Hello i’m Looking for a replacement display for my head unit does someone know the specifications of the display and where to find a new one with better illumination if possible.
Thanks
Related
I'm currently using a HA RK3188 (1024 x 600, 7" display). My dad has my old JY RK3066 (800x480, 6.2" display). He can't get on with it so I will be taking it back. I don't like the display in my RK3188, it's too dim in comparison to that of the RK3066, you can't see it properly in sunlight.
My question is - is it possible to swap over the displays? Can I fit the lower resolution display from the RK3066 to my RK3188?
One point is that the RK3066 has a CD/DVD slot whereas my RK3188 has not, but I can live with that.
Also, I realise I might need to flash a different ROM because from memory Booroondook's ROMs are display resolution specific.
Hi there. Accidentially I ruined the display of my PX5. It's a whitelabel Pumpkin with 8 inch screen (pic attached). Does anybody know where I can get a new one? Thanks in advance.
What did reseller suggest?
Hi. Bought ist from Ebay. Reseller is no longer there
Edit: I just read it is an 8 inch PX5 *whitelabel Pumpkin*
Even if that reseller is gone, there may be others selling the same units, or different brands or clones sharing the same parts. Go through all settings or purchase records, find your model name and identifier, and google for " replacement display". Do you come up with any results?
Depending on when you bought it, you might find a new generic unit cheaper without all the cables, and use the wiring from your current unit along with its fascia.
I still have a display of an identical RNS Are you interested?
Good evening, everyone. I have a Golf 7 GTD and i'm pretty undecided between this unit
(they recommended it to me) and this one
. Both of them have MTCE type MCUs. Looks to me like the dasaita has better chips. Which of the two has better audio in radio, Bluetooth and general functionality. Why does dasaita cost so much more? Thanks in advance!
Both! Unless you know the mcu/manufacturer
Hello,
I have a Dasaita px5 HU and about 6 months later Dasaita upgraded to px6. My installer was unable to connect my headrest monitors to the HU. I reached out to Dasaita regarding what options or Converters that may be needed and they advised me to upgrade to px6. Are there any other options to make this happen?
Thanks
Managed to put an px6 board 4gb-64gb rom instead of the original px30 (2gb ram-32gb rom)SOM board, nothing to do, worked immediately ... no mcu reprogrammation needed (even did an config export)
The px6 came from an XTRONS TQ709ipl i was sick of the capacitive touch problems who just began this past week. I opened the 2 radio casings and saw they had the STM32 mcu interface.
I did not saw any thread about SOM interchange between brands
Now stuck with an working Xtron tq709 main board / frame, and 2 px30 som, i received one spare SOM in the warranty period thinking the Eonon had a problem, the 20 pin power plug had a problem, not the radio ...