys so we successfully extracted the 4.4.2 stock ROM, Rooted it and Uploaded!
1st Let's Begin with How To ROOT and Flash Recovery on your XOLO Q1010i (works on both JB & KK)
Downloads:
-MTK USB Drivers (HERE)
- MT6582 Scatter File (HERE)
-NEW CTR Recovery by Chirag Jain for Q1010i Only (HERE)
-SP Flash Tools v3.1352.01 (5.1352.01) (HERE)
-SuperSu Zip (Download and Move it to your SD Card) (HERE)
Instructions:
PS - Place all Downloaded Files in the same Place for Easy Access (See Attachment For Screenshots)
Step 1: Install The MTK USB Drivers on Your PC by Clicking on Install.bat
If it Doesn't work See THIS
Step 2: Open SP Flash Tools folder and click on flash_tool.exe (See Attachment For Screenshots)
Step 3: In The Flash Tool window Click on Scatter-Loading, Select MT6582_Android_Scatter.txt and Press Open (See Attachment For Screenshots)
Step 4: In Flash Tool Window Check (Tick) RECOVERY and Click on the Blank Green Space Beside It and select Recovery.img (See Attachment For Screenshots)
Step 5: Press on Download Button at Top, Switch Off Your Device and Connect it to your PC (See Attachment For Screenshots)
Step 6: The Below Bar will Change it's Color Red Then Yellow and Finally show a Download OK Dialog Box (See Attachment For Screenshots)
Step 7: Now Disconnect Your Phone, Close Flash tools, Press and Hold Volume UP and Power Button Together till it powers UP
Step 8: It'll take you to Recovery Mode, In it Press Install Zip ---> Choose Zip SDCard ---> Select the SuperSu.zip You Placed Earlier in Your SDCard and Press YES Install
Step 9: On Complete Installation, Reboot Your Device, CONGRATULATIONS !!!! You've Successfully ROOTED and Flashed Recovery on Your Device !!!
Note:
If SP Flash Tools Shows You PMT Error Just Download the Preloader.bin From (HERE) and Flash it along with the Recovery through Sp Tools
Procedure is same You'll Just have to tick Preloader option and Load Preloader.bin also
Credits:
Chirag Jain For Porting CTR v2.2 Recovery for XOLO Q1010i
Nishan Goswami For Testing
Chainfire For Making SuperSu
Mediatek For SP Flash Tools
Here's How ROOT and Flash Recovery on Your Phone Without Touching Your PC
Instructions:
-Download and Install Framaroot( v1.9.1 Tested to be Working !!!) HERE
-Open The App and Select SuperSu from Dropdown Menu and press Bahahir,It'll be ROOTED!!!
-Download and Install Mobile Uncle tools From Play Store (HERE)
-Download CTR v2.2 Recovery.img (HERE) and place it in your SDCard Directly (Don't place it inside any Folder)
-Open Mobile Uncle Tools, Select Recovery update, Select Recovery.img From there, Press OK And Then Reboot into Recovery Mode !!!
DONE!!! You've Successfully Flashed Recovery on Your Device!!!
KK users follow this for Rooting without PC
Step 1: Root Your Device
Android 4.4.x
Download Rooting Package (HERE)
The Package contains KingRoot, SuperSu and ES File Explorer
PS- Make sure to turn off data/WiFi while Rooting
Steps:
1. Download the Package and Install Kingroot App from there
2. Open the App and Press on the Green Button on It
3. When A Tick Mark Shows , It means you’re Rooted!!!
STEP 2: Flash Recovery on your device
-Find Custom Recovery (HERE) for your Device
-Download Rashr from Play Store
-Place downloaded recovery.img on your SDCARD
-Open Rashr and Select Recovery from Storage
-In that menu select the .img file and Select Yes, please
--Now Reboot to Recovery
-And You’re done!!!
Flashing Q1010i (4.4.2-KitKat Stock ROM through Recovery
Here's HOW To Flash 4.4.2 Stock ROM Through Recovery (JB n KK)
Instructions
-Make Sure You've Flashed CTR Recovery on Your Device (See Post 1 & 2 for More Details)
-Download Flashable Zip of Stock 4.4.2 ROM from (HERE)
-Download SuperSu Zip from (Here)
-Place Both the Files in Your SD Card, Goto Recovery Mode
-In Recovery Mode Go To Install ---> Install from SD ----> Select the ROM File and press YES to Flash it and Do the Same for the SuperSu Zip after Flashing completes
-Reboot and Enjoy !!!
