Hello Everyone,
I have HTC Desire Z with android 2.3.3 and i face a problem with its screen as following:
the screen when i turn on the mobile it's black even when the mobile enter to the system and home page
the screen still black but all function are working will
I test the touch and the preview of the screen by SnapPea software which make me able to see what screen display live
when i touch the mobile to the PC.
but unfortunately i try to factory reset from the SD storage and so i delete the SnapPea from mobile so i couldn't be able to connect the mobile to this software in PC anymore.
What I did before the screen became black:
- I try to root my mobile by using the three software: visionary+ , ROM Manager but the root operation didn't completed successfully
so i delete the software from the mobile.
- after the mobile locked after the time outed the screen change to black and didn't work again
can any one help me to define if the problem done from software issue or it need to replace the screen
note:
i couldn't able to enter the bootloader screen or the factory reset "by click volume down + power on the turning on the mobile"
the screen is black in this stage too
thanks for you
I have a question about VPN and certificate installation. My phone is H818P and I'm on stock android 6. If I want to set up a connection to a VPN (home server), the table with the settings covered by the unlock pattern - I type the pattern (correctly) but the table with settings disappears - this is repeated all the time. Same problem for android 5.1.
My other problem is installing the certificate for AdCleaner - the installation requires a pattern + pin (the pin needs to be created whenever I create a pattern). When installing a certificate, I enter the pattern and pin correctly, but the pin returns my phone as faulty and the installation does not take place. Same problem with Android 5.1.
Android 7 (v29a) is working correctly. Unfortunately, I can not use this version because it is not possible to shoot video at 60fps (V10 camera port does not work). Is there any possibility to shoot in android 7 videos at 60 fps - some hack stock applications?
I am sorry for my bad English
This Method Worked on the One Plus 3T
[GUIDE] Activating USB-Debugging blind with black/broken screen via OTG and restoring data with MTP
https://forums.oneplus.com/threads/guide-activating-usb-debugging-blind-with-black-broken-screen-via-otg-and-restoring-data-with-mtp.717039/
The Phone Unlocks and i am Unable to Enable(mtp&usb debugging) since the layout of menu is different.
I NEED ANOTHER ZENFONE 5Z/5 USER TO TEST THIS COMMANDS ON A WORKING DISPLAY PHONE SO THEY CAN ALSO RECORD THE INPUTS TO ENTER INTO MTP & USB DEBUGGING SETTINGS.THIS WILL BE HELPFUL FOR OTHER'S VISITING THIS FORUM ALSO
MY PHONE DESC-
*Ran Over By A Car.
*Backside Not a Single Scratch nor a Glass Damaged nor Back Camera damaged.
*FRONT DISPLAY BROKEN WITH FEW PIXELS WORKING IN A HAZY WAY.
*PHONE RESPONDS TO VOICE COMMANDS ,UNLOCKS(OTG KEYBOARD) & RECEIVES PHONE CALL & WIFI IS UP
NEED TO BACKUP NO OTHER OPTION LEFT PLEASE HELP!
Urgent Need To Take Backup. Please Help
Darthvader! said:
This Method Worked on the One Plus 3T
[GUIDE] Activating USB-Debugging blind with black/broken screen via OTG and restoring data with MTP
forums.oneplus.com/threads/guide-activating-usb-debugging-blind-with-black-broken-screen-via-otg-and-restoring-data-with-mtp.717039/
The Phone Unlocks and i am Unable to Enable(mtp&usb debugging) since the layout of menu is different.
I NEED ANOTHER ZENFONE 5Z/5 USER TO TEST THIS COMMANDS ON A WORKING DISPLAY PHONE SO THEY CAN ALSO RECORD THE INPUTS TO ENTER INTO MTP & USB DEBUGGING SETTINGS.THIS WILL BE HELPFUL FOR OTHER'S VISITING THIS FORUM ALSO
MY PHONE DESC-
*Ran Over By A Car.
*Backside Not a Single Scratch nor a Glass Damaged nor Back Camera damaged.
*FRONT DISPLAY BROKEN WITH FEW PIXELS WORKING IN A HAZY WAY.
*PHONE RESPONDS TO VOICE COMMANDS ,UNLOCKS(OTG KEYBOARD) & RECEIVES PHONE CALL & WIFI IS UP
NEED TO BACKUP NO OTHER OPTION LEFT PLEASE HELP!
Click to expand...
Click to collapse
Hey Devs, need Your help, Have important data in my phone need to take backup.
Please Provide Your Input .
.
Darthvader! said:
Hey Devs, need Your help, Have important data in my phone need to take backup.
Please Provide Your Input .
Click to expand...
Click to collapse
Somehow enabled authorization for usb debugging and used scrcpy for accessing on my pc.
Thanks
rom1v/Genymobile for scrcpy.
https://github.com/Genymobile/scrcpy
Hi, i have moto g 6 play (aljeter) which doesn't have enabled 800MHz frequency for LTE. But operator in my country using this one and i wanna enable this. I tried this guide: https://forum.xda-developers.com/galaxy-s5/general/how-to-add-rf-lte-frequency-bands-to-t2886059 but without succes. I figured out instead of changing USB settings i must reboot into bootloader and select BP Tools, but when i did that phone starts to boot, device menager showing 3 unknow devices for a moment then phone boots normally. How can i enable that band? BTW i am running custom ROM (HavocOS v2.9 GSI with latest magisk)
* Your warranty is now void.
* I'm not responsible for bricked devices, dead SD cards,
* Please do some research if you have any concerns about features included in this recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, i will laugh at you.
Click to expand...
