Related
Hey gang, I can't seem to connect my LG to my laptop. I had the GS3 and it never was able to connect I thought it was because Samsung and Apple didn't get along that they made the connection difficult. But now I have the LG and its the same thing, it doesn't want to connect. Is there something on my computer or is it the phone?
johnny quest said:
Hey gang, I can't seem to connect my LG to my laptop. I had the GS3 and it never was able to connect I thought it was because Samsung and Apple didn't get along that they made the connection difficult. But now I have the LG and its the same thing, it doesn't want to connect. Is there something on my computer or is it the phone?
Click to expand...
Click to collapse
Hello! You can find the drivers you would need and I would suggest installing the LG PC Suite, from here..
http://mobilepcsuite.com/lg-g3-pc-suite-465
After installing these, and your laptop doesn't recognizes the phone then there could be old drivers blocking you from connecting your LG phone.. OR bad USB connections ( check your USB ports ).. Good luck
Showtek1980 said:
Hello! You can find the drivers you would need and I would suggest installing the LG PC Suite, from here..
http://mobilepcsuite.com/lg-g3-pc-suite-465
After installing these, and your laptop doesn't recognizes the phone then there could be old drivers blocking you from connecting your LG phone.. OR bad USB connections ( check your USB ports ).. Good luck
Click to expand...
Click to collapse
Thank you so much, I'm DL now. I hope it works.
johnny quest said:
Thank you so much, I'm DL now. I hope it works.
Click to expand...
Click to collapse
You're welcome Let me know what happens after you've installed the drivers and the LG G3 PC Suite :good:
Showtek1980 said:
You're welcome Let me know what happens after you've installed the drivers and the LG G3 PC Suite :good:
Click to expand...
Click to collapse
its not working. I was able to install the PC suite and it couldn't find my phone when trying to connect.
johnny quest said:
its not working. I was able to install the PC suite and it couldn't find my phone when trying to connect.
Click to expand...
Click to collapse
Have you installed your phone drivers from that site? Try connecting another USB device such as a flash drive or something to check if your ports are working well. Reboot your laptop with the phone plugged in.. See what happens.. Next step is to try connecting your phone to a pc or another laptop.. Your USB ports could be damaged.
Showtek1980 said:
Have you installed your phone drivers from that site? Try connecting another USB device such as a flash drive or something to check if your ports are working well. Reboot your laptop with the phone plugged in.. See what happens.. Next step is to try connecting your phone to a pc or another laptop.. Your USB ports could be damaged.
Click to expand...
Click to collapse
my other USB connection work. I rebooted and it gives me that little sound that its connected but "Charging" nothing far as MTP. This is frustrating. I always have to use Airdroid in order for me to sync my pics or any other files.
johnny quest said:
my other USB connection work. I rebooted and it gives me that little sound that its connected but "Charging" nothing far as MTP. This is frustrating. I always have to use Airdroid in order for me to sync my pics or any other files.
Click to expand...
Click to collapse
Try this http://www.mylgphones.com/download-and-install-the-usb-drivers-for-lg-g3-on-windows-and-mac.html
Check your USB ports under Device Manager on your laptop and uninstall those with yellow exclamation marks ( if any ).
BTW.. after you connect the device to your laptop and use the pull-down menu.. Do you get the 3 options ..
Charge Phone , Media Device (MTP) and Send Images (PTP)?
Showtek1980 said:
Try this http://www.mylgphones.com/download-and-install-the-usb-drivers-for-lg-g3-on-windows-and-mac.html
Check your USB ports under Device Manager on your laptop and uninstall those with yellow exclamation marks ( if any ).
BTW.. after you connect the device to your laptop and use the pull-down menu.. Do you get the 3 options ..
Charge Phone , Media Device (MTP) and Send Images (PTP)?
Click to expand...
