Develop Bugs

[DUMP][English] G4 I9500 UBUAMDE [Rootable][No locks]

Not rooted, not edited in any fashion. Just a straight system dump before I rooted it.
Details are:
Baseband Version: I9500UBUAMDE
Build Number: JDQ39.I9500UBUAMDE
SELinux status: Permissive
Rootable using this method - Tested, proven true
No Bootloader Lock
No Carrier Lock
Bought from: Bahamas; BTC (Bahamas Telecommunications Company)
No CarrierID (lulz)
https://hotfile.com/dl/207840870/7a7c4d9/system.zip.html

Thanx!!! needed this.

linkultima said:
Thanx!!! needed this.
Click to expand...
Click to collapse
Just confirming: You know this isn't the actual firmware, right? I just want to make sure you know.
Find the one you want here, if that's what you're looking for: http://samsung-updates.com/device/?id=GT-I9500

I have rooted my phone already, but did no dumped it in its original state, can you flash this using odin or you flash it using CWM? regards.

linkultima said:
I have rooted my phone already, but did no dumped it in its original state, can you flash this using odin or you flash it using CWM? regards.
Click to expand...
Click to collapse
I rooted my own using CWM.

Yes, I did too with CWM, but to restore my phone to a state before i rooted can I use your dump and flash it via odin or do I flash it via cwm? Or do i need to donwload the official firmware from the link you gave me before?

linkultima said:
Yes, I did too with CWM, but to restore my phone to a state before i rooted can I use your dump and flash it via odin or do I flash it via cwm? Or do i need to donwload the official firmware from the link you gave me before?
Click to expand...
Click to collapse
Get it from the link I said in the earlier post. This is just the dump, not the firmware so you can't load it as it is. I suggest using Odin once you have the firmware.

Thanx, will do.

Can you upload only the SystemUI.apk
offtopic: I have a couple of friends with transparent notification bar, came that way default, even the same operator as mine, but mine is black...

newalopez said:
Can you upload only the SystemUI.apk
offtopic: I have a couple of friends with transparent notification bar, came that way default, even the same operator as mine, but mine is black...
Click to expand...
Click to collapse
Sorry about the wait, I just checked up on the thread and found your request: https://www.dropbox.com/s/w95a7ckgkpvpyhj/SystemUI.apk

Hello, I'm new here in the forum and would like to know where I find a tutorial explaining how to flash. I saw some Rooms here that interested me, but do not know where to start. My phone is a Samsung Galaxy i9500 brings originally a firmware with the characteristics of your room (I9500UBUAMDE). I would be grateful for a answer.

D805 Return to Stock using TWRP

For those who having problem return to stock using Flash tools
here the recovery rom for G2 D805 16GB that can be flashed using TWRP.
ROM include:
aboot.img
boot.img
cust.img
dbi.img
laf.img
misc.img
modem.img
persist.img
recovery.img
rpm.img
sbl1.img
system.img
tz.img
After flashing your phone will back to 4.2.2 with D80510A rom.
You will loose root and custom recovery after flashing.
1. Download ROM
2. Wipe cache, data, system, dalvik
3. Flash ROM
4. Reboot the system
5. Enjoy back to stock.
Download:
https://drive.google.com/folderview?id=0B3WrKXdyDEhVbWtMOFhveWlmbnM&usp=sharing

a great idea!! is it possible to do this for a ukd802 or would it be a completely different? anyhow im sure there will be people jumping at the chance to be able to do someting as simple as this to get back to stock there seems to be a lot of people having problems with kit kat and associated and we really ought to have a few different variants of this a really good idea,thanks for posting.

martindar said:
a great idea!! is it possible to do this for a ukd802 or would it be a completely different? anyhow im sure there will be people jumping at the chance to be able to do someting as simple as this to get back to stock there seems to be a lot of people having problems with kit kat and associated and we really ought to have a few different variants of this a really good idea,thanks for posting.
Click to expand...
Click to collapse
It is possible, but i don't have 802 phone to test.

