Here is a simple mod that allows you to increase the maximum headphones volume in Oreo custom ROMS for Vince, here's three files:
Original: restore the original max headphones volume in Oreo Custom ROMs
85% Boost (recommended): Increase the max headphones volume to something like the original levels in MIUI, this one doesn't cause distortion or noise.
100% Boost: Increase the max headphones volume to 100% Use at your own risk! May cause distortion, noise, hearing loss or headphones damage.
Requirements:
Unlocked Bootloader
TWRP
Oreo based Custom ROM
Installation:
Dowload the file and flash with TWRP, doesn't need to wipe anything, reboot and test.
Tested on:
Resurrection Remix
Liquid Remix
AEX (AOSP Extended)
Pixel Experience
Havoc OS
Dot OS
Thanks for the great mod. Before I had to max out the volume and it was still not enough. Now I seldom need full volume most of the times i keep it one or two steps lower and thats with the 85% boost.
One question, does it affect bluetooth headphones? Because today I tried a pair of headphones I was considering to buy and they felt nice to me but the loudness was underwhelming. I had changed ROMs so I didnt have the mod installed that time. So will this mod improve that or there isnt a way to increase the volume of those headphones? Because I'll only buy them if I can increase the loudness.
Mubasher96 said:
Thanks for the great mod. Before I had to max out the volume and it was still not enough. Now I seldom need full volume most of the times i keep it one or two steps lower and thats with the 85% boost.
One question, does it affect bluetooth headphones? Because today I tried a pair of headphones I was considering to buy and they felt nice to me but the loudness was underwhelming. I had changed ROMs so I didnt have the mod installed that time. So will this mod improve that or there isnt a way to increase the volume of those headphones? Because I'll only buy them if I can increase the loudness.
Click to expand...
Click to collapse
This mod does not affect Bluetooth Headphones because Bluetooth headphones has his own DAC, I'll try to research if its possible to increase the loudness, but I'm pretty sure that its not possible over Bluetooth headphones.
Thanks :angel: worked perfectly in Pixel Experience Rom ? 85% is enough I think
---account closed
Hello, it worked perfectly for me, I wanted to ask you if you could create a mod that works in the custom roms that is to increase the volume, as well as MIUI, the volume of the speakers
FrankrdZ said:
Hello, it worked perfectly for me, I wanted to ask you if you could create a mod that works in the custom roms that is to increase the volume, as well as MIUI, the volume of the speakers
Click to expand...
Click to collapse
I just figured out how to do it, tomorrow I'll update the post with the files to increase the speaker volume as well
FrankrdZ said:
Hello, it worked perfectly for me, I wanted to ask you if you could create a mod that works in the custom roms that is to increase the volume, as well as MIUI, the volume of the speakers
Click to expand...
Click to collapse
Sorry, I only was able to decrease the volume, I was thinking to just set a higher value, but when I try to increase, the speaker reach a limit and I don't notice a louder volume at all, maybe it's a secure limitation, but I need to do a extensive research. But for now, you can use Viper4Android V15, it's a magisk module, I suggest to enable "speaker optimization" And "eXtra Loud" In speaker tab, and under "master gate" You can set the "Output Gain" To 3dB, also you can use the equalizer optionally. It's not the best solution, especially in max volume, but it's good enough, I think it's safer way to do that without compromise the speaker integrity.
Related
I tried many sound mods like V4A, Dolby Atmos, Xtrememusic....but none increase really the 3.5mm output volume.
You can get more loudness thanks to V4A+Dolby but still you feel there are 20 even 30% missing volume.
Usually with V4A I boost the db in the end from 0 (normal) to +6db and playback gain control to the max on an HTC it used to boost the volume about +30% which was enormous (never used in real life only for testing), but on the G4 and whatever the kernel I used, these +30% are only there at low to mid volume steps (G4's stock volume steps), once you are at step 7 over 10 it will have the exact same volume as 10 over 10, meaning no gain at all. It will just use the max stock volume on lower volume steps :crying:
It looks like the G4's hardware or snapdragon is limiting the max 3.5mm volume.
I tested with my Sony SBH50 BT and HTC CAR Stereoclip BT modules and the volume gain is about 20% over the max volume (meaning 120%) so V4A and other mods can bypass the max volume on a connected BT from the G4 but not the G4's own 3.5mm output
Do you know any ways to bypass this limitation?
I tried Jetaudio and other apps using Gain option but the sound is bad once +1db over normal
vegetaleb said:
I tried many sound mods like V4A, Dolby Atmos, Xtrememusic....but none increase really the 3.5mm output volume.
You can get more loudness thanks to V4A+Dolby but still you feel there are 20 even 30% missing volume.
