bluetooth fault - Nokia 6.1 (2018) Questions & Answers

hi my brothers nokia 6.1 skips about every 15 secs on mp3 songs connected to his alpine stereo that works fine with my lg v20 any ideas guys >cheers

Flash back to 8.1. Bluetooth in Pie is broken.

Related

Omiz Bluetooth Headset 5130

Dear Gurus,
I got the Omiz Bluetooth Stereo Headset last night and haven't had any success pairing it with my phone!
Do you think it's the Bluetooth version?
This is what happened:
Dopod searched and found the device( Cyber Headset), key in pass key
Set as Handsfree.
But on the headset, the orange searching light keeps flashing....
Alas, there was no sound
On my powerbook, I managed to paired them up but after listening to 1 song, there was a Bluetooth Audio error and the partnership went off and could not be paired again.
Tried it on a Nokia phone and it didn't work too.
But could establish partnership with Sony Ericsson and a Panasonic phone..
I've soft reset the phone and the headset a couple of times to keep trying but to no avail.
Does any here know what the problem might be?
Thank you very much!

Help on bluetooth BA

im using blue angel and wm6.5 by xplode.
i connected my stereo bluetooth headset to my BA and it could not play music via bluetooth.
it will play like 0.5 sec and lag a few sec before playing another 0.5sec.
i tried wm5 and wm6.1 and its all the same.
i also tried pocketmusic and it doesnt helps too.
the bluetooth headset works great with blackstone as tried by my brother but why isnt it working with my BA?
is there a ware or rom that could get the bluetooth music working?

[Q] Bluetooth A2DP issue with Car Stereo

Ok, so here's the deal. I have a rooted T-mo G3 (D851) on a stock rom, out of the box it's been awesome to use with my Pioneer AVH-X2600BT head unit in my scooby. I was messing around with themes a short while ago and then the bluetooth stopped working intermittently. From what I can tell the mix-rate of the A2DP stream changes from 44k to 3hz and all you hear are beeps at multiple amplitudes. The beeps are playing out of the buffer in the head unit until it empties then it resets the connection to the phone. It still plays out these beeps until it's empty even if I disconnect the phone from the head unit.
I don't have this problem with two other iPhones. And previous to my screwing around, it'd work flawlessly since a bought it (launch day.)
Could I have screwed up a mixrate setting someplace? I do have a custom mixer xml for boosting headphone port and speaker audio but I never touched the settings for the bluetooth driver.
This behavior is intermittent and it matters very little what content I'm playing through it. I do notice that when this is happening, no metadata or control is capable through AVRCP either. (i.e. Pandora app can't connect to the phone, no album art, etc)
Sometimes it'll stop doing it and play normally for the rest of the session (drive) after a few minutes and everything is normal. Sometimes it doesn't do it at all and sometimes I can't get it work normally at all.
Here's a video showing the behavior:
http://youtu.be/qYuuTG01x1E
Reset your Bluetooth on your headunit and pair it again with all your bluetooth devices.
I had a similar problem with my LG G3 and my Pioneer AVH-8500 where my Pioneer will not recognize my LG G3 anymore but recognizes my Note 3.
I fixed the problem by resetting my Bluetooth on my Pioneer and had to pair all my devices back to it again.
You will have to look into your Pioneer manual on how to reset your bluetooth.
Edit: I just remembered something.
Did you happen to update or change your firmware.
Some KitKat firmwares are missing the Bluetooth Metadata and will not function properly.
Use autoaudio download it from playstore. This fixes my problem on metadata
Hey thanks guys.
I reflashed the bt radio in my head unit and the problem so far has seemed to go away. Metadata and everything works again.
I appreciate the heads up from another pioneer user.
Vexamus said:
Hey thanks guys.
I reflashed the bt radio in my head unit and the problem so far has seemed to go away. Metadata and everything works again.
I appreciate the heads up from another pioneer user.
Click to expand...
Click to collapse
How exactly did you reflash the bt radio? I have the same head unit and am having problems with it dropping the bt connection to my G3
I just got forced to upgrade my LG G3 to Android 5.0 and it completely screwed up my Bluetooth audio connection in my car.
Bluetooth sync to home audio playback is fine, but BTooth audio is completely corrupted with the Pioneer AVH-X2600BT.
I cant find the instructions on how to reflash my stereo firmware to reset bluetooth settings. I cleared my bluetooth devices in the stereo setup, but to no avail. Can you point me to instructions on a reflash?
I am having the same issue. I have 2 other bluetooth devices that my G3 will connect to and playback is fine for as long as I have battery life. But when connected to my Pioneer AVH-x2600bt, I get constant skipping after 2 minutes of playback. I can pause it for a couple of minutes and when I start playing again it's fine for another 2 minutes. I have done a hard reset on the Pioneer and reconnected my G3 but no change. I have unpaired and cleared all of the bluetooth data in my phone and reconnected, no change. All of the Kit Kat OS devices I have still work fine with the Pioneer but none of the Lollipop devices work. I emailed Pioneer, their reply was for me to take my deck to a service center. That will do no good. One of two things needs to happen, Google needs to update their bluetooth firmware or Pioneer needs to update the firmware for the AVH-x2600bt. Until one of those two things happen I guess I'll be using stone age technology, an auxiliary cable.
Thank you, that is all.
Hello
I can't sent the music to my car radio according to the version of Android. In version 5.0 with different kernel that doesn't work, and with 5.1.1 (blisspop) it works. I 'm preferred the custom rom because I like some features. Someone have a solution or an explanation of why?

