Hello,
I am trying to upgrade my Zenfone 3 deluxe in Android 8.
But when I flash the .zip in recovery mode, I obtain thks error :
......
Checking for MD5 file...
Skipping MD5 check : no MD5 file found
Warning : No file_contexts
Device image SKU: WW
OTA image SKU: WW
Please use the right SKU for updating...
Updater process ended with ERROR 7
Error installing zip file ´/sdcard/UL-Z016_1-WW-15.0210.1804.47-user.zip'
My SKU is WW so it should be ok
To update, I flashed tbe .zip on asus official website in recovery mode.
For information, my phone is root and has its bootloader unlock.
Do you know why I have this error ?
Thanks in advance
Hedika- said:
Hello,
I am trying to upgrade my Zenfone 3 deluxe in Android 8.
But when I flash the .zip in recovery mode, I obtain thks error :
......
Checking for MD5 file...
Skipping MD5 check : no MD5 file found
Warning : No file_contexts
Device image SKU: WW
OTA image SKU: WW
Please use the right SKU for updating...
Updater process ended with ERROR 7
Error installing zip file ´/sdcard/UL-Z016_1-WW-15.0210.1804.47-user.zip'
My SKU is WW so it should be ok
To update, I flashed tbe .zip on asus official website in recovery mode.
Do you know why I have this error ?
Thanks in advance
Click to expand...
Click to collapse
Have you tried doing a wipe before flashing ? This fixes the error 7 on my zenfone 2.
Foi-racer said:
Have you tried doing a wipe before flashing ? This fixes the error 7 on my zenfone 2.
Click to expand...
Click to collapse
hello, thanks for your answer.
What kind of wipe are you talking about ? If possible i wouldnt like to erase my data.
Flash the oreo stock recovery with adb and then update. That's the way i updated to oreo
Ryder. said:
Flash the oreo stock recovery with adb and then update. That's the way i updated to oreo
Click to expand...
Click to collapse
Hello, thanks four your answer. What do you mean "then update ?"
For me the update is made when I flash the ROM...
Hedika- said:
Hello, thanks four your answer. What do you mean "then update ?"
For me the update is made when I flash the ROM...
Click to expand...
Click to collapse
Just install the firmware from asus website from recovery or from the notification after reboot
Im running into the same issue. can anyone confirm whether a phone wipe is necessary?
Nucl3arSnake said:
Im running into the same issue. can anyone confirm whether a phone wipe is necessary?
Click to expand...
Click to collapse
Hedika- said:
hello, thanks for your answer.
What kind of wipe are you talking about ? If possible i wouldnt like to erase my data.
Click to expand...
Click to collapse
Sory for the late answer, I don't confirm anything. But I ran into a similar issue with my zenfone 2 and it was a little while ago so I'm not 100% sure but I think it was just a regular factory wipe in twrp. So assuming you have everithing backed up I will sugest you give it a try.
I believe i may have found the solution, although id like to confirm something first, could you please pm me a picture of your Software Information tab inside of Settings > About > Software Information. Im specifically curious about your build number. It looks like Asus' method of catching those that Root/unlock their bootloader of hard coding a build number in when the device is no longer considered stock. so the Assert portion of the updater script will check these build value dates, and if it isnt above the required threshold, it throws Status 7.
Related
HI~ there,
My device is ASUS fonepad 7 LTE ME7230CL
Android version : 4.3
Kernel version : 3.4.43
I've try the way how to root ME372CG,
but I can't use the same way to root this,
Plz help~
newno5 said:
HI~ there,
My device is ASUS fonepad 7 LTE ME7230CL
Android version : 4.3
Kernel version : 3.4.43
I've try the way how to root ME372CG,
but I can't use the same way to root this,
Plz help~
Click to expand...
Click to collapse
HI,
could someone help?
thanks~~
Hi,
i need help on my ASUS FonePad 7 LTE ME7230CL. my unit is stuck on boot animation. is there any way that i could flash into stock rom? or any custom rom for fix?
TIA
newno5 said:
HI~ there,
My device is ASUS fonepad 7 LTE ME7230CL
Android version : 4.3
Kernel version : 3.4.43
I've try the way how to root ME372CG,
but I can't use the same way to root this,
Plz help~
Click to expand...
Click to collapse
p0p0y23 said:
Hi,
i need help on my ASUS FonePad 7 LTE ME7230CL. my unit is stuck on boot animation. is there any way that i could flash into stock rom? or any custom rom for fix?