Click to collapse
Thanks I went there and still nothing. I have a Macbook Air. I do get those 3 charging options
johnny quest said:
Thanks I went there and still nothing. I have a Macbook Air. I do get those 3 charging options
Click to expand...
Click to collapse
Damn bro! If those files didn't help then I'm afraid I have no more options or suggestions..Usually, it's a driver issue but I have no clue about Mac and their drivers. .. Connect your phone to a laptop using Windows.. In that way you'll know if the device is faulty or not.
Let me know once you've got it resolved..Hopefully it'll be soon .. Good luck :fingers-crossed:
Showtek1980 said:
Damn bro! If those files didn't help then I'm afraid I have no more options or suggestions..Usually, it's a driver issue but I have no clue about Mac and their drivers. .. Connect your phone to a laptop using Windows.. In that way you'll know if the device is faulty or not.
Let me know once you've got it resolved..Hopefully it'll be soon .. Good luck :fingers-crossed:
Click to expand...
Click to collapse
I really appreciate your help. I do have another laptop thats HP so I usually connect it from there with my GS3 or use Airdroid for my mac. I wanted to see if I was able to connect to the Mac with my phone but its ok, thanks for your tips and advise. I will let you know if I get it installed and able to connect my phone to my Mac.
johnny quest said:
I really appreciate your help. I do have another laptop thats HP so I usually connect it from there with my GS3 or use Airdroid for my mac. I wanted to see if I was able to connect to the Mac with my phone but its ok, thanks for your tips and advise. I will let you know if I get it installed and able to connect my phone to my Mac.
Click to expand...
Click to collapse
Always a pleasure mate Enjoy your beast! I'm loving my rooted stock ROM. Waiting to hear good news from you in the near future :good:
johnny quest said:
I really appreciate your help. I do have another laptop thats HP so I usually connect it from there with my GS3 or use Airdroid for my mac. I wanted to see if I was able to connect to the Mac with my phone but its ok, thanks for your tips and advise. I will let you know if I get it installed and able to connect my phone to my Mac.
Click to expand...
Click to collapse
I had the same problem you had, but downloaded LGPCSuite and it worked. Let me know how it goes.
Go to -> ww w.mylgphones. com/lg-pc-suite-for-windows-and-mac
vale2628 said:
I had the same problem you had, but downloaded LGPCSuite and it worked. Let me know how it goes.
Go to -> ww w.mylgphones. com/lg-pc-suite-for-windows-and-mac
Click to expand...
Click to collapse
Thanks for the tips. I was able to download the LGPCSuite and when I do connect my phone and open the app it recognizes my phone, but all I can add to my phone are pics, videos, and music. I can't add any folders or anything else. Its not allowing me to see all my folders on my phone.
A weird solution that worked for me
I had the same problem. My g3 would only charge when connected via usb and only connect to pc suite via wifi.
I tried everything, but no luck.
In my case, the problem was that the usb cable, although it looked like it was nicely plugged in, it needed to be pressed down to make a right connection. If i just plug the usb cable, it just showed that the phone was charging.
But if i press the last part of the cable, just where it enters at the bottom of the phone, then all other option show up(like mtp etc), my windows system makes the familiar usb sound etc. If I give up the pressure, then back to charging only mode.
I hope this helps some of you. It is a bad usb port at the phone that caused the problem.
oiko2k said:
I had the same problem. My g3 would only charge when connected via usb and only connect to pc suite via wifi.
I tried everything, but no luck.
In my case, the problem was that the usb cable, although it looked like it was nicely plugged in, it needed to be pressed down to make a right connection. If i just plug the usb cable, it just showed that the phone was charging.
But if i press the last part of the cable, just where it enters at the bottom of the phone, then all other option show up(like mtp etc), my windows system makes the familiar usb sound etc. If I give up the pressure, then back to charging only mode.
I hope this helps some of you. It is a bad usb port at the phone that caused the problem.
Click to expand...
