Develop Bugs

BRICKED Galaxy Nexus - please help me restore/advice

Hi I attempted to root my phone, got SU but was having problems flashing any roms, using any apps that required /root or accessing recovery. Figured something might not have worked and tried to unroot and start again. All steps were followed via http://forums.androidcentral.com/ve...-root-unroot-unlock-your-vz-galaxy-nexus.html
I'm stuck in the Google bootscreen with my only other option being bootloader, it still says Locked State - Unlocked. But my computer can't see my phone, Odin doesn't work and I still don't have a definitive method of restoring my phone via a MAC.
This ISN'T Resolved. I get errors when attempting to fastboot the stock image
~/Desktop/adb-fastboot/adb reboot bootloader
brings about the following error
"error: device not found"
I was already in bootloader and tried:
~/Desktop/adb-fastboot/fastboot flash boot ~/Desktop/adb-fastboot/boot.img
I get:
error: cannot load '/Users/grnmons/Desktop/adb-fastboot/boot.img'
If anybody has any ideas please let me know, I really don't know what to do at this point.

grnmons said:
Hi I attempted to root my phone, got SU but was having problems flashing any roms, using any apps that required /root or accessing recovery. Figured something might not have worked and tried to unroot and start again. All steps were followed via http://forums.androidcentral.com/ve...-root-unroot-unlock-your-vz-galaxy-nexus.html
I'm stuck in the Google bootscreen with my only other option being bootloader, it still says Locked State - Unlocked. But my computer can't see my phone, Odin doesn't work and I still don't have a definitive method of restoring my phone via a MAC.
If anybody has any ideas please let me know, I really don't know what to do at this point. Plan B is to use a PC which I can only access later in the week. If you know someone, or have a link I would really appreciate it. Also ask me anything if it can help make this clearer.
Thanks
Click to expand...
Click to collapse
Okay your bootloader is unlocked which is good, but your MAC doesn't see your phone in bootloader mode?

grnmons said:
Plan B is to use a PC which I can only access later in the week.
Click to expand...
Click to collapse
Can you bootcamp or use a virtual machine?

grnmons said:
Hi I attempted to root my phone, got SU but was having problems flashing any roms, using any apps that required /root or accessing recovery. Figured something might not have worked and tried to unroot and start again. All steps were followed via http://forums.androidcentral.com/ve...-root-unroot-unlock-your-vz-galaxy-nexus.html
I'm stuck in the Google bootscreen with my only other option being bootloader, it still says Locked State - Unlocked. But my computer can't see my phone, Odin doesn't work and I still don't have a definitive method of restoring my phone via a MAC.
If anybody has any ideas please let me know, I really don't know what to do at this point. Plan B is to use a PC which I can only access later in the week. If you know someone, or have a link I would really appreciate it. Also ask me anything if it can help make this clearer.
Thanks
Click to expand...
Click to collapse
Wrong section..but
I would def use a PC and use Odin ! Make your life easier...it takes like 3-5 Mins..takes it to stock!
Sent from my Galaxy Nexus using xda premium

All you have to do is fastboot flash those stock images of 4.0.2 google gave us. There's not even any need for Odin. You can do this right on your Mac.
Sent from my Galaxy Nexus using Tapatalk

Please uninstall and reinstall your phones drivers. Your just soft bricked is all. Once your computer sees the device you should be good.
sent from the Almighty One himself....

borgey said:
All you have to do is fastboot flash those stock images of 4.0.2 google gave us. There's not even any need for Odin. You can do this right on your Mac.
Click to expand...
Click to collapse
I can't seem to figure out how to do that. Seems like that's what got me here in the first place, the mac version might be missing files I'm missing the steps to actually do that.
Can't find any forum/site/guide that tells me how to do that. Does anybody have this?

grnmons said:
I can't seem to figure out how to do that. Seems like that's what got me here in the first place, the mac version might be missing files I'm missing the steps to actually do that.
Can't find any forum/site/guide that tells me how to do that. Does anybody have this?
Click to expand...
Click to collapse
fastboot flash (google on how to use these)
you do them when you're in bootloader mode. you need to have a ADB/Fastboot environment set up (look at root guides and do step one of it..... verifying the part of getting the environment, ignore drivers)
stock images are here: http://code.google.com/android/nexus/images.html

zephiK said:
fastboot flash (google on how to use these)
you do them when you're in bootloader mode. you need to have a ADB/Fastboot environment set up (look at root guides and do step one of it..... verifying the part of getting the environment, ignore drivers)
stock images are here: http://code.google.com/android/nexus/images.html
Click to expand...
Click to collapse
Thanks. Can you confirm that these are the steps?
1) Download the latest stock image( i will leave finding that image to you since this post can become outdated)
2) Unzip the files, and place the images into the adb-fastboot folder you created on your desktop above.
3) Open a terminal and use the following commands:
Code:
~/Desktop/adb-fastboot/adb reboot bootloader
4) Wait for bootloader to reboot on phone.
5) Then, in terminal use the following commands:
~/Desktop/adb-fastboot/fastboot flash boot ~/Desktop/adb-fastboot/boot.img
~/Desktop/adb-fastboot/fastboot flash system ~/Desktop/adb-fastboot/system.img
~/Desktop/adb-fastboot/fastboot flash recovery ~/Desktop/adb-fastboot/recovery.img
~/Desktop/adb-fastboot/fastboot flash userdata ~/Desktop/adb-fastboot/userdata.img
~/Desktop/adb-fastboot/fastboot erase cache
~/Desktop/adb-fastboot/fastboot oem lock
6) Reboot to System, and you should be returned to Stock and Unrooted

~/Desktop/adb-fastboot/adb reboot bootloader
brings about the following error
"error: device not found"
I was already in bootloader and tried:
~/Desktop/adb-fastboot/fastboot flash boot ~/Desktop/adb-fastboot/boot.img
I get:
error: cannot load '/Users/grnmons/Desktop/adb-fastboot/boot.img'

anybody have any other suggestions to this? or a follow up?

