So I tried to flash another rom by flashing TWRP and unlocking the bootloader, which worked and I then had installed Freedom Os. Then I locked the Bootloader to get the Message away, but know when you charge it or turn it on it is in an boot loop which repeats the Oneplus Logo what you normally see, but very short and after that it bobrates turns the screen off and it atart again. Or I can go into fastboot mode, but when I try to go into the recovery, it goes into the Boot Loop again. Is there a way to get the Original OS back? Ive already dopwnloaded it but I cant get in on there. Can you tell me how to fix it on my own?
[GUIDE] Mega Unbrick Guide for A Hard Bricked OnePlus 3 > METHOD 1
If you can access fastboot mode, connect the phone to a PC, then go to ADB and erase recovery using the command " fastboot erase recovery" and install TWRP 3.0.4-1 using the command " <fastboot flash recovery <recovery.zip/img> again.
Once you do that, boot into TWRP, go to wipe and wipe everything. Once you do that, transfer the stock OOS into the internal memory using copy-paste , then go to install , select the transferred file to install the OS or else go to advance setting in TWRP and select adb sideload and use the command "adb sideload <filename.zip>".
This should install the OS on the phone.
If you want to go complete stock, then you also need to install the stock recovery. Search the forum to get the relevent files or else you can download it from the OnePlus website and later on update to latest OS via OTA.
NEVER EVER LOCK THE BOOTLOADER , IF YOU'RE USING ANY ROM OTHER THAN STOCK OS AND STOCK RECOVERY
anup807 said:
If you can access fastboot mode, connect the phone to a PC, then go to ADB and erase recovery using the command " fastboot erase recovery" and install TWRP 3.0.4-1 using the command " <fastboot flash recovery <recovery.zip/img> again.
Once you do that, boot into TWRP, go to wipe and wipe everything. Once you do that, transfer the stock OOS into the internal memory using copy-paste , then go to install , select the transferred file to install the OS or else go to advance setting in TWRP and select adb sideload and use the command "adb sideload <filename.zip>".
This should install the OS on the phone.
If you want to go complete stock, then you also need to install the stock recovery. Search the forum to get the relevent files or else you can download it from the OnePlus website and later on update to latest OS via OTA.
NEVER EVER LOCK THE BOOTLOADER , IF YOU'RE USING ANY ROM OTHER THAN STOCK OS AND STOCK RECOVERY
Click to expand...
Click to collapse
Can you tell me how to go to adb? When doing it while being in fastboot I get the error "remote: Partition erase is not allowed"
revedar said:
Can you tell me how to go to adb? When doing it while being in fastboot I get the error "remote: Partition erase is not allowed"
Click to expand...
Click to collapse
Download Universal ADB software, download the latest version and install it.
TWRP 3.0.4-1
Official Oxygen OS 4.0.3
Official Recovery
Connect your phone to the PC and then navigate to installed folder, right click holding SHIFT key and select "Open command window here"
Inside command window type
adb devices
If all the drivers are installed properly, you should see you're device ID here.
then type
adb reboot bootloader
your phone will enter fastboot mode.
then type
fastboot devices
again you should see you're device ID here.
then follow the instruction , i've given earlier.
anup807 said:
Download Universal ADB software, download the latest version and install it.
TWRP 3.0.4-1
Official Oxygen OS 4.0.3
Official Recovery
Connect your phone to the PC and then navigate to installed folder, right click holding SHIFT key and select "Open command window here"
Inside command window type
adb devices
If all the drivers are installed properly, you should see you're device ID here.
then type
adb reboot bootloader
your phone will enter fastboot mode.
then type
fastboot devices
again you should see you're device ID here.
then follow the instruction , i've given earlier.
Click to expand...
Click to collapse
So i've downloaded the software, installed the driver and typed in cmd adb devices "adb devices List of devices attached" is returned, so it seems like there is going something wrong. Is it because the Driver is installed wrong or because "target reported max download size of 440401920 bytes
sending 'recovery' (22605 KB)...
OKAY [ 0.528s]
writing 'recovery'...
FAILED (remote: Partition flashing is not allowed)
finished. total time: 0.551s"
This is returned when trying to flash. Do I have to be in fastboot mode or something else to be able to follow your instructions? In Fast Boot is written that the Device State is locked and Secure Boot is enabled. I messaged Oneplus and hope they have a solution which can just unlock the Bootloader when being in fastboot mode, so everything is fine again. I hope you can help me, but I still wanna say thank your for now
Errr... fastboot can unlock the bootloader. fastboot oem unlock
emuandco said:
Errr... fastboot can unlock the bootloader. fastboot oem unlock
Click to expand...
Click to collapse
Thank you, but it dont works because i forgot to re-enable the oem modification and usb debugging in freedom os, maybe there is an option to do this without having this enabled but I didnt found it. So I wait for a helpful answer from somebody here or from Oneplus, I consider sending my smartphone to oneplus to let them repair it if I cant do it. Just saying that modding an S3, Asus transformer pad and nvidia shield is way easier.
never ever relock your bootloader while you in custom OS
oopstairs said:
never ever relock your bootloader while you in custom OS
Click to expand...
Click to collapse
Thank you for not helping me
revedar said:
Thank you for not helping me
Click to expand...
Click to collapse
Yeah I'm sorry I can't help you in your case. I'm just stating the fact. Sorry if I offended you.
Shouldn't it still be possible to reflash the properly signed official updates? TBH I never had such a problem and thus never had to cope with it. Same with recovery: http://oxygenos.oneplus.net.s3.amazonaws.com/recovery_op3.img Try flashing this one with fastboot. It's the official one. By flashing this one you might fix your stuff over adb sideloading the official full update zips.
Try the unbrick guide provided in the 2nd post to your query. It should definitely help. Better contact OnePlus tech2 support and they'll flash your phone for you. They're really helpful.
emuandco said:
Shouldn't it still be possible to reflash the properly signed official updates? TBH I never had such a problem and thus never had to cope with it. Same with recovery: http://oxygenos.oneplus.net.s3.amazonaws.com/recovery_op3.img Try flashing this one with fastboot. It's the official one. By flashing this one you might fix your stuff over adb sideloading the official full update zips.
Click to expand...
Click to collapse
I already tried to do this, but the console returns something like permission denied.
anup807 said:
Try the unbrick guide provided in the 2nd post to your query. It should definitely help. Better contact OnePlus tech2 support and they'll flash your phone for you. They're really helpful.
Click to expand...
Click to collapse
The MSM Software disconnects the smartphone while the process works
U cannot flash in adb while the bootloader is locked, u can not unlock the bootloader unless u can access ur OS, I am not sure y people was trying to get u to flash via fastboot the answer was provided to u in the 2nd post
^^^ This!
It's pretty much obvious fastboot flash will not work with a locked bootloader.
It's pretty obvious unlocking the bootloader will not work, while one can not access the OS.
Unbrick tool is the only option to bring it back to life, or sending it for RMA. If unbrick tool fails, try using different drivers and make sure it is connected with the stock cable (I've only tried with a Nilkin cable besides the stock one, which always failed at different stages during the process).
Not even sure drivers must be installed manually, I've never done that myself on Windows 10, as they were automatically installed (3 different's PC's, both on x86 and x64).
Which version of stock firmware did you last have? If it was 4.0.1 or earlier, then you can use
Code:
fastboot oem 4F500301
to issue a flash command even without unlocking the bootloader. If you are on that, then use that command and flash stock recovery and then flash stock zip.
rk2612 said:
Which version of stock firmware did you last have? If it was 4.0.1 or earlier, then you can use
Code:
fastboot oem 4F500301
to issue a flash command even without unlocking the bootloader. If you are on that, then use that command and flash stock recovery and then flash stock zip.
