Stuck without OS and dont know what to do - Moto G5 Questions & Answers

Hey, let me start by saying that english isnt my native language and I dont know much about this so im problably doing something wrong but I cant realize what. Today I got a notification with a security update and after installing it I got stuck in bootloop. No worries I thought, but then I tried flashing a backup from twrp and that also failed. Next I flashed Lineage OS succesfully but when I booted it went directly to twrp.
Ideally I would like to do this but I cant make adb work. When I type adb devices on twrp it shows "ZY322G6LPJ recovery" but when I switch to bootlader it doesnt show anymore. Any ideas? I have been searching for an answer for hours already so if someone could help me I would reallly appreciate it! Thanks.

Follow this thread
https://forum.xda-developers.com/g5/development/official-stock-moto-g5-cedric-firmware-t3733897
Install drives & download fastboot
Open command prompt as admin where you have fastboot & the firmware located
Type the fastboot commands shown in above thread
If your twrp backup failed because of Extracttarfork errors you need to erase userdata first
fastboot erase userdata
Any other error I can't help with as I don't know how the backup was made

TheFixItMan said:
Follow this thread
https://forum.xda-developers.com/g5/development/official-stock-moto-g5-cedric-firmware-t3733897
Install drives & download fastboot
Open command prompt as admin where you have fastboot & the firmware located
Type the fastboot commands shown in above thread
If your twrp backup failed because of Extracttarfork errors you need to erase userdata first
fastboot erase userdata
Any other error I can't help with as I don't know how the backup was made
Click to expand...
Click to collapse
HTML:
right click android_usbdriver.inf
click install
click open
click yes if a admin box pops up ( if your not admin you will need admin password )
click okay on the operation completed successfully box
Ok Im starting to feel really stupid but I cant do this. When I press install nothing happens (maybe it means it installed succesfully?) but then when I open it, windows opens it with notepad and again.. Nothing happens, am I doing something wrong? I also tried installing android studio just like it says here but its doesnt show the option...

posijab said:
HTML:
right click android_usbdriver.inf
click install
click open
click yes if a admin box pops up ( if your not admin you will need admin password )
click okay on the operation completed successfully box
Ok Im starting to feel really stupid but I cant do this. When I press install nothing happens (maybe it means it installed succesfully?) but then when I open it, windows opens it with notepad and again.. Nothing happens, am I doing something wrong? I also tried installing android studio just like it says here but its doesnt show the option...
Click to expand...
Click to collapse
Just install this: https://forum.xda-developers.com/showthread.php?t=2588979 (it's an easy exe installer)
Then install motorola device manager (if adb still doesn't work)
Then open cmd and flash stock via fastboot.

Exanneon said:
Just install this: https://forum.xda-developers.com/showthread.php?t=2588979 (it's an easy exe installer)
Then install motorola device manager (if adb still doesn't work)
Then open cmd and flash stock via fastboot.
Click to expand...
Click to collapse
Yeah thats what I initially did but I cant make it work. Like I said earlier, adb recognized the device on twrp but not on bootloader if that makes sense.

Are you able to even access fastboot when you press power and volume - ?? Also when your trying to see your device under fastboot it's fastboot devices not adb devices. You probably knew that already hehe.

Chekm8Qc said:
Are you able to even access fastboot when you press power and volume - ?? Also when your trying to see your device under fastboot it's fastboot devices not adb devices. You probably knew that already hehe.
Click to expand...
Click to collapse
/thread. THANK YOU, I knew I was doing something wrong and now everything works perfectly. Sorry for being so stupid and thanks again!

posijab said:
/thread. THANK YOU, I knew I was doing something wrong and now everything works perfectly. Sorry for being so stupid and thanks again!
Click to expand...
Click to collapse
Haha it's never stupid to ask questions no worries ?

Related

Please help - stuck on non responding rom!!