Click to collapse
Well Thanks, for the post, I know you didn't need to write all this when your phone was connected for good, but you did it because you knew there would also be some people like me in need of your help,
My friend has the same problem with his AT&T LG G3, it only charges when connected to PC and no other connection setups are shown neither on the phone nor in the PC/laptop so, and i have done all the things possible and i could thinks off.
Now i think i should try your method and will tell you if it also works for his G3 or not. Thanks by the way.
No idea why I'm having this issue, but my G4 won't connect to my windows 10 PC. I have lg drivers installed, LG bridge installed (and uninstalled) multiple USB outputs and USB cables but I'm am getting an error message that the PC does not recognise the device. How can I ensure my phone will connect to my computer?
Sent from my LG-H815 using XDA Free mobile app
have you enabled USB Debugging?
Toggled on/off. I can't connect download mode either. Tried multiple computers and windows 7 and 10 but no luck!
Sent from my LG-H815 using XDA Free mobile app
Fixed it. Revoked all previous USB permissions.
Sent from my LG-H815 using XDA Free mobile app
monkmeister901 said:
Fixed it. Revoked all previous USB permissions.
Sent from my LG-H815 using XDA Free mobile app
Click to expand...
Click to collapse
how you did that ? you can explain me plz
shudoha said:
how you did that ? you can explain me plz
Click to expand...
Click to collapse
Go to settings then general tab and scroll down click on Developer options. There is Revoke USB debugging authorisations, just touch that and click OK.
If you don't have developer options then
1. use a different cable/usb port
2. After plugging cable try changing connection to PTP wait 2 minutes then change it back to MTP
Sent from my LG-H815 using Tapatalk
skyelm said:
Go to settings then general tab and scroll down click on Developer options. There is Revoke USB debugging authorisations, just touch that and click OK.
If you don't have developer options then
1. use a different cable/usb port
2. After plugging cable try changing connection to PTP wait 2 minutes then change it back to MTP
Sent from my LG-H815 using Tapatalk
Click to expand...
Click to collapse
yes but i cant i have not access at android anymore i thought it was your case too
Hi, Unfortunately my Issue is little different. I used to get the MTP/PTP option after connecting my G4 to my PC. But lately am not getting such options at all. Just getting the charging notification that is meant for slow charging.
Any Help is most welcome.
---------- Post added at 08:43 PM ---------- Previous post was at 08:43 PM ----------
Hi, Unfortunately my Issue is little different. I used to get the MTP/PTP option after connecting my G4 to my PC. But lately am not getting such options at all. Just getting the charging notification that is meant for slow charging.
Any Help is most welcome.
With your phone plugged into your computer Go to Control Panel (in windows 10 right-click on start button > control panel) > Device Manager > Uninstall the LG G4 Drivers > Then on your LG G4 device Click the options menu button ellipsis top right (...) > click install drivers.
Hope it works
My LG G4 won't connect to my Win 7 machine but will connect to my xp machine. I've installed and uninstalled all the drivers. Hunted down drivers from my PC manufacturer (lenovo) called LG and worked with them for about an hour. I called T-mobile who were the most enthusiastic about resolving the problem, but they eventually referred me back to LG who punted. They said I should call back later!
Tried usb debugging with developer options, no luck either.
The drivers almost install. It shows 1 or 2 of four installs are ok, but then craps out.
Any help? I've been at this for 4 days.
Many thanks,
Mine never connects to Mac via AFT...I installed Asus File manager and transfer the files over Wifi.
At least that is possible.
I had the same problem, both in windows 8.1 and windows 10 (after upgrade). I finally got it working by going to the "Control Panel" -> "Devices and Printers", right-clicking on the G4 and choosing "Troubleshoot". This found a broken driver, it suggested a re-install of the driver which did the trick. I can now connect to LG Bridge. Don't know if this will fix your problem but it's worth a try.