It should be easy to fix. You do not seem to have the correct driver installed.
Sent from my Galaxy Nexus using xda premium

Understood, I think I definitely did a few things wrong here. But my problem requires some kind of steps to solve. I don't mean to sound lazy but I've been running around the forums for awhile and I'm in way over my head, I was hoping someone could just list a few steps, links, SOMETHING. I'm looking for solvency here.

grnmons said:
Understood, I think I definitely did a few things wrong here. But my problem requires some kind of steps to solve. I don't mean to sound lazy but I've been running around the forums for awhile and I'm in way over my head, I was hoping someone could just list a few steps, links, SOMETHING. I'm looking for solvency here.
Click to expand...
Click to collapse
reinstall the android sdk from here that will get your drivers in order so your computer can see your phone
then fastboot flash recovery
then manually flash su (attached)

ogdobber said:
reinstall the android sdk from here that will get your drivers in order so your computer can see your phone
then fastboot flash recovery
then manually flash su (attached)
Click to expand...
Click to collapse
Thanks muchly, I feel like I'm getting closer but could you elaborate on the manual flash su step? My **** is all over the place now, my desktop is littered with files, should I be in recovery for this or still fastboot? and what is the command if you have?

grnmons said:
Thanks muchly, I feel like I'm getting closer but could you elaborate on the manual flash su step? My **** is all over the place now, my desktop is littered with files, should I be in recovery for this or still fastboot? and what is the command if you have?
Click to expand...
Click to collapse
download the gnex-su.zip and put in in the root of your sd card. then in recovery select "-install zip from sdcard" then "-choose zip from sdcard" then select the gnex-su.zip. this will give you root and install the superuser app

not to get ahead (previous post), but after your computer recognizes the phone you need to flash clockwork recovery
you need to open a terminal in the platform-tools folder of the sdk (also put the recovery.img there) and then
Code:
fastboot flash recovery name-of-recovery.img

Thanks for your help ogdobber, I'm incredibly frustrated and you must be too trying to help me, but I must have done something wrong as after I flash recovery, i still cannot access it - it continues to hang out in the Google screen.
Let me go through my steps with you and you tell me what I might have done wrong. So with my bricked phone, 1. I clicked your link and updated my SDK.
There's no indication that I did anything right here, it just shows that everything is installed and that's all I think I need here.
2. Opened up terminal fastboot flash boot (in this case) bootloader-toro-primekk15.img DONE!
3. Fastboot flash recovery (in this case) recovery-clockwork-5.0.2.0-crespo.img
DONE!
Then... nothing. Recovery doesn't load for me. Just get a boot loop. Anything I might have done wrong prior or inbetween these steps? Also, besides flashing and running commands off terminal - i assume this is considered computer recognizes my phone. Could the problem be there?
Just got your last post, I'm unfamiliar with SDK but I've since put the recovery file in there, not sure how to flash recovery. I have tried flashing recovery through terminal and surprisingly it says "-bash: fastboot: command not found"

grnmons said:
Thanks for your help ogdobber, I'm incredibly frustrated and you must be too trying to help me, but I must have done something wrong as after I flash recovery, i still cannot access it - it continues to hang out in the Google screen.
Let me go through my steps with you and you tell me what I might have done wrong. So with my bricked phone, 1. I clicked your link and updated my SDK.
There's no indication that I did anything right here, it just shows that everything is installed and that's all I think I need here.
2. Opened up terminal fastboot flash boot (in this case) bootloader-toro-primekk15.img DONE!
3. Fastboot flash recovery (in this case) recovery-clockwork-5.0.2.0-crespo.img
DONE!
Then... nothing. Recovery doesn't load for me. Just get a boot loop. Anything I might have done wrong prior or inbetween these steps? Also, besides flashing and running commands off terminal - i assume this is considered computer recognizes my phone. Could the problem be there?
Click to expand...
Click to collapse
that is for the nexus s
check your pm

ogdobber said:
that is for the nexus s
check your pm
Click to expand...
Click to collapse
If you are still having problems ...like I said before ...use Odin......since the simple process of fastboot is not working properly for you.Odin makes things so Much easier
Sent from my Galaxy Nexus using xda premium