There needs to be one of these for all models. Can you possibly make it available for the Verizon's lg g2?
Sent from my iPhone using Tapatalk

Esteway.619 said:
There needs to be one of these for all models. Can you possibly make it available for the Verizon's lg g2?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Sorry, but i only have 805 for testing. But you can use this rom, just replace all .img inside it from Verizon .kdz or .tot

sashavegas said:
Sorry, but i only have 805 for testing. But you can use this rom, just replace all .img inside it from Verizon .kdz or .tot
Click to expand...
Click to collapse
So first we unzip ur rom,then we use that tot/kdz extractor tool n extract the vs980 kdz/tot and replace all the img files from ur rom w the img files from the vs980 kdz then zip it back up right?
edit: oh also does this wipe internal storage like actually flashing a tot/kdz or do you keep the stuff on data/media?

Yes this is correct.
And by doing this will wipe everything, the same as flashing kdz
blazewit said:
So first we unzip ur rom,then we use that tot/kdz extractor tool n extract the vs980 kdz/tot and replace all the img files from ur rom w the img files from the vs980 kdz then zip it back up right?
edit: oh also does this wipe internal storage like actually flashing a tot/kdz or do you keep the stuff on data/media?
Click to expand...
Click to collapse

What if we were on kitkat can we flash anyway??
Sent from my LG-D805 using XDA Free mobile app

sashavegas said:
Yes this is correct.
And by doing this will wipe everything, the same as flashing kdz
Click to expand...
Click to collapse
Hey quick question. When i use the kdz extract tool i get all the different partitions but they are in .bin format instead of .img. how did u get the files converted to img files?

my phone is d805 and tried this rom but it says my phone not fully unrooted !!!! it means this rom not fully unroot and still cant get updates !!!! Any solution guys ???

blazewit said:
Hey quick question. When i use the kdz extract tool i get all the different partitions but they are in .bin format instead of .img. how did u get the files converted to img files?
Click to expand...
Click to collapse
just rename bin to img

alandd86 said:
my phone is d805 and tried this rom but it says my phone not fully unrooted !!!! it means this rom not fully unroot and still cant get updates !!!! Any solution guys ???
Click to expand...
Click to collapse
that is strange, since the rom will overwrite everything.

sashavegas said:
that is strange, since the rom will overwrite everything.
Click to expand...
Click to collapse
Could the ota root keeper feature on super su and similar apps cause that?

blazewit said:
Could the ota root keeper feature on super su and similar apps cause that?
Click to expand...
Click to collapse
If you get this thing working, you better make a thread in the Verizon forum for it. The lg tool can suck it.
Sent from my Vs980 running CloudyFlex 2.2

sashavegas said:
just rename bin to img
Click to expand...
Click to collapse
Sorry to keep bugging you bro but if i was to use a img creator tool to combine this the various bin files, (minus the laf.bin to keep access to fastboot) into 1 img file could it then be flashed using fast boot?

sashavegas said:
that is strange, since the rom will overwrite everything.
Click to expand...
Click to collapse
when i update it says not ota for rooted phones !!

Help me hard brick

My phone is sph l520. I flash sbl2, sbl3, aboot, tz via adb. While it restart, it is black screen and my computer show qhsusb_dload. I try to find way to repair it but no box support my phone. I find this thread.. Can anyone use this phone help me creatting debrick.img for firmware 4.2 and 4.4 because i don't know what my bootloader ? Thanks for read.

Please help me

Can anyone use terminal and jump first partition on your device and send to me ? You can use EFS Professional on google. Thanks.

Adb to flash Samsung devices that's new for me hope you find debrick.IMG soon.
:bump:

fburgos said:
Adb to flash Samsung devices that's new for me hope you find debrick.IMG soon.
:bump:
Click to expand...
Click to collapse
You can use EFS Professional on xda. It's free and easy to use. You must root your phone. You can backup all partition of device and send to me. It's also helpful for you. Thanks for help.

fburgos said:
Adb to flash Samsung devices that's new for me hope you find debrick.IMG soon.
:bump:
Click to expand...
Click to collapse
Can you send me your backup. It's helpful for me and anyone.