Guys, I have spent countless of hours searching online for an issue I have after I did an update on my phone. The computer does not recognize my phone. I have tried 4 different PC's two of them with Windows 10 and 2 with Windows 7. The drivers are up to date on all 4 PC's. I have tried multiple USB cables. I have done master reset by wiping everything. I went to developer options and I forced the MTP protocol. The phone just charge. Does not give the icon on the status bar either. I have turned on USB debugging nothing either. I put my phone in download mode the computers does not recognize it either. All the computers say not recognized. Have any of you experienced this issue and if so, how did you fix it? I'm starting to believe it's a hardware issue.
llaugerm said:
Guys, I have spent countless of hours searching online for an issue I have after I did an update on my phone. The computer does not recognize my phone. I have tried 4 different PC's two of them with Windows 10 and 2 with Windows 7. The drivers are up to date on all 4 PC's. I have tried multiple USB cables. I have done master reset by wiping everything. I went to developer options and I forced the MTP protocol. The phone just charge. Does not give the icon on the status bar either. I have turned on USB debugging nothing either. I put my phone in download mode the computers does not recognize it either. All the computers say not recognized. Have any of you experienced this issue and if so, how did you fix it? I'm starting to believe it's a hardware issue.
Click to expand...
Click to collapse
Did you solve your problem? What did you do? I have the same here, i tried many cables and many pcs and I can't get my LG G4 as MTP on PC. ):
pedrowood said:
Did you solve your problem? What did you do? I have the same here, i tried many cables and many pcs and I can't get my LG G4 as MTP on PC. ):
Click to expand...
Click to collapse
Could you try FWUL? I would like to know if this could help you.
http://tinyurl.com/FWULatXDA
#
Sent from my LG-H815 using XDA Labs
steadfasterX said:
Could you try FWUL? I would like to know if this could help you.
#
Sent from my LG-H815 using XDA Labs
Click to expand...
Click to collapse
Didn't work for me. It doesn't detect my phone either. Not even in download-mode, debugging on/off, no way.
pedrowood said:
Didn't work for me. It doesn't detect my phone either. Not even in download-mode, debugging on/off, no way.
Click to expand...
Click to collapse
I returned mines since I have warranty through T-Mobile
pedrowood said:
Didn't work for me. It doesn't detect my phone either. Not even in download-mode, debugging on/off, no way.
Click to expand...
Click to collapse
Could you try the new release? There were many fixes regarding detection and maybe it works for you now.
Sent from my LG-H815 using XDA Labs
I think my problem isn't the system, or my pc. It's what makes the connection android>pc but not the USB cable, the software that makes it may be the problem. But I'll try it sooner.
I still have this problem, but now I can change between the USB cable modes, not from notification but using the app "QuickShortCutMaker", now I don't receive any notification of connection on pc, no problems or not recognizing. I'll try FWUL again. Does someone know what to do now?
My USB debugging option won't stay on. I had to flip the switch repeatedly, disconnect and reconnect the usb cable, for ADB to register the device and it will turn itslef off within minutes even if i don't leave the developer settings page. Reboot didn't help either.
devilrulz4ever said:
My USB debugging option won't stay on. I had to flip the switch repeatedly, disconnect and reconnect the usb cable, for ADB to register the device and it will turn itslef off within minutes even if i don't leave the developer settings page. Reboot didn't help either.
Click to expand...
Click to collapse
I just want to ask why do you need USB debugging?
Sent from my Honor 8 pro using Tapatalk
K.khiladi said:
I just want to ask why do you need USB debugging?
Sent from my Honor 8 pro using Tapatalk
Click to expand...
Click to collapse
Android app development. I had to turn on the option again and again for a few time before it was fixed itself. I am not sure how, now i only have to select a popup evertime i connect the phone to pc not the debugging setting.
Nikhilmaurya10 said:
Android app development. I had to turn on the option again and again for a few time before it was fixed itself. I am not sure how, now i only have to select a popup evertime i connect the phone to pc not the debugging setting.
