Dear Gurus,
I got the Omiz Bluetooth Stereo Headset last night and haven't had any success pairing it with my phone!
Do you think it's the Bluetooth version?
This is what happened:
Dopod searched and found the device( Cyber Headset), key in pass key
Set as Handsfree.
But on the headset, the orange searching light keeps flashing....
Alas, there was no sound
On my powerbook, I managed to paired them up but after listening to 1 song, there was a Bluetooth Audio error and the partnership went off and could not be paired again.
Tried it on a Nokia phone and it didn't work too.
But could establish partnership with Sony Ericsson and a Panasonic phone..
I've soft reset the phone and the headset a couple of times to keep trying but to no avail.
Does any here know what the problem might be?
Thank you very much!
Related
I've recently acquired one of these headsets and have managed 2 pair it with my O2 XDA II mini. However, i am unable to stream music to the headset but am able to answer calls and make them too. Does anyone know how i could stream music from my phone to my headset?
if you check in the forum for your pda, i believe you will find you have to upgrade your bluetooth software?
then you will find new menu's in the bluetooth settings including audio/audio streaming.
have the headphones, and am very pleased
already have da software
Hey, i already have the software but the thing is nothing appears in the box labelled "default headset" even after i have paired the device with my XDA. And whenever i try 2 stream music, it initially says connecting but eventually the connection fails and the music does not stream to my headset. Does anyone know how i can get the headset to appear in the default headset drop down box?
when you paired the h/set & phone, what choices did you get?
When I turn my headphones on, my handsfree part pairs but my stereo part won't pair automatically, usually. I just connect it manually, but sometimes it won't just connect so I have to disconnect the handsfree part before I connect the stereo part then reconnect the handsfree part. Occassionally, I have to repeat more than once.
Pair it to the device you want stereo from, start the default "Headset" system for normal talking, press the left multifunction to terminate the connection to the "headset" profile, then press the right multifunction button to trigger the "stereo headset" profile to start.
Or, try to force it after pairing and then press the rightmultifunction to accept the connection and have the device bind that call to that function, enabling and disabling the stereo data.
I had to do the first part with my new HP iPAQ hx2495 to get the stereo headset profile going when i installed the headset as both stereo and regular.
I finally got my HT820 working
I have a T-mobile US MDA.
I first upgraded to ROM 2.24 which supports A2DP, which is what the headset uses for sound other than the phone. (When you flash your ROM it intalls all new boot up software so it changes your hard-reset process, and you lose your support.) Then I paired. You should see the services the headset offers, handsfree and stereo. There's also a menu available when you hold-slelect the name of the BT device in the device list that's handy.
I did discover that it is a headset problem if the sound skips out irratically averaging about 20 seconds. There was a bad batch sent out to/from Hong Kong. Motorola is replacing mine, but I had to pay to ship it to them.
Hope this helps!
I don't want to hijack your thread but I don't know where else to turn. I have requested help elswhere on this forum for my problem but I can't seem to get any help.
I have a ht820 and a cingular 8125. I've been able to pair the headset with my phone but, when I try to play a mp3, the voice speed dial comes up, the mp3 plays for about 3 seconds, then the mp3 audio reverts back to the phone.
Do I have to flash to a different rom, do I have to tweak registry settings? I don't really have a clue what I should do. Please help.
Porter
Edit: I've solved my problem. See this thread for my fix.
http://forum.xda-developers.com/viewtopic.php?t=58192&highlight=
Thanks
Actually what it sounds like is the phone is only connecting to the headset for that time under the premise of a voice dial with the headset profile. I think you're lucky enough that you can get it to play for those 3 seconds. I have a Sony Ericcson w810i and I can't even get any audio from it to the headset at all without using the w810i's 3.5mm adapter to the patch cable on the headphones which just looks weird. But you might want to do a search for your model phone like this, "Cingular 8125 Motorola HT820" and see what kinda results you get.
Hi,
i had a question regarding the connectivity of the bluetooth. I am currently holding hp ipaq 6828 and itech clip radio bluetooth headset. I am able to pair the phone and the bluetooth headset. The probelm i faced is i switched on my bluetooth headset and my pda in discoverable mode. I am unable to auto pair it. Is it that i need to install some third party software in order to let it auto pairing or there is no way it can auto pairing like Sony Ericsson. Please advise.
