Post pictures with proof of fit if you're going to claim no Halo etc.
I was very disappointed that I could never find a good tempered glass screen protector for my LG V30.
Please post about your tempered glass screen protectors for your G7 ThinQ so we can help each other find the best one ( if there is one ) for this phone.
I ordered this one from Amazon.. I'll report back after I try it
[3-PACK]-Mr Shield For LG G7 ThinQ [Tempered Glass] Screen Protector with Lifetime Replacement Warranty https://www.amazon.com/dp/B07C2NK8JR/ref=cm_sw_r_cp_apa_i_AZZdBbZ03Y32T
I just received my lg g7 today and apied the screen protector you posted. it feels fine, but the sides and the bottom have an air gap . I am assuming it may be slightly rounded at the sides which is why it's not sticking down completely. It works for now since I can't really see it too badly. But I do wish to find one that sticks on the phone completely flat
AwesomeFabe said:
I just received my lg g7 today and apied the screen protector you posted. it feels fine, but the sides and the bottom have an air gap . I am assuming it may be slightly rounded at the sides which is why it's not sticking down completely. It works for now since I can't really see it too badly. But I do wish to find one that sticks on the phone completely flat
Click to expand...
Click to collapse
bummer I was hoping it would lay flat. My protector arrives tomorrow and my phone arrives on the 7th
I ordered this one: https://www.amazon.com/ThinQ-Temper...3941&sr=8-1&keywords=lg+g7+invisible+defender
All 3 arrived with smudges and scratches on them already so I will be returning them. I tried one of them anyway and it seems your application has to be really precise because of the curved edges.
I'm only rolling with one kind of protector... I have them on both my phones I use daily now... I don't mind paying the extra cash bc I know the quality will be top notch... No pun intended..
White Dome
Pixel 2 XL
GPEL is the best out of the 5 other brands I've tried for the LG G7
Every other brand that I’ve tried had either adhesive only around the borders that caused touch sensitivity issues and some other clear screen protectors were too small and it did not cover the whole display area.
GPEL’s LG G7 tempered glass is the first glass I've used that actually seats perfectly with full adhesive on the entire screen, had no bubbles, no sensitivity issues and it was super easy to install.
omard619858 said:
Every other brand that I’ve tried had either adhesive only around the borders that caused touch sensitivity issues and some other clear screen protectors were too small and it did not cover the whole display area.
GPEL’s LG G7 tempered glass is the first glass I've used that actually seats perfectly with full adhesive on the entire screen, had no bubbles, no sensitivity issues and it was super easy to install.
Click to expand...
Click to collapse
I'm sure that screen protector has Halo.. it just has a black border to hide it
Someone on Amazon reviewed the ringke invisible defender and said it has no Halo so I ordered that one to try. I will be returning the Mr Shield protector
Anyone try nillkin?
https://nillkin.org/smartphones-acc...7-thinq-accessories/nillkin-lg-g7-thinq-h-pro
Poslano sa mog SM-T555 koristeći Tapatalk
bkdodger said:
I'm only rolling with one kind of protector... I have them on both my phones I use daily now... I don't mind paying the extra cash bc I know the quality will be top notch... No pun intended..
White Dome
Pixel 2 XL
Click to expand...
Click to collapse
How hard is it to install the Dome Glass onto this phone and does the protector cover the entire chin or just the display portion of the phone?
hungryfortech said:
How hard is it to install the Dome Glass onto this phone and does the protector cover the entire chin or just the display portion of the phone?
Click to expand...
Click to collapse
I’ve not installed it yet as I’m waiting on phone ...I expect it to cover the chin with minimal space left to the edges ..it looks complicated when you watch online videos but I’ve installed 3 of them so far with no issues ... take your time it will go on smoothly ...
iPhone X
bkdodger said:
I’ve not installed it yet as I’m waiting on phone ...I expect it to cover the chin with minimal space left to the edges ..it looks complicated when you watch online videos but I’ve installed 3 of them so far with no issues ... take your time it will go on smoothly ...
iPhone X
Click to expand...
Click to collapse
Post pics when you have it installed. I'm waiting on the Spigen Slim Armor to be in stock on Amazon
hungryfortech said:
Post pics when you have it installed. I'm waiting on the Spigen Slim Armor to be in stock on Amazon
Click to expand...
Click to collapse
Yup will do... I went with Ringke Fusion and Air cases to start...