Usually with V4A I boost the db in the end from 0 (normal) to +6db and playback gain control to the max on an HTC it used to boost the volume about +30% which was enormous (never used in real life only for testing), but on the G4 and whatever the kernel I used, these +30% are only there at low to mid volume steps (G4's stock volume steps), once you are at step 7 over 10 it will have the exact same volume as 10 over 10, meaning no gain at all. It will just use the max stock volume on lower volume steps :crying:
It looks like the G4's hardware or snapdragon is limiting the max 3.5mm volume.
I tested with my Sony SBH50 BT and HTC CAR Stereoclip BT modules and the volume gain is about 20% over the max volume (meaning 120%) so V4A and other mods can bypass the max volume on a connected BT from the G4 but not the G4's own 3.5mm output
Do you know any ways to bypass this limitation?
I tried Jetaudio and other apps using Gain option but the sound is bad once +1db over normal
Click to expand...
Click to collapse
Yep this horror .Bad point for g4.
On G3 exixst one good app but not working on G4 https://play.google.com/store/apps/details?id=com.laransoft.volumeG3
Only tiny solution:Flash faux sound supported kernel and install faux app.This app help raise vol minimal.
Sorry for my bad english.
kabirjedi said:
Yep this horror .Bad point for g4.
On G3 exixst one good app but not working on G4 https://play.google.com/store/apps/details?id=com.laransoft.volumeG3
Only tiny solution:Flash faux sound supported kernel and install faux app.This app help raise vol minimal.
Sorry for my bad english.
Click to expand...
Click to collapse
Thanks!
In just tried the Fauxsound as my kernel is Superex, and yes it's better than V4A, at least we clearly gain volume with it, I set it at +2 or +3db because more than that the sound quality is deteriorating.
I even disabled V4A as it was doing some parasites once Fauxsound is boosted.
So I think I can say no for a Fiio E6, I wanted this small boost for the incoming ski days
vegetaleb said:
Thanks!
In just tried the Fauxsound as my kernel is Superex, and yes it's better than V4A, at least we clearly gain volume with it, I set it at +2 or +3db because more than that the sound quality is deteriorating.
I even disabled V4A as it was doing some parasites once Fauxsound is boosted.
So I think I can say no for a Fiio E6, I wanted this small boost for the incoming ski days
Click to expand...
Click to collapse
Yes .No perfect solution yet.I think software restriction.Need professional dev. help!
Wow I found my old good Cowon J3, the volume is way louder than G4, it will be my sports music device instead of G4, the only thing is that BT is only 2.0 so I will only used with wired earphones, and if someone calls me on the G4 I won't know
Modify mixer path dont work more volume?
Enviado desde mi LG-H815 mediante Tapatalk
zToRk said:
Modify mixer path dont work more volume?
Enviado desde mi LG-H815 mediante Tapatalk
Click to expand...
Click to collapse
Placebo....
I really don't understand all your doubts about VA4 and volume sound...
I've installed in several phones and with a good profile effect, the sound is fantastic and I only can listen to music with the volume at 25/30%.
If kernel support audio you also increase sound loundeness wit faux app or simple kernel teak tool like kernel adiutor, sypnase or trickster.
Sent from my LG-H815 using Tapatalk
rimsilva said:
I really don't understand all your doubts about VA4 and volume sound...
I've installed in several phones and with a good profile effect, the sound is fantastic and I only can listen to music with the volume at 25/30%.
If kernel support audio you also increase sound loundeness wit faux app or simple kernel teak tool like kernel adiutor, sypnase or trickster.
Sent from my LG-H815 using Tapatalk
Click to expand...
Click to collapse
Only Faux app is working with actual G4 kernels.
I tried the new Beats port http://forum.xda-developers.com/android/software/mod-htc-beats-audio-beats-xperience-t3281603 and it's pretty good, at last it gives some warmth to the bass
I am on genysis 3.5 with the superxe kernel and v4a definitely works. I would suggest looking at the driver status in v4a and verify that it is set up properly.
If you try v4a again, you might be interested in the convolver Dolby pro logic 2 IRS profile. I think that would give you the volume boost you are looking for.
kabirjedi said:
Placebo....
Click to expand...
Click to collapse
False.
Following the exact tutorial I posted there is a *very* real difference in max volume when editing the mixer paths. I've repeated it many times on my 5.1 H812 from stock.
The unfortunate problem is the distortion that comes with upping it too much, so the gain is noticeable but you're not able to boost it too high. It's very limited by the hardware. My S3 still sounds a lot better, and it goes louder... bah.
http://forum.xda-developers.com/g4/themes-apps/guide-lg-g4-volume-boosting-t3182304
(I found this thread because I was looking for anyone else who may be experimenting, as I'm really not satisfied with the audio output.)
vegetaleb said:
Thanks!