I think I may have ruined my phone

Hey there
I want to start off by saying I have very little experience with rooting, but am very familiar with jailbreaking apple devices so I figured i could manage.
I have a htc one m8 on rogers network locked. I rooted it and had super user and all that jazz, then flashed AOKP. Then I thought i actually liked the stock HTC sense better, so I tried to "get things back to normal"...lol.
Now im at the point where if i turn my phone on it goes straight to the fastboot screen(?) with all the "fast boot, recovery, factory reset, etc". Since I'm super new to all of this is there anybody that can write some instructions on how to get my phone back to stock? I would really appreciate it after panicking over this for 3 days.
Edit: In the fastboot screen at the top it says ***Tampered*** ***Relocked*** ***security warning**
also when i try to press recovery it shows the htc screen for 1 second then back to the same menu
i found this http://forum.xda-developers.com/showthread.php?t=2710735 but i cannot even get into recovery

haydenrbm said:
Hey there
I want to start off by saying I have very little experience with rooting, but am very familiar with jailbreaking apple devices so I figured i could manage.
I have a htc one m8 on rogers network locked. I rooted it and had super user and all that jazz, then flashed AOKP. Then I thought i actually liked the stock HTC sense better, so I tried to "get things back to normal"...lol.
Now im at the point where if i turn my phone on it goes straight to the fastboot screen(?) with all the "fast boot, recovery, factory reset, etc". Since I'm super new to all of this is there anybody that can write some instructions on how to get my phone back to stock? I would really appreciate it after panicking over this for 3 days.
Click to expand...
Click to collapse
While being an expert with rooting and flashing custom recoveries on Samsung devices, I am also new to the world of HTC. Out of curiosity, what happens when you hit factory reset?

Unlock the boot loader again then install twrp recovery then head over to the stock backup thread and flash one of the nandroids for your cid.

MattMJB0188 said:
While being an expert with rooting and flashing custom recoveries on Samsung devices, I am also new to the world of HTC. Out of curiosity, what happens when you hit factory reset?
Click to expand...
Click to collapse
When i hit factory reset it the screen changes to the HTC in green for 1 second then back to where i started
ashyx said:
Unlock the boot loader again then install twrp recovery then head over to the stock backup thread and flash one of the nandroids for your cid.
Click to expand...
Click to collapse
I would...but when im trying to use ADB devices it isn't found

haydenrbm said:
When i hit factory reset it the screen changes to the HTC in green for 1 second then back to where i started
I would...but when im trying to use ADB devices it isn't found
Click to expand...
Click to collapse
Do fastboot devices ... adb commands itself won't work in bootloader, it has to be fastboot commands.

now you have a locked bootloader which means you cant do anything.. so your first step is to unlock it again then flash a custom recovery (TWRP) after that flash the stock rom+ boot.img ( to be safe) make sure it boots. RELOCK the bootloader then flash your firmware.zip.. hope it helps

mushages said:
now you have a locked bootloader which means you cant do anything.. so your first step is to unlock it again then flash a custom recovery (TWRP) after that flash the stock rom+ boot.img ( to be safe) make sure it boots. RELOCK the bootloader then flash your firmware.zip.. hope it helps
Click to expand...
Click to collapse
How can I unlock the bootloader again without the device showing in adb?

haydenrbm said:
How can I unlock the bootloader again without the device showing in adb?
Click to expand...
Click to collapse
i think you have your unlock token. start from here
http://www.htcdev.com/bootloader/unlock-instructions/page-4/

haydenrbm said:
How can I unlock the bootloader again without the device showing in adb?
Click to expand...
Click to collapse
If it's in bootloader it should show in command prompt when you type fastboot devices after connecting it to PC. If it doesn't then there is a driver problem perhaps. Check to make sure you have HTC drivers installed, or reinstall them. Might as well make sure adb is up to date as well, can do that through the Android SDK Manager. Another possibility might be that the usb cable isn't working correctly, try another cable. Fact of the matter though is, if it's in bootloader and you connect it to the PC adb/fastboot SHOULD pick it up.
So check and fix those things. Also make sure you use the correct commands, in bootloader mode, it'll be fastboot commands, not "adb devices" but "fastboot devices" ... "fastboot reboot" etc etc. Also make sure you're running the commands from within the adb/fastboot folder path(just for in case yeah...)

mushages said:
i think you have your unlock token. start from here
Click to expand...
Click to collapse
Okay it is unlocked, but now it just stays on the AOKP boot screen
Thank you for the help btw, it must be very painful.

haydenrbm said:
Okay it is unlocked, but now it just stays on the AOKP boot screen
Thank you for the help btw, it must be very painful.
Click to expand...
Click to collapse
Press Volume UP + Power button, once the screen goes dead, press Volume DOWN + Power button to get back into bootloader. Then flash a custom recovery (Like TWRP) and start flashing the Stock nandroid backups, can be found from here Collection of Stock backups

BerndM14 said:
Press Volume UP + Power button, once the screen goes dead, press Volume DOWN + Power button to get back into bootloader. Then flash a custom recovery (Like TWRP) and start flashing the Stock nandroid backups, can be found from here Collection of Stock backups
Click to expand...
Click to collapse
Okay i have got into the bootloader now, thanks.
I cannot put the rom into the internal storage because my computer wont detect the phone

haydenrbm said:
Okay i have got into the bootloader now, thanks.
the adb devices will show it if i have it in recovery mode but not bootloader, why is that ?
Click to expand...
Click to collapse
You didn't read any of my posts about that, did you? lol
I already stated adb commands like "adb devices" "adb reboot" etc will NOT work in bootloader, it'll work in the system and yes, it'll work in recovery for sideloading etc, but NOT in bootloader. For bootloader you HAVE to use fastboot commands, "fastboot devices" "fastboot reboot" "fastboot oem lock" "fastboot oem get_identifier_token" "fastboot flash unlocktoken Unlock_code.bin" etc etc