Credits:
Ritesh Nair for the Stock 4.4.2 Zip
Download links
hi,
i have updated mine to kitkat and can not gain root access
can you upload the recovery and rom pls
HOW To Flash Stock ROM on Your Device Through SP TOOLS
Here's HOW To Flash Stock ROM on Your Device Through SP TOOLS
Requirements:
-SP TOOLS v5.1352.01 (DOWNLOAD HERE)
-STOCK ROM For Your Device (4.4.2 KitKat ROM HERE) (4.2.2 Jelly BeanROM HERE)
-MTK USB Drivers (HERE)
-A PC with Windows 7 or Later
Instructions:
-Download and Extract the Stock ROM you Downloaded Above
-Download and Install the MTK USB Drivers from Above
-Extract SP TOOLs and Run Flash_tool.exe
-In the SP TOOLs Window Select Scatter Loading and Select MT6582_Android_scatter.txt Found in the Stock ROM folder you Just Extracted
-Press Download Button on the Top, Switch OFF and Connect Your Device to the PC
-The Flashing Will Start and You'll see Thew Bottom Status bar changing Color from Red, Purple to Yellow, Once Flaching is Complete You'll see a Download OK Dialog Box
-Now Disconnect your Phone and Power it Up!!!!
Thread Updated
Sent from my C2305 using Tapatalk
Thread Updated !!!!
Not working
bgos10 said:
Introduction :
Hey Guys so we successfully extracted the 4.4.2 stock ROM, Rooted it and Uploaded!
1st Let's Begin with How To ROOT and Flash Recovery on your XOLO Q1010i (works on both JB & KK)
Downloads:
-MTK USB Drivers (HERE)
-MT6582 Scatter File (HERE)
-CTR Recovery by Chirag Jain for Q1010i Only (HERE)
-SP Flash Tools v3.1352.01 (5.1352.01) (HERE)
-SuperSu Zip (Download and Move it to your SD Card) (HERE)
Instructions:
PS - Place all Downloaded Files in the same Place for Easy Access (See Attachment For Screenshots)
Step 1: Install The MTK USB Drivers on Your PC by Clicking on Install.bat
If it Doesn't work See THIS
Step 2: Open SP Flash Tools folder and click on flash_tool.exe (See Attachment For Screenshots)
Step 3: In The Flash Tool window Click on Scatter-Loading, Select MT6582_Android_Scatter.txt and Press Open (See Attachment For Screenshots)
Step 4: In Flash Tool Window Check (Tick) RECOVERY and Click on the Blank Green Space Beside It and select Recovery.img (See Attachment For Screenshots)
Step 5: Press on Download Button at Top, Switch Off Your Device and Connect it to your PC (See Attachment For Screenshots)
Step 6: The Below Bar will Change it's Color Red Then Yellow and Finally show a Download OK Dialog Box (See Attachment For Screenshots)
Step 7: Now Disconnect Your Phone, Close Flash tools, Press and Hold Volume UP and Power Button Together till it powers UP
Step 8: It'll take you to Recovery Mode, In it Press Install Zip ---> Choose Zip SDCard ---> Select the SuperSu.zip You Placed Earlier in Your SDCard and Press YES Install
Step 9: On Complete Installation, Reboot Your Device, CONGRATULATIONS !!!! You've Successfully ROOTED and Flashed Recovery on Your Device !!!
Credits:
Chirag Jain For Porting CTR v2.2 Recovery for XOLO Q1010i
Nishan Goswami For Testing
Chainfire For Making SuperSu
Mediatek For SP Flash Tools
Click to expand...
Click to collapse
I tested it and it is not working for me when I try to download it gives me an error that PMT is changed for this ROM and must be downloaded. Any fix for this?
---------- Post added at 06:32 AM ---------- Previous post was at 06:30 AM ----------
bgos10 said:
Here's HOW To Flash Stock ROM on Your Device Through SP TOOLS
Requirements:
-SP TOOLS v5.1352.01 (DOWNLOAD HERE)
-STOCK ROM For Your Device (4.4.2 KitKat ROM HERE) (4.2.2 Jelly BeanROM HERE)
-MTK USB Drivers (HERE)
-A PC with Windows 7 or Later
Instructions:
-Download and Extract the Stock ROM you Downloaded Above
-Download and Install the MTK USB Drivers from Above
-Extract SP TOOLs and Run Flash_tool.exe
-In the SP TOOLs Window Select Scatter Loading and Select MT6582_Android_scatter.txt Found in the Stock ROM folder you Just Extracted
-Press Download Button on the Top, Switch OFF and Connect Your Device to the PC
-The Flashing Will Start and You'll see Thew Bottom Status bar changing Color from Red, Purple to Yellow, Once Flaching is Complete You'll see a Download OK Dialog Box
-Now Disconnect your Phone and Power it Up!!!!