LG G4 stuck at LG LOGO screen cannot flash back stock img

HI,I am having LG F500L,running Android 5.1,build number LMY47D,sofware version F500L09a. At first, I backup my system img to the phone memory. I typed these commands
Send_Command.exe \\.\COM3
then type id
dd if=/dev/block/mmcblk0 bs=8192 skip=65536 count=548352 of=/data/media/0/system.img.
After done, I opened my phone storage then there is a file named system.img.
Then I downloaded rooted img F500L10w online provided by a forumer. I renamed it to system2.img and copy it to phone storage. Then I open cmd typed these commands
Send_Command.exe \\.\COM3
then type id
dd if=/data/media/0/system.img bs=8192 seek=65536 count=548352 of=/dev/block/mmcblk0
After done, my phone reboot and stuck at LG Logo screen.
OK,then i want to flash back my stock system.img. I type these commands again.
Send_Command.exe \\.\COM3
then type id
usually it will show uid=0(root) gid=0(root) context=u:r:recovery:s0 , but there straight show # after 1 seconds.
Then i type dd if=/data/media/0/system.img bs=8192 seek=65536 count=548352 of=/dev/block/mmcblk0
after 1 second it show #
Now my phone stuck at LG Logo screen. I cannot flash back to stock img. Can i know how to solve this?Thanks.

Search the general thread.. your answer is somewhere there, someone made a thread on how to go back...also if it comes back immediately then do it again and again it will eventually work.

Same situation, using F500L 09a, ROOTED, and flash the 10w -> get stucked on LG logo
No way to restore the backup system.img, so, is it bricked? Any solution? Thanks.

ardatdat said:
Same situation, using F500L 09a, ROOTED, and flash the 10w -> get stucked on LG logo
No way to restore the backup system.img, so, is it bricked? Any solution? Thanks.
Click to expand...
Click to collapse
Yes, i try flashed H81510B kdz in download mode and managed to boot into phone but there is a problem no phone signal..

kwan788 said:
Yes, i try flashed H81510B kdz in download mode and managed to boot into phone but there is a problem no phone signal..
Click to expand...
Click to collapse
got some progress?
on another topic, we have more users with the same problem, including me.
After the flash 815 firmaware, you get back the original system.img?
tks

redhatux said:
got some progress?
on another topic, we have more users with the same problem, including me.
After the flash 815 firmaware, you get back the original system.img?
tks
Click to expand...
Click to collapse
After flashing 815 firmware,i boot into phone connect to pc and copy my original system.img to phone storage that i backup before flash. And i flash it again. It still same stuck at LG Logo. So, I flashed back 815 firmware. You can try find stock system.img from other people and call them share with you. Then put it in phone storage to flash. Hope that can help u.

kwan788 said:
Yes, i try flashed H81510B kdz in download mode and managed to boot into phone but there is a problem no phone signal..
Click to expand...
Click to collapse
kwan788 said:
After flashing 815 firmware,i boot into phone connect to pc and copy my original system.img to phone storage that i backup before flash. And i flash it again. It still same stuck at LG Logo. So, I flashed back 815 firmware. You can try find stock system.img from other people and call them share with you. Then put it in phone storage to flash. Hope that can help u.
Click to expand...
Click to collapse
I created the backup system.img for granted before this, so I have.
But you said it still did not work. that's it?
After the flash 815, you could use adb and the "send command" to flash your system.img?
tks

redhatux said:
I created the backup system.img for granted before this, so I have.
But you said it still did not work. that's it?
After the flash 815, you could use adb and the "send command" to flash your system.img?
tks
Click to expand...
Click to collapse
I tried use adb and the "send command" to flash my backup system.img. My phone still stuck at LG Logo. Because the system partition already changed to H815 and does not same with F500L so it cannot works. Now i rooted my phone and still finding solution to flash back the modem file to get phone signal.

kwan788 said:
I tried use adb and the "send command" to flash my backup system.img. My phone still stuck at LG Logo. Because the system partition already changed to H815 and does not same with F500L so it cannot works. Now i rooted my phone and still finding solution to flash back the modem file to get phone signal.
Click to expand...
Click to collapse
Hi there i have the same issue as you no phone function flashed the 815 firmware with an lf f500l model. Have you found a solution to get the signal back for phone
cheers
mark