Click to expand...
Click to collapse
I had the most recent update installed. Is there a similar command at the moment?
revedar said:
I had the most recent update installed. Is there a similar command at the moment?
Click to expand...
Click to collapse
Don't think so.
Related
Hey there
I want to start off by saying I have very little experience with rooting, but am very familiar with jailbreaking apple devices so I figured i could manage.
I have a htc one m8 on rogers network locked. I rooted it and had super user and all that jazz, then flashed AOKP. Then I thought i actually liked the stock HTC sense better, so I tried to "get things back to normal"...lol.
Now im at the point where if i turn my phone on it goes straight to the fastboot screen(?) with all the "fast boot, recovery, factory reset, etc". Since I'm super new to all of this is there anybody that can write some instructions on how to get my phone back to stock? I would really appreciate it after panicking over this for 3 days.
Edit: In the fastboot screen at the top it says ***Tampered*** ***Relocked*** ***security warning**
also when i try to press recovery it shows the htc screen for 1 second then back to the same menu
i found this http://forum.xda-developers.com/showthread.php?t=2710735 but i cannot even get into recovery
haydenrbm said:
Hey there
I want to start off by saying I have very little experience with rooting, but am very familiar with jailbreaking apple devices so I figured i could manage.
I have a htc one m8 on rogers network locked. I rooted it and had super user and all that jazz, then flashed AOKP. Then I thought i actually liked the stock HTC sense better, so I tried to "get things back to normal"...lol.
Now im at the point where if i turn my phone on it goes straight to the fastboot screen(?) with all the "fast boot, recovery, factory reset, etc". Since I'm super new to all of this is there anybody that can write some instructions on how to get my phone back to stock? I would really appreciate it after panicking over this for 3 days.
Click to expand...
Click to collapse
While being an expert with rooting and flashing custom recoveries on Samsung devices, I am also new to the world of HTC. Out of curiosity, what happens when you hit factory reset?
Unlock the boot loader again then install twrp recovery then head over to the stock backup thread and flash one of the nandroids for your cid.
MattMJB0188 said:
While being an expert with rooting and flashing custom recoveries on Samsung devices, I am also new to the world of HTC. Out of curiosity, what happens when you hit factory reset?
Click to expand...
Click to collapse
When i hit factory reset it the screen changes to the HTC in green for 1 second then back to where i started
ashyx said:
Unlock the boot loader again then install twrp recovery then head over to the stock backup thread and flash one of the nandroids for your cid.
Click to expand...
Click to collapse
I would...but when im trying to use ADB devices it isn't found
haydenrbm said:
When i hit factory reset it the screen changes to the HTC in green for 1 second then back to where i started
I would...but when im trying to use ADB devices it isn't found
Click to expand...
Click to collapse
Do fastboot devices ... adb commands itself won't work in bootloader, it has to be fastboot commands.
now you have a locked bootloader which means you cant do anything.. so your first step is to unlock it again then flash a custom recovery (TWRP) after that flash the stock rom+ boot.img ( to be safe) make sure it boots. RELOCK the bootloader then flash your firmware.zip.. hope it helps
mushages said:
now you have a locked bootloader which means you cant do anything.. so your first step is to unlock it again then flash a custom recovery (TWRP) after that flash the stock rom+ boot.img ( to be safe) make sure it boots. RELOCK the bootloader then flash your firmware.zip.. hope it helps
Click to expand...
Click to collapse
How can I unlock the bootloader again without the device showing in adb?
haydenrbm said:
How can I unlock the bootloader again without the device showing in adb?
Click to expand...
Click to collapse
i think you have your unlock token. start from here
http://www.htcdev.com/bootloader/unlock-instructions/page-4/
haydenrbm said:
How can I unlock the bootloader again without the device showing in adb?
Click to expand...
Click to collapse
If it's in bootloader it should show in command prompt when you type fastboot devices after connecting it to PC. If it doesn't then there is a driver problem perhaps. Check to make sure you have HTC drivers installed, or reinstall them. Might as well make sure adb is up to date as well, can do that through the Android SDK Manager. Another possibility might be that the usb cable isn't working correctly, try another cable. Fact of the matter though is, if it's in bootloader and you connect it to the PC adb/fastboot SHOULD pick it up.
So check and fix those things. Also make sure you use the correct commands, in bootloader mode, it'll be fastboot commands, not "adb devices" but "fastboot devices" ... "fastboot reboot" etc etc. Also make sure you're running the commands from within the adb/fastboot folder path(just for in case yeah...)
mushages said:
i think you have your unlock token. start from here
Click to expand...
Click to collapse
Okay it is unlocked, but now it just stays on the AOKP boot screen
Thank you for the help btw, it must be very painful.
haydenrbm said:
Okay it is unlocked, but now it just stays on the AOKP boot screen
Thank you for the help btw, it must be very painful.
Click to expand...
Click to collapse
Press Volume UP + Power button, once the screen goes dead, press Volume DOWN + Power button to get back into bootloader. Then flash a custom recovery (Like TWRP) and start flashing the Stock nandroid backups, can be found from here Collection of Stock backups
BerndM14 said:
Press Volume UP + Power button, once the screen goes dead, press Volume DOWN + Power button to get back into bootloader. Then flash a custom recovery (Like TWRP) and start flashing the Stock nandroid backups, can be found from here Collection of Stock backups
Click to expand...
Click to collapse
Okay i have got into the bootloader now, thanks.
I cannot put the rom into the internal storage because my computer wont detect the phone
haydenrbm said:
Okay i have got into the bootloader now, thanks.
the adb devices will show it if i have it in recovery mode but not bootloader, why is that ?
Click to expand...
Click to collapse
You didn't read any of my posts about that, did you? lol
I already stated adb commands like "adb devices" "adb reboot" etc will NOT work in bootloader, it'll work in the system and yes, it'll work in recovery for sideloading etc, but NOT in bootloader. For bootloader you HAVE to use fastboot commands, "fastboot devices" "fastboot reboot" "fastboot oem lock" "fastboot oem get_identifier_token" "fastboot flash unlocktoken Unlock_code.bin" etc etc
BerndM14 said:
You didn't read any of my posts about that, did you? lol
I already stated adb commands like "adb devices" "adb reboot" etc will NOT work in bootloader, it'll work in the system and yes, it'll work in recovery for sideloading etc, but NOT in bootloader. For bootloader you HAVE to use fastboot commands, "fastboot devices" "fastboot reboot" "fastboot oem lock" "fastboot oem get_identifier_token" "fastboot flash unlocktoken Unlock_code.bin" etc etc
Click to expand...
Click to collapse
Sorry I skipped past your first response, that makes sense now.
So I need to put the rom on my internal storage then go into recovery and install the zip using TWRP..but when I plug my phone into the computer the internal storage wont show up.
I do have sync manager installed also, and it wont show up in that either
haydenrbm said:
Okay i have got into the bootloader now, thanks.
I cannot put the rom into the internal storage because my computer wont detect the phone
Click to expand...
Click to collapse
With that adb devices command again in bootloader? Did you flash TWRP yet? If so, Got to Advanced >>> ADB Sideload >>> Swipe to start sideload.
Place the ROM.zip file in your adb folder then:
Connect phone to PC, while still in recovery mode type adb devices to make sure your device gets picked up, should show you the serial number for device AS WELL as "sideload" next to it, if so then you are hooked up right. Next type adb sideload name_of_zip.zip wait until fully finished.