Click to expand...
Click to collapse
So is this Stock ROM is pre-rooted? or just pure stock ROM? because above rooting method is not working for me so I can try this one.
XenonTNT said:
I tested it and it is not working for me when I try to download it gives me an error that PMT is changed for this ROM and must be downloaded. Any fix for this?
---------- Post added at 06:32 AM ---------- Previous post was at 06:30 AM ----------
So is this Stock ROM is pre-rooted? or just pure stock ROM? because above rooting method is not working for me so I can try this one.
Click to expand...
Click to collapse
4.4.2 is rooted, 4.2.2 is not
Sent from my C2305 using Tapatalk
I got the fix while mobile is switch off we need to press volume up + power button after download button is pressed in sp tool to start downloading in mobile. Also to root on KitKat we need preloader file of kitkat also. So kindly upload it for other users I am downloading whole KitKat stock ROM.
The recovery does not seem to get flashed on JB stock rom. I tried with mobileuncletools...
it says reboot into recovery mode but simply restarts. may be working on kitkat but i have not tried. actually i did not really like the kitkat update. It takes away backup and restore app. and in exchange you get printing support and news widget which never gets the location. also messes up with Mifileexplorer and apex launcher. i have flashed TWRP and after taking backup of stock rom i can play with the kitkat update maybe...
thanks for the effort.
Thread Updated, now tested multiple times and new ctr recovery link added
please root xolo q1000 opus kitkat
q1000 opus is different from q1000.
q1000 opus has broadcom processor.
please root the kitkat build as the jb is rooted but kitkat has not been rooted by any dev
Help.. I'm still geting PMT error.. I also load prelaoder bin along with recovery.. But getting error.. Help .
My phone is rooted kitkat(4.4.2) ..i also pressed volume up and power button.. [emoji37][emoji24]
Sent from my Q1010i using Tapatalk
which is the most reliable method of rooting
framaroot or this method????
Root
Reconfigured said:
which is the most reliable method of rooting
framaroot or this method????
Click to expand...
Click to collapse
Farmaroot will not work after Kit Kat upadate. If you have stock Jelly Bean then use farmaroot method.
If you want rooted kitkat use this method.
Does not work on Xolo Q1010i with Android 4.4.2
bgos10 said:
Introduction :
Hey Guys so we successfully extracted the 4.4.2 stock ROM, Rooted it and Uploaded!
1st Let's Begin with How To ROOT and Flash Recovery on your XOLO Q1010i (works on both JB & KK)
Downloads:
-MTK USB Drivers (HERE)
- MT6582 Scatter File (HERE)
-NEW CTR Recovery by Chirag Jain for Q1010i Only (HERE)
-SP Flash Tools v3.1352.01 (5.1352.01) (HERE)
-SuperSu Zip (Download and Move it to your SD Card) (HERE)
Instructions:
PS - Place all Downloaded Files in the same Place for Easy Access (See Attachment For Screenshots)
Step 1: Install The MTK USB Drivers on Your PC by Clicking on Install.bat
If it Doesn't work See THIS
Step 2: Open SP Flash Tools folder and click on flash_tool.exe (See Attachment For Screenshots)
Step 3: In The Flash Tool window Click on Scatter-Loading, Select MT6582_Android_Scatter.txt and Press Open (See Attachment For Screenshots)
Step 4: In Flash Tool Window Check (Tick) RECOVERY and Click on the Blank Green Space Beside It and select Recovery.img (See Attachment For Screenshots)
Step 5: Press on Download Button at Top, Switch Off Your Device and Connect it to your PC (See Attachment For Screenshots)
Step 6: The Below Bar will Change it's Color Red Then Yellow and Finally show a Download OK Dialog Box (See Attachment For Screenshots)
Step 7: Now Disconnect Your Phone, Close Flash tools, Press and Hold Volume UP and Power Button Together till it powers UP
Step 8: It'll take you to Recovery Mode, In it Press Install Zip ---> Choose Zip SDCard ---> Select the SuperSu.zip You Placed Earlier in Your SDCard and Press YES Install
Step 9: On Complete Installation, Reboot Your Device, CONGRATULATIONS !!!! You've Successfully ROOTED and Flashed Recovery on Your Device !!!
Note:
If SP Flash Tools Shows You PMT Error Just Download the Preloader.bin From (HERE) and Flash it along with the Recovery through Sp Tools
Procedure is same You'll Just have to tick Preloader option and Load Preloader.bin also
Credits:
Chirag Jain For Porting CTR v2.2 Recovery for XOLO Q1010i
Nishan Goswami For Testing
Chainfire For Making SuperSu
Mediatek For SP Flash Tools
Click to expand...