Hi everyone,
So I'm kind of new to flashing ROMs but I pretty much got it and flashed a couple of them the last couple of weeks.
Today I flashed the GPE ROM and everything was going smooth, installed successfully but then, the device won't boot up - it just showed me black sceen.
After a few minutes of non responding I forced shut down and went into fastboot, then hit recovery. I have CWM custom recovery. The device showed me the boot animation of the GPE for some reason and then won't go into recovery but showed me "type password to decrypt storage" for some reason. I couldn't go into recovery no matter what I did. Then somehow the device rebooted as usual and now it's on and running but tons of bugs and force stopping apps. IM TRYING TO GO INTO CWM RECOVERY BUT WHENEVER I CHOOSE THAT OPTION IT SIMPLY REBOOTS AGAIN.
HOW CAN I GO INTO RECOVERY AGAIN AND RESTORE MY NANDROID BACKUP? OR DO ANYTHING IN ORDER TO GET A DIFFERENT ROM?
The PC IS NOT RECOGNIZING THE DEVICE, CANT TRANSFER FILES OR RUN FASTBOOT COMMANDS!
THANKS IN ADVANCE! PLEASE HELP!! THE PHONE IS NOT FUNCTIONAL NOW
Nimi.
You don't need to type in caps to make your message more urgent. We'll still help you if don't use the caps lock.
fastboot erase cache, and re-install CWM with fastboot.
redpoint73 said:
You don't need to type in caps to make your message more urgent. We'll still help you if don't use the caps lock.
fastboot erase cache, and re-install CWM with fastboot.
Click to expand...
Click to collapse
Hey buddy,
You're right, im just anxious! As I said on the previous message, the device is not recognized on the pc so I cant seem to be able to run any kind of commands or transfer files! Any ideas? Any hard resets or stuff like that? Again, the phone is running but seems to have NO recovery at all!
Thanks!
nimrodiny said:
You're right, im just anxious! As I said on the previous message, the device is not recognized on the pc so I cant seem to be able to run any kind of commands or transfer files! Any ideas?
Click to expand...
Click to collapse
Was it able to connect to your PC before this issue started?
redpoint73 said:
Was it able to connect to your PC before this issue started?
Click to expand...
Click to collapse
OK, So I am able to recognize the device on PC and run commands but maybe im doing somehting wrong.
Can you please walk me through the exact commands I have to type in the right order? From A to Z.
THANKS!
Edit: CMD error says: "C:\Users\NIMI>fastboot flash recovery openrecovery-twrp-2.7.0.2-m8.img
error: cannot load 'openrecovery-twrp-2.7.0.2-m8.img'"
1) Make sure you have fastboot connectivity. Connect the phone in fastboot mode, and type the command: fastboot devices
2) Place the desired recovery .img in the folder where you have fastboot.exe located. Usually, the most updated version of your recovery is best.
3) In Command Prompt, change directory to your fastboot folder. I have no idea where you setup that up. But it will be something like: cd foldername
4) fastboot erase cache
5) fastboot flash recovery recovery.img
Where recovery.img is the filename of your desired recovery.
redpoint73 said:
1) Make sure you have fastboot connectivity. Connect the phone in fastboot mode, and type the command: fastboot devices
2) Place the desired recovery .img in the folder where you have fastboot.exe located. Usually, the most updated version of your recovery is best.
3) In Command Prompt, change directory to your fastboot folder. I have no idea where you setup that up. But it will be something like: cd foldername
4) fastboot erase cache
5) fastboot flash recovery recovery.img
Where recovery.img is the filename of your desired recovery.
Click to expand...
Click to collapse
Oh my goodness, It worked! Thank you so much my dear friend!!!
Saved my life pretty much.
Nimi
nimrodiny said:
Oh my goodness, It worked! Thank you so much my dear friend!!!
Click to expand...
Click to collapse
There's a button for that.
And you're very welcome. Happy to help!