Bluetooth headphones with Android 7.1

Hi, guys!
Recently I decided to install Android 7 ROM but have a strange bug with my bluetooth headphones.
It's Bose QC 30. After pairing they with my phone I hear no sound, but if I turn off and then turn on bluetooth on the phone the headphones work correctly. If I turn off and then turn on my headphones and they will connect to my phone, I hear no sound again
If my phone connects to my headphones - all right.
If my headphones connect to my phone - no sound.
When I used Android M, my headphones worked fine.
I tried any ROM with Android N: CM, lineage, Cypher (AOSCP) and many others, each of it has this bug.
I tried to use another headphones (QCY QY12) and very old bluetooth speaker (LG Music Flow P7), they worked correctly.
I don't understand, where is this bug in android N or in Bose firmware.
Any suggestions to fix it? Thanks!
Can I use anything to debug my bluetooth connection and read logs of it?
HTC One M8 (HTC__A07)
S-OFF
Firmware: 6.12.401.4
I would say its from the headphones because are probably old model.I have strange problems with Bluetooth headphones and speakers after upgrading to android 7.My opinion is that they are not compatible with the new version of the android.
mefistoreyon said:
I would say its from the headphones because are probably old model.I have strange problems with Bluetooth headphones and speakers after upgrading to android 7.My opinion is that they are not compatible with the new version of the android.
Click to expand...
Click to collapse
The headphones are a new model of September 2016 but they probably use a old bluetooth chip. Although I tried to use lg music flow p7 bluetooth speaker witch is too older than the headpones and it works fine.
It's a very strange issue.
Yes , strange indeed. Sadly I don't think there is fix for that
And I notice the simmilar issue with my laptop (macOS Sierra 10.12.2): at the first time when the headphones connect, they use SBC codec, if I reconnect they then they use AAC codec. May be Android 7 has a bug to work with SBC codec?

[BUG] Bluetooth music audio stuttering/skipping after Nougat upgrade on Lenovo P2A42

Hi,
This is a very annoying thing I am facing as I am an avid music listener and I love to listen to music in my wire free bluetooth headphone.
Everything was working fine until I upgraded to the official Nougat version from Marshmallow in my Lenovo p2 32GB/4GB.
The audio keeps stuttering and skipping for some mili secs every now and then while listening to music.
I have tested my bluetooth headphone with three other devices and it is working fine with them. I have also tested it two different music player : Google play music and pulsar plus. Both the cases the same problem is happening.
I did a factory reset also but that did not prevent the problem.
Also whenever I am connecting my blutooth headphone, the volume is automatically set to the highest.
Tried to unpair/pair my bluetooth device also, no luck.
The stuttering problem is not happening when I am playing video file via MX player with my bluetooth headphone or while listening to music with a wired headphone.
I took logs from developers setting dated 07/04/2017 :
https://drive.google.com/open?id=0B5ucK93ckWnBTUZqZkhUVF9GWEE --> Btsnoop_hci.log
https://drive.google.com/open?id=0B5ucK93ckWnBdEdKMUJTODRGdk0 --> Interective Bug Report.
Please let me know with a definite solution. This is making my life live harder with P2.
Regards,
Krishnendu
I have same problem with MM and now(with nougat) that 's better, all work fine but when i connect my headphone the sound is at minimum and i must turn volume higher manually on the phone but after, no problem!
Bluetooth Connection Failed With Car Audio System
hi every one
after i updated my lenovoo p2a42 to Nougat i could not connect with audio system in my car .. bluetooth connected to my laptop successfully .
any solution for this case? pls
thanks

Categories

Resources