Thanks
John
no idea what you mean by auto pairing, but the HEADSET needs to be in discoverable mode, not the phone. the phones BT just needs to be on. once the headset is in discoverable, (i.e. the light is steady-not always.. just on the ones ive used), try to pair it from the phone.
Good luck.
-Nstefanelli-
Hi all
As this is my first post I just want to say a big thankyou for all the contributers to this site, awesome information and keep up the good work.
I have been running Black Majik on my M3100 for a week or so now and have been really impressed. the only slightly annoying problem I have is with my BT Stereo headset (HTC BH S100) which I have had only a couple of days.
Listening to music and controlling the media player(s) (Audio Manager and WMP) is fine, the problem I get is answering/initiating calls from the headset. After a reboot of the phone, the headset works OK for both music and calls, but after turning the headset off/on, the call handling functions don't work although wireless stereo does - its as though the phone loses the headset profile but not wireless stero. Stopping/Starting the BT stack from comm manger seems to reinstate the headset functions but this is frustrating!
I have searched multiple forums but have not found anything of use yet!!
Does anyone have any ideas
Thanks in advance
M.
+1
same problem
please help us
Up ... Same WM6 version, same problem ... with a Nokia BT Headset, and a Sony Ericsson too ...
Thank you.
guess i have a worse problem then. cant hear my phone ring from my BT HS. not that ive tried to figure it out. i can live without listening to music. but it would be interesting to know how everyone is able to hear their phone ring from their headsets. im thinking its because of my headset. i have a moto hs810. does anybody concur?
merlynuk said:
Hi all
........
After a reboot of the phone, the headset works OK for both music and calls, but after turning the headset off/on, the call handling functions don't work although wireless stereo does - its as though the phone loses the headset profile but not wireless stero. Stopping/Starting the BT stack from comm manger seems to reinstate the headset functions but this is frustrating!
..........
M.
Click to expand...
Click to collapse
I have the same problem and I've tried a P3600 and kaiser and the same problem.
As merlynuk wrote the problem seem that the HD lose a free hand function of it profile and only a reset and sometime a pairng od device solve it.
It's for me important to use this function in car or call a voice command but the MTB button seem not work.
bought this HD because belived it would be perfect with a HTC PDA but it's not really.
Do you have some suggestion ?
Do you believe it's better to sell this HD and to buy another ?
Someone know a HD device thet work perfectly as free hand and function as a call, a start a vocal command etc etc work fine ?
Regards
aladino
got the same problem: bought the HTC BH S100 after my touch cruise cause I thought to have no problem with vocal commands, but it doesn't work. music, player control, phone and pairing are perfect but no vocal dialling..
how can we solve this??
Hi,
I have this strange problem. I'm using the Black Majik LE and a i.Tech Arrow X headset.
I'm able to pair both of them successfully - completing with the i.Tech Arrow X added (that's the only bluetooth device i have).
However the headphone icon does not appear on the taskbar and i cannot make/receive calls through my headset, it seems as if its not paired, all the audio/mic goes through my Hermes.
I checked that the bluetooth is on (blinking blue light), resetted my Hermes, delete the pairing and re-paired, resetted my headset, all with no avail.
To confirm that my headset is fine, i paired with another phone (Sony Ericsson) and its working fine, so its definitely a problem on my Hemes.
Has anyone encountered this before or have any suggestions on how to resolve this?
Thanks!
I have the same problem with official WM6....
Suggestions anyone?
I to have this problem, I could connect my bluetooth headset fine before to listen to music but now all music is played out of my dopod 838 pro and doesn't come out of the headset at all its like its not there and i've also done all those steps you mentioned Patrick.
Bluetooth headset works great on my official WM6. I've tested with both Jabra BT 620s and Pulsar 590A. I can receive phone calls in of middle of the music. No problems at all.
Maybe it has something to do with your BT headsets?
racoon82nz said:
Bluetooth headset works great on my official WM6. I've tested with both Jabra BT 620s and Pulsar 590A. I can receive phone calls in of middle of the music. No problems at all.