Click to collapse
I tried the step mentioned above more than couple of times but it does not work
just a stupid question,,,does all mt6582 chopset device have the same scatter file,,,even in different phone brands?
kimerika said:
just a stupid question,,,does all mt6582 chopset device have the same scatter file,,,even in different phone brands?
Click to expand...
Click to collapse
Ya unless the scatter is modified manually
I successfully rooted my phone. Thanks a lot. I wanted to change my phone's font cause I got bored of same old font.
Sent from my Q1010i using Tapatalk
Only for HTC Desire 526G dual sim Firmware VER: Stock 1.02.401.3Warning !!! Before Flash PLS Backup NVRAM
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Installation and configuration of SP Flash Tool
1. Unzip archive SP Flash Tool v5.1548.00.000 in C:/
2. Unzip Firmware in Dir of SP Flash Tool v5.1548.00.000 (ex. C:/SP Flash Tool v5.1548.00.000/firmware)
3. Start SP Flash Tool v5.1548.00.000. in "DOWNLOAD-AGENT" Choose MTK_AllInOne_DA.bin
4. Choose Scatter file from Firmware Folder
5. GOTO Programs settings Connection and choose USB + High speed + auto detect
6. Under Scatter-Loading you must choose "DOWNLOAD ONLY"
7. All done.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
How to Backup/Restore NVRAM Requirements
1. ROOTED Phone
2. Turned ON USB Debugging
3. Installed ADB drivers
4. MTK Droid Tools
Process of Backup
1. Start MTK Droid Tools and connect device to PC
2. Wait before "Phone information" get filled information about phone.
3. If the bottom left is lit yellow rectangle in the right MTK Droid Tools lower-right corner, click ROOT (if you get confirmation window, click Yes) and look on the screen of your device, it will be necessary to allow root access for MTK Droid Tools. If the rectangle is green, you can continue, if the blue, you haven't root rights.
4. After MTK Droid Tools got root access, press the big button IMEI / NVRAM, and click on the Backup button (make sure that there are two check boxes in front of buttons and Backup Restore)
5. All NVRAM backup section will take just a couple of seconds to backup. Backup will be stored in the same directory where is the .exe file of MTK Droid Tools, and you will get two files, one in .bin format, the other in .tar format
+++++++++++++++
Requirements
1. ROOTED Phone
2. Turned ON USB Debugging
3. Installed ADB drivers
4. MTK Droid Tools
Process of Restore
1. Start the MTK Droid tools and connect the device to your computer
2. Press the ROOT button and allow root access to the devices screen.
3. Click the big button IMEI / NVRAM and then select Restore
4. Select your backup file in .bin format, and then select the .tar file
5. NVRAM is restored within a couple of seconds
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Lets start flashing Firmware
1. Start SP Flash Tool.
2. Press button "Scatter-loading" and choose file MT6582_Android_scatter.txt (This file is located in Firmwares folder)
3. Press button "DOWNLOAD"
4. AFTER that Press on device VOL + (dont release before it starts flashing ) and connect USB. it will start flashing. If your phone is not detected, disconnect it from your computer, remove and reinsert the battery and reconnect to your computer. In Device Manager, when correctly installed drivers at the time of the firmware have in com-ports watch mtk the usb port (the MediaTek Preloader USB VCOM Port) . And on completion of the firmware, or in the event of a device error is turned off and disappears from the Device Manager. When the flashing process will start, you can release the button
5. When you see a message about the successful Flashed, close the program, disconnect the Device from the PC, insert the battery and turn on :good:
PS... if cant flash with SP Flash Tool v5.1548 try with SP_Flash_Tool_v5.1352.01_SEC
PS... if dont start flashing pls try to change the file extension the Checksum.ini to the Checksum.oem
Drivers:
1. Stock Drivers
2. MTK Drivers Installer
3. MTK USB 1.2
Tools:
1. MTK Droid Tools v253
2. ToolHero APK
Firmware:
1. Stock 1.02.401.3
SP FlashTool
1. SP Flash Tool v5.1352.01_SEC
2. SP Flash Tool v5.1548.00.000
3. SP Flash Tool v5.1632.00.000
HTC Desire 526G dual sim
Firmware VER: Stock 1.03.401.6
Add this firmware please
Owl gamers said:
HTC Desire 526G dual sim
Firmware VER: Stock 1.03.401.6
Add this firmware please
Click to expand...