http://forum.xda-developers.com/showthread.php?t=3172724
Im in the same exact situation.
It looks like we can use h815 10b kdz but loose signal strength. But it boots.
We need to figure out how to backup f500l original partitions, as much as we can before so we can restore it all afterwards.
Need to figure out how to calculate bs, skip, count ect.. Of each partition. Not sure exact what we absolutely need. Assuming system, boot, modems at minimum.
---------- Post added at 09:33 AM ---------- Previous post was at 09:26 AM ----------
kwan788 said:
HI,I am having LG F500L,running Android 5.1,build number LMY47D,sofware version F500L09a. At first, I backup my system img to the phone memory. I typed these commands
Send_Command.exe \\.\COM3
then type id
dd if=/dev/block/mmcblk0 bs=8192 skip=65536 count=548352 of=/data/media/0/system.img.
After done, I opened my phone storage then there is a file named system.img.
Then I downloaded rooted img F500L10w online provided by a forumer. I renamed it to system2.img and copy it to phone storage. Then I open cmd typed these commands
Send_Command.exe \\.\COM3
then type id
dd if=/data/media/0/system.img bs=8192 seek=65536 count=548352 of=/dev/block/mmcblk0
After done, my phone reboot and stuck at LG Logo screen.
OK,then i want to flash back my stock system.img. I type these commands again.
Send_Command.exe \\.\COM3
then type id
usually it will show uid=0(root) gid=0(root) context=u:r:recovery:s0 , but there straight show # after 1 seconds.
Then i type dd if=/data/media/0/system.img bs=8192 seek=65536 count=548352 of=/dev/block/mmcblk0
after 1 second it show #
Now my phone stuck at LG Logo screen. I cannot flash back to stock img. Can i know how to solve this?Thanks.
Click to expand...
Click to collapse
What I dont understand is why your phone doesnt work. Because according to what you posted here is what you really did. You flashed your own backup system.img and not the rooted system2.img. So your phone should have stayed as it was.
Unless youve mistyped..
---------- Post added at 09:34 AM ---------- Previous post was at 09:33 AM ----------
skyelm said:
Search the general thread.. your answer is somewhere there, someone made a thread on how to go back...also if it comes back immediately then do it again and again it will eventually work.
Click to expand...
Click to collapse
F500L does not have kdz or tot to go back to stock. So that doesn't work for us.

OR we need someone with a working F500L to back up his or her system, boot and modem partitions and share with us

clockcycle said:
OR we need someone with a working F500L to back up his or her system, boot and modem partitions and share with us
Click to expand...
Click to collapse
I have the modem file..if u want, i can send u..

kwan788 said:
I have the modem file..if u want, i can send u..
Click to expand...
Click to collapse
Thats awesome. For 9a or 10a? Did you get boot.img as well?
If you could link it in the thread it would be great and might help others that need it as well.
Have you been able to get yours to work again?
Should be 3 modem partitions, how did you get them? Id like to back mine up too.

clockcycle said:
Thats awesome. For 9a or 10a? Did you get boot.img as well?
If you could link it in the thread it would be great and might help others that need it as well.
Have you been able to get yours to work again?
Should be 3 modem partitions, how did you get them? Id like to back mine up too.
Click to expand...
Click to collapse
F500L modem is all same..i get the files from my friends..last time i try flashed but failed and stucked at logo..maybe the modem partition size is different..need to flash full partition..
https://drive.google.com/folderview?id=0B3Ja39DEW20TflZIV19Xcm05YTFzcm9FR0huWVc2dzVIamg3UWUxazVuY05QSFdDaUVlQTQ&usp=sharing

kwan788 said:
F500L modem is all same..i get the files from my friends..last time i try flashed but failed and stucked at logo..maybe the modem partition size is different..need to flash full partition..
https://drive.google.com/folderview...c2dzVIamg3UWUxazVuY05QSFdDaUVlQTQ&usp=sharing
Click to expand...
Click to collapse
I think we need to restore boot.img also.

clockcycle said:
I think we need to restore boot.img also.
Click to expand...
Click to collapse
I created the topic with the procedures to restore the baseband f500L.
Tested 100%.
http://forum.xda-developers.com/g4/general/lg-g4-f500l-restore-signal-flash-815-t3214574

LG G4 H815 V10b-SEA Root Methods?