my phone keeps booting into fastboot mode

hello,
after i failed to root my phone
everytime i try to put it in recovery mode it goes back to fastboot mode ..
even if i tried to flash a recovery on it , it would boot to fastboot mode
even when trying to install a official htc software update it just boots into fastboot ..
now i want to get it back to stock..
can you please help me !!
if someone would like to help me .. i can open teamviewer and he can do it for me ..
thx
zsnorow said:
hello,
after i failed to root my phone
everytime i try to put it in recovery mode it goes back to fastboot mode ..
even if i tried to flash a recovery on it , it would boot to fastboot mode
even when trying to install a official htc software update it just boots into fastboot ..
now i want to get it back to stock..
can you please help me !!
if someone would like to help me .. i can open teamviewer and he can do it for me ..
thx
Click to expand...
Click to collapse
If you are able to boot into fastboot, search the latest TWRP and flash it via adb. Connect your device while in fastboot mode and see if it recognize it.
If it does put the recovery file you have downloaded on your desktop and open a command window, press shift and right click at the same time and click on Open command window here.
Type adb devices, if you see a serial number go on and type adb reboot bootloader, then type fastboot flash recovery [ the name of the recovery file you have just downloaded ]
You can do this just by powering on your phone, no need to be already in fastboot mode, just follow the commands.
Press shift and right click : open command window here : adb devices : adb reboot bootloader : fastboot flash recovery [ the name of the recovery file you have just downloaded, do not forget the .img extension ]
fastboot reboot
Once you have a working TWRP you can flash your corresponding backup and go back to stock. The backup will be flashed from TWRP, search for instructions.
XSL-FO said:
If you are able to boot into fastboot, search the latest TWRP and flash it via adb. Connect your device while in fastboot mode and see if it recognize it.
If it does put the recovery file you have downloaded on your desktop and open a command window, press shift and right click at the same time and click on Open command window here.
Type adb devices, if you see a serial number go on and type adb reboot bootloader, then type fastboot flash recovery [ the name of the recovery file you have just downloaded ]
You can do this just by powering on your phone, no need to be already in fastboot mode, just follow the commands.
Press shift and right click : open command window here : adb devices : adb reboot bootloader : fastboot flash recovery [ the name of the recovery file you have just downloaded, do not forget the .img extension ]
fastboot reboot
Once you have a working TWRP you can flash your corresponding backup and go back to stock. The backup will be flashed from TWRP, search for instructions.
Click to expand...
Click to collapse
can you sir please give me a link for the TWRP and teach em how to flash it ? it would be much appreciated..
zsnorow said:
can you sir please give me a link for the TWRP and teach em how to flash it ? it would be much appreciated..
Click to expand...
Click to collapse
http://teamw.in/project/twrp2 and click on the upper right Get TWRP for your device.
Choose your device recovery and download the adb version. That is the .img
Once you have downloaded TWRP put it on your desktop.
Connect your device with your laptop/pc with the unknown sources checked also the usb debugging checked.
Move your mouse over a free space on your desktop, click once just to be sure there is no app or file clicked.
Then press shift and keep it pressed while you right click your mouse.
Press open command window here
in that command window type : adb devices
if you see a serial number type : adb reboot bootloader
then type : fastboot flash recovery openrecovery-twrp-2.8.1.0-m8.img
fastboot reboot
openrecovery-twrp-2.8.1.0-m8 : This is an example, you will write the name of your recovery but it should be pretty much the same.
Good luck.
Are you familiar with
adb/fastboot commands?
It's a bad idea to mess with your phone if you don't know how to repair it if something goes wrong
spinninbsod said:
It's a bad idea to mess with your phone if you don't know how to repair it if something goes wrong
Click to expand...
Click to collapse
I agree with you but maybe he has done some reading and has fixed it sense he hasn't given us an update
ive tried everything
jball said:
I agree with you but maybe he has done some reading and has fixed it sense he hasn't given us an update
Click to expand...
Click to collapse
i tried everything to fix my phone like sideloading (my phone doesent get recognised when in sideload mode) , pushing a ROM and the flashing it with TWRP (it says that its completed but it doesent work)..
what else can i do .. cant someone do it for me via teamviewer ..
zsnorow said:
i tried everything to fix my phone like sideloading (my phone doesent get recognised when in sideload mode) , pushing a ROM and the flashing it with TWRP (it says that its completed but it doesent work)..
what else can i do .. cant someone do it for me via teamviewer ..
Click to expand...
Click to collapse
What guides/tutorials have you followed to get to the point you are at now.I'm sure someone wouldn't mind teamviewing the whole process but what would you learn by having that done .
From start to finish what have you used?
i honestly cant remember everything i did
jball said:
What guides/tutorials have you followed to get to the point you are at now.I'm sure someone wouldn't mind teamviewing the whole process but what would you learn by having that done .
From start to finish what have you used?
Click to expand...
Click to collapse
i cant remember everything i did but im sure that i followed the tutorials that are on youtube/XDA/android forums correctly
zsnorow said:
i tried everything to fix my phone like sideloading (my phone doesent get recognised when in sideload mode) , pushing a ROM and the flashing it with TWRP (it says that its completed but it doesent work)..
what else can i do .. cant someone do it for me via teamviewer ..
Click to expand...
Click to collapse
You say "pushing a ROM" with what?
You don't push a ROM with TWRP you just flash it.
Or are you talking about pushing the ROM with fastboot?