Click to expand...
Click to collapse
A couple of issues on my phone fixed themselves, I am waitng when this will do it too.
K.khiladi said:
I just want to ask why do you need USB debugging?
Sent from my Honor 8 pro using Tapatalk
Click to expand...
Click to collapse
For apps like titanium backup, root call blocker, etc.
Rommco05 said:
I think this is normal, some like on Honor 8 and Honor 9
Click to expand...
Click to collapse
I don't think this should be considered normal for any phone
Rommco05 said:
Probably can be fixed when is allowed this options but phone must be connected in same pc
Click to expand...
Click to collapse
That comes after your device is acknowledged by adb. There's no problem in maintaining adb connection. Turning debugging on and keeping it on is the problem.
devilrulz4ever said:
That comes after your device is acknowledged by adb. There's no problem in maintaining adb connection. Turning debugging on and keeping it on is the problem.
Click to expand...
Click to collapse
This is normal in EMUI. Huawei set this behavior maybe as a security feature. Saw this behavior in Honor 5X, 6X, and 8.
Sent from my Honor 8 using XDA Labs
devilrulz4ever said:
I don't think this should be considered normal for any phone
Click to expand...
Click to collapse
this is ok bro, same here in my H8
This dialog doesn't appear.
Rommco05 said:
Probably can be fixed when is allowed this options but phone must be connected in same pc
Click to expand...
Click to collapse
After connecting to the Pc and Enabled USB debugging switch, this dialog doesn't appear for me.
If I connect other devices it's working.
Hi everyone, I wanted to know if this problem was related to a software problem or is it my a52s broken something in hardware
when i connect a cable type-c both side on my pc the data when i connect the mobile phone to a type c port on my pc the peripheral connects and disconnects in quick succession, this only happens when i connect it to a supported type-c port
I have done several tests and I can confirm that the problem is the cell phone, with another cell phone the problem does not exist and I can reach the classic speeds of the type-c gen 2
currently the a52s mobile phone is equipped with android 11 with the one ui 3.1 with root
if someone can do some tests and verify the correct functioning of the port, I kindly ask you to write if you are on android 11 or android 12 with or without root permissions, thank you very much
Try playing with Developer options usb options.
If Developer options are already on, temporarily turn off.
Check Windows Event Viewer for error messages.
blackhawk said:
Try playing with Developer options usb options.
If Developer options are already on, temporarily turn off.
Check Windows Event Viewer for error messages.
Click to expand...
Click to collapse
already check this, on or off the dev option don't change anything. i try also the code *#0808# to change the parameters of the usb, but nothing, the problem still on.
raffybest94V01 said:
already check this, on or off the dev option don't change anything. i try also the code *#0808# to change the parameters of the usb, but nothing, the problem still on.
Click to expand...
Click to collapse
Event Viewer?
raffybest94V01
Did you conected the a52s to another pc to se if the result is the same???
TTmouse said:
raffybest94V01
Did you conected the a52s to another pc to se if the result is the same???
Click to expand...
Click to collapse
i don't have another pc with type c gen 2.
blackhawk said:
Event Viewer?
Click to expand...
Click to collapse
can you give me some apk for the event viewer ?
raffybest94V01 said:
can you give me some apk for the event viewer ?
Click to expand...
Click to collapse
Event Viewer is part of Windows built in management tools...
raffybest94V01 said:
i don't have another pc with type c gen 2.
Click to expand...
Click to collapse
According to the GSMArena listing for this phone, the USB controller only supports USB 2.0 speeds. Assuming this is correct, you will not get better speeds depending on which port of your PC you connect to, no matter how great the PC-side port and/or cable might be.
I'm having some trouble with Android Auto. My new OnePlus 11 will only connect "Charging Only" and will not connect for File Transfer / Android auto.
If I connect via USB and enable "USB Tether" it worked for a second, enough to pop Android Auto, and then disables...