Click to collapse
Itokkey ariyavo
Kiduvey
Had screen error before so i cannot unlock phone to retrieve photos and videos. Tried flashing but basically bricked the unit since im a noob. Now it wont turn on, I have "unrecognized usb device" error when plugged to PC. How can I revive the unit and is the data still retrievable?
Yes,you can try the following steps but I cannot give you full gurantee that it will work. Anyways trying is better than nothing.
Download files using this link: https://docs.google.com/uc?id=0BzeT4pCC5KBxcGVadWtZV0ExZXM
Download drivers using this link: http://www.mediafire.com/?bhm18trn6imms5y
Now follow the steps
Step 1: Download Lenovo P1 Stock ROM Firmware zip file in your PC and extract it. (It includes Scatter files, SP Flash Tool, and Drivers).
Step 2: Download Lenovo USB Drivers and install it PC.
Step 3: Go to extracted folder “extracted in Step 1” > SP flash tool > you will see Flash-Tool.exe > Open this to Launch setup.
Step 4: One setup is launched Click on > Download Tab > Scatter Loading. Now locate scatter firmware file (Present firmware folder extracted in Step 1) and load it.
Step 5: Connect your device with PC via data cable Now click on Download Button / Upgrade Button (having sign of Green Arrow) to begin flash Flashing.
Step 6: Wait Until process complete. In end of Successful Flash Lenovo P1 Stock ROM Firmware, a Green dot / ring will appears.
Maybe your mobile will become working but you will not recover any data
ALL THE BEST
Regards milkyway3
Leave it to discharge itself (takes up to 3-4 days, on my experience) then use the steps given above. It "ressurected" my unit which was able to power up but the screen wouldn't turn on.
Ignore the Anti-Rollback system for Redmi Note 5
All actions you take at your own risk and risk. The project management is not responsible for the consequences of its actions.
From the MIUI 10 developers have introduced for Xiaomi redmi Note 5 special system of "anti-rollback» (Anti-rollback), which blocks the possibility of installing the previous version of MIUI, in addition, can affect the installation of custom firmware When you try to roll back or install the custom firmware, you can get a "brick", so if you are the owner of the device, be careful to follow the steps below:
preparation:
Download the current firmware MIUI 10 Fastboot for redmi Note 5 from the official site: http://en.miui.com/a-234.html (? redmi Note 5 Latest global developer Fastboot version download file)
Download the My Flash program: http://portal.mi-room.ru/files/mi-flash/ and unzip it in C: /
Download the file for the installation of TWRP Recovery: adb.zip: http://files.mi-room.ru/files/pc/antirb/adb.zip
Download the latest MIUI MIRUM firmware from our site
On the C: / computer drive create a "Whyred" folder and extract the downloaded firmware «whyred_global_images_X.XX», as well as a file for adb.zip rekaveri installation
Installation:
We transfer the phone to Fastboot mode: to do so, turn it off and hold down the volume key and the power key until the corresponding mode appears.
Connect the phone to the computer
Start the My Flash program, click on select and select the folder with the unpacked firmware "whyred_global_images_X.XX".
In the lower right corner, select Clear all; otherwise, the boot loader will be blocked again.
Press update, the list should show the device
Press flash to start the firmware and wait for it to complete
After the firmware, the phone will start in the system.
Once the system has been fully started, turn off the phone again and press and hold the volume down button and the power button to enter the quick start mode. (the phone must be connected to the computer)
In the folder C: / whyred / adb / start the file start.bat
The installation process of the stub (dummy.img - to bypass the anti-rollback system) and the recovery TWRP (recovery.img) will start
After that, the phone will reboot in TWRP Recovery
We make a total destroy them partition data, the vendor, the system. We also recommend that you run the data format. (If an error occurs during deletion or formatting, simply restart TWRP Recovery and try again).
We remove the firmware previously downloaded from MIUI MiRum to the phone memory through MTP and install it through TWRP Recovery.
Fact! You can install more firmware securely through TWRP Recovery, as usual, the main thing is that the version is not inferior to the installed version.
Firmware with Anti-Rollback: http://files.mi-room.ru/roms/8.8.16/RedmiNote5_MIUI_8.8.16_MiRoom_8.1.0.zip
Source: http://portal.mi-room.ru/instrukcii/obhod-sistemy-anti-otkata-dlja-redmi-note-5/
Regards
vcx77 said:
... On the C: / computer drive create a "Whyred" folder and extract the downloaded firmware «whyred_global_images_X.XX», as well as a file for adb.zip rekaveri installation ...
Click to expand...
Click to collapse
Wrong forum! This is the vince forum. Your instructions are for whyred, which is a completely different device.