If you have TWRP than download a stock backup and flash it.
Take a long look at my profile man and if you look just right you will see I've done and asked some stupid things in my travels here on XDA.I can tell you I remember every phone and ridiculous thing I've done to each of them,I still feel crunchy when I think of the mistakes.
We really need more info about the full process.please I'm not trying to offend you and I'm trying to help
zsnorow said:
i cant remember everything i did but im sure that i followed the tutorials that are on youtube/XDA/android forums correctly
Click to expand...
Click to collapse
If you can't remember what you did, or at least even try to list in detail the steps you did as best you can remember; it makes it very hard for anyone to help.
Saying you followed some tutorials on an entire website (3 websites actually) doesn't tell us jack, and isn't any better than telling us nothing.
Its not even clear the current condition of the phone. Your OP says TWRP doesn't work, then a later post says you are trying things with TWRP, so presumably you have TWRP. But since you never stated that, we can only guess.
What happens when you try to adb push or sideload? What error messages, does it make the phone reboot, stuck on boot screen, etc?
TWRP working? Bootloader is unlocked? If yes to both of those, you should be able to just adb push a ROM, or put one on removable SD with a card reader attached to your computer. Than flash the ROM in TWRP.
same thing happened with me but i remember what i did
redpoint73 said:
If you can't remember what you did, or at least even try to list in detail the steps you did as best you can remember; it makes it very hard for anyone to help.
Saying you followed some tutorials on an entire website (3 websites actually) doesn't tell us jack, and isn't any better than telling us nothing.
Its not even clear the current condition of the phone. Your OP says TWRP doesn't work, then a later post says you are trying things with TWRP, so presumably you have TWRP. But since you never stated that, we can only guess.
What happens when you try to adb push or sideload? What error messages, does it make the phone reboot, stuck on boot screen, etc?
TWRP working? Bootloader is unlocked? If yes to both of those, you should be able to just adb push a ROM, or put one on removable SD with a card reader attached to your computer. Than flash the ROM in TWRP.
Click to expand...
Click to collapse
firstly i unlocked my bootloader via htcdev website then i installed twrp recovery successfully and then when i tried to root my phone by installing two zip files (mm-su-boot. & beta super su) i installed these two files and then tried to reboot my phone it opened in fastboot mode only . then i read here about the revolution hd rom installed it successfully but it does not reboot . help needed
farhanakhtar39 said:
firstly i unlocked my bootloader via htcdev website then i installed twrp recovery successfully and then when i tried to root my phone by installing two zip files (mm-su-boot. & beta super su) i installed these two files and then tried to reboot my phone it opened in fastboot mode only . then i read here about the revolution hd rom installed it successfully but it does not reboot . help needed
Click to expand...
Click to collapse
Your device is M8 dual SIM .. mm-su-boot is for M8 single SIM, won't work on your device.
Install custom ROM with support for Dual SIM or restore your stock ROM backup
please can you provide any link of the rom for dual sim addition
farhanakhtar39 said:
please can you provide any link of the rom for dual sim addition
Click to expand...
Click to collapse
Not so sure,
if Sense ROM - https://forum.xda-developers.com/htc-one-m8/development/rom-sense-6-12-401-4-mra58k-stock-t3296066
maybe S.ROM too has dual SIM support, you need to ask in their thread
https://forum.xda-developers.com/ht...the-worlds-first100-m9-port-m8upload-t3064838
if non-Sense ROM
CM13 ROM - https://forum.xda-developers.com/htc-one-m8/development/rom-cyanogenmod-13-0-experimental-t3259068
Nougat ROM -
https://forum.xda-developers.com/showthread.php?t=2753248
https://forum.xda-developers.com/htc-one-m8/development/rom-resurrection-remix-v5-8-0-t3507210
https://forum.xda-developers.com/ht...cyanogenmod-14-1-htc-one-m8-dual-sim-t3507192
There are a few more that support Dual SIM but you have to check & ask in their development thread as I'm not familiar with most of the available custom ROMs .. I don't try most of them
Thnks
Thanks buddy it worked
cm 13 worked for me !
God bless you
If I may jump in on this post and ask some advise my m8s is only booting to fastboot screen it has never been flashed, have tried recovery: nothing just goes back to fastboot, also wiped cache and factory reset: same result..... It has done this 2 times previous but only after restarting phone, usually repeatedly doing reboot it loads but it's been 2 days now and still only getting fastboot screen...plez help
My phone is having similar issues
Stanna16 said:
If I may jump in on this post and ask some advise my m8s is only booting to fastboot screen it has never been flashed, have tried recovery: nothing just goes back to fastboot, also wiped cache and factory reset: same result..... It has done this 2 times previous but only after restarting phone, usually repeatedly doing reboot it loads but it's been 2 days now and still only getting fastboot screen...plez help
Click to expand...
Click to collapse
I recently decided to root and install a custom rom on my old stock sprint HTC one m8. I unlocked the boot loader via HTC Dev website. I then flashed the TWRP recovery. Since doing the latter step, it's been booting into fast boot all the time! Did you ever figure out what was wrong with your phone?
pancho2009 said:
I recently decided to root and install a custom rom on my old stock sprint HTC one m8. I unlocked the boot loader via HTC Dev website. I then flashed the TWRP recovery. Since doing the latter step, it's been booting into fast boot all the time! Did you ever figure out what was wrong with your phone?
Click to expand...
Click to collapse
You only flashed TWRP onto the phone? Or did you root also?
Not nearly enough info to provide the proper help.
Please do fastboot getvar all, and post the results (delete IMEI and serial number before posting).
What version TWRP?
What version SuperSU did you flash (if you got that far)?