TIA
Click to expand...
Click to collapse
Hi,
you can folo the folowing guide to root your asus fonepad: https://www.youtube.com/watch?v=nzliL08unoE
Press the thanks button if I helped pleas
Hi..
My case is different from the link you posted.. mine is stuck in Boot animation logo. any other link that can help me restore my Firmware back to stock rom? or atleast restore the current OS
thanks
p0p0y23 said:
Hi..
My case is different from the link you posted.. mine is stuck in Boot animation logo. any other link that can help me restore my Firmware back to stock rom? or atleast restore the current OS
thanks
Click to expand...
Click to collapse
can you acces recovery mode? or download mode? If you can, you can search for the stock rom and flash this one?
louis-JYG4t said:
can you acces recovery mode? or download mode? If you can, you can search for the stock rom and flash this one?
Click to expand...
Click to collapse
yes i can..but i can't find any links of STOCK ROM for this model. hope some one can help me to find one!
p0p0y23 said:
yes i can..but i can't find any links of STOCK ROM for this model. hope some one can help me to find one!
Click to expand...
Click to collapse
here you go, on the bottom of the first post: http://forum.xda-developers.com/showthread.php?t=2800023
In the same post, you can even update all the way to lollipop while you're doing updates
Hit thanks if I helped
louis-JYG4t said:
here you go, on the bottom of the first post: http://forum.xda-developers.com/showthread.php?t=2800023
In the same post, you can even update all the way to lollipop while you're doing updates
Hit thanks if I helped
Click to expand...
Click to collapse
Hi sir,
il check the whole post 1st..BTW i forgot to say that my tab is TW..you think me327cg will work on me7230cl? is that posible?
Thanks for your effort anyway.
Cheers!
What are the differences between the 2 devices?
louis-JYG4t said:
What are the differences between the 2 devices?
Click to expand...
Click to collapse
dont have any idea..but im afraid that flashing diffrent rom on a tab might get it bricked.
p0p0y23 said:
dont have any idea..but im afraid that flashing diffrent rom on a tab might get it bricked.
Click to expand...
Click to collapse
here are the specs of both devices:
http://www.asus.com/Tablets_Mobile/ASUS_Fonepad_7_ME372CG/specifications/
http://www.sogi.com.tw/mobile/pad/products/10975/spec-ASUS+Fonepad+7+LTE+ME7230CL
Everything relating cpu, memory, display size etc seems the same.
For as far I've seen the only differences are : bluetooth version, LTE and android version.
I think in the worst case you will just keep having the bootloop, or you won't be able to use LTE and/or bluetooth the way it should..
Either way, I don't take any responsibility's on me, but if it were me I would try it.
I searched for the specific rom for your device but I can't seem to find one...
louis-JYG4t said:
here are the specs of both devices:
http://www.asus.com/Tablets_Mobile/ASUS_Fonepad_7_ME372CG/specifications/
http://www.sogi.com.tw/mobile/pad/products/10975/spec-ASUS+Fonepad+7+LTE+ME7230CL
Everything relating cpu, memory, display size etc seems the same.
For as far I've seen the only differences are : bluetooth version, LTE and android version.
I think in the worst case you will just keep having the bootloop, or you won't be able to use LTE and/or bluetooth the way it should..
Either way, I don't take any responsibility's on me, but if it were me I would try it.
I searched for the specific rom for your device but I can't seem to find one...
Click to expand...
Click to collapse
Thanks for the info sir..
maybe i should try your suggestion..i will let you know what ever result i get.
i already tried but i cant find any too..
wish me luck!
oh BTW is there any prob if i flashed US sku's or other sku to TW sku?
p0p0y23 said:
Thanks for the info sir..
maybe i should try your suggestion..i will let you know what ever result i get.
i already tried but i cant find any too..
wish me luck!
oh BTW is there any prob if i flashed US sku's or other sku to TW sku?
Click to expand...
Click to collapse
well the sku's is somthing I won't be able to help with, I have no experience with it, sry..
Make sure to hit thanks
louis-JYG4t said:
well the sku's is somthing I won't be able to help with, I have no experience with it, sry..
Make sure to hit thanks
Click to expand...
Click to collapse
here is what i get after following this instruction.