Any safe root for H815 V10b-SEA variant??
Is there any easy root for H815 SEA (Singapore) variant?
Dont want to unlock my bootloader. Cant find any thread for H815 SEA please help

Same here.. H815sea version no updates no easy root
Sent from my LG-H815 using Tapatalk

miyuru4u said:
Same here.. H815sea version no updates no easy root
Sent from my LG-H815 using Tapatalk
Click to expand...
Click to collapse
Thats really sad im still waiting to root my phone. But support for H815 SEA is very low :crying::crying:

I have a Taiwanese version...I have root. I wanted a different rom as well so I installed MS7's rom here: http://forum.xda-developers.com/g4/development/h815-eu-l-p-t-sea-twn-t3176195

Pretty sure you can root that model check the easy root method. Im on H185T Australian and have root
Sent from my LG-H815 using Tapatalk

But i need confirmation from a SEA variant holder.
Sent from my LG-H815

As I understand it the low effort root works with the SEA variant. Is there any downsides to flashing the EU image on the SEA device?

I'm a SEA variant holder here.
It's fine, you can use the Low Effort Root method. You can also flash the EU open KDZ without any problem.
You lose VoLTE, but to me it doesn't matter so I don't really care.
I'm running the latest 10E ATM, and it's much much better than 10B, so flash away.

If you don't want to loose anything you have to inject root yourself. You need linux for this.
http://forum.xda-developers.com/g4/general/lg-g4-100-root-success-directives-root-t3180586
This guide describes how to backup your system partition to an img file.
Then you have to use linux to inject root. You will get a rooted img file.
You can then copy the file back to your system partition.
If you want to check your "dd" parameters, you can use my guide to calculate your values:
http://forum.xda-developers.com/g4/help/how-to-determine-dd-parameters-lg-g4-t3184867
IMPORTANT:
Backup your files before doing this steps!
If you don't know what you are doing, wait for someone else to do it.
Download the kdz for your phone, so you can flash the stock rom if it doesn't work.
Do you have some experience with linux?

SEA Variant user here. Singapore set also. No issues when flashing in regards to rooting part.
If you just want to root, you could just take up flashing either via the Low Effort Root, or you could go for alternatives like the rooted system image that I have created or others, but make sure they are using EU OPEN KDZ in case of conflicting basebands and such.
And if you are going to upgrade to 10d/10e, I'd suggest downloading the KDZ, normal flash it, so that you can get your baseband and kernel updated before flashing the root image of your choice.

Indicious Flow said:
SEA Variant user here. Singapore set also. No issues when flashing in regards to rooting part.
If you just want to root, you could just take up flashing either via the Low Effort Root, or you could go for alternatives like the rooted KDZ that I have created or others, but make sure they are using EU OPEN KDZ in case of conflicting basebands and such.
And if you are going to upgrade to 10d/10e, I'd suggest downloading the KDZ, normal flash it, so that you can get your baseband and kernel updated before flashing the root image of your choice.
Click to expand...
Click to collapse
How did you create a rooted kdz?
Is there a guide or a tool to do this?

dominik-p said:
How did you create a rooted kdz?
Is there a guide or a tool to do this?
Click to expand...
Click to collapse
Go look it up at the General page
Over here! -> http://forum.xda-developers.com/g4/general/lg-g4-100-root-success-directives-root-t3180586

I am still at V10b
Keeping trying to see if any update available every day but nothing . I am "still using the latest version" the update center says.
When did you get the update please?
Aoi_sora9x said:
I'm running the latest 10E ATM, and it's much much better than 10B, so flash away.
Click to expand...
Click to collapse

Indicious Flow said:
Go look it up at the General page
Over here! -> http://forum.xda-developers.com/g4/general/lg-g4-100-root-success-directives-root-t3180586
Click to expand...
Click to collapse
This is not a how to root a kdz.
This is how to root the system.img.
I know the guide.
http://forum.xda-developers.com/showpost.php?p=62704051&postcount=9
I think you know what the difference is?
The kdz is a packed file which contains system, modem, boot,... files.
The system.img is an raw image of the system partition.
To root a kdz, you had to unpack it, inject root, repack it, create new checksums,....
That's a complex precess...
So I guess you don't know how to root a kdz?
---------- Post added at 05:25 PM ---------- Previous post was at 05:11 PM ----------
mic141414 said:
I am still at V10b
Keeping trying to see if any update available every day but nothing . I am "still using the latest version" the update center says.
When did you get the update please?
Click to expand...
Click to collapse
You can download the latest version as a kdz.
Use this link and enter your IMEI:
Code:
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=IMEI
You will get a download link.
Type
csmgdl.lgmobile.com/dn/downloader.dev?fileKey=
instead of
pkg03.lime.gdms.lge.com/dn/downloader.dev?fileKey=
to download the file.
Then you can use the LG Flash Tool to flash the kdz to your phone.
You will loose root. Don't know if you have root.
You will have to root you phone again, but with the appropriate system img.
(Or inject root yourself...)