[Q] help for root

Hi guys,
I have already read dozens of pages regarding the procedure to root my new Htc M8 but I am still a bit confused.
In the picture attached you can see the status of my phone, I think the previous owner has already unlocked it .
What I am kindly ask you is to help me to find the next step to root the phone. I suppose that I have to download a TWRP file, copy it to the internal memory of the phone and then chose "Recovery" but I'm not sure and I don't want to make a disaster !!!
Can U help me? I'm on Mac.
thanks
ciao
fausto
now flash any custom recovery and then flash supersu.zip from recovery to make your handset root
fcasini said:
I suppose that I have to download a TWRP file, copy it to the internal memory of the phone and then chose "Recovery"
Click to expand...
Click to collapse
That is not the proper way to install TWRP, and I don't know how you got that notion.
The proper way to install TWRP is described on the TWRP website (see under "Fastboot Install Method"): https://twrp.me/devices/htconem8gsm.html
fcasini said:
Hi guys,
I have already read dozens of pages regarding the procedure to root my new Htc M8 but I am still a bit confused.
In the picture attached you can see the status of my phone, I think the previous owner has already unlocked it .
What I am kindly ask you is to help me to find the next step to root the phone. I suppose that I have to download a TWRP file, copy it to the internal memory of the phone and then chose "Recovery" but I'm not sure and I don't want to make a disaster !!!
Can U help me? I'm on Mac.
thanks
ciao
your lucky to have s-off already phone lol, install TWRP via fastboot command then flash supersu in TWRP
Click to expand...
Click to collapse
ok, thanks to all,
now I have downloaded the TWRP.IMG, adb and Fastboot files and I am approaching to connect my phone to mac, open terminal and then
./adb reboot bootloader
./fastboot twrp.img
SuperSU is already installed on the phone, so I think I don't need to download and install again.
Is it right?
Once Flashed the twrp image, phone will be wiped?
Thank you again, you help and patience is very appreciated
ciao
fausto
fcasini said:
SuperSU is already installed on the phone, so I think I don't need to download and install again.
Is it right?
Click to expand...
Click to collapse
Did you check to see if the phone was still rooted? It was clearly modded by the previous owner, so may still be rooted. You can check with one of the root checker apps; or simply any app that requires root (such as Titanium Backup).
Although its also possible they unrooted and left the SuperSU app still installed. Just having the app installed does not in itself give you root, the binary also has to be installed. So if that is the case (no root) then UES you will still need to download the current version SuperSU and flash in TWRP in order to gain root.
fcasini said:
Once Flashed the twrp image, phone will be wiped?
Click to expand...
Click to collapse
Nope, TWRP just overwrites the recovery partition. Completely separate partition from user data, ROM, etc.
Regardless, I still highly recommend you backup any personal data that is important to you (preferably backup to an off-phone location) before doing any mods, just in case something goes wrong.
Hi Redpoint73, thanks for the useful info.
I am pretty sure that it is unrooted. I unsuccessfully tried to install Titanium Backup and also the SuperSu application don't start because of the missing of root permission.
Then If I have understood your suggestions:
1) connect the phone with debug Usb ON
2) type ./fastboot twrp.img
3) Phone off
4) Power+Vol-
5) Fastboot menu
6) Recovery+Power
Is it right?
And then? What's happen after? The phone will reboot himself?
thanks
ciao
My comments below in red font:
fcasini said:
Then If I have understood your suggestions:
1) connect the phone with debug Usb ON Doesn't matter if Debugging is on, this only enables adb commands. Fastboot commands work regardless of debugging on or not. But Debugging on is good to have in other situations (so I usually leave it on).
2) type ./fastboot twrp.img Don't know where you got this syntax from. Its not correct. The command given on the link I gave previously (Post #3) states: fastboot flash recovery twrp.img
If the syntax is not exactly right, the command will fail or perform the wrong action. Also note that the TWRP img filename in the command needs to match the actual TWRP file you with to flash. You will notice when you download the TWRP file, the file name is actually much longer than just "twrp.img". So you can either type that whole filename exactly, or change the name of the file to actually be "twrp.img" (with no quotes)
3) Phone off
4) Power+Vol-
5) Fastboot menu
6) Recovery+Power
Click to expand...
Click to collapse
At some point before Step 6, you need to put the SuperSU zip on the phone. You can download it direct to your phone from here: https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip
After step 6 (boot into TWRP) select "Install" from the main menu. Navigate to the SuperSU zip, then select it. Once its flashed, reboot. You should be rooted and good to go.
redpoint73 said:
My comments below in red font:
fastboot flash recovery twrp.img.
Click to expand...
Click to collapse
redpoint73, I need your precious help
I have connected my phone to the Mac but with the command "./fastboot flash recovery twrp.img" I get the message "Permission denied".
Even with other command like ./reboot or ./adb devices...
What is going wrong? Maybe I've missed something?
I followed also the instruction here https://www.youtube.com/watch?v=WOW38u-02I0 but without luck...
Help!!!
ciao
fausto
fcasini said:
redpoint73, I need your precious help
I have connected my phone to the Mac but with the command "./fastboot flash recovery twrp.img" I get the message "Permission denied".
Even with other command like ./reboot or ./adb devices...
What is going wrong? Maybe I've missed something?
Click to expand...
Click to collapse
I don't know anything about Mac's, so I probably will be of limited help in that regard.
Did you install the Android SDK, or other Mac friendly adb-fastboot environment?
it is really strange...
I have installed both Adb and fastboot but whenever I try to flash the image file I get the same error: Permission denied.
With Mac there is no need of driver to work and I don't know ho to proceed.
Thank you redpoint73, your help has been very appreciated, I will search again on the net to solve the problem.
Have a nice day
ciao
fausto
fcasini said:
it is really strange...
I have installed both Adb and fastboot but whenever I try to flash the image file I get the same error: Permission denied.
Click to expand...
Click to collapse
Make sure you are running fastboot command while the phone is in bootloader-fastboot mode. Run adb command while booted into OS (and Debugging needs to be enabled in Settings).
You are in the correct directory (where your fastboot and adb executables are located) when running the commands?
Try finding a thread specific to running adb/fastboot on a Mac (probably doesn't need to be M8 specific) and reading up or post a link to this thread. This may be some Mac-specific nuance that I am not knowledgeable in.
thanks again dear redpoint73,
I checked again and It seems to be all right but it doesn't work.
I have just one doubt yet. Perhaps I have to flash a root file like this http://www.androidrevolution.org/do...le=Android_Revolution_HD_Root_and_BusyBox.zip and then supersu.img through recovery menu?
Could it be the way to gain the permission?
thanks
ciao