In just tried the Fauxsound as my kernel is Superex, and yes it's better than V4A, at least we clearly gain volume with it, I set it at +2 or +3db because more than that the sound quality is deteriorating.
I even disabled V4A as it was doing some parasites once Fauxsound is boosted.
So I think I can say no for a Fiio E6, I wanted this small boost for the incoming ski days
Click to expand...
Click to collapse
Boy, I sure wish this were an option for the H811 variant. I can't find any kernel that supports fauxsound. This low gain output kills me. I used to have a V10 with the same chipset and that thing would go incredibly loud. This is so disappointing.
hi everyone, as you know the volume of headphone jack output is low, or at least for me it's low, how can i increase volume of headphone jack output ?
i have checked the thread that is about audio mods, there is a headphone volume code to increase the volume, but i don't know which file should i change.
i'm on OxygenOS 3.2.7 and it's rooted, please help, thanks ...
can anyone help please ? i really need that volume to be increased !!!
sasan50cent said:
can anyone help please ? i really need that volume to be increased !!!
Click to expand...
Click to collapse
I have no idea about the code.
If you are not able to do it your way, as an alternative, you can install a custom kernel with audio tweaks and increase the volume through that.
http://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709
Flash this buddy it's viper4arise and comes with an audio player you can increase the volume by going into viper4arise settings I have it on my oneplus3 and it's blasting ....
Xceeder said:
http://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709
Flash this buddy it's viper4arise and comes with an audio player you can increase the volume by going into viper4arise settings I have it on my oneplus3 and it's blasting ....
Click to expand...
Click to collapse
thanks so much friend, gonna try that
Does anyone know how to increase headphone audio on rooted stable OOS?
Or does anyone know the difference between mixer_paths.xml and mixer_paths_tasha.xml ?
I dont wanna install ARISE, it makes sound quality worse. Even with only upping the audio it makes it worse.
I dont wanna install a custom kernel as well.
What i would like to do is mess with a file like mixer_paths.xml, edit a few lines and get a higher audio on jack for music.
That's all i want higher audio for music.
Is that even possible or do i need a custom kernel?
Hi guys, recently I noticed that the headphone jack output isn't as loud it used to be in the OOS 3.X days.
For example, setting my OnePlus X aside and comparing the two, I would much rather prefer the louder, more aggressive tones it produces compared to the OP3.
Does anyone know what I could do to work around this? I have the bluspark kernel currently. I flashed francokernel to use gain control and was running into stability issues and bootloops before i could even get to it.
I'm currently on OB14 and my daily driver IEMs are the Xiaomi Hybrid Pro HDs.
Thanks.
Use ARISE Sound mod + V4A. These work great. Also these are included in popular roms like FreedomOS & ExperienceOS.
Hope this helps.
vjendra said:
Use ARISE Sound mod + V4A. These work great. Also these are included in popular roms like FreedomOS & ExperienceOS.
Hope this helps.
Click to expand...
Click to collapse
I tried that, but it doesn't seem to make my audio any louder than it was before
humzaahmed155 said:
I tried that, but it doesn't seem to make my audio any louder than it was before
Click to expand...
Click to collapse
Do one thing flash FreedomOS and in aroma select Arkamysa and Viper 2.5 (or whichever is latest), do not select anything else in Audio Mods. It will work for sure.
humzaahmed155 said:
I tried that, but it doesn't seem to make my audio any louder than it was before
Click to expand...
Click to collapse
Get Viper4Android, do not get any audio mods that come with ROMs if you really do care about audio quality. All these different audio mods make music sound like absolute trash and remove a lot of clarity. Viper4Android doesn't change the sound if you don't want it too and you can go to the last option and boost the gain by I think 10db... That is plenty enough to bring it back to the loudness you like (probably way higher) while not deteriorating the sound much.
I can see there is a mod ported from 3T to 5 that allows the phones earpiece to work as a second sound speaker when playing music.
https://forum.xda-developers.com/oneplus-5/themes/stereo-speaker-mod-oos-t3632980
Anyone knows if this would work on 5T?
is not a good idea. The above loudspeaker is not designed for it.
It should be fine. I’m not looking to make the sound louder, overstressing the earpiece. Just some small treble to make you hear stereo. Anyone able to port the MOD?
I just tried this mod by swapping the xml file and it worked.
But I don't keep it as the file is smaller than the stock one.
Plus it's designed for OP5, not 5T
I revert back to stock, waiting for a clean port !
Just to mention, the speaker was way louder than the earpiece, making the sound not really balanced.
A few persones ask in the OP5 thread how to change the volume of the earpiece, or if it's possible to change the steps of the volume like this :
25% speaker = 50 % earpiece
50% speaker = 70 % earpiece
75% speaker = 100% earpiece
100% speaker = 100% earpiece
to have a more balanced sound (except for 100% of course)
and lastly it would be cool to have a quick way to disable the mod, in case of high volume during a long period, to prevent earpiece damage.
