I tried to flash the new ver of TWRP 2.7 - it appeared to be ok after flashing. I then tried to reboot and my Nexus 7 is DEAD!
It had appox 70 charge so I am pretty sure that is not the problem. I have tried to manually boot into recovery - same result nothing.
Anyone have any ideas what I can do to fix the problem?
Thanks much!
tgatlinjr said:
I tried to flash the new ver of TWRP 2.7 - it appeared to be ok after flashing. I then tried to reboot and my Nexus 7 is DEAD!
It had appox 70 charge so I am pretty sure that is not the problem. I have tried to manually boot into recovery - same result nothing.
Anyone have any ideas what I can do to fix the problem?
Thanks much!
Click to expand...
Click to collapse
How were you flashing it? Manually or toolkit? Can you get to the bootloader? If so, fastboot flash the factory image.
charesa39 said:
How were you flashing it? Manually or toolkit? Can you get to the bootloader? If so, fastboot flash the factory image.
Click to expand...
Click to collapse
I tried to power on by holding down the volume up/down volume buttons - would not power on by other method. Totally dead!
tgatlinjr said:
I tried to power on by holding down the volume up/down volume buttons - would not power on by other method. Totally dead!
Click to expand...
Click to collapse
Volume up + power= recovery.
Volume down + power=bootloader.
Neither of those work?
meekrawb said:
Volume up + power= recovery.
Volume down + power=bootloader.
Neither of those work?
Click to expand...
Click to collapse
That is correct - Neither work, I have tried both many times.
I, also have connected it to my computer using the Nexus Tool Kit by Wugfresh. When I plug the usb cable into the Nexus there is a sound as if the computer sees the pad - but nothing works on the toolkit - it comes back saying it does no detect the ADB connection. it was working a couple of days ago when I used it.
STILL STUMPTED!
tgatlinjr said:
That is correct - Neither work, I have tried both many times.
I, also have connected it to my computer using the Nexus Tool Kit by Wugfresh. When I plug the usb cable into the Nexus there is a sound as if the computer sees the pad - but nothing works on the toolkit - it comes back saying it does no detect the ADB connection. it was working a couple of days ago when I used it.
STILL STUMPTED!
Click to expand...
Click to collapse
This is a stumper indeed.
How did you flash the new TWRP? Recovery, toolkit, or bootloader?
Are you using Windows? What shows up in the Windows Device Manager when you plug it into your computer?
This is a long shot, but sometimes you have to hold the power button down for more than a minute to get it to boot.
meekrawb said:
This is a stumper indeed.
How did you flash the new TWRP? Recovery, toolkit, or bootloader?
Are you using Windows? What shows up in the Windows Device Manager when you plug it into your computer?
This is a long shot, but sometimes you have to hold the power button down for more than a minute to get it to boot.
Click to expand...
Click to collapse
Hi -
I tried holding the power button down for over three minutes - no luck.
I downloaded the latest TRWP zip file from their website and then flashed it with the older version of TWRP - I thought I had done this before. Was that a bad move?
I am using Windows and the Device Manager shows the Yellow ! followed by "QHSUSB_Dload". I have no clue what that means - I hope it helps and someone recognizes it.
Thanks for the reply!
Ted
tgatlinjr said:
Hi -
I tried holding the power button down for over three minutes - no luck.
I downloaded the latest TRWP zip file from their website and then flashed it with the older version of TWRP - I thought I had done this before. Was that a bad move?
I am using Windows and the Device Manager shows the Yellow ! followed by "QHSUSB_Dload". I have no clue what that means - I hope it helps and someone recognizes it.
Thanks for the reply!
Ted
Click to expand...
Click to collapse
The TWRP site only has img files available for download, so I'm not sure which file you flashed.
I don't have any experience with qhusb_dload. Searching through the forums here didn't reveal much except to say that holding volume down and power eventually got to the bootloader.
Hopefully somebody else reading this has some ideas...
meekrawb said:
The TWRP site only has img files available for download, so I'm not sure which file you flashed.
I don't have any experience with qhusb_dload. Searching through the forums here didn't reveal much except to say that holding volume down and power eventually got to the bootloader.
Hopefully somebody else reading this has some ideas...
Click to expand...
Click to collapse
This is not true there is a flashable version too, that's how I flashed mine. Silly question have you plugged your pad into the mains charger for at least half an hour, and try again =hold down -volume and power botton. hope it works mate!
Sent from my Nexus 7 using Tapatalk
Bootloader is corrupt, no way one can bring it back on. I think you must have flashed recovery of some other device.
Send it back to asus or find someone who can jtag it.
Btw where are flashable zips of recovery on official twrp website? I have only seen img files
Hey guys, i got an issue.
after updating to lollipop, the speaker and the microphone did not work.
first i update via OTA, and then try clean update via PC companion but still get the same issue.
any help will be appreciated.
optimus.prime said:
Hey guys, i got an issue.
after updating to lollipop, the speaker and the microphone did not work.
first i update via OTA, and then try clean update via PC companion but still get the same issue.
any help will be appreciated.
Click to expand...
Click to collapse
Is there a way you can go back to KK? If you're getting sound then it's the Lollipop ROM, if not, your phone needs work!
Try safe mode to verify if sound is working or not.
1. press & hold the device Power button
2. power off options will appear.
3. on touch screen, hold power off untill, reboot to safe mode dialogue appears, then click OK.
4. when boot done, try playing any audio/mp3 file,
5. if working well in safe mode, then some 3rd party app is causing trouble, find it & update or uninstall it.
6. if in safe mode, you can't hear sound, thats bcoz lollipop update went wrong bcoz of you have update on root access.
7. To exit safe mode, turn your device off and on again. thats all!
Hello Everyone!
So my issue: I wanted to try flashing a new android system on my phone so I made some steps. First I rooted it there was no problem. Second I unlocked bootloader following the instructions on Sony developer website. After that I tried to start up the phone and enter recovery mode using the volume up key. That didn't work and the phone started to boot up but never booted. So I had to remove the battery and then put it back in. After that I've had several tries of booting into recovery mode but with no success. I assume the phone got stuck in a boot-loop. Alright then I falshed the original Android 4.3 stock ROM to my phone using Flashtool software. That actually was successful and my phone was back in it's original state.
So here comes the problem: phone is working correctly but it's like it isn't recognizing the 3.5 mm jack connector. Specificly when I plug in any kind of headphones I can't make the phone to use it in any way, it continues using the speakers. I've tried Sony Smart Connect app, phone still doesn't know that it has got a jack connector. The only way I was able to make the phone actually use the jack output instead of the speakers was to restart the phone with the headphone plugged in: in this case the phone uses only the jack output to play any sounds but not the speaker, even if i unplug the headphone. Still no speakers, phone is just forcing the jack output even if there is no connection... So basically the phone gets stuck either on the jack outpot or on the speakers after restart and I can't make it to use the other one anyhow. Please help me, I've been trying to fix this for hours.
I hope my problem is understandable, I'm not a native english-speaker.
Thanks in advance!
hi
i have a nexus 5X 7.1.2 rooted
i rooted device for increase the headphone volume
but i want to know if i increased the headphone volume from System file
it can damage my device ?
please help me
My brothers phone Motorola e5 plus (hannah) is rebooting after unplugging it from my laptop and booting into recovery TWRP i don't know what to do with this. If you can help me Thank you my friend Greeting from Poland!!!
P.s front speaker is an primary and i don't hear any sound from it.