Help I bricked my Oneplus 3

Hi, i played around with my new OP3, and i wanted to root it. Since i'm noob at rooting, it went wrong. (i did it with twrp)
So first it just went in to bootloop, then i was still able to get to rcovery and stuff, but i followed a guide to fix bootloop, and that ****ed it even more up. The guide i followedet told me to use "OnePlus3_Unbrick_Tool"
After using "OnePlus3_Unbrick_Tool", i now cant even go into recovery anymore, the only thing i can do is go to bootloader, but when i'm in bootloader now, it wont connect proberly, so that i can use "flash twrp", so that i can use twrp recovery.
Also when i try to boot it, it because of "OnePlus3_Unbrick_Tool" goes into something, where it says "md5 checksum failed", and then restarts and does it again and again.....
I hope it's not bricked forever, pls help ))
have you tried re-flashing the stock or twrp recovery with adb sideload command?
if not give it a shot, it might work.
bonham1988 said:
have you tried re-flashing the stock or twrp recovery adb sideload command?
Click to expand...
Click to collapse
And how do you say I do that? I have tried using the "tool all in one", where you han flash both stock and twrp, but it doesnt seem to do anything, when i press them (and the device is in bootloader)
Godeske said:
And how do you say I do that? I have tried using the "tool all in one", where you han flash both stock and twrp, but it doesnt seem to do anything, when i press them (and the device is in bootloader)
Click to expand...
Click to collapse
Just boot into bootloader mode and through command prompt check if your phone is detected by typing fastboot devices. If its detected then you flash a new recovery again. Forget the toolkit, just look for instructions on how to install a custom recovery.
Sent from my OnePlus3 using XDA Labs
bonham1988 said:
Just boot into bootloader mode and through command prompt check if your phone is detected by typing fastboot devices. If its detected then you flash a new recovery again. Forget the toolkit, just look for instructions on how to install a custom recovery.
Sent from my OnePlus3 using XDA Labs
Click to expand...
Click to collapse
Okay i've tried that now, and it wont allow me unlock my bootloader from command prompt, and i cant do the flash while it's locked.. what to do?
Godeske said:
Okay i've tried that now, and it wont allow me unlock my bootloader from command prompt, and i cant do the flash while it's locked.. what to do?
Click to expand...
Click to collapse
In fastboot mode, did you manage to find your device on the computer? On Linux this is "sudo fastboot devices", on Windows it should be roughly similar.
simthadim said:
In fastboot mode, did you manage to find your device on the computer? On Linux this is "sudo fastboot devices", on Windows it should be roughly similar.
Click to expand...
Click to collapse
When im in fastboot mode in the bootloader, i can only find it in "device manager" as "marshall london device -> marshall london bootloader interface"
Godeske said:
When im in fastboot mode in the bootloader, i can only find it in "device manager" as "marshall london device -> marshall london bootloader interface"
Click to expand...
Click to collapse
Might seem a silly question but what phone are you using? If it is a OnePlus3 have you installed the correct drivers?
ghostofcain said:
Might seem a silly question but what phone are you using? If it is a OnePlus3 have you installed the correct drivers?
Click to expand...
Click to collapse
Pretty sure i have, but i have booked a session with oneplus costumer service now, so that they do it for me live lololol
bonham1988 said:
have you tried re-flashing the stock or twrp recovery with adb sideload command?
if not give it a shot, it might work.
Click to expand...
Click to collapse
Hey bonham,
The same thing happened to me but when I try to sideload it says I need 1.0.32 or higher to sideload this device
What should I do?
gavintoronto2016 said:
Hey bonham,
The same thing happened to me but when I try to sideload it says I need 1.0.32 or higher to sideload this device
What should I do?
Click to expand...
Click to collapse
Adb version is outdated. Just download the latest ones.
Sent from my OnePlus3 using XDA Labs
Hey guys, if there are some of you, who knows a lot about this, would you like to answer this comment? Idk maybe we could use teamviewer to help me or something
simthadim said:
In fastboot mode, did you manage to find your device on the computer? On Linux this is "sudo fastboot devices", on Windows it should be roughly similar.
Click to expand...
Click to collapse
Ohh i think i understand your question. YEs in command prompt I am able to find the device, it is connected.
(do you know a lot about this, maybe you could teamview me to help?))
Godeske said:
Ohh i think i understand your question. YEs in command prompt I am able to find the device, it is connected.
(do you know a lot about this, maybe you could teamview me to help?))
Click to expand...
Click to collapse
Hey!
I'm not the expert but I have played with my 1+3 enough to have some knowledge.
First of all, do not use "all in one tools", those do not put you in control.
Cool, so fastboot is detected, though you can't get into the recovery?
Step 1) make sure you have the latest version of "fastboot" and "adb" (Android Debug Bridge) and unlock the bootloader. This tread should be helpfull: http://forum.xda-developers.com/oneplus-3/how-to/oneplus-3-how-to-unlock-bootloader-t3398733
You need to do this, because otherwise we will not be able to proceed (i.e. the phone is to be 'unlocked' for what we are about to do).
Step 2) If you are ready than let's flash a new recovery (TWRP):
This is also step 2 in the thread mentioned above. Very important: "Once the flash has completed, Don't use the "Fastboot Reboot" Command Instead Unplug Your phone then Manually boot it into recovery by keeping Power + Volume Down button pressed."
So once you have flashed a new recovery using fastboot, than you should reboot your phone into the new recovery!
step 3)
Once in the new recovery (TWRP) go to advanced and to ADB sideload. Make sure your computer detects your device with the command "adb devices" and flash a new ROM. Just for simplicity use the official OOS 3.2.4.