BerndM14 said:
You didn't read any of my posts about that, did you? lol
I already stated adb commands like "adb devices" "adb reboot" etc will NOT work in bootloader, it'll work in the system and yes, it'll work in recovery for sideloading etc, but NOT in bootloader. For bootloader you HAVE to use fastboot commands, "fastboot devices" "fastboot reboot" "fastboot oem lock" "fastboot oem get_identifier_token" "fastboot flash unlocktoken Unlock_code.bin" etc etc
Click to expand...
Click to collapse
Sorry I skipped past your first response, that makes sense now.
So I need to put the rom on my internal storage then go into recovery and install the zip using TWRP..but when I plug my phone into the computer the internal storage wont show up.
I do have sync manager installed also, and it wont show up in that either

haydenrbm said:
Okay i have got into the bootloader now, thanks.
I cannot put the rom into the internal storage because my computer wont detect the phone
Click to expand...
Click to collapse
With that adb devices command again in bootloader? Did you flash TWRP yet? If so, Got to Advanced >>> ADB Sideload >>> Swipe to start sideload.
Place the ROM.zip file in your adb folder then:
Connect phone to PC, while still in recovery mode type adb devices to make sure your device gets picked up, should show you the serial number for device AS WELL as "sideload" next to it, if so then you are hooked up right. Next type adb sideload name_of_zip.zip wait until fully finished.
If sideload fails for one or other reason you can also try to push it. Reboot to recovery again, type adb devices to make sure device gets picked up, type adb push name_of_zip.zip /data/media/0/ or adb push name_of_zip.zip /sdcard/ flash as per usual then.
Yet somehow I don't think you even need to go to these steps

BerndM14 said:
With that adb devices command again in bootloader? Did you flash TWRP yet? If so, Got to Advanced >>> ADB Sideload >>> Swipe to start sideload.
Place the ROM.zip file in your adb folder then:
Connect phone to PC, while still in recovery mode type adb devices to make sure your device gets picked up, should show you the serial number for device AS WELL as "sideload" next to it, if so then you are hooked up right. Next type adb sideload name_of_zip.zip wait until fully finished, once done reboot back into recovery and flash rom.
If sideload fails for one or other reason you can also try to push it. Reboot to recovery again, type adb devices to make sure device gets picked up, type adb push name_of_zip.zip /data/media/0/ or adb push name_of_zip.zip /sdcard/ flash as per usual then.
Yet somehow I don't think you even need to go to these steps
Click to expand...
Click to collapse
haha..thank you for baby steps
The sideload completed and i rebooted then went back into recovery and install but there isn't a zip file anywhere
Edit: wow..some how i reset it and it turned on and got into the phone... and now it connects to the computer so i should be able to follow the other tutorial now...man you are a life saver thank you so much

haydenrbm said:
haha..thank you for baby steps
The sideload completed and i rebooted then went back into recovery and install but there isn't a zip file anywhere
Edit: wow..some how i reset it and it turned on and got into the phone... and now it connects to the computer so i should be able to follow the other tutorial now...man you are a life saver thank you so much
Click to expand...
Click to collapse
I made a small mistake with the sideload though, it actually installs automatically as such you don't have to go back into recovery to flash, as it did it already, sorry. Edited post to fix.
Well as long as you can get into phone now to copy the nandroid backup to the phone all should be in order, can flash back stock from the nandroid then.
Glad it worked out then.:good:

BerndM14 said:
I made a small mistake with the sideload though, it actually installs automatically as such you don't have to go back into recovery to flash, as it did it already, sorry. Edited post to fix.
Well as long as you can get into phone now to copy the nandroid backup to the phone all should be in order, can flash back stock from the nandroid then.
Glad it worked out then.:good:
Click to expand...
Click to collapse
Hello BerndM14, thank you for this baby steps. Mine m8 is a gpe version, it's 4.4.2 google rom, rooted, cwm recovery, s-on. I was trying to flash the full google 4.4.3 zip rom under recovery, however, after that, my m8 automaticlly enter recovery everytime reboot. And I can manually enter the bootloader, my pc can find the m8 both in recovery and bootloader. I searched this post, and do it accordingly, I download the gpe stock backup KOT49H.H16 - 1.16.1700.16 - CWM Philz touch and use adb sideload gpe3.zip to the cell phone sucessfully, then the recovery automaticlly starts installing rom, then, I got below message:
-- Erasing & formatting /system as ext4 (Unmounted system)
system partition formatted!
-- Mounting system partition for writing
Writing rom system to system partition
Rom system written successfully!
@symlinking and permissions
--Creating toolbox symlinks
--creating additional symlinks
Symlinks Set!
--installing busybox
Set_perm: some changes failed
E:Error in /tmp/update.zip
(status 7)
installation aborted.
Install from sideload complete.
then, I reboot it manually. problem still there, still enter the recovery automaticlly.
do you have any comments on this? please.
thanks,

[20.2.2015][Root and stay with stock recovery]

Hello Yu Yureka fans!!!
This for the Yu Yureka fans who want to root the phone but don't want to miss OTA update by flashing custom recovery
In this thread i will tell you how to ROOT your Yu Yureka without flashing custom recovery.
This method will not flash custom recovery over stock recovery, this will just boot the custom recovery once just to flash the superuser.zip. so you will be back to stock recovery after flashing superuser.zip.
So lets get started...
Your Bootloader should be UNLOCKED
Files you need:
1. adb and fastboot drivers
2. A CWM recovery link (don't worry we wont flash it, it is just needed to install superuser.zip)
3. Superuser.zip link (save this in your sd card or internal memory)
Note: Keep recovery.img file in the same folder where adb and Fastboot drivers are placed and always open command window from that folder.
Connect your phone to pc via data cable
Steps:
1. Open command window (cntl+shift+right click)
2. Type
Code:
adb devices
if your device is connected you will get it in connected devices
3. Type
Code:
adb reboot-bootloader
4. Type
Code:
fastboot -i 0x1ebf boot recovery-yu.img
now your device will boot into recovery mode
5. Select install zip from sd and navigate where you have downloaded the superuser.zip and select install.
6. Done!!! Your device is rooted and you are still in stock recovery :good: you wont miss the OTA
To check if you are in stock recovery just reboot into recovery :good:
Hit thanks if this helped :good:

This isn't yours, You copied it from YuPlayGodForums, from DoomLord's post...