Pixel 2 XL
BrunoSlivar said:
Anyone try nillkin?
https://nillkin.org/smartphones-acc...7-thinq-accessories/nillkin-lg-g7-thinq-h-pro
Poslano sa mog SM-T555 koristeći Tapatalk
Click to expand...
Click to collapse
This will be the one I try it the invisible defender doesn't work
hungryfortech said:
Post pics when you have it installed. I'm waiting on the Spigen Slim Armor to be in stock on Amazon
Click to expand...
Click to collapse
Unfortunately one piece was broken in the kit I received from Amazon it looks to be either how they stored or during delivery... I have to do a return and reorder...
Pixel 2 XL
I bought the Techmatte amFilm version. Mostly based off of the wirecutter review found here: https://thewirecutter.com/reviews/best-iphone-screen-protectors/
Granted that's for iPhone but the tests they did should be the same. I've got it installed and it was super easy, no bubbles, no problems.
tiwey said:
I bought the Techmatte amFilm version. Mostly based off of the wirecutter review found here: https://thewirecutter.com/reviews/best-iphone-screen-protectors/
Granted that's for iPhone but the tests they did should be the same. I've got it installed and it was super easy, no bubbles, no problems.
Click to expand...
Click to collapse
Can you post a picture that shows the edges with no Halo effect ?
bkdodger said:
Unfortunately one piece was broken in the kit I received from Amazon it looks to be either how they stored or during delivery... I have to do a return and reorder...
Pixel 2 XL
Click to expand...
Click to collapse
Oh that sucks, are they doing an exchange? Was hoping to see that bad boy on the G7. Just curious, do you know if Amazon tends to sell all the Spigen cases?
I checked and it looks like Spigen site has the Slim Armor but no Tough Armor, while the Spigen store on Amazon has the Tough Armor but no Slim Armor
hungryfortech said:
Oh that sucks, are they doing an exchange? Was hoping to see that bad boy on the G7. Just curious, do you know if Amazon tends to sell all the Spigen cases?
I checked and it looks like Spigen site has the Slim Armor but no Tough Armor, while the Spigen store on Amazon has the Tough Armor but no Slim Armor
Click to expand...
Click to collapse
I’m doing a return and ordered a new one ... might get it by Saturday so hoping to post up soon ..
Spigen usually order on Amazon bc it’s better prices in most cases I’ve seen ...hopefully they restock soon...
iPhone X
Here is the Mr Shield from the original post..
Garbage.... Halo
I'll be returning it.
My Ringke Invisible Defender screen protector will come later today in the mail. I'll post pictures of that one when it arrives
clninja said:
Here is the Mr Shield from the original post..
Garbage.... Halo
I'll be returning it.
My Ringke Invisible Defender screen protector will come later today in the mail. I'll post pictures of that one when it arrives
Click to expand...
Click to collapse
Is the cause of the halo due to curved screens? I thought the G7 didn't have a curved screen like the V30
Related
I guess I have bad luck. Im looking for screen protectors that actually fit the entire dimensions of our HTC one's. Tried 3 diff brands on Amazon all have clear clarity but none of them fit. They always have gaps between the phone and screen. Im not really a fan of the wet screens guards, i.e (armorshield, zagg, skinomi). Any suggestions..
Here's what ive tried from Amazon so far..
iSmooth http://www.amazon.com/iSmooth-HTC-One-Screen-Protector/dp/B00DE035N2/ref=sr_sp-btf_title_1_12?ie=UTF8&qid=1379350495&sr=8-12&keywords=htc+one+screen+protector
amFilm http://www.amazon.com/Protector-Invisible-Lifetime-Replacement-Warranty/dp/B00CDWTQD0/ref=sr_sp-atf_title_1_1?ie=UTF8&qid=1379350495&sr=8-1&keywords=htc+one+screen+protector
Mpero http://www.amazon.com/MPERO-Pack-Invisible-Screen-Protectors/dp/B00C51IF7C/ref=sr_sp-atf_title_1_3?ie=UTF8&qid=1379350495&sr=8-3&keywords=htc+one+screen+protector
I just want one that takes up the entire screen lol
Looking for one too
noxoug said:
Looking for one too
Click to expand...
Click to collapse
I tried the zagg and peeled it off within a week. The wet ones take away from the screens clarity and beautiful picture big time. Hopefully we find some that do the trick..
kennypow3rs said:
I guess I have bad luck. Im looking for screen protectors that actually fit the entire dimensions of our HTC one's. Tried 3 diff brands on Amazon all have clear clarity but none of them fit. They always have gaps between the phone and screen. Im not really a fan of the wet screens guards, i.e (armorshield, zagg, skinomi). Any suggestions..