If sideload fails for one or other reason you can also try to push it. Reboot to recovery again, type adb devices to make sure device gets picked up, type adb push name_of_zip.zip /data/media/0/ or adb push name_of_zip.zip /sdcard/ flash as per usual then.
Yet somehow I don't think you even need to go to these steps
BerndM14 said:
With that adb devices command again in bootloader? Did you flash TWRP yet? If so, Got to Advanced >>> ADB Sideload >>> Swipe to start sideload.
Place the ROM.zip file in your adb folder then:
Connect phone to PC, while still in recovery mode type adb devices to make sure your device gets picked up, should show you the serial number for device AS WELL as "sideload" next to it, if so then you are hooked up right. Next type adb sideload name_of_zip.zip wait until fully finished, once done reboot back into recovery and flash rom.
If sideload fails for one or other reason you can also try to push it. Reboot to recovery again, type adb devices to make sure device gets picked up, type adb push name_of_zip.zip /data/media/0/ or adb push name_of_zip.zip /sdcard/ flash as per usual then.
Yet somehow I don't think you even need to go to these steps
Click to expand...
Click to collapse
haha..thank you for baby steps
The sideload completed and i rebooted then went back into recovery and install but there isn't a zip file anywhere
Edit: wow..some how i reset it and it turned on and got into the phone... and now it connects to the computer so i should be able to follow the other tutorial now...man you are a life saver thank you so much
haydenrbm said:
haha..thank you for baby steps
The sideload completed and i rebooted then went back into recovery and install but there isn't a zip file anywhere
Edit: wow..some how i reset it and it turned on and got into the phone... and now it connects to the computer so i should be able to follow the other tutorial now...man you are a life saver thank you so much
Click to expand...
Click to collapse
I made a small mistake with the sideload though, it actually installs automatically as such you don't have to go back into recovery to flash, as it did it already, sorry. Edited post to fix.
Well as long as you can get into phone now to copy the nandroid backup to the phone all should be in order, can flash back stock from the nandroid then.
Glad it worked out then.:good:
BerndM14 said:
I made a small mistake with the sideload though, it actually installs automatically as such you don't have to go back into recovery to flash, as it did it already, sorry. Edited post to fix.
Well as long as you can get into phone now to copy the nandroid backup to the phone all should be in order, can flash back stock from the nandroid then.
Glad it worked out then.:good:
Click to expand...
Click to collapse
Hello BerndM14, thank you for this baby steps. Mine m8 is a gpe version, it's 4.4.2 google rom, rooted, cwm recovery, s-on. I was trying to flash the full google 4.4.3 zip rom under recovery, however, after that, my m8 automaticlly enter recovery everytime reboot. And I can manually enter the bootloader, my pc can find the m8 both in recovery and bootloader. I searched this post, and do it accordingly, I download the gpe stock backup KOT49H.H16 - 1.16.1700.16 - CWM Philz touch and use adb sideload gpe3.zip to the cell phone sucessfully, then the recovery automaticlly starts installing rom, then, I got below message:
-- Erasing & formatting /system as ext4 (Unmounted system)
system partition formatted!
-- Mounting system partition for writing
Writing rom system to system partition
Rom system written successfully!
@symlinking and permissions
--Creating toolbox symlinks
--creating additional symlinks
Symlinks Set!
--installing busybox
Set_perm: some changes failed
E:Error in /tmp/update.zip
(status 7)
installation aborted.
Install from sideload complete.
then, I reboot it manually. problem still there, still enter the recovery automaticlly.
do you have any comments on this? please.
thanks,
hello,
after i failed to root my phone
everytime i try to put it in recovery mode it goes back to fastboot mode ..
even if i tried to flash a recovery on it , it would boot to fastboot mode
even when trying to install a official htc software update it just boots into fastboot ..
now i want to get it back to stock..
can you please help me !!
if someone would like to help me .. i can open teamviewer and he can do it for me ..
thx
zsnorow said:
hello,
after i failed to root my phone
everytime i try to put it in recovery mode it goes back to fastboot mode ..
even if i tried to flash a recovery on it , it would boot to fastboot mode
even when trying to install a official htc software update it just boots into fastboot ..
now i want to get it back to stock..
can you please help me !!
if someone would like to help me .. i can open teamviewer and he can do it for me ..
thx
Click to expand...
Click to collapse
If you are able to boot into fastboot, search the latest TWRP and flash it via adb. Connect your device while in fastboot mode and see if it recognize it.
If it does put the recovery file you have downloaded on your desktop and open a command window, press shift and right click at the same time and click on Open command window here.
Type adb devices, if you see a serial number go on and type adb reboot bootloader, then type fastboot flash recovery [ the name of the recovery file you have just downloaded ]
You can do this just by powering on your phone, no need to be already in fastboot mode, just follow the commands.
Press shift and right click : open command window here : adb devices : adb reboot bootloader : fastboot flash recovery [ the name of the recovery file you have just downloaded, do not forget the .img extension ]
fastboot reboot
Once you have a working TWRP you can flash your corresponding backup and go back to stock. The backup will be flashed from TWRP, search for instructions.
XSL-FO said:
If you are able to boot into fastboot, search the latest TWRP and flash it via adb. Connect your device while in fastboot mode and see if it recognize it.
If it does put the recovery file you have downloaded on your desktop and open a command window, press shift and right click at the same time and click on Open command window here.
Type adb devices, if you see a serial number go on and type adb reboot bootloader, then type fastboot flash recovery [ the name of the recovery file you have just downloaded ]
You can do this just by powering on your phone, no need to be already in fastboot mode, just follow the commands.
Press shift and right click : open command window here : adb devices : adb reboot bootloader : fastboot flash recovery [ the name of the recovery file you have just downloaded, do not forget the .img extension ]
fastboot reboot
Once you have a working TWRP you can flash your corresponding backup and go back to stock. The backup will be flashed from TWRP, search for instructions.
Click to expand...
Click to collapse
can you sir please give me a link for the TWRP and teach em how to flash it ? it would be much appreciated..
zsnorow said:
can you sir please give me a link for the TWRP and teach em how to flash it ? it would be much appreciated..
Click to expand...
Click to collapse
http://teamw.in/project/twrp2 and click on the upper right Get TWRP for your device.
Choose your device recovery and download the adb version. That is the .img
Once you have downloaded TWRP put it on your desktop.
Connect your device with your laptop/pc with the unknown sources checked also the usb debugging checked.
Move your mouse over a free space on your desktop, click once just to be sure there is no app or file clicked.
Then press shift and keep it pressed while you right click your mouse.
Press open command window here
in that command window type : adb devices
if you see a serial number type : adb reboot bootloader
then type : fastboot flash recovery openrecovery-twrp-2.8.1.0-m8.img
fastboot reboot
openrecovery-twrp-2.8.1.0-m8 : This is an example, you will write the name of your recovery but it should be pretty much the same.
Good luck.
Are you familiar with
adb/fastboot commands?
It's a bad idea to mess with your phone if you don't know how to repair it if something goes wrong
spinninbsod said:
It's a bad idea to mess with your phone if you don't know how to repair it if something goes wrong
Click to expand...
Click to collapse
I agree with you but maybe he has done some reading and has fixed it sense he hasn't given us an update
ive tried everything
jball said:
I agree with you but maybe he has done some reading and has fixed it sense he hasn't given us an update
Click to expand...