1. Download and copy ME372CG_all_WW_user_V5.2.2.raw file to your external SD card
2. Turn Off your FonePad 7 and start Droid Boot (press and hold Volume up button and Power Button)
3. Select SD Download
4. Now your FonePad 7 will reboot and start flashing Build 5.2.2
5. After that when you are done refer to @MEHRDAD595 Rooting Thread here
6. After Rooting Download Partial Update file and rename it to dlpkgfile (make sure there is no extension)
7. Using Root Browser copy this file to /cache and make a new file in /cache/recovery named "command" (no quotes) edit it using text editor and enter following
e:No detect /sdcard/ASUS_bundle.zip file!
Installing demo content!
No detect APD image file. skip!
ERROR: Can't find image file
any help?
p0p0y23 said:
here is what i get after following this instruction.
1. Download and copy ME372CG_all_WW_user_V5.2.2.raw file to your external SD card
2. Turn Off your FonePad 7 and start Droid Boot (press and hold Volume up button and Power Button)
3. Select SD Download
4. Now your FonePad 7 will reboot and start flashing Build 5.2.2
5. After that when you are done refer to @MEHRDAD595 Rooting Thread here
6. After Rooting Download Partial Update file and rename it to dlpkgfile (make sure there is no extension)
7. Using Root Browser copy this file to /cache and make a new file in /cache/recovery named "command" (no quotes) edit it using text editor and enter following
e:No detect /sdcard/ASUS_bundle.zip file!
Installing demo content!
No detect APD image file. skip!
ERROR: Can't find image file
any help?
Click to expand...
Click to collapse
try the 2 official one at the bottom of the post, the complete bottom.
There is an official one for both sku versions.
If you would expect any raw to work, it would be the official from asus, no?
If you get one of these two to work, quickly make nandroid backup and then you can continu to flash the one you want, perhaps via official update or so
louis-JYG4t said:
try the 2 official one at the bottom of the post, the complete bottom.
There is an official one for both sku versions.
If you would expect any raw to work, it would be the official from asus, no?
If you get one of these two to work, quickly make nandroid backup and then you can continu to flash the one you want, perhaps via official update or so
Click to expand...
Click to collapse
i downloaded the official sir..i just follow this instruction.
p0p0y23 said:
i downloaded the official sir..i just follow this instruction.
Click to expand...
Click to collapse
I'm running out of ideas :s
download the file and follow the instructions from this site ( only the instructions in step 1) ): http://www.fonepad.me/downloads/
the piratebay link doesn't work, the link under does work.
louis-JYG4t said:
I'm running out of ideas :s
download the file and follow the instructions from this site ( only the instructions in step 1) ): http://www.fonepad.me/downloads/
the piratebay link doesn't work, the link under does work.
Click to expand...
Click to collapse
i got same error result sir..i guess this model requires different files for flashing (ASUS_BUNDLE.zip) because i try to rename the raw file it continue and rebooted the tab then execute ERASE. after that it prompts again for another sets of errors pertaining to unable to extract bla bla bla and errors can't fine media resource files.
maybe i should for the official release of asus.
Hm sory I gues won't be able to help :s
Hello together,
i got a MediaPad M2 801-W. It was running on Android 5.1.1.
So i just downloaded the 6.0 image for it. BUT i downloaded the M2-802Lxxx Version....
I dident know there are differne version of the Tablet....
The Updater just finished fine and the Tablet just started just normal BUT it is now random crashing and restarting the Os.
So i tried to install the correct version back but now the Updater in the os has no Local seetting to select the update.zip.
In Recovery the Updater works but dosent update the correct version.
It is verifying the update and than says "Software install failed".
Is there an other way to update the correct update to the tablet?
Sorry about my bad english....
Best Regards isi
isipisi281 said:
Hello together,
i got a MediaPad M2 801-W. It was running on Android 5.1.1.
So i just downloaded the 6.0 image for it. BUT i downloaded the M2-802Lxxx Version....
I dident know there are differne version of the Tablet....
The Updater just finished fine and the Tablet just started just normal BUT it is now random crashing and restarting the Os.
So i tried to install the correct version back but now the Updater in the os has no Local seetting to select the update.zip.
In Recovery the Updater works but dosent update the correct version.
It is verifying the update and than says "Software install failed".
Is there an other way to update the correct update to the tablet?
Sorry about my bad english....
Best Regards isi
Click to expand...
Click to collapse
Flash this in stock recovery through dload method:
https://drive.google.com/file/d/0B5I_q70mNuR4N3JLTnNDYzBEYTg/view?usp=sharing
Then you need the stock 801W rom, extract the update.app and flash it through dload. Then it should work and flash back to stock.
