I have the version 10a on it at the moment. I unlocked my boot loader and had root on it. Since I had destroyed my firmware, I wanted to rebuild the smartphone. I only found version 10b for the European version. Unfortunately, the program only goes up to 11% and then stops. Error 0x2000 command response code 0x80000202.
I hope I have not destroyed my smartphone now
https://forum.xda-developers.com/android/software-hacking/lg-g7-fix-error-0x2000-lgup-t3846563
Related
hello guys,
i purchased my phone through Amazon, H815, but it's a TWN version apparantly,
it's stuck on V10b, and i tried manually checking, even with LG mobile support tool, and it still says no update for me.
any ideas?
I have an unlocked US H815 and I'm still stuck on VX10b too. Kind of irritated I don't have a stagefright fix yet.
isnt there a manual option to download the file and somehow install it, without a root\recovery of course
Hi,
So someone gave me a LG G3 which he updated to "D85530C_00_0211.kdz". After that the phone stuck in the LG logo and it rarely loads the phone but it freezes. I can barely unlock the phone sometimes but usually it doesn't recognise the touch.
Neither the PC is recognising the phone.
I tried to use LGFlashTool with TOT file but after "READY" when I unplug and plug again it says "Download Fail".
I also tried with the older LGFlashTool using the KDZ but still didn't work. It only worked with the KDZ above, which is the same software and again it is freezing.
LGUP isn't working too.
Any help/suggestions?
P.S.
Maybe I'm using wrong TOT/KDZ?
-The version he updated and also I was able to install is D855
-Under the battery writes "Made in Korea" which may be a Korean phone but Korea doesn't have D855
-I searched on imei.info the IMEI number and it says Carrier Poland.
-I tried using Poland KDZ, Hong-Kong TOT (because they have d855) and Europe TOT(which also has d855)
-The phone is 16GB
I do believe that your board is not of d855. It happened to me a month ago. When I opened the phone.I saw d850 written on my board.so that might be the problem.
Jahanzaibawan said:
I do believe that your board is not of d855. It happened to me a month ago. When I opened the phone.I saw d850 written on my board.so that might be the problem.
Click to expand...
Click to collapse
It says D855 behind the phone. Also all parts do write D855 and a number near by. So it must be a D855.
i also have a h815 ... locked bootloader
whenever the phone is rebooted i get an error message saying 'current version is not available for user. Can't find mathed cust for NT-code mcc/mnc[FFFFFF], subset[55]'
i'm planning on selling the device and i wish to do so without that problem
software version is V10c-OPT2-HQ
need help really fast
thanks
Did you try using LGUP to flash to stock?
If you didnt, make sure to use an international KDZ, for example the newly released V20G.
Good Luck
i have lg g4 h815t version on android 5.1, i want to update to 6.0 but when i try to upgrade on lg bridge, the error occurs at 9%. I tried to update with lg flash tool and lg up also, either way didn't work out. The same problem at 9%. The error on lg up was "error code 0x2000 can't decide current device mode". I tried different kdz files but i couln't update. Is there anyone do that successfully? the software version is H81510u.
which kdz version have tried
ahmeterol21 said:
i have lg g4 h815t version on android 5.1, i want to update to 6.0 but when i try to upgrade on lg bridge, the error occurs at 9%. I tried to update with lg flash tool and lg up also, either way didn't work out. The same problem at 9%. The error on lg up was "error code 0x2000 can't decide current device mode". I tried different kdz files but i couln't update. Is there anyone do that successfully? the software version is H81510u.
Click to expand...
Click to collapse
use LGUP program search for it and download KDZ file to flash it with LGUP.
Update: Here is what SALT gives me. https://i.imgur.com/Np6roET.png
Can someone give me some steps, which firmware to flash and how to do it with SALT
Today I bought used LG G4 with secure booting error 1003 and I though I could flash stock and get a nice phone.
The sticker under the battery says H815 and the IMEI number checks out as F500S but when I looked inside, the motherboard name was F500L Main.
The phone shows up as H815 with H81510H version. I tried LG Bridge too it showed up as F500S but it didn't want to update it after it downloaded the firmware....
Download mode works but recovery doesn't work. I tried vol. down and usb and it boots up in fastboot mode with scares information nothing much some key parts are empty but it says that the secure boot is off.
I tried latest OPEN H815 6.0.1 kdz, but I get the error 0x2000 at 9% something about trying to flash smaller ARB version. I even tried F500L TOT with LG UP and flash tool but then I get an error "invalid tot" I even tried hex editing the TOT file I changed one line from F500L to H815 but I get the same invalid Tot file. Maybe I missed some other part of the tot file..
My only option left is to get into linux and use SALT but I have no idea what to do with it. I know that I can get some information and even extract system into kdz right?
Let me know if there is fix like some DLL for flashing the F500L TOT file...
twrp
Since its UsU i was able to boot into twrp. What rom should I install now? the GPT in SALT says H811 and my board is f500 (L) It had h815:laugh:
serifpersia said:
Since its UsU i was able to boot into twrp. What rom should I install now? the GPT in SALT says H811 and my board is f500 (L) It had h815:laugh:
Click to expand...
Click to collapse
What about reading the UsU thread??? There is a even a faq.. Whatever you do never flash anything which has an ARB higher then 0.
Sent from my OnePlus 7T Pro using XDA Labs
steadfasterX said:
What about reading the UsU thread??? There is a even a faq.. Whatever you do never flash anything which has an ARB higher then 0.
Click to expand...
Click to collapse
I finally fixed it.
I tried FWUL but when I had to update SALT to get ARB from kdz it had some python3 crypto module missing and I wasn't able to make it work. So I used my Lubuntu and I installed everything needed and Salt was running fully updated.
I extracted the latest MM kdz for F500L and using fastboot I flashed the MM bootstack and boot system modem(once) and the phone started to boot up to the korean android is updating screen. It bootlooped with error 1009. I assumed that the battery was working fine but nope it was totally dead.
With the charger the phone booted up and everything works even Cellular Network.
Your SALT tool saved my ass man