N'ayam Amarsh'e said:
This isn't yours, You copied it from YuPlayGodForums, from DoomLord's post...
Click to expand...
Click to collapse
First i am not a user of yuplaygod forums,
Second its not copied
Third you have no right to point at someone without any valid reason
Lastly stop spamming my post (read xda forum rules first you visit it here --> http://forum.xda-developers.com/announcement.php?f=3861)

@aashking
You can't boot the recovery image on locked bootloader; we have covered this fact already.
http://forum.xda-developers.com/showpost.php?p=58628082&postcount=12

Titokhan said:
@aashking
You can't boot the recovery image on locked bootloader; we have covered this fact already.
http://forum.xda-developers.com/showpost.php?p=58628082&postcount=12
Click to expand...
Click to collapse
@Titokhan yeah dude thanks for reminding i will update the OP :good:

Unable to get the 3rd command working. It keeps waiting for the device and the device reboots in normal mode. What am I doing wrong?

jitendragarg said:
Unable to get the 3rd command working. It keeps waiting for the device and the device reboots in normal mode. What am I doing wrong?
Click to expand...
Click to collapse
Reinstall ADB Drivers
adbdriver.com

N'ayam Amarsh'e said:
Reinstall ADB Drivers
adbdriver.com
Click to expand...
Click to collapse
Thanks, will check. Although I downloaded the drivers just today, so not sure, how it is not up to date. Anyway, will check it once I am home in 3 hours.

tried resintalling the drivers. didn't help. command prompt still keeps on waiting for device forever, while phone is in fastboot mode.
Edit:
If I cancel the third command, and check the list again, phone is not listed. Somehow, after rebooting into bootloader, phone stops the adb connection.

i am on twrp recovery can i flash this recovery on that and update the new ota?
please help

Help I bricked my Oneplus 3

Hi, i played around with my new OP3, and i wanted to root it. Since i'm noob at rooting, it went wrong. (i did it with twrp)
So first it just went in to bootloop, then i was still able to get to rcovery and stuff, but i followed a guide to fix bootloop, and that ****ed it even more up. The guide i followedet told me to use "OnePlus3_Unbrick_Tool"
After using "OnePlus3_Unbrick_Tool", i now cant even go into recovery anymore, the only thing i can do is go to bootloader, but when i'm in bootloader now, it wont connect proberly, so that i can use "flash twrp", so that i can use twrp recovery.
Also when i try to boot it, it because of "OnePlus3_Unbrick_Tool" goes into something, where it says "md5 checksum failed", and then restarts and does it again and again.....
I hope it's not bricked forever, pls help ))

have you tried re-flashing the stock or twrp recovery with adb sideload command?
if not give it a shot, it might work.

bonham1988 said:
have you tried re-flashing the stock or twrp recovery adb sideload command?
Click to expand...
Click to collapse
And how do you say I do that? I have tried using the "tool all in one", where you han flash both stock and twrp, but it doesnt seem to do anything, when i press them (and the device is in bootloader)

Godeske said:
And how do you say I do that? I have tried using the "tool all in one", where you han flash both stock and twrp, but it doesnt seem to do anything, when i press them (and the device is in bootloader)
Click to expand...
Click to collapse
Just boot into bootloader mode and through command prompt check if your phone is detected by typing fastboot devices. If its detected then you flash a new recovery again. Forget the toolkit, just look for instructions on how to install a custom recovery.
Sent from my OnePlus3 using XDA Labs

bonham1988 said:
Just boot into bootloader mode and through command prompt check if your phone is detected by typing fastboot devices. If its detected then you flash a new recovery again. Forget the toolkit, just look for instructions on how to install a custom recovery.
Sent from my OnePlus3 using XDA Labs
Click to expand...
Click to collapse
Okay i've tried that now, and it wont allow me unlock my bootloader from command prompt, and i cant do the flash while it's locked.. what to do?