Thank you but your file has only 21kb is this right?
When i put the file in the dload directorie and boot with power + vol up + down the installer is verifying something installs it to 36% and aborts again. =(
isipisi281 said:
Hello together,
i got a MediaPad M2 801-W. It was running on Android 5.1.1.
So i just downloaded the 6.0 image for it. BUT i downloaded the M2-802Lxxx Version....
I dident know there are differne version of the Tablet....
The Updater just finished fine and the Tablet just started just normal BUT it is now random crashing and restarting the Os.
So i tried to install the correct version back but now the Updater in the os has no Local seetting to select the update.zip.
In Recovery the Updater works but dosent update the correct version.
It is verifying the update and than says "Software install failed".
Is there an other way to update the correct update to the tablet?
Sorry about my bad english....
Best Regards isi
Click to expand...
Click to collapse
Okey for those who did the same **** like me:
First download http://download-c.huawei.com/download/downloadCenter?downloadId=74723&version=273368&siteCode=tw
Than downgrade to this version.
Now you can update to the corect 801-w Android 6.0 version.
Me too install wrong update I have MediaPad M2 801-L, But i downloaded 6.0 the M2-801Wxxx version and got a MediaPad M2 801-W after install update.zip. Updater in the os has no Local setting to select the update.zip. I try downgrade to 5.1.1 M2-801Wxxx version by three buttons, flash stock recovery. But on choose language button "next" not working. Continue try install different stock flash...
Sorry about my bad english....
Just what I needed.
You literally saved my tablet. I had the exact issues (stupidly installed the 801L Marshmallow update on my 801W, which resulted in the non stop rebooting every 5 minutes). Nothing was working and no other roms were being accepted until I came across your post. I made this account just to thank you! The tablet was brand new and was lying boxed and unused for 3 years, so thought I'd use it
Just in the unlikely event anybody else faces this problem, just wanna add one clarification to Isipisi281's original post; to get the first step interim update to happen, make sure you unzip the update file first, then find the update.app file and paste that and it's accompanying folder into the dload folder in your directory, or else the update will fail. The rest is clockwork.
And PS, the M2 runs amazingly after the marshmallow update. Noticeably smoother, snappier and even more frugal with added android features. Highly recommended.
Thanks again!
ajsmsg78 said:
Flash this in stock recovery through dload method:
https://drive.google.com/file/d/0B5I_q70mNuR4N3JLTnNDYzBEYTg/view?usp=sharing
Then you need the stock 801W rom, extract the update.app and flash it through dload. Then it should work and flash back to stock.
Click to expand...
Click to collapse
Hey man - what is the file you shared in this post please?? I need to do the same as is in this thread - revert from 80xL to W version of firmware but the update keeps failing...any idea please??
Sopis said:
Hey man - what is the file you shared in this post please?? I need to do the same as is in this thread - revert from 80xL to W version of firmware but the update keeps failing...any idea please??
Click to expand...
Click to collapse
I don't have the file anymore. Maybe someone in this thread still has it? I'm pretty sure is was the downgrade script to be able to downgrade.
ajsmsg78 said:
I don't have the file anymore. Maybe someone in this thread still has it? I'm pretty sure is was the downgrade script to be able to downgrade.
Click to expand...
Click to collapse
gotcha..it has been a long time ago...well, no matter how I try, I cannot flash anything :/ every FW I downloaded fails...I am lost with this tablet...
Sopis said:
gotcha..it has been a long time ago...well, no matter how I try, I cannot flash anything :/ every FW I downloaded fails...I am lost with this tablet...
Click to expand...
Click to collapse
Yeah, welcome to Huawei world. They don't make it easy to go back to stock on the older devices.
ajsmsg78 said:
Yeah, welcome to Huawei world. They don't make it easy to go back to stock on the older devices.
Click to expand...
Click to collapse
cheers
anyway, do you have any idea how I could do this? as I said, I managed to get back to lollipop, but am still on L version and cannot flash anything over it...any hint is much appreacited...unfortunately, I am not twrp, frp unlocked so fastboot is out of question
Hi there can anybody give me a link to a flashable zip of the stock frimware. I tried to flash the md5 file through odin and it keeps failing. I tried diffrent versions of odin and on Windows 7 and Windows 10 and still no luck
Will appreciate it thanks.
Billabomb75 said:
Hi there can anybody give me a link to a flashable zip of the stock frimware. I tried to flash the md5 file through odin and it keeps failing. I tried diffrent versions of odin and on Windows 7 and Windows 10 and still no luck
Will appreciate it thanks.