Click to collapse
i tried everything to fix my phone like sideloading (my phone doesent get recognised when in sideload mode) , pushing a ROM and the flashing it with TWRP (it says that its completed but it doesent work)..
what else can i do .. cant someone do it for me via teamviewer ..
zsnorow said:
i tried everything to fix my phone like sideloading (my phone doesent get recognised when in sideload mode) , pushing a ROM and the flashing it with TWRP (it says that its completed but it doesent work)..
what else can i do .. cant someone do it for me via teamviewer ..
Click to expand...
Click to collapse
What guides/tutorials have you followed to get to the point you are at now.I'm sure someone wouldn't mind teamviewing the whole process but what would you learn by having that done .
From start to finish what have you used?
i honestly cant remember everything i did
jball said:
What guides/tutorials have you followed to get to the point you are at now.I'm sure someone wouldn't mind teamviewing the whole process but what would you learn by having that done .
From start to finish what have you used?
Click to expand...
Click to collapse
i cant remember everything i did but im sure that i followed the tutorials that are on youtube/XDA/android forums correctly
zsnorow said:
i tried everything to fix my phone like sideloading (my phone doesent get recognised when in sideload mode) , pushing a ROM and the flashing it with TWRP (it says that its completed but it doesent work)..
what else can i do .. cant someone do it for me via teamviewer ..
Click to expand...
Click to collapse
You say "pushing a ROM" with what?
You don't push a ROM with TWRP you just flash it.
Or are you talking about pushing the ROM with fastboot?
If you have TWRP than download a stock backup and flash it.
Take a long look at my profile man and if you look just right you will see I've done and asked some stupid things in my travels here on XDA.I can tell you I remember every phone and ridiculous thing I've done to each of them,I still feel crunchy when I think of the mistakes.
We really need more info about the full process.please I'm not trying to offend you and I'm trying to help
zsnorow said:
i cant remember everything i did but im sure that i followed the tutorials that are on youtube/XDA/android forums correctly
Click to expand...
Click to collapse
If you can't remember what you did, or at least even try to list in detail the steps you did as best you can remember; it makes it very hard for anyone to help.
Saying you followed some tutorials on an entire website (3 websites actually) doesn't tell us jack, and isn't any better than telling us nothing.
Its not even clear the current condition of the phone. Your OP says TWRP doesn't work, then a later post says you are trying things with TWRP, so presumably you have TWRP. But since you never stated that, we can only guess.
What happens when you try to adb push or sideload? What error messages, does it make the phone reboot, stuck on boot screen, etc?
TWRP working? Bootloader is unlocked? If yes to both of those, you should be able to just adb push a ROM, or put one on removable SD with a card reader attached to your computer. Than flash the ROM in TWRP.
same thing happened with me but i remember what i did
redpoint73 said:
If you can't remember what you did, or at least even try to list in detail the steps you did as best you can remember; it makes it very hard for anyone to help.
Saying you followed some tutorials on an entire website (3 websites actually) doesn't tell us jack, and isn't any better than telling us nothing.
Its not even clear the current condition of the phone. Your OP says TWRP doesn't work, then a later post says you are trying things with TWRP, so presumably you have TWRP. But since you never stated that, we can only guess.
What happens when you try to adb push or sideload? What error messages, does it make the phone reboot, stuck on boot screen, etc?
TWRP working? Bootloader is unlocked? If yes to both of those, you should be able to just adb push a ROM, or put one on removable SD with a card reader attached to your computer. Than flash the ROM in TWRP.
Click to expand...
Click to collapse
firstly i unlocked my bootloader via htcdev website then i installed twrp recovery successfully and then when i tried to root my phone by installing two zip files (mm-su-boot. & beta super su) i installed these two files and then tried to reboot my phone it opened in fastboot mode only . then i read here about the revolution hd rom installed it successfully but it does not reboot . help needed
farhanakhtar39 said:
firstly i unlocked my bootloader via htcdev website then i installed twrp recovery successfully and then when i tried to root my phone by installing two zip files (mm-su-boot. & beta super su) i installed these two files and then tried to reboot my phone it opened in fastboot mode only . then i read here about the revolution hd rom installed it successfully but it does not reboot . help needed
Click to expand...
Click to collapse
Your device is M8 dual SIM .. mm-su-boot is for M8 single SIM, won't work on your device.
Install custom ROM with support for Dual SIM or restore your stock ROM backup
please can you provide any link of the rom for dual sim addition
farhanakhtar39 said:
please can you provide any link of the rom for dual sim addition
Click to expand...
Click to collapse
Not so sure,
if Sense ROM - https://forum.xda-developers.com/htc-one-m8/development/rom-sense-6-12-401-4-mra58k-stock-t3296066
maybe S.ROM too has dual SIM support, you need to ask in their thread
https://forum.xda-developers.com/ht...the-worlds-first100-m9-port-m8upload-t3064838
if non-Sense ROM
CM13 ROM - https://forum.xda-developers.com/htc-one-m8/development/rom-cyanogenmod-13-0-experimental-t3259068
Nougat ROM -
https://forum.xda-developers.com/showthread.php?t=2753248
https://forum.xda-developers.com/htc-one-m8/development/rom-resurrection-remix-v5-8-0-t3507210
https://forum.xda-developers.com/ht...cyanogenmod-14-1-htc-one-m8-dual-sim-t3507192
There are a few more that support Dual SIM but you have to check & ask in their development thread as I'm not familiar with most of the available custom ROMs .. I don't try most of them
Thnks
Thanks buddy it worked
cm 13 worked for me !
God bless you
If I may jump in on this post and ask some advise my m8s is only booting to fastboot screen it has never been flashed, have tried recovery: nothing just goes back to fastboot, also wiped cache and factory reset: same result..... It has done this 2 times previous but only after restarting phone, usually repeatedly doing reboot it loads but it's been 2 days now and still only getting fastboot screen...plez help
My phone is having similar issues
Stanna16 said:
If I may jump in on this post and ask some advise my m8s is only booting to fastboot screen it has never been flashed, have tried recovery: nothing just goes back to fastboot, also wiped cache and factory reset: same result..... It has done this 2 times previous but only after restarting phone, usually repeatedly doing reboot it loads but it's been 2 days now and still only getting fastboot screen...plez help
Click to expand...
Click to collapse
I recently decided to root and install a custom rom on my old stock sprint HTC one m8. I unlocked the boot loader via HTC Dev website. I then flashed the TWRP recovery. Since doing the latter step, it's been booting into fast boot all the time! Did you ever figure out what was wrong with your phone?
pancho2009 said:
I recently decided to root and install a custom rom on my old stock sprint HTC one m8. I unlocked the boot loader via HTC Dev website. I then flashed the TWRP recovery. Since doing the latter step, it's been booting into fast boot all the time! Did you ever figure out what was wrong with your phone?
Click to expand...
Click to collapse
You only flashed TWRP onto the phone? Or did you root also?
Not nearly enough info to provide the proper help.
Please do fastboot getvar all, and post the results (delete IMEI and serial number before posting).
What version TWRP?
What version SuperSU did you flash (if you got that far)?
Hi, i played around with my new OP3, and i wanted to root it. Since i'm noob at rooting, it went wrong. (i did it with twrp)
So first it just went in to bootloop, then i was still able to get to rcovery and stuff, but i followed a guide to fix bootloop, and that ****ed it even more up. The guide i followedet told me to use "OnePlus3_Unbrick_Tool"
After using "OnePlus3_Unbrick_Tool", i now cant even go into recovery anymore, the only thing i can do is go to bootloader, but when i'm in bootloader now, it wont connect proberly, so that i can use "flash twrp", so that i can use twrp recovery.