Thank you
I tried and I got "/H81510B_00.kdz"
Same as what i have now
???
I don't have root yet anyway but wanted the latest os available.
Don't know why the latest does not appear
dominik-p said:
---------
You will get a download link.
Type
csmgdl.lgmobile.com/dn/downloader.dev?fileKey=
instead of
pkg03.lime.gdms.lge.com/dn/downloader.dev?fileKey=
to download the file.
Then you can use the LG Flash Tool to flash the kdz to your phone.
You will loose root. Don't know if you have root.
You will have to root you phone again, but with the appropriate system img.
(Or inject root yourself...)
Click to expand...
Click to collapse

dominik-p said:
This is not a how to root a kdz.
This is how to root the system.img.
I know the guide.
http://forum.xda-developers.com/showpost.php?p=62704051&postcount=9
I think you know what the difference is?
The kdz is a packed file which contains system, modem, boot,... files.
The system.img is an raw image of the system partition.
To root a kdz, you had to unpack it, inject root, repack it, create new checksums,....
That's a complex precess...
So I guess you don't know how to root a kdz?
---------- Post added at 05:25 PM ---------- Previous post was at 05:11 PM ----------
You can download the latest version as a kdz.
Use this link and enter your IMEI:
Code:
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=IMEI
You will get a download link.
Type
csmgdl.lgmobile.com/dn/downloader.dev?fileKey=
instead of
pkg03.lime.gdms.lge.com/dn/downloader.dev?fileKey=
to download the file.
Then you can use the LG Flash Tool to flash the kdz to your phone.
You will loose root. Don't know if you have root.
You will have to root you phone again, but with the appropriate system img.
(Or inject root yourself...)
Click to expand...
Click to collapse
For your info, creating a rooted KDZ is currently not possible. If it was people would have done it already. And yes I do know the procedures to unpacking and repacking a KDZ for your info If it was possible to done it, I wouldn't be posting rooted images of just the system image itself and would have provided people with the rooted KDZ to save their time And also from what I know, I don't think there is any way for you to apply a root package in a KDZ and flash it together due to the modified md5 sum and such.

Indicious Flow said:
For your info, creating a rooted KDZ is currently not possible. If it was people would have done it already. And yes I do know the procedures to unpacking and repacking a KDZ for your info If it was possible to done it, I wouldn't be posting rooted images of just the system image itself and would have provided people with the rooted KDZ to save their time And also from what I know, I don't think there is any way for you to apply a root package in a KDZ and flash it together due to the modified md5 sum and such.
Click to expand...
Click to collapse
Ok. So we understand each other
I just wondered how you did it, because you wrote:
or you could go for alternatives like the rooted KDZ that I have created
Click to expand...
Click to collapse
But I saw you just edited your post.
---------- Post added at 06:03 PM ---------- Previous post was at 05:55 PM ----------
mic141414 said:
Thank you
I tried and I got "/H81510B_00.kdz"
Same as what i have now
???
I don't have root yet anyway but wanted the latest os available.
Don't know why the latest does not appear
Click to expand...
Click to collapse
Then it seems that only V10b is available for your phone.
Other users flashed the EU image which is 10e.
But why do you need an update?
If everything is working fine you shouldn't need an update.

Thanks for the info guys. I'm going to take a few days to digest. If I can ask a quick question without starting a new thread. Does the adb backup, backup the system partition as well or just data and apps?

Megazone38 said:
Thanks for the info guys. I'm going to take a few days to digest. If I can ask a quick question without starting a new thread. Does the adb backup, backup the system partition as well or just data and apps?
Click to expand...
Click to collapse
No adb backup can not backup your system partition.
It can only backup program settings, apps and data.
To backup your system partition, you need (the Send_Command.exe and) the "dd" command.

I have already rooted using the low effort root method. Used a pre-rooted system image. Still on 10b-SEA. everything works fine. Xposed is also working.
Sent from my LG-H815