Godeske said:
Okay i've tried that now, and it wont allow me unlock my bootloader from command prompt, and i cant do the flash while it's locked.. what to do?
Click to expand...
Click to collapse
In fastboot mode, did you manage to find your device on the computer? On Linux this is "sudo fastboot devices", on Windows it should be roughly similar.

simthadim said:
In fastboot mode, did you manage to find your device on the computer? On Linux this is "sudo fastboot devices", on Windows it should be roughly similar.
Click to expand...
Click to collapse
When im in fastboot mode in the bootloader, i can only find it in "device manager" as "marshall london device -> marshall london bootloader interface"

Godeske said:
When im in fastboot mode in the bootloader, i can only find it in "device manager" as "marshall london device -> marshall london bootloader interface"
Click to expand...
Click to collapse
Might seem a silly question but what phone are you using? If it is a OnePlus3 have you installed the correct drivers?

ghostofcain said:
Might seem a silly question but what phone are you using? If it is a OnePlus3 have you installed the correct drivers?
Click to expand...
Click to collapse
Pretty sure i have, but i have booked a session with oneplus costumer service now, so that they do it for me live lololol

bonham1988 said:
have you tried re-flashing the stock or twrp recovery with adb sideload command?
if not give it a shot, it might work.
Click to expand...
Click to collapse
Hey bonham,
The same thing happened to me but when I try to sideload it says I need 1.0.32 or higher to sideload this device
What should I do?

gavintoronto2016 said:
Hey bonham,
The same thing happened to me but when I try to sideload it says I need 1.0.32 or higher to sideload this device
What should I do?
Click to expand...
Click to collapse
Adb version is outdated. Just download the latest ones.
Sent from my OnePlus3 using XDA Labs

Hey guys, if there are some of you, who knows a lot about this, would you like to answer this comment? Idk maybe we could use teamviewer to help me or something

simthadim said:
In fastboot mode, did you manage to find your device on the computer? On Linux this is "sudo fastboot devices", on Windows it should be roughly similar.
Click to expand...
Click to collapse
Ohh i think i understand your question. YEs in command prompt I am able to find the device, it is connected.
(do you know a lot about this, maybe you could teamview me to help?))

Godeske said:
Ohh i think i understand your question. YEs in command prompt I am able to find the device, it is connected.
(do you know a lot about this, maybe you could teamview me to help?))
Click to expand...
Click to collapse
Hey!
I'm not the expert but I have played with my 1+3 enough to have some knowledge.
First of all, do not use "all in one tools", those do not put you in control.
Cool, so fastboot is detected, though you can't get into the recovery?
Step 1) make sure you have the latest version of "fastboot" and "adb" (Android Debug Bridge) and unlock the bootloader. This tread should be helpfull: http://forum.xda-developers.com/oneplus-3/how-to/oneplus-3-how-to-unlock-bootloader-t3398733
You need to do this, because otherwise we will not be able to proceed (i.e. the phone is to be 'unlocked' for what we are about to do).
Step 2) If you are ready than let's flash a new recovery (TWRP):
This is also step 2 in the thread mentioned above. Very important: "Once the flash has completed, Don't use the "Fastboot Reboot" Command Instead Unplug Your phone then Manually boot it into recovery by keeping Power + Volume Down button pressed."
So once you have flashed a new recovery using fastboot, than you should reboot your phone into the new recovery!
step 3)
Once in the new recovery (TWRP) go to advanced and to ADB sideload. Make sure your computer detects your device with the command "adb devices" and flash a new ROM. Just for simplicity use the official OOS 3.2.4.
This should do the trick. Before you go and try make sure you understand EVERYTHING I have written. Let me know if you have questions.

simthadim said:
Hey!
I'm not the expert but I have played with my 1+3 enough to have some knowledge.
First of all, do not use "all in one tools", those do not put you in control.
Cool, so fastboot is detected, though you can't get into the recovery?
Step 1) make sure you have the latest version of "fastboot" and "adb" (Android Debug Bridge) and unlock the bootloader. This tread should be helpfull: http://forum.xda-developers.com/oneplus-3/how-to/oneplus-3-how-to-unlock-bootloader-t3398733
You need to do this, because otherwise we will not be able to proceed (i.e. the phone is to be 'unlocked' for what we are about to do).
Step 2) If you are ready than let's flash a new recovery (TWRP):
This is also step 2 in the thread mentioned above. Very important: "Once the flash has completed, Don't use the "Fastboot Reboot" Command Instead Unplug Your phone then Manually boot it into recovery by keeping Power + Volume Down button pressed."
So once you have flashed a new recovery using fastboot, than you should reboot your phone into the new recovery!
step 3)
Once in the new recovery (TWRP) go to advanced and to ADB sideload. Make sure your computer detects your device with the command "adb devices" and flash a new ROM. Just for simplicity use the official OOS 3.2.4.
This should do the trick. Before you go and try make sure you understand EVERYTHING I have written. Let me know if you have questions.
Click to expand...
Click to collapse
Thank you, but i have not enabled "allow oem unlocking" in the developer settings when the phone worked, so i get a error message "FAILED (remote: oem unloc is not allowed)
What to do to unlock it then?

Bro, download 3.2.4 oos rom zip file from official link. Its around 1.3 GB. Just connect ur OP3 to computer. It will detect as MTP device.Im my computer it was in the name of RAIN Transfer the zip file to internal storage. Wipe cache. And select install option in TWRP and select the zip file u pushed and flash it. Best of luck..

jaganmohans said:
Bro, download 3.2.4 oos rom zip file from official link. Its around 1.3 GB. Just connect ur OP3 to computer. It will detect as MTP device.Im my computer it was in the name of RAIN Transfer the zip file to internal storage. Wipe cache. And select install option in TWRP and select the zip file u pushed and flash it. Best of luck..
Click to expand...
Click to collapse
Bro, if just it were that simple, but it's not.. It doesn't find the phone in my computer...