This should do the trick. Before you go and try make sure you understand EVERYTHING I have written. Let me know if you have questions.
simthadim said:
Hey!
I'm not the expert but I have played with my 1+3 enough to have some knowledge.
First of all, do not use "all in one tools", those do not put you in control.
Cool, so fastboot is detected, though you can't get into the recovery?
Step 1) make sure you have the latest version of "fastboot" and "adb" (Android Debug Bridge) and unlock the bootloader. This tread should be helpfull: http://forum.xda-developers.com/oneplus-3/how-to/oneplus-3-how-to-unlock-bootloader-t3398733
You need to do this, because otherwise we will not be able to proceed (i.e. the phone is to be 'unlocked' for what we are about to do).
Step 2) If you are ready than let's flash a new recovery (TWRP):
This is also step 2 in the thread mentioned above. Very important: "Once the flash has completed, Don't use the "Fastboot Reboot" Command Instead Unplug Your phone then Manually boot it into recovery by keeping Power + Volume Down button pressed."
So once you have flashed a new recovery using fastboot, than you should reboot your phone into the new recovery!
step 3)
Once in the new recovery (TWRP) go to advanced and to ADB sideload. Make sure your computer detects your device with the command "adb devices" and flash a new ROM. Just for simplicity use the official OOS 3.2.4.
This should do the trick. Before you go and try make sure you understand EVERYTHING I have written. Let me know if you have questions.
Click to expand...
Click to collapse
Thank you, but i have not enabled "allow oem unlocking" in the developer settings when the phone worked, so i get a error message "FAILED (remote: oem unloc is not allowed)
What to do to unlock it then?
Bro, download 3.2.4 oos rom zip file from official link. Its around 1.3 GB. Just connect ur OP3 to computer. It will detect as MTP device.Im my computer it was in the name of RAIN Transfer the zip file to internal storage. Wipe cache. And select install option in TWRP and select the zip file u pushed and flash it. Best of luck..
jaganmohans said:
Bro, download 3.2.4 oos rom zip file from official link. Its around 1.3 GB. Just connect ur OP3 to computer. It will detect as MTP device.Im my computer it was in the name of RAIN Transfer the zip file to internal storage. Wipe cache. And select install option in TWRP and select the zip file u pushed and flash it. Best of luck..
Click to expand...
Click to collapse
Bro, if just it were that simple, but it's not.. It doesn't find the phone in my computer...
simthadim said:
Hey!
I'm not the expert but I have played with my 1+3 enough to have some knowledge.
First of all, do not use "all in one tools", those do not put you in control.
Cool, so fastboot is detected, though you can't get into the recovery?
Step 1) make sure you have the latest version of "fastboot" and "adb" (Android Debug Bridge) and unlock the bootloader. This tread should be helpfull: http://forum.xda-developers.com/oneplus-3/how-to/oneplus-3-how-to-unlock-bootloader-t3398733
You need to do this, because otherwise we will not be able to proceed (i.e. the phone is to be 'unlocked' for what we are about to do).
Step 2) If you are ready than let's flash a new recovery (TWRP):
This is also step 2 in the thread mentioned above. Very important: "Once the flash has completed, Don't use the "Fastboot Reboot" Command Instead Unplug Your phone then Manually boot it into recovery by keeping Power + Volume Down button pressed."
So once you have flashed a new recovery using fastboot, than you should reboot your phone into the new recovery!
step 3)
Once in the new recovery (TWRP) go to advanced and to ADB sideload. Make sure your computer detects your device with the command "adb devices" and flash a new ROM. Just for simplicity use the official OOS 3.2.4.
This should do the trick. Before you go and try make sure you understand EVERYTHING I have written. Let me know if you have questions.
Click to expand...
Click to collapse
Hey i have the same problem but this fix does not work for me.
So I have the bootloader unlocked and I can enter the bootload and my computer detects my device which is nice.
when I flash twrp on my phone trough CMD it doesnt work, my PC tells me that everything is okay but my phone will not boot into twrp and instead it will give me weird errors.
---------- Post added at 03:31 PM ---------- Previous post was at 02:56 PM ----------
this fix worked for me,
On the screen when the phone failed to md5 checksum, you've got several partition failed right? in red text.
- download this : https://www.androidfilehost.com/?fid=24591000424942573
and then extract.
- download platform tools attached below. extract in the same folder with first file you've downloaded.
- Boot your phone to fastboot mode, plug your usb, make sure adb and fastboot driver are installed.
- on the folder, hold shift and right click, click open command here
- type fastboot devices
- make sure your serial number appear.
- now flash the img of the missing file according to the partition in red text on your ms5 checksum failed one by one.
- e.g. "fastboot flash boot_aging boot_aging.img.
- make sure you flash all the missing partition.
- type fastboot reboot.
this will boot you to oos 3.1.2.
unfortunately I couldn't extract the newest oos dat. data. but you could always take the OTA
goodluck mate. sorry for my english
Godeske said:
Bro, if just it were that simple, but it's not.. It doesn't find the phone in my computer...
Click to expand...
Click to collapse
Hmm bad try installing all op3 drivers and see whether phone is detected or not. I was in the same situation previously. Pushing zip through adp terminal is painful process. I got device offline first,after solving that i got service not recognized issue. For solving that usb debugging needs to be enabled i stuck in that step.
can you enter recovery trough fastboot mode? I.e. if you are in fastboot mode you van use the volume keys to select recovery.
100% sure you can't enter recovery?
you can try Fast and pro's option. let us know!