Click to expand...
Click to collapse
I don't know where there is a flasheable zip off hand, but you can make your own, there are several tutorials online, search for something like "Convert stock rom to flashable zip"
IronRoo said:
I don't know where there is a flasheable zip off hand, but you can make your own, there are several tutorials online, search for something like "Convert stock rom to flashable zip"
Click to expand...
Click to collapse
I dont have astock rom anymore
Billabomb75 said:
I dont have astock rom anymore
Click to expand...
Click to collapse
You can get stock rom from sammobile.com
https://www.sammobile.com/firmwares/galaxy-s4-mini/GT-I9190/
Billabomb75 said:
.....through odin and it keeps failing.
Click to expand...
Click to collapse
When you say failing, what do you mean? what is the error that you are getting on the phone?
i ask because i am having similar issues. am currently on lineage 7.1.1 and i found a single post out there that mentioned that when i flashed up to 7.1.1 that it triggered a fuse in the flash memory, that cannot be reversed. The error message i get seems to indicate that this is correct. fused2 > binary 1 - meaning that my handset is fused to 2 but the one i am flashing is only a 1.
i have a fully working phone on 7.1.1 but i want to revert to stock and am unable to do so
mrtim123 said:
When you say failing, what do you mean? what is the error that you are getting on the phone?
i ask because i am having similar issues. am currently on lineage 7.1.1 and i found a single post out there that mentioned that when i flashed up to 7.1.1 that it triggered a fuse in the flash memory, that cannot be reversed. The error message i get seems to indicate that this is correct. fused2 > binary 1 - meaning that my handset is fused to 2 but the one i am flashing is only a 1.
i have a fully working phone on 7.1.1 but i want to revert to stock and am unable to do so
Click to expand...
Click to collapse
I get a system write fail on system.ext4... So now i use the carbon 4.4.4 rom
Want to go back to stock
Billabomb75 said:
I get a system write fail on system.ext4... So now i use the carbon 4.4.4 rom
Want to go back to stock
Click to expand...
Click to collapse
ah right. same wants but different issue by the sound of it.
sorry i cant help!
Recently I got my Note 5 and have been enjoying it, unlocked and custom ROM and everything with the latest TWRP. But recently I've wanted to flash a different custom ROM and everytime I do so, I get the error message:
E10001: Failed to update system image.
Updater process ended with Error 7: Error installing zip file xxx (xxx is just the filename)
No matter what ROM I flash, whether it is the Xiaomi.eu ROM or any other custom AOSP/LOS ROM, I get the same message.
I need help as I have no idea what to do at all and am worried that the phone might be messed up permanently.
Download notepad++ and 7zip. Unzip the file, go to meta.inf/com/google/android and open updater script with notepad++. Select and delete the assert lines, and make sure to remove the empty space. Zip the file and flash it.
ensure your phone is note 5 pro, not note 5
BlackHawk580 said:
Recently I got my Note 5 and have been enjoying it, unlocked and custom ROM and everything with the latest TWRP. But recently I've wanted to flash a different custom ROM and everytime I do so, I get the error message:
E10001: Failed to update system image.
Updater process ended with Error 7: Error installing zip file xxx (xxx is just the filename)
No matter what ROM I flash, whether it is the Xiaomi.eu ROM or any other custom AOSP/LOS ROM, I get the same message.
I need help as I have no idea what to do at all and am worried that the phone might be messed up permanently.
Click to expand...
Click to collapse
Could you solve the error?
Same issue here. If you updated to the most recent firmware, then it's impossible to flash anything using the TWRP recoveries available. I get the same E1001 error. I don't think it has anything to do with the model or the ROM. Be careful, because trying to reflash a firmware package will result in a hard brick, and you need to use an ARB authorisation bypass to be able to restore your phone.
For now I have to stay on the latest Global ROM, nothing else I can do.
wrathking said:
Download notepad++ and 7zip. Unzip the file, go to meta.inf/com/google/android and open updater script with notepad++. Select and delete the assert lines, and make sure to remove the empty space. Zip the file and flash it.
Click to expand...
Click to collapse
I tried this with the Xiaomi.eu ROM - no luck, same error. It's not about the ID of the device (TWRP reports that my device is indeed whyred), it's something else.