Also when i try to boot it, it because of "OnePlus3_Unbrick_Tool" goes into something, where it says "md5 checksum failed", and then restarts and does it again and again.....
I hope it's not bricked forever, pls help ))
have you tried re-flashing the stock or twrp recovery with adb sideload command?
if not give it a shot, it might work.
bonham1988 said:
have you tried re-flashing the stock or twrp recovery adb sideload command?
Click to expand...
Click to collapse
And how do you say I do that? I have tried using the "tool all in one", where you han flash both stock and twrp, but it doesnt seem to do anything, when i press them (and the device is in bootloader)
Godeske said:
And how do you say I do that? I have tried using the "tool all in one", where you han flash both stock and twrp, but it doesnt seem to do anything, when i press them (and the device is in bootloader)
Click to expand...
Click to collapse
Just boot into bootloader mode and through command prompt check if your phone is detected by typing fastboot devices. If its detected then you flash a new recovery again. Forget the toolkit, just look for instructions on how to install a custom recovery.
Sent from my OnePlus3 using XDA Labs
bonham1988 said:
Just boot into bootloader mode and through command prompt check if your phone is detected by typing fastboot devices. If its detected then you flash a new recovery again. Forget the toolkit, just look for instructions on how to install a custom recovery.
Sent from my OnePlus3 using XDA Labs
Click to expand...
Click to collapse
Okay i've tried that now, and it wont allow me unlock my bootloader from command prompt, and i cant do the flash while it's locked.. what to do?
Godeske said:
Okay i've tried that now, and it wont allow me unlock my bootloader from command prompt, and i cant do the flash while it's locked.. what to do?
Click to expand...
Click to collapse
In fastboot mode, did you manage to find your device on the computer? On Linux this is "sudo fastboot devices", on Windows it should be roughly similar.
simthadim said:
In fastboot mode, did you manage to find your device on the computer? On Linux this is "sudo fastboot devices", on Windows it should be roughly similar.
Click to expand...
Click to collapse
When im in fastboot mode in the bootloader, i can only find it in "device manager" as "marshall london device -> marshall london bootloader interface"
Godeske said:
When im in fastboot mode in the bootloader, i can only find it in "device manager" as "marshall london device -> marshall london bootloader interface"
Click to expand...
Click to collapse
Might seem a silly question but what phone are you using? If it is a OnePlus3 have you installed the correct drivers?
ghostofcain said:
Might seem a silly question but what phone are you using? If it is a OnePlus3 have you installed the correct drivers?
Click to expand...
Click to collapse
Pretty sure i have, but i have booked a session with oneplus costumer service now, so that they do it for me live lololol
bonham1988 said:
have you tried re-flashing the stock or twrp recovery with adb sideload command?
if not give it a shot, it might work.
Click to expand...
Click to collapse
Hey bonham,
The same thing happened to me but when I try to sideload it says I need 1.0.32 or higher to sideload this device
What should I do?
gavintoronto2016 said:
Hey bonham,
The same thing happened to me but when I try to sideload it says I need 1.0.32 or higher to sideload this device
What should I do?
Click to expand...
Click to collapse
Adb version is outdated. Just download the latest ones.
Sent from my OnePlus3 using XDA Labs
Hey guys, if there are some of you, who knows a lot about this, would you like to answer this comment? Idk maybe we could use teamviewer to help me or something
simthadim said:
In fastboot mode, did you manage to find your device on the computer? On Linux this is "sudo fastboot devices", on Windows it should be roughly similar.
Click to expand...
Click to collapse
Ohh i think i understand your question. YEs in command prompt I am able to find the device, it is connected.
(do you know a lot about this, maybe you could teamview me to help?))
Godeske said:
Ohh i think i understand your question. YEs in command prompt I am able to find the device, it is connected.
(do you know a lot about this, maybe you could teamview me to help?))
Click to expand...
Click to collapse
Hey!
I'm not the expert but I have played with my 1+3 enough to have some knowledge.
First of all, do not use "all in one tools", those do not put you in control.
Cool, so fastboot is detected, though you can't get into the recovery?
Step 1) make sure you have the latest version of "fastboot" and "adb" (Android Debug Bridge) and unlock the bootloader. This tread should be helpfull: http://forum.xda-developers.com/oneplus-3/how-to/oneplus-3-how-to-unlock-bootloader-t3398733
You need to do this, because otherwise we will not be able to proceed (i.e. the phone is to be 'unlocked' for what we are about to do).
Step 2) If you are ready than let's flash a new recovery (TWRP):
This is also step 2 in the thread mentioned above. Very important: "Once the flash has completed, Don't use the "Fastboot Reboot" Command Instead Unplug Your phone then Manually boot it into recovery by keeping Power + Volume Down button pressed."
So once you have flashed a new recovery using fastboot, than you should reboot your phone into the new recovery!
step 3)
Once in the new recovery (TWRP) go to advanced and to ADB sideload. Make sure your computer detects your device with the command "adb devices" and flash a new ROM. Just for simplicity use the official OOS 3.2.4.
This should do the trick. Before you go and try make sure you understand EVERYTHING I have written. Let me know if you have questions.
simthadim said:
Hey!
I'm not the expert but I have played with my 1+3 enough to have some knowledge.
First of all, do not use "all in one tools", those do not put you in control.
Cool, so fastboot is detected, though you can't get into the recovery?
Step 1) make sure you have the latest version of "fastboot" and "adb" (Android Debug Bridge) and unlock the bootloader. This tread should be helpfull: http://forum.xda-developers.com/oneplus-3/how-to/oneplus-3-how-to-unlock-bootloader-t3398733
You need to do this, because otherwise we will not be able to proceed (i.e. the phone is to be 'unlocked' for what we are about to do).
Step 2) If you are ready than let's flash a new recovery (TWRP):
This is also step 2 in the thread mentioned above. Very important: "Once the flash has completed, Don't use the "Fastboot Reboot" Command Instead Unplug Your phone then Manually boot it into recovery by keeping Power + Volume Down button pressed."
So once you have flashed a new recovery using fastboot, than you should reboot your phone into the new recovery!
step 3)
Once in the new recovery (TWRP) go to advanced and to ADB sideload. Make sure your computer detects your device with the command "adb devices" and flash a new ROM. Just for simplicity use the official OOS 3.2.4.
This should do the trick. Before you go and try make sure you understand EVERYTHING I have written. Let me know if you have questions.
Click to expand...
Click to collapse
Thank you, but i have not enabled "allow oem unlocking" in the developer settings when the phone worked, so i get a error message "FAILED (remote: oem unloc is not allowed)
What to do to unlock it then?
Bro, download 3.2.4 oos rom zip file from official link. Its around 1.3 GB. Just connect ur OP3 to computer. It will detect as MTP device.Im my computer it was in the name of RAIN Transfer the zip file to internal storage. Wipe cache. And select install option in TWRP and select the zip file u pushed and flash it. Best of luck..
jaganmohans said:
Bro, download 3.2.4 oos rom zip file from official link. Its around 1.3 GB. Just connect ur OP3 to computer. It will detect as MTP device.Im my computer it was in the name of RAIN Transfer the zip file to internal storage. Wipe cache. And select install option in TWRP and select the zip file u pushed and flash it. Best of luck..
Click to expand...
Click to collapse
Bro, if just it were that simple, but it's not.. It doesn't find the phone in my computer...
simthadim said:
Hey!
I'm not the expert but I have played with my 1+3 enough to have some knowledge.
First of all, do not use "all in one tools", those do not put you in control.