It did work for a phone-to-phone transfer using OnePlus's transfer app!
What else have I tried:
1) Hard reset to factory
2) developer mode - I just tried editing the default connection mode (after enabling developer mode) and still nothing.
3) USB monitor - Indeed I have also tried a USB monitor, and nada. It connects to power and then disconnects immediately.
Verification! Both my car and the monitor connected perfectly with no additional config to my OnePlus 9, and my Oneplus 7 Pro today.
Any suggestions?
Exact same problem here...after trying to connect nothing happens (in Skoda Kamiq). Phone says it's connected to android auto. Strange things is it works without problems in my other car (Toyota Aygo). Seems like a compatibility issue in with car hardware or software. Probably a system update is needed to fix this sinds it's a new phone.
Is USB Debugging in Developer Mode On or Off?
azsl1326 said:
Is USB Debugging in Developer Mode On or Off?
Click to expand...
Click to collapse
It's off
Tijmenh said:
It's off
Click to expand...
Click to collapse
Have you tried the newest APK version of Android Auto from APK Mirror?
Yep..9.0
USB Debug is not enabled
For me it's more than one device that does not work. Both Android Auto on my 2018 Nissan Leif and my external monitor. Both of which worked perfectly with my OnePlus 9.
What is OS?
Color OS look like aa can't use.
sCRIPTPER said:
What is OS?
Color OS look like aa can't use.
Click to expand...
Click to collapse
This is all retail OnePlus 11 with Oxygen 13 no mods.
When I plug the cable into my phone in the car, I got a pop-up screen asking what I want to do with the connection. One of the options is File Transfer / Android Auto. Does that happen for you?
azsl1326 said:
When I plug the cable into my phone in the car, I got a pop-up screen asking what I want to do with the connection. One of the options is File Transfer / Android Auto. Does that happen for you?
Click to expand...
Click to collapse
Sometimes. No effect.
It connects then immediately disconnects.
hinshelm said:
Sometimes. No effect.
It connects then immediately disconnects.
Click to expand...
Click to collapse
Somewhat of an obvious question, bit have you tried a different cable? Maybe the OP cable?
hinshelm said:
Sometimes. No effect.
It connects then immediately disconnects.
Click to expand...
Click to collapse
Yes, but makes no difference what option I choose. Besides that I got the same popup in my other car and it works fine.
azsl1326 said:
Somewhat of an obvious question, bit have you tried a different cable? Maybe the OP cable?
Click to expand...
Click to collapse
Yes, both the cable that worked with the OnePlus 9 and the cable that came with the Oneplus 11.
I'm having the same issue, very annoying. Do we just wait on a software update?
Jeroen257 said:
I'm having the same issue, very annoying. Do we just wait on a software update?
Click to expand...
Click to collapse
I spoke to support and they wanted to replace my device, by just returning it!
I would have to be without a device (I traded in my old one). I would likely move to Samsung rather than be without a phone. Then return it.
Suck...
hinshelm said:
I spoke to support and they wanted to replace my device, by just returning it!
I would have to be without a device (I traded in my old one). I would likely move to Samsung rather than be without a phone. Then return it.
Suck...
Click to expand...
Click to collapse
Damn, that sucks. Did you spoke to the support by mail? I spoke to them by chat and they just told me to send feedback in the Android Auto app..
Jeroen257 said:
Damn, that sucks. Did you spoke to the support by mail? I spoke to them by chat and they just told me to send feedback in the Android Auto app..
Click to expand...
Click to collapse
I phones them. We went through everything. It's 100% the phone as the same issue manifest with multiple devices. Car & Monitor.
I'm sure this is software related because it works in my other car. I wouldn't return my device to find out the new phone has the de problem. Also read alot about Samsung users (s23) with connection issues for Android Auto.
I'm somehow relieved it's a software problem so they CAN fix it, the question is, when..