Here's what ive tried from Amazon so far..
iSmooth http://www.amazon.com/iSmooth-HTC-One-Screen-Protector/dp/B00DE035N2/ref=sr_sp-btf_title_1_12?ie=UTF8&qid=1379350495&sr=8-12&keywords=htc+one+screen+protector
amFilm http://www.amazon.com/Protector-Invisible-Lifetime-Replacement-Warranty/dp/B00CDWTQD0/ref=sr_sp-atf_title_1_1?ie=UTF8&qid=1379350495&sr=8-1&keywords=htc+one+screen+protector
Mpero http://www.amazon.com/MPERO-Pack-Invisible-Screen-Protectors/dp/B00C51IF7C/ref=sr_sp-atf_title_1_3?ie=UTF8&qid=1379350495&sr=8-3&keywords=htc+one+screen+protector
I just want one that takes up the entire screen lol
Click to expand...
Click to collapse
I quite liked the Rhino Shield I brought which is suppose to protect from drops, (demo here, http://www.youtube.com/watch?v=zNM-1HPZ5uI&feature=c4-overview&list=UUdza-WvC7s2jVzaicYSH4oA)
They are currently doing give aways for their Mark II
https://www.trycelery.com/shop/mark2
kennypow3rs said:
I tried the zagg and peeled it off within a week. The wet ones take away from the screens clarity and beautiful picture big time. Hopefully we find some that do the trick..
Click to expand...
Click to collapse
the wet one worked for a couple of months and now not giving me clarity. i wonder if any good option exists
I bought a cheap pack of 2 at a local accessory store, when I get home I will check the brand, as the fit is almost perfect (there is maybe a 3/4-1 mm gap at the bottom) and it has held up for me pretty well so far.
AaronM7 said:
I bought a cheap pack of 2 at a local accessory store, when I get home I will check the brand, as the fit is almost perfect (there is maybe a 3/4-1 mm gap at the bottom) and it has held up for me pretty well so far.
Click to expand...
Click to collapse
Yes I'd love to know. Thanks
i gotta tell you guys im pretty picky about a screen cover . i just bought the mime tempered glass screen protector and love it !
kennypow3rs said:
Yes I'd love to know. Thanks
Click to expand...
Click to collapse
Of course, now that I'm home, I can't find the packaging. lemme see if they list their brands online, and I'll keep looking for the package.
Have you tried the original HTC ones (SP P910)?
I've bought them on eBay for about 5eur,a pack of two.
They didn't arrive yet, but I've bought from the same user for my Incredible S and they were original and good fit.
http://pages.ebay.com/link/?nav=item.view&id=130868218498&globalID=EBAY-DE
Tech Armor
http://www.amazon.com/gp/product/B00BO2OU90/ref=oh_details_o07_s00_i00?ie=UTF8&psc=1
I bought this Tech Armor 3 pack on Amazon. I messed up the first one like always but the second one went on perfectly. For the first day or two it was rather sticky feeling but after a bit of break in time/use it feels just like the stock glass screen. I've been using it for about a month and there's been no peeling, bubbling, or scratches. It's basically edge to edge coverage. There's maybe a 1 mm gap at the bottom of my phone with the top flush so you could split the difference and have almost no gap all the way around.
For $6 shipped they're a good deal. I don't notice these at all and I'm not a fan of screen protectors in general. Since I haven't found a case I like for The One at all and I wanted protection for putting my phone face down when I'm at work these fit the bill for cheap. I just ordered a DevilCase bumper and back cover and I'll likely continue to use these covers even if I like the bumper combo.
Belkiolle said:
http://www.amazon.com/gp/product/B00BO2OU90/ref=oh_details_o07_s00_i00?ie=UTF8&psc=1
I bought this Tech Armor 3 pack on Amazon. I messed up the first one like always but the second one went on perfectly. For the first day or two it was rather sticky feeling but after a bit of break in time/use it feels just like the stock glass screen. I've been using it for about a month and there's been no peeling, bubbling, or scratches. It's basically edge to edge coverage. There's maybe a 1 mm gap at the bottom of my phone with the top flush so you could split the difference and have almost no gap all the way around.
For $6 shipped they're a good deal. I don't notice these at all and I'm not a fan of screen protectors in general. Since I