Cool, so fastboot is detected, though you can't get into the recovery?
Step 1) make sure you have the latest version of "fastboot" and "adb" (Android Debug Bridge) and unlock the bootloader. This tread should be helpfull: http://forum.xda-developers.com/oneplus-3/how-to/oneplus-3-how-to-unlock-bootloader-t3398733
You need to do this, because otherwise we will not be able to proceed (i.e. the phone is to be 'unlocked' for what we are about to do).
Step 2) If you are ready than let's flash a new recovery (TWRP):
This is also step 2 in the thread mentioned above. Very important: "Once the flash has completed, Don't use the "Fastboot Reboot" Command Instead Unplug Your phone then Manually boot it into recovery by keeping Power + Volume Down button pressed."
So once you have flashed a new recovery using fastboot, than you should reboot your phone into the new recovery!
step 3)
Once in the new recovery (TWRP) go to advanced and to ADB sideload. Make sure your computer detects your device with the command "adb devices" and flash a new ROM. Just for simplicity use the official OOS 3.2.4.
This should do the trick. Before you go and try make sure you understand EVERYTHING I have written. Let me know if you have questions.
Click to expand...
Click to collapse
Hey i have the same problem but this fix does not work for me.
So I have the bootloader unlocked and I can enter the bootload and my computer detects my device which is nice.
when I flash twrp on my phone trough CMD it doesnt work, my PC tells me that everything is okay but my phone will not boot into twrp and instead it will give me weird errors.
---------- Post added at 03:31 PM ---------- Previous post was at 02:56 PM ----------
this fix worked for me,
On the screen when the phone failed to md5 checksum, you've got several partition failed right? in red text.
- download this : https://www.androidfilehost.com/?fid=24591000424942573
and then extract.
- download platform tools attached below. extract in the same folder with first file you've downloaded.
- Boot your phone to fastboot mode, plug your usb, make sure adb and fastboot driver are installed.
- on the folder, hold shift and right click, click open command here
- type fastboot devices
- make sure your serial number appear.
- now flash the img of the missing file according to the partition in red text on your ms5 checksum failed one by one.
- e.g. "fastboot flash boot_aging boot_aging.img.
- make sure you flash all the missing partition.
- type fastboot reboot.
this will boot you to oos 3.1.2.
unfortunately I couldn't extract the newest oos dat. data. but you could always take the OTA
goodluck mate. sorry for my english
Godeske said:
Bro, if just it were that simple, but it's not.. It doesn't find the phone in my computer...
Click to expand...
Click to collapse
Hmm bad try installing all op3 drivers and see whether phone is detected or not. I was in the same situation previously. Pushing zip through adp terminal is painful process. I got device offline first,after solving that i got service not recognized issue. For solving that usb debugging needs to be enabled i stuck in that step.
can you enter recovery trough fastboot mode? I.e. if you are in fastboot mode you van use the volume keys to select recovery.
100% sure you can't enter recovery?
you can try Fast and pro's option. let us know!
hi devs
i flashed accidentially Chinese recovery rom on my whyred now i m unable to switch from Chinese to global version as i tried every method fastboot,recovery,qfil,mi flash and edl mode i mean every possible way but all in vain as every method ended with error and my fastboot command is locked.
so what can i do please suggest me
it's Chinese miui 11
guys please help me i m frustrated tried every available method on internet downloaded tons of file.
aliasgertaj said:
guys please help me i m frustrated tried every available method on internet downloaded tons of file.
Click to expand...
Click to collapse
What you are trying to do? Just switch from Chinese to Global? or your device is bricked now?
What did happen after that you flashed the Chinese recovery ROM?
What modes do you have available?
Did you unlock bootloader previously?
SubwayChamp said:
What you are trying to do? Just switch from Chinese to Global? or your device is bricked now?
What did happen after that you flashed the Chinese recovery ROM?
What modes do you have available?
Did you unlock bootloader previously?
Click to expand...
Click to collapse
i m not bricked as my device is working fine
but now no fastboot command working i m not able to flash custom recovery
i tried fastboot method , used miflash method every miflash from old to newest , qfil edl mode method with miflash and qualcomm flash tool
i m just able to switch between china stable n developer rom
if i m able to unlock ma fastboot command then i can flash atleast custom recovery .
kindly help me as all method ended up every time with diffrent error.
aliasgertaj said:
i m not bricked as my device is working fine
but now no fastboot command working i m not able to flash custom recovery
i tried fastboot method , used miflash method every miflash from old to newest , qfil edl mode method with miflash and qualcomm flash tool
i m just able to switch between china stable n developer rom
if i m able to unlock ma fastboot command then i can flash atleast custom recovery .
kindly help me as all method ended up every time with diffrent error.
Click to expand...
Click to collapse
Fastboot flashing commands won't work if you have bootloader locked.
Did you unlock bootloader previously and probably get locked again?
Did you enable all the proper options on Developer section, i.e. USB debugging and check if device is recogniced on adb commands?
What do you get with "fastboot getvar all"?
subwaychamp said:
fastboot flashing commands won't work if you have bootloader locked.
Did you unlock bootloader previously and probably get locked again?
Did you enable all the proper options on developer section, i.e. Usb debugging and check if device is recogniced on adb commands?
What do you get with "fastboot getvar all"?
Click to expand...
Click to collapse
thanks a lot dude i m on unlock boot loader .
But bootloader some time works means sometimes it shows my device name after available device command it shows only ???????? Fastboot devices
i tried all way possible but none of them worked.
And i m unable to switch from china to global.
Only i can do is switch between china stable to developer.
i tried getvar command but it gave me this
PS C:\adb> adb reboot bootloader
error: device '(null)' not found
PS C:\adb> fastboot getvar all
getvar:all FAILED (command write failed (Unknown error))
finished. total time: 5.007s
PS C:\adb>
aliasgertaj said:
i tried getvar command but it gave me this
PS C:\adb> adb reboot bootloader
error: device '(null)' not found
PS C:\adb> fastboot getvar all
getvar:all FAILED (command write failed (Unknown error))
finished. total time: 5.007s
PS C:\adb>
Click to expand...
Click to collapse
And you said you enabled USB debuging?!? you didn't. First enable it under development tools.
MAKE SURE YOUR USING RIGHT ADB/FASTBOOT TOOLS AND DRIVERS.
After 'adb reboot bootloader' use 'fastboot devices'. You can change usb cable and if you still get errors try using usb hub.
If all above fails than try it on WIN7 PC.
aliasgertaj said:
thanks a lot dude i m on unlock boot loader .
But bootloader some time works means sometimes it shows my device name after available device command it shows only ???????? Fastboot devices
i tried all way possible but none of them worked.
And i m unable to switch from china to global.
Only i can do is switch between china stable to developer.
Click to expand...
Click to collapse
aliasgertaj said:
i tried getvar command but it gave me this
PS C:\adb> adb reboot bootloader
error: device '(null)' not found
PS C:\adb> fastboot getvar all
getvar:all FAILED (command write failed (Unknown error))
finished. total time: 5.007s
PS C:\adb>
Click to expand...
Click to collapse
I think you are not properly booted to the proper state while you're trying certain commands. Just to be clear; adb works while your device is power on and fastboot commands will work only while your device is in fastboot mode not while on adb mode. A way to be sure that you are doing properly is enabling USB debugging first but while connected device with PC, a prompt will appear from device screen and then tap on "always allow", then you have to type "adb devices" and follow step by step, if device is recognized you can go to the next step with "adb reboot bootloader" then in fastboot you have to see the bunny otherwise is not properly in fastboot mode, then you can follow with "fastboot devices" and so on, keep in mind that any command will work until device is properly recognized.