It would be really, really cool if a dev could do this.
Thanx a lot in advance !
Link2811 said:
I just tried this mod by swapping the xml file and it worked.
But I don't keep it as the file is smaller than the stock one.
Plus it's designed for OP5, not 5T
I revert back to stock, waiting for a clean port !
Just to mention, the speaker was way louder than the earpiece, making the sound not really balanced.
A few persones ask in the OP5 thread how to change the volume of the earpiece, or if it's possible to change the steps of the volume like this :
25% speaker = 50 % earpiece
50% speaker = 70 % earpiece
75% speaker = 100% earpiece
100% speaker = 100% earpiece
to have a more balanced sound (except for 100% of course)
and lastly it would be cool to have a quick way to disable the mod, in case of high volume during a long period, to prevent earpiece damage.
It would be really, really cool if a dev could do this.
Thanx a lot in advance !
Click to expand...
Click to collapse
So based on your post, the mixer file is in the same place but it's smaller, and the Oneplus mod worked for you, that means the lines inside for the speaker mod are good.
Can you send me the 5T original mixer file? My phone will get to me tomorrow, but I can merge the 5T file with the Oneplus 5 changes (keep full content of 5T and add only the changes from 5)
EDIT: Regarding the volume, I would not mess with that very much. I think you can use Viper4 to control it, but I would suggest to remove the Bass and increase the gain with maximum 10 percent. You should be on the safe side (not breaking your earpiece) and also gain some sound. (bass from bottom speaker and treble/small mid from earpiece)
Here it is, thank you !
Btw, I don' think Viper can do anything about that.
In fact, this mod only replicate what the main speaker is playing, doing dual mono.
So if I change something with Viper, it will do it for both, right ?
Or am I completely wrong ?
Link2811 said:
Here it is, thank you !
Btw, I don' think Viper can do anything about that.
In fact, this mod only replicate what the main speaker is playing, doing dual mono.
So if I change something with Viper, it will do it for both, right ?
Or am I completely wrong ?
Click to expand...
Click to collapse
Here is the modded 5T file. I don't have the phone yet to test it, but will let you know as soon as I do.
I am not sure about Viper4, but I think it has independent controls for bottom speaker and top speaker, I might be wrong.
Not work with Viper.
Aligatz1989 said:
Here is the modded 5T file. I don't have the phone yet to test it, but will let you know as soon as I do.
I am not sure about Viper4, but I think it has independent controls for bottom speaker and top speaker, I might be wrong.
Click to expand...
Click to collapse
Greaaat, I will tell you in a couple of hours
Okay, it works !
But :
It only works on Youtube, that's a start ! That's the main reason I need both speakers so I'm happy
anyway
As I say before it would be cool to have a bit more volume for the earpiece. Do you know what line I need to edit in the xml ?
And about Viper, I don't see what I can do with it, as the app is not designed to support settings for stereo speaker. I mean, no settings for one specifically.
But thanx a lot to you and DorianX, it's really cool
Edit : Well I searched in the XML and edit the "91" volume to "100". It's really better !
Edit 2 : I was wrong ! The earpiece works in chrome and other apps too. It's weird because, in some games like Super Mario Run, the earpiece works correctly, but in other games like Monument Valley 2, it doesn't
Did you tried using Viper4android? (Disabling then enabling again), also try with Universal deep_buffer Remover: https://forum.xda-developers.com/apps/magisk/module-universal-deepbuffer-remover-t3577067
Anyone want to write a how to?
This is the only thing I really miss from my old iPhone 7+
I'm assuming rooting is required etc.
As we all know ,zuk z2 plus has a very low speaker and ear piece.
People usually use Dolpy Atmos module to make the volume louder . It works , but I tried different versions of it but the only one that worked for me was the nougat version and now I'm stuck with android nougat because the loud volume is very important for me.
What do you use to make uour volume louder guys ? I want to update to pie but all the roms I tested have a really low volume .
The Sinbad said:
As we all know ,zuk z2 plus has a very low speaker and ear piece.
People usually use Dolpy Atmos module to make the volume louder . It works , but I tried different versions of it but the only one that worked for me was the nougat version and now I'm stuck with android nougat because the loud volume is very important for me.
What do you use to make uour volume louder guys ? I want to update to pie but all the roms I tested have a really low volume .
Click to expand...
Click to collapse
1.download a file explorer
2.Go to *root* > vendor > etc
3. Open mixer_paths_tasha.xml in editor.
4. To increase speaker volume -
Find "RX7 DIGITAL VOLUME" and change it's value from 84 to 87
5 to increase earpiece volume -