Maybe it has something to do with your BT headsets?
Click to expand...
Click to collapse
I flashed to vp3g's v3.0 and the BT headset works fine.
Flashed back to Black Majik LE and the BT headset works again
Weird.
Thanks for all your help anyway
I've flashed back to WM5 headset works fine but back in WM6 still not workin for stereo only for phone calls.
This may seem like a silly question, but under bluetooth connections, did you try selecting (and holding) the bluetooth device and then selecting the option that says "Set as Hands Free" (or wireless stereo if you want to listen to music)? It seems like some older rom I had didn't require this, but now I have to do this each time the device is turned on or off.
Anyone had any success pairing the JABRA BT320s with MDA 2 and if so, do all the functions of the bluetooth stereo headset work?
Thanks.
Upgrade
Purchased Jabra BT320s and paired with Vario 2 after upgrading ROM. Everything working fine with excellent sound quality. I did not try to pair with Vario 2 on old WM 5.0 ROM so I cannot say if the BT320 would work on this OS.
I DID try to pair a BT320s with my TyTN a while ago, no luck......im going to try again now, as i was quite annoyed it didnt work. Will report back soon.
EDIT:: Gonna need to get a plug adapter as i forgot the dumbasses i bought it from sent an EU power supply and not a UK one...LOL!
from what i remember it was around JUNE time when i tried it, sounds like the bluetooth drivers may have changed since i tried it but it did seem as if the headset was the problem and not the drivers as i have had other A2DP headsets working fine.
Jabra BT320's
Bluetooth can be a real pain at times - with unpredictable results. I cannot begin to tell you how much wasted time I have spent trying to pair gadgets together - so it was a pleasent surprise to find the Jabra's paired first time and functioned as described.
Wishing you LOL.
tange.
well i tried it again and even on my pretty up to date ROM it only pairs as a headset and not wireless stereo urgh!
may be worth a rom upgrade?
i have a 320s (uk version bought from a tmobile shop - their selling them for 25quid) and it works fine on my wm5 spv m700 and is detected as wireless stereo and headset
mrvanx said:
well i tried it again and even on my pretty up to date ROM it only pairs as a headset and not wireless stereo urgh!
Click to expand...
Click to collapse
i had the same issue with this thing ... i did a hardreset and it showed up as stereo headset again. i had to do one anyway...
@all how do you like the jabra? mine is quite noisy ... i use my ugly samsung speakers instead and thinking about buying a 3.5mm adapter for the car.
I have been playing with the bt320s for a few days on different roms for my wizzard. I have been tring some WM5 and WM6 roms for features and bluetooth options. What i found was that I could pair with WM5 but even if it gave me the stereo option it was only in mono. After a google search i found someone mentioing that WM5 only supports Mono.
I then tried a couple of WM6 roms and found that they all supported the stereo correctly.
I then hit a problem as I decided that a ROM i tried earlier had everything i wanted (Diamond). So, decision made, I flashed the rom and tried to pair and it would only pair on headset and not offer the stereo. Very wierd as it worked before????.
I then found a post on another site which mentioned the following with the Bt320s headset.
1) delete any pairings on the phone.
2) switch of headset
3) plug the charge into the mains
4) put the charge into the headset 3 times for 5 seconds each.
5) Recreate the pairing with the phone.
Sounds wierd but it worked??????
I now have a wm6 rom with stereo bluetooth.
the only problem now is that WM6 closes all my apps when i switch it off and on using the power button.
This seems to be a bug when you enable a security pin in WM6 which i am forced to do via a directpush policy from work. Does anyone know a workaround for this as it is anoying to have your cub/pointui/media player etc close on you and go back to the home screen whenever I use the power button.
*****Orange are selling the Jabra BT320s online for £9.50 at the moment. Well worth the money*********
Quick update, on the latest pandora ROM (Tytn) ..... Its working great.
OhtwoXDA2 said:
1) delete any pairings on the phone.
2) switch of headset
3) plug the charge into the mains
4) put the charge into the headset 3 times for 5 seconds each.
5) Recreate the pairing with the phone.
Sounds wierd but it worked??????
Click to expand...
Click to collapse
Just tried this trick and it work! I have a Jabra BT620.