SubwayChamp said:
I think you are not properly booted to the proper state while you're trying certain commands. Just to be clear; adb works while your device is power on and fastboot commands will work only while your device is in fastboot mode not while on adb mode. A way to be sure that you are doing properly is enabling USB debugging first but while connected device with PC, a prompt will appear from device screen and then tap on "always allow", then you have to type "adb devices" and follow step by step, if device is recognized you can go to the next step with "adb reboot bootloader" then in fastboot you have to see the bunny otherwise is not properly in fastboot mode, then you can follow with "fastboot devices" and so on, keep in mind that any command will work until device is properly recognized.
Click to expand...
Click to collapse
thanks bro
yesterday i used xiaomitool v2 as it reboot automatically device in fastboot mode but as i said after in fastboot mode it doesn't boot in adb mode.
and what is proper method to open fastboot mode i m doing it by holding power and volume down button.
drnightshadow said:
And you said you enabled USB debuging?!? you didn't. First enable it under development tools.
MAKE SURE YOUR USING RIGHT ADB/FASTBOOT TOOLS AND DRIVERS.
After 'adb reboot bootloader' use 'fastboot devices'. You can change usb cable and if you still get errors try using usb hub.
If all above fails than try it on WIN7 PC.
Click to expand...
Click to collapse
thanks for response bro
i did it under developer option and trusted my computer connection also and install adb fastboot devices many time changed cable and port but nothing happen. i tried fastboot files of china stable rom but it also doesn't worked
aliasgertaj said:
thanks bro
yesterday i used xiaomitool v2 as it reboot automatically device in fastboot mode but as i said after in fastboot mode it doesn't boot in adb mode.
and what is proper method to open fastboot mode i m doing it by holding power and volume down button.
Click to expand...
Click to collapse
Just trying to determine what your words exactly mean when you say "after in fastboot mode it doesn't boot in adb mode." ... without entering in more technical insights adb works when device is on, no sense to boot to fastboot to try to boot to adb after that (?)
If you can boot to fastboot what you have to try firstly is unlock bootloader or be sure that is already unlocked using
Code:
fastboot oem device-info
if your device is or get unlocked then you can try to flash or just boot to a custom recovery but if you can't determine until now if your device is really unlocked then you couldn't go further.
The hardware method to enter to fastboot is from a device off; pressing both pwr and vol down buttons but if the bunny is not displayed probably you didn't really get fastboot mode.
SubwayChamp said:
Just trying to determine what your words exactly mean when you say "after in fastboot mode it doesn't boot in adb mode." ... without entering in more technical insights adb works when device is on, no sense to boot to fastboot to try to boot to adb after that (?)
If you can boot to fastboot what you have to try firstly is unlock bootloader or be sure that is already unlocked using
Code:
fastboot oem device-info
if your device is or get unlocked then you can try to flash or just boot to a custom recovery but if you can't determine until now if your device is really unlocked then you couldn't go further.
The hardware method to enter to fastboot is from a device off; pressing both pwr and vol down buttons but if the bunny is not displayed probably you didn't really get fastboot mode.
Click to expand...
Click to collapse
i m frustrated now tried all the thing tried official flash tool official build but even official build by miflash official latest tool unable to flash image
i bought my device to official xiaomi service center they told it will be done in an hour but after couple of hour they returned my phone that it cant be updated.??????
shame on xiaomi that they implemented a method that they themselves also don't know how to revert it.
aliasgertaj said:
i bought my device to official xiaomi service center they told it will be done in an hour but after couple of hour they returned my phone that it cant be updated.??????
shame on xiaomi that they implemented a method that they themselves also don't know how to revert it.
Click to expand...
Click to collapse
Do yo use WIN10? Find PC with Win7... and install adb/fastboot app and drivers. Than try..
Is your system working now?
Just unlock your bootloader and install OrangeFox recovery than you can flash whatever you need.
Problem solved.
drnightshadow said:
Do yo use WIN10? Find PC with Win7... and install adb/fastboot app and drivers. Than try..
Is your system working now?
Just unlock your bootloader and install OrangeFox recovery than you can flash whatever you need.
Problem solved.
Click to expand...
Click to collapse
ok bro i will try today with another pc and update you
aliasgertaj said:
ok bro i will try today with another pc and update you
Click to expand...
Click to collapse
thanks installed twrp on other pc running on windows 7 but now internal storage goes 0mb unable to mount system
aliasgertaj said:
thanks installed twrp on other pc running on windows 7 but now internal storage goes 0mb unable to mount system
Click to expand...
Click to collapse
Wtf .. what's wrong with you.. you did everything we said wrong... Where and when did I told you to install TWRP????
I'm done with you...
Good luck with china ROM.
Ignorance is a bliss.
drnightshadow said:
Wtf .. what's wrong with you.. you did everything we said wrong... Where and when did I told you to install TWRP????
I'm done with you...
Good luck with china ROM.
Ignorance is a bliss.
Click to expand...
Click to collapse
thanks dude i installed twrp wipe my internal storage there is some error then some tricks goes perfect as i supposed and woohaa i installed masik port edition and now my phone works fine.
aliasgertaj said:
thanks dude i installed twrp wipe my internal storage there is some error then some tricks goes perfect as i supposed and woohaa i installed masik port edition and now my phone works fine.
Click to expand...
Click to collapse
TWRP can't bypass encryption, when you have no access to read data (0mb) then you have to format it, to avoid that is always recommended use OrangeFox, just for future reference, if you understand that you can flash OrangeFox through TWRP for better experience.
Also you can use this tool to help you to automate some stuff https://github.com/Szaki/XiaomiADBFastbootTools
Hello,
I hope this is the right section for this post.
I've been using a Note 8 Pro with zero issues until one week ago when I accidentally dropped the phone in the water.
After a few seconds submerged the display turned off and I felt an intense heat coming from the zone of the battery.
Having no chance to recover the phone (tried with Isopropyl Alcohol too) I decided to open it and manually dry/clean each component, having seen the situation inside gave me the phone is dead but I still want to recover some pictures/data from it.
Before opening the open Minitool was not detecting any device on my Windows Laptop, after cleaning each component Minitool is instead detecting the phone via USB, but I still can't extract any data because the "Usb debugging" option is not tuned on (and no the device is not rooted).
Is there any option to extract data from the phone? There's a way to turn on USB Debugging via ADB on a non-rooted phone?
Thanks,
Andrea.
how about trying your luck with a service ? most of the time they do have access to special programs, which have a better functionality than adb.
Thanks for the hint, but I am not happy with the idea of someone playing with my data
1. Try reboot phone to recovery
2. Connect it to your computer (download Platform-tools)
3. In the folder with Platform-tools open cmd
4. In cmd - adb shell
5. cd storage/emulated/0
6. ls
7. Now, using the commands, drag files from your phone to your PC
Thanks for your hint.
No luck so far, I think because the phone is not in recovery mode.
I can hear the phone starting up several times (hear the jingle) so I think it's in a reboot loop and I don't know how to boot it into recovery mode wo a working display (tried with power/volume up combination with no luck).
From the windows taskbar I can see that the phone is recognized for a few seconds before it restarts.
EDIT: trying to switch the phone on with the combination "power/volume down" brings to a kind of stable state and I can now see the phone in the windows taskbar recognized as a generic "android device". Still no luck when trying to access the phone as there's no device in windows and no device obtained through "adb devices" command.
EDIT1: I think that the phone is in "FASTBOOT" mode. If I type "fastboot devices" I can see it detected but still can't access it.