simthadim said:
Hey!
I'm not the expert but I have played with my 1+3 enough to have some knowledge.
First of all, do not use "all in one tools", those do not put you in control.
Cool, so fastboot is detected, though you can't get into the recovery?
Step 1) make sure you have the latest version of "fastboot" and "adb" (Android Debug Bridge) and unlock the bootloader. This tread should be helpfull: http://forum.xda-developers.com/oneplus-3/how-to/oneplus-3-how-to-unlock-bootloader-t3398733
You need to do this, because otherwise we will not be able to proceed (i.e. the phone is to be 'unlocked' for what we are about to do).
Step 2) If you are ready than let's flash a new recovery (TWRP):
This is also step 2 in the thread mentioned above. Very important: "Once the flash has completed, Don't use the "Fastboot Reboot" Command Instead Unplug Your phone then Manually boot it into recovery by keeping Power + Volume Down button pressed."
So once you have flashed a new recovery using fastboot, than you should reboot your phone into the new recovery!
step 3)
Once in the new recovery (TWRP) go to advanced and to ADB sideload. Make sure your computer detects your device with the command "adb devices" and flash a new ROM. Just for simplicity use the official OOS 3.2.4.
This should do the trick. Before you go and try make sure you understand EVERYTHING I have written. Let me know if you have questions.
Click to expand...
Click to collapse
Hey i have the same problem but this fix does not work for me.
So I have the bootloader unlocked and I can enter the bootload and my computer detects my device which is nice.
when I flash twrp on my phone trough CMD it doesnt work, my PC tells me that everything is okay but my phone will not boot into twrp and instead it will give me weird errors.
---------- Post added at 03:31 PM ---------- Previous post was at 02:56 PM ----------
this fix worked for me,
On the screen when the phone failed to md5 checksum, you've got several partition failed right? in red text.
- download this : https://www.androidfilehost.com/?fid=24591000424942573
and then extract.
- download platform tools attached below. extract in the same folder with first file you've downloaded.
- Boot your phone to fastboot mode, plug your usb, make sure adb and fastboot driver are installed.
- on the folder, hold shift and right click, click open command here
- type fastboot devices
- make sure your serial number appear.
- now flash the img of the missing file according to the partition in red text on your ms5 checksum failed one by one.
- e.g. "fastboot flash boot_aging boot_aging.img.
- make sure you flash all the missing partition.
- type fastboot reboot.
this will boot you to oos 3.1.2.
unfortunately I couldn't extract the newest oos dat. data. but you could always take the OTA
goodluck mate. sorry for my english

Godeske said:
Bro, if just it were that simple, but it's not.. It doesn't find the phone in my computer...
Click to expand...
Click to collapse
Hmm bad try installing all op3 drivers and see whether phone is detected or not. I was in the same situation previously. Pushing zip through adp terminal is painful process. I got device offline first,after solving that i got service not recognized issue. For solving that usb debugging needs to be enabled i stuck in that step.

can you enter recovery trough fastboot mode? I.e. if you are in fastboot mode you van use the volume keys to select recovery.
100% sure you can't enter recovery?
you can try Fast and pro's option. let us know!

Oneplus 3 Boot Loop

So I tried to flash another rom by flashing TWRP and unlocking the bootloader, which worked and I then had installed Freedom Os. Then I locked the Bootloader to get the Message away, but know when you charge it or turn it on it is in an boot loop which repeats the Oneplus Logo what you normally see, but very short and after that it bobrates turns the screen off and it atart again. Or I can go into fastboot mode, but when I try to go into the recovery, it goes into the Boot Loop again. Is there a way to get the Original OS back? Ive already dopwnloaded it but I cant get in on there. Can you tell me how to fix it on my own?

[GUIDE] Mega Unbrick Guide for A Hard Bricked OnePlus 3 > METHOD 1

If you can access fastboot mode, connect the phone to a PC, then go to ADB and erase recovery using the command " fastboot erase recovery" and install TWRP 3.0.4-1 using the command " <fastboot flash recovery <recovery.zip/img> again.
Once you do that, boot into TWRP, go to wipe and wipe everything. Once you do that, transfer the stock OOS into the internal memory using copy-paste , then go to install , select the transferred file to install the OS or else go to advance setting in TWRP and select adb sideload and use the command "adb sideload <filename.zip>".
This should install the OS on the phone.
If you want to go complete stock, then you also need to install the stock recovery. Search the forum to get the relevent files or else you can download it from the OnePlus website and later on update to latest OS via OTA.
NEVER EVER LOCK THE BOOTLOADER , IF YOU'RE USING ANY ROM OTHER THAN STOCK OS AND STOCK RECOVERY

anup807 said:
If you can access fastboot mode, connect the phone to a PC, then go to ADB and erase recovery using the command " fastboot erase recovery" and install TWRP 3.0.4-1 using the command " <fastboot flash recovery <recovery.zip/img> again.
Once you do that, boot into TWRP, go to wipe and wipe everything. Once you do that, transfer the stock OOS into the internal memory using copy-paste , then go to install , select the transferred file to install the OS or else go to advance setting in TWRP and select adb sideload and use the command "adb sideload <filename.zip>".
This should install the OS on the phone.
If you want to go complete stock, then you also need to install the stock recovery. Search the forum to get the relevent files or else you can download it from the OnePlus website and later on update to latest OS via OTA.
NEVER EVER LOCK THE BOOTLOADER , IF YOU'RE USING ANY ROM OTHER THAN STOCK OS AND STOCK RECOVERY
Click to expand...
Click to collapse
Can you tell me how to go to adb? When doing it while being in fastboot I get the error "remote: Partition erase is not allowed"

revedar said:
Can you tell me how to go to adb? When doing it while being in fastboot I get the error "remote: Partition erase is not allowed"
Click to expand...
Click to collapse
Download Universal ADB software, download the latest version and install it.
TWRP 3.0.4-1
Official Oxygen OS 4.0.3
Official Recovery
Connect your phone to the PC and then navigate to installed folder, right click holding SHIFT key and select "Open command window here"
Inside command window type
adb devices
If all the drivers are installed properly, you should see you're device ID here.
then type
adb reboot bootloader
your phone will enter fastboot mode.
then type
fastboot devices
again you should see you're device ID here.
then follow the instruction , i've given earlier.