Oneplus 3 Boot Loop

So I tried to flash another rom by flashing TWRP and unlocking the bootloader, which worked and I then had installed Freedom Os. Then I locked the Bootloader to get the Message away, but know when you charge it or turn it on it is in an boot loop which repeats the Oneplus Logo what you normally see, but very short and after that it bobrates turns the screen off and it atart again. Or I can go into fastboot mode, but when I try to go into the recovery, it goes into the Boot Loop again. Is there a way to get the Original OS back? Ive already dopwnloaded it but I cant get in on there. Can you tell me how to fix it on my own?
[GUIDE] Mega Unbrick Guide for A Hard Bricked OnePlus 3 > METHOD 1
If you can access fastboot mode, connect the phone to a PC, then go to ADB and erase recovery using the command " fastboot erase recovery" and install TWRP 3.0.4-1 using the command " <fastboot flash recovery <recovery.zip/img> again.
Once you do that, boot into TWRP, go to wipe and wipe everything. Once you do that, transfer the stock OOS into the internal memory using copy-paste , then go to install , select the transferred file to install the OS or else go to advance setting in TWRP and select adb sideload and use the command "adb sideload <filename.zip>".
This should install the OS on the phone.
If you want to go complete stock, then you also need to install the stock recovery. Search the forum to get the relevent files or else you can download it from the OnePlus website and later on update to latest OS via OTA.
NEVER EVER LOCK THE BOOTLOADER , IF YOU'RE USING ANY ROM OTHER THAN STOCK OS AND STOCK RECOVERY
anup807 said:
If you can access fastboot mode, connect the phone to a PC, then go to ADB and erase recovery using the command " fastboot erase recovery" and install TWRP 3.0.4-1 using the command " <fastboot flash recovery <recovery.zip/img> again.
Once you do that, boot into TWRP, go to wipe and wipe everything. Once you do that, transfer the stock OOS into the internal memory using copy-paste , then go to install , select the transferred file to install the OS or else go to advance setting in TWRP and select adb sideload and use the command "adb sideload <filename.zip>".
This should install the OS on the phone.
If you want to go complete stock, then you also need to install the stock recovery. Search the forum to get the relevent files or else you can download it from the OnePlus website and later on update to latest OS via OTA.
NEVER EVER LOCK THE BOOTLOADER , IF YOU'RE USING ANY ROM OTHER THAN STOCK OS AND STOCK RECOVERY
Click to expand...
Click to collapse
Can you tell me how to go to adb? When doing it while being in fastboot I get the error "remote: Partition erase is not allowed"
revedar said:
Can you tell me how to go to adb? When doing it while being in fastboot I get the error "remote: Partition erase is not allowed"
Click to expand...
Click to collapse
Download Universal ADB software, download the latest version and install it.
TWRP 3.0.4-1
Official Oxygen OS 4.0.3
Official Recovery
Connect your phone to the PC and then navigate to installed folder, right click holding SHIFT key and select "Open command window here"
Inside command window type
adb devices
If all the drivers are installed properly, you should see you're device ID here.
then type
adb reboot bootloader
your phone will enter fastboot mode.
then type
fastboot devices
again you should see you're device ID here.
then follow the instruction , i've given earlier.
anup807 said:
Download Universal ADB software, download the latest version and install it.
TWRP 3.0.4-1
Official Oxygen OS 4.0.3
Official Recovery
Connect your phone to the PC and then navigate to installed folder, right click holding SHIFT key and select "Open command window here"
Inside command window type
adb devices
If all the drivers are installed properly, you should see you're device ID here.
then type
adb reboot bootloader
your phone will enter fastboot mode.
then type
fastboot devices
again you should see you're device ID here.
then follow the instruction , i've given earlier.
Click to expand...
Click to collapse
So i've downloaded the software, installed the driver and typed in cmd adb devices "adb devices List of devices attached" is returned, so it seems like there is going something wrong. Is it because the Driver is installed wrong or because "target reported max download size of 440401920 bytes
sending 'recovery' (22605 KB)...
OKAY [ 0.528s]
writing 'recovery'...
FAILED (remote: Partition flashing is not allowed)
finished. total time: 0.551s"
This is returned when trying to flash. Do I have to be in fastboot mode or something else to be able to follow your instructions? In Fast Boot is written that the Device State is locked and Secure Boot is enabled. I messaged Oneplus and hope they have a solution which can just unlock the Bootloader when being in fastboot mode, so everything is fine again. I hope you can help me, but I still wanna say thank your for now
Errr... fastboot can unlock the bootloader. fastboot oem unlock
emuandco said:
Errr... fastboot can unlock the bootloader. fastboot oem unlock
Click to expand...
Click to collapse
Thank you, but it dont works because i forgot to re-enable the oem modification and usb debugging in freedom os, maybe there is an option to do this without having this enabled but I didnt found it. So I wait for a helpful answer from somebody here or from Oneplus, I consider sending my smartphone to oneplus to let them repair it if I cant do it. Just saying that modding an S3, Asus transformer pad and nvidia shield is way easier.
never ever relock your bootloader while you in custom OS
oopstairs said:
never ever relock your bootloader while you in custom OS
Click to expand...
Click to collapse
Thank you for not helping me
revedar said:
Thank you for not helping me
Click to expand...
Click to collapse
Yeah I'm sorry I can't help you in your case. I'm just stating the fact. Sorry if I offended you.
Shouldn't it still be possible to reflash the properly signed official updates? TBH I never had such a problem and thus never had to cope with it. Same with recovery: http://oxygenos.oneplus.net.s3.amazonaws.com/recovery_op3.img Try flashing this one with fastboot. It's the official one. By flashing this one you might fix your stuff over adb sideloading the official full update zips.
Try the unbrick guide provided in the 2nd post to your query. It should definitely help. Better contact OnePlus tech2 support and they'll flash your phone for you. They're really helpful.
emuandco said:
Shouldn't it still be possible to reflash the properly signed official updates? TBH I never had such a problem and thus never had to cope with it. Same with recovery: http://oxygenos.oneplus.net.s3.amazonaws.com/recovery_op3.img Try flashing this one with fastboot. It's the official one. By flashing this one you might fix your stuff over adb sideloading the official full update zips.
Click to expand...
Click to collapse
I already tried to do this, but the console returns something like permission denied.
anup807 said:
Try the unbrick guide provided in the 2nd post to your query. It should definitely help. Better contact OnePlus tech2 support and they'll flash your phone for you. They're really helpful.
Click to expand...
Click to collapse
The MSM Software disconnects the smartphone while the process works
U cannot flash in adb while the bootloader is locked, u can not unlock the bootloader unless u can access ur OS, I am not sure y people was trying to get u to flash via fastboot the answer was provided to u in the 2nd post
^^^ This!
It's pretty much obvious fastboot flash will not work with a locked bootloader.
It's pretty obvious unlocking the bootloader will not work, while one can not access the OS.
Unbrick tool is the only option to bring it back to life, or sending it for RMA. If unbrick tool fails, try using different drivers and make sure it is connected with the stock cable (I've only tried with a Nilkin cable besides the stock one, which always failed at different stages during the process).
Not even sure drivers must be installed manually, I've never done that myself on Windows 10, as they were automatically installed (3 different's PC's, both on x86 and x64).
Which version of stock firmware did you last have? If it was 4.0.1 or earlier, then you can use
Code:
fastboot oem 4F500301
to issue a flash command even without unlocking the bootloader. If you are on that, then use that command and flash stock recovery and then flash stock zip.
rk2612 said:
Which version of stock firmware did you last have? If it was 4.0.1 or earlier, then you can use
Code:
fastboot oem 4F500301
to issue a flash command even without unlocking the bootloader. If you are on that, then use that command and flash stock recovery and then flash stock zip.
Click to expand...
Click to collapse
I had the most recent update installed. Is there a similar command at the moment?
revedar said:
I had the most recent update installed. Is there a similar command at the moment?
Click to expand...
Click to collapse
Don't think so.

Categories

Resources