Click to collapse
Pixel Experience Plus for Galaxy S21 FE (Snapdragon/Exynos) based on Android 13Unlock bootloader first:
Go to your phone → Settings → About Phone → Software information → Press Build number 6 times until you see the notice “You’re now a developer”
Go in Settings → Developer options → enable OEM unlocking
Power off your phone first. Then, connect a side of your USB to your PC/Laptop, keep pressing volume up and down together until you go to Download Mode. Put another side of the USB into your phone.
When you arrived at Download Mode, long press volume up until you see the black screen. Confirm to unlock the bootloader and you will erase your device.
Click to expand...
Click to collapse
Guide for flashing system image:
Flash recovery for snapdragon version, i'm using: OrangeFox Recovery is also provided for exynos soc
Please do everything that is written for flashing recovery (Installation), u need to disable encryption and wipe data
reboot when you sure recovery is permanent and check if phone is on "hello screen"
How to boot on recovery first time BEFORE "hello screen":
Uncheck reboot after flash AP recovery in Odin, unplug cable and then push vol - and power -> immiedietly after turn off download mode hold vol + and power and plug in cable -> now should work
Flash GSI image:First you need to download image from here: here or find thread here: click. This images have Google Apps allready included.
Remember to use arm64 with b !
Reboot to recovery
Now u should see on PC when u connect via cable internal memory - copy image to folder, probably should be "Fox" or create new
Touch files, find image
Now select to flash System image
Reboot
And thats it you should boot to system.
Post install settingsOn Phh Treble Settings set:
Samsung features:
Use alternate audio policy
Enable stereo audio mode
Enable extended brightness range
Enable double tap to wake (if u want)
Enable reversed wireless charging (if u want to reverse charge other device)
Enable access to all cameras
Enable extra sensors
Misc features:
Force FPS to [email protected] if you want 120Hz refresh rate display
On camera set expose aux cameras and force enable camera2api
Select Use System Wide BT HAL if u use bluetooth headphones and don't have audio (tested on galaxy buds 2)
Qualcomm features:
select use alternate camera profile if u have trouble with ultrawide photos
Root access on Pixel Experience Plus:
You should first patch boot img from your stock samsung rom what you allready using
U need to select ap tar.img file in Magisk and wait to be patched
Extract boot.img from it after patch
Flash boot img in recovery on boot image
Root stays even if you reflash system on other GSI
Works:
WiFi 2.4GHz and 5GHz
RIL (phone and mobile data)
Bluetooth with bluetooth audio
fingerprint sensor
Google Pay with NFC (you need to pass safynet check if you have magisk)
120Hz display
Camera front and back (you need other camera app for using ultrawide photo)
Fastcharge
Stereo speakers
Galaxy accessories (Watch 4 and Buds 2 tested)
MHL mode
Probably other functions too
Not work/problems:
Netflix have videwine L1 but no HDR content support
Movies only record max on 30FPS on 4K
On the go don't work any of galaxy wearable devices, you need to patch via magisk some files
Clear View cases (phone don't response for open or close case) even on AOD
Some problems with updates for Chrome and web framework (need to install manual newer version)
Device is showing as Huawei Nexus 6P need to be changed somehow to our model
Workaund for Galaxy Wearable and Google Pay:
Magisk need to be in zygisk mode
Flash Universal SafetyNet Fix, here: github download
Install FoxMMM for magisk modules finder here: here, find and install MagiskHide Props Config
Flash this for workaund of wearables: gdrive module download
Now download Galaxy wearables from store, and plugins for your proper device form apkpure or other website.
You need to allow all permisions for apps first
Try to find your watch and pair it, you need to be fast to accept all pop ups - u dont need to login to samsung account , for me got it after 2-3 try, you should see "prepairing device" etc.
For galaxy buds should be easier just find it and pair.
Google Pay works out of the box after installing this modules
Get better sound and equalizer:
If you want to have better audio - you need to flash magisk module ViperFX
Download here: click here on github
Flash via magisk
Uncheck legacy mode for work
@hunter3000
Greetings. Since this appears to be a "guide," I have changed the thread designation accordingly.
-Regards: Badger50
@hunter3000 i think you can change the model number in the build.prop if im not mistaking
Hi, can i flash it like the offical pixel experience? Because the offical one is a zip file and this one not
this is GSI style rom, not specific ROM for specific model, so you must flash it by twrp or by fastboot command. Like universal rom for all phones than have project treble.
Thanks for support
Im looking to xda everyday for a stable pixel rom
MemurBey said:
Thanks for support
Im looking to xda everyday for a stable pixel rom
Click to expand...
Click to collapse
Majority of GSI are stable but you will have bugs tho. Like either bad battery life or camera isnt working
On this build all functions is working, for camera ultrawide support you need 3rd party app like OpenCamera.
hunter3000 said:
On this build all functions is working, for camera ultrawide support you need 3rd party app like OpenCamera.
Click to expand...
Click to collapse
Does Gcam Works on any Gsi on the SnapDragon variant? No freezing viewfinder?
no gcam working on snapdragon, or i dont find any working for our model.
hunter3000 said:
Please do everything that is written for flashing recovery (Installation), u need to disable encryption and wipe data
Click to expand...
Click to collapse
When disable encryption how safe is the Data stored on the Device?
OptixWolf said:
When disable encryption how safe is the Data stored on the Device?
Click to expand...
Click to collapse
you must disable encryption to boot to non official rom, so you got answer for your question
Master, any solution to this ? "Device is showing as Huawei Nexus 6P need to be changed somehow to our model ", and Call Recording is working on this version ? many thanks for your hard work to G990B version.
This device showing is related to magisk safenet fix for working root with NFC and banking apps but probably also because of GSI rom as is. No call recording as is stock Pixel Experience ROM u need to root and use some magisk module.
Works great on my Samsung s21fe just charging.. sometimes works then other times says it's charging and then does down. Doesn't really go up unless phone is off.
May I know if VoWifi / VoLTE works?