Any idea? Should I give up?
If it's popping up and down you need something to keep track.
You can try my UsbLog.exe (in the sig), it just sits there and shows what devices appear (if they have a driver) and disappear.
Try these to see if anything is working:
Code:
C:\>fastboot devices
C:\>fastboot getvar all
C:\>fastboot oem device-info
Yes it's popping up and down when it's booted in recovery mode whilst is stably connected when in fastboot mode but in this case I can't access the internal memory of the device.
I didn't get the purpose of logging the devices connecting to the USB as I can see the device connected for a while and correctly recognized as Redmi Note 8 pro but as it keeps popping out windows have no time to show it's folder.
As for the code you wrote: i will try asap but already tried with "fastboot devices" and I get the phone correctly listed but still can't access its memory as told.
Renate said:
If it's popping up and down you need something to keep track.
You can try my UsbLog.exe (in the sig), it just sits there and shows what devices appear (if they have a driver) and disappear.
Try these to see if anything is working:
Code:
C:\>fastboot devices
C:\>fastboot getvar all
C:\>fastboot oem device-info
Click to expand...
Click to collapse
After rebooting the phone in fastboot mode I can see it recognized as a generic android device from windows (still can't access the storage folder of the device).
fastboot devices----> I get the device listed with a series of numbers/letters
fastboot getvar all---> I get a list of information on token/token version/partition type and size/baseband/bootloader etc.
fastboot oem device-info----> FAILED (remote: unknown command)
So I think it's clear that the device is in Fastboot mode and instead is in a boot loop when started in revocery mode.
Is there a way to extract data from fastboot mode?
Thanks,
Andrea.
If you put a custom recovery on it in the first place you can try reflashing recovery from fastboot.
Fastboot doesn't allow you to read anything.
oem device-info is obviously an oem command that might not be on any device.
You've got a Mediatek processor. That has some low level equivalent to Qualcomm EDL, but I have no experience with that.
If you can get there you can download the user data partition, but it's probably encrypted. Also no experience with that.
The easiest is if you can get the system to mount/decrypt the partition.
You've tried the normal system too?
Is this A/B? Have you tried changing slots?
How much time does it stay up in recovery? Do you have ADB? Maybe try:
Code:
# stop recovery
Does that prevent it from looping?
So I should try to flash a custom recovery like TWRP for example?
What you mean with "normal system too"?
Changing slots you mean changing usb port?
It stays in recovery less than one second so I can't give any command via ADB.
EDIT: cant' flash any custom recovery because the bootloader is locked.
If I Try to unlock the bootloader via MiUnlock I get a warning saying that all data will be erased.
Any idea on how to unlock the bootloader wo wiping all the data?
Sephiroth79 said:
So I should try to flash a custom recovery like TWRP for example?
What you mean with "normal system too"?
Changing slots you mean changing usb port?
It stays in recovery less than one second so I can't give any command via ADB.
EDIT: cant' flash any custom recovery because the bootloader is locked.
If I Try to unlock the bootloader via MiUnlock I get a warning saying that all data will be erased.
Any idea on how to unlock the bootloader wo wiping all the data?
Click to expand...
Click to collapse
There is a mediatek bootloader unlocked you just have to boot in Brom mode and it'll unlock it please follow this
PS: press all buttons
MysticNoOb said:
There is a mediatek bootloader unlocked you just have to boot in Brom mode and it'll unlock it please follow this
PS: press all buttons
Click to expand...
Click to collapse
My bootloader is unlocked!
Thank you very much.
Now I am going to try to flash a custom recovery mode via fastboot in order to access the internal memory of the phone.
EDIT: I've just flashed twrp-3.6.2_9-0-begonia.img but still can't boot into recovery mode.
Any hint on how to extract data from the system now?
You really want to boot the normal system because that's the best way to get decrypted data.
I realized that you don't have ADB enabled there.
You should look at B. Kerler's https://github.com/bkerler/mtkclient/
If you can pull the boot image off your device then I might be able to fix it so that you have ADB.
You'd have to flash it back in fastboot or mtkclient.
You can also pull a copy of userdata off the device with mtkclient.
As far as booting into recovery, there's a way.
Here's how, if you don't have A/B (that is you flashed TWRP into recovery and not recovery_a or recovery_b)
then you can fastboot flash a special file into the misc partition and it wil boot into recovery next reboot.
To return things to normal you have to flash the empty file to the misc partition.
Code:
C:\>fastboot flash misc misc-rec.img
C:\>fastboot reboot
Only do this if you don't have partitions that end in _a or _b
I really don't know if I have partitions A and B as you mentioned and I think there's no way to check actually.
I confirm I don't have "USB Debugging" active on the phone.
So if I understand correctly I should do the following:
- Flash misc-reg.img via Fastboot
- Boot into recovery just rebooting the system after flashing the above file;
- use MTKclient to dump userdata or boot image to enable ADB on (I will need help with mtkclient I suppose).
Is it correct?
EDIT: flashed TWRP first and misc-rec then rebooted via Fastboot/Reboot but nothing happens.
Sephiroth79 said:
My bootloader is unlocked!
Thank you very much.
Now I am going to try to flash a custom recovery mode via fastboot in order to access the internal memory of the phone.
EDIT: I've just flashed twrp-3.6.2_9-0-begonia.img but still can't boot into recovery mode.
Any hint on how to extract data from the system now?
Click to expand...
Click to collapse
TWRP cant boot because you used wrong one. Search again in that unlock bootloader channel and use suitable one.
Kirasu2080 said:
TWRP cant boot because you used wrong one. Search again in that unlock bootloader channel and use suitable one.
Click to expand...
Click to collapse
Hmmm, I am almost sure that the TWRP I've flashed was listed under Redmi Note 8 pro page. Can you please indicate more precisely where should I sera
EDIT: I think I've downloaded and flashed the correct TWRP file.
@Renate can you please detail your method so I can try to extract data from the phone?
Sephiroth79 said:
Hmmm, I am almost sure that the TWRP I've flashed was listed under Redmi Note 8 pro page. Can you please indicate more precisely where should I sera
EDIT: I think I've downloaded and flashed the correct TWRP file.
@Renate can you please detail your method so I can try to extract data from the phone?
Click to expand...
Click to collapse
1/Yeah it's official. You "flashed correct TWRP." Downgrade to Miui Android 9 (_9 in it's name) to boot into that TWRP and lose your data.
2/In unlock bootloader video above, search other video in his channel playlist and find TWRP video suitable for your Miui version.
Kirasu2080 said:
1/Yeah it's official. You "flashed correct TWRP." Downgrade to Miui Android 9 (_9 in it's name) to boot into that TWRP and lose your data.
2/In unlock bootloader video above, search other video in his channel playlist and find TWRP video suitable for your Miui version.
Click to expand...
Click to collapse
Can't find the right video, can you kindly send me a link (I am on the latest Miui version and I am in Europe)?
In all the videos I've seen on his page he is using the device to install TWRP etc.
I think I just need the correct TWRP version for my MIUI release and then I'll flash TWRP and misc-reg.img. Is it right?
Sephiroth79 said:
Can't find the right video, can you kindly send me a link (I am on the latest Miui version and I am in Europe)?
In all the videos I've seen on his page he is using the device to install TWRP etc.
I think I just need the correct TWRP version for my MIUI release and then I'll flash TWRP and misc-reg.img. Is it right?
Click to expand...
Click to collapse
Use brp 3.5.2 v3.1 or V3.6 to decrypt Miui 12.5