Mi rom
stephendt0 said:
Same issue here. If you updated to the most recent firmware, then it's impossible to flash anything using the TWRP recoveries available. I get the same E1001 error. I don't think it has anything to do with the model or the ROM. Be careful, because trying to reflash a firmware package will result in a hard brick, and you need to use an ARB authorisation bypass to be able to restore your phone.
For now I have to stay on the latest Global ROM, nothing else I can do.
I tried this with the Xiaomi.eu ROM - no luck, same error. It's not about the ID of the device (TWRP reports that my device is indeed whyred), it's something else.
Click to expand...
Click to collapse
Have you tried using miflash tool?
wrathking said:
Have you tried using miflash tool?
Click to expand...
Click to collapse
Yes. This triggers a hard brick.
Hey I have the same issue on a redmi 5 plus; does anyone found a solution for this? I updated to the last firmware too, and the only rom that works now is evolutionX.
i think i have a solution for this problem, i solved it on my redmi note 3, if anyone is active here, give reply, i will help u........
deepinsys said:
i think i have a solution for this problem, i solved it on my redmi note 3, if anyone is active here, give reply, i will help u........
Click to expand...
Click to collapse
I'm alive
deepinsys said:
i think i have a solution for this problem, i solved it on my redmi note 3, if anyone is active here, give reply, i will help u........
Click to expand...
Click to collapse
Hi, I'm facing the same issue. Can you help me bro? Thank you.
Check whether you are using latest twrp or Orange fox recovery. If not ,then update it. I guess this should solve the problem.
Hi everyone how are you guys,I know my question is not related to the topic but I want someone to help me.i recently bought the red magic 5g Chinese specs,but the problem is that from where I purchased they installed the global Rom inside of it,I want the cn Rom I downloaded the software from the cn nubia official website but when I am about to install it shows me the error,I don't know what to do now,please someone help me
Salim0900 said:
Hi everyone how are you guys,I know my question is not related to the topic but I want someone to help me.i recently bought the red magic 5g Chinese specs,but the problem is that from where I purchased they installed the global Rom inside of it,I want the cn Rom I downloaded the software from the cn nubia official website but when I am about to install it shows me the error,I don't know what to do now,please someone help me
Click to expand...
Click to collapse
Shows you which error?
Did you try to install it via local update?
Anyway, your best bet is to install TWRP and flash the CN ROM through TWRP.
Alternatively, use miflash tool in the unofficial unbrick tool to flash the CN firmware via edl mode
Nubia package error
Bro when I purchased the phone the software was 3.16 global,then I changed it to 4.16 with local update,but I was trying the same thing with the Chinese software when I go to the local update and I press the install button the mobile shut down and goes to the software installation but after 10% or something it shows package error and just reboot it self.i don't know what to do now. sorry my English is not good
Salim0900 said:
Bro when I purchased the phone the software was 3.16 global,then I changed it to 4.16 with local update,but I was trying the same thing with the Chinese software when I go to the local update and I press the install button the mobile shut down and goes to the software installation but after 10% or something it shows package error and just reboot it self.i don't know what to do now. sorry my English is not good
Click to expand...
Click to collapse
Use TWRP; follow the link below, root your device then flash CN ROM from TWRP.
Back up your data cos flashing TWRP will wipe everything.
Also, when installing CN, get version 6.23
All the best
zayidhs said:
Use TWRP; follow the link below, root your device then flash CN ROM from TWRP.
Back up your data cos flashing TWRP will wipe everything.
Also, when installing CN, get version 6.23
All the best
Click to expand...
Click to collapse
Sorry brother but I can't see any link
Salim0900 said:
Sorry brother but I can't see any link
Click to expand...
Click to collapse
http://romdownload.nubia.com/红魔5G/V6.23/NX659J-update.zip
There you are. Its the 6.23 version of the cn rom
This directs to the 5s version but both the 5s and 5g versions of this rom are identical. ( Md5 checksum proves its the same file)
Flash from recovery. Or through TWRP
Brother I downloaded the file but I am trying to flash it through recovery mode,but when I go to the recovery mode and press on package update, otg device but there is no file there.the file location is in the storage device
Salim0900 said:
Brother I downloaded the file but I am trying to flash it through recovery mode,but when I go to the recovery mode and press on package update, otg device but there is no file there.the file location is in the storage device
Click to expand...
Click to collapse
Otg refers to a external usb device you connect to the phone. If you have the update.zip on the root of the internal memory it should show up.
If it does not. You should use the root without unlocking bootloader tutorial to install TWRP. The zip will flash from there with no problems.