anup807 said:
Download Universal ADB software, download the latest version and install it.
TWRP 3.0.4-1
Official Oxygen OS 4.0.3
Official Recovery
Connect your phone to the PC and then navigate to installed folder, right click holding SHIFT key and select "Open command window here"
Inside command window type
adb devices
If all the drivers are installed properly, you should see you're device ID here.
then type
adb reboot bootloader
your phone will enter fastboot mode.
then type
fastboot devices
again you should see you're device ID here.
then follow the instruction , i've given earlier.
Click to expand...
Click to collapse
So i've downloaded the software, installed the driver and typed in cmd adb devices "adb devices List of devices attached" is returned, so it seems like there is going something wrong. Is it because the Driver is installed wrong or because "target reported max download size of 440401920 bytes
sending 'recovery' (22605 KB)...
OKAY [ 0.528s]
writing 'recovery'...
FAILED (remote: Partition flashing is not allowed)
finished. total time: 0.551s"
This is returned when trying to flash. Do I have to be in fastboot mode or something else to be able to follow your instructions? In Fast Boot is written that the Device State is locked and Secure Boot is enabled. I messaged Oneplus and hope they have a solution which can just unlock the Bootloader when being in fastboot mode, so everything is fine again. I hope you can help me, but I still wanna say thank your for now

Errr... fastboot can unlock the bootloader. fastboot oem unlock

emuandco said:
Errr... fastboot can unlock the bootloader. fastboot oem unlock
Click to expand...
Click to collapse
Thank you, but it dont works because i forgot to re-enable the oem modification and usb debugging in freedom os, maybe there is an option to do this without having this enabled but I didnt found it. So I wait for a helpful answer from somebody here or from Oneplus, I consider sending my smartphone to oneplus to let them repair it if I cant do it. Just saying that modding an S3, Asus transformer pad and nvidia shield is way easier.

never ever relock your bootloader while you in custom OS

oopstairs said:
never ever relock your bootloader while you in custom OS
Click to expand...
Click to collapse
Thank you for not helping me

revedar said:
Thank you for not helping me
Click to expand...
Click to collapse
Yeah I'm sorry I can't help you in your case. I'm just stating the fact. Sorry if I offended you.

Shouldn't it still be possible to reflash the properly signed official updates? TBH I never had such a problem and thus never had to cope with it. Same with recovery: http://oxygenos.oneplus.net.s3.amazonaws.com/recovery_op3.img Try flashing this one with fastboot. It's the official one. By flashing this one you might fix your stuff over adb sideloading the official full update zips.

Try the unbrick guide provided in the 2nd post to your query. It should definitely help. Better contact OnePlus tech2 support and they'll flash your phone for you. They're really helpful.

emuandco said:
Shouldn't it still be possible to reflash the properly signed official updates? TBH I never had such a problem and thus never had to cope with it. Same with recovery: http://oxygenos.oneplus.net.s3.amazonaws.com/recovery_op3.img Try flashing this one with fastboot. It's the official one. By flashing this one you might fix your stuff over adb sideloading the official full update zips.
Click to expand...
Click to collapse
I already tried to do this, but the console returns something like permission denied.

anup807 said:
Try the unbrick guide provided in the 2nd post to your query. It should definitely help. Better contact OnePlus tech2 support and they'll flash your phone for you. They're really helpful.
Click to expand...
Click to collapse
The MSM Software disconnects the smartphone while the process works

U cannot flash in adb while the bootloader is locked, u can not unlock the bootloader unless u can access ur OS, I am not sure y people was trying to get u to flash via fastboot the answer was provided to u in the 2nd post

^^^ This!
It's pretty much obvious fastboot flash will not work with a locked bootloader.
It's pretty obvious unlocking the bootloader will not work, while one can not access the OS.
Unbrick tool is the only option to bring it back to life, or sending it for RMA. If unbrick tool fails, try using different drivers and make sure it is connected with the stock cable (I've only tried with a Nilkin cable besides the stock one, which always failed at different stages during the process).
Not even sure drivers must be installed manually, I've never done that myself on Windows 10, as they were automatically installed (3 different's PC's, both on x86 and x64).

Which version of stock firmware did you last have? If it was 4.0.1 or earlier, then you can use
Code:
fastboot oem 4F500301
to issue a flash command even without unlocking the bootloader. If you are on that, then use that command and flash stock recovery and then flash stock zip.

rk2612 said:
Which version of stock firmware did you last have? If it was 4.0.1 or earlier, then you can use
Code:
fastboot oem 4F500301
to issue a flash command even without unlocking the bootloader. If you are on that, then use that command and flash stock recovery and then flash stock zip.
Click to expand...
Click to collapse
I had the most recent update installed. Is there a similar command at the moment?

revedar said:
I had the most recent update installed. Is there a similar command at the moment?
Click to expand...
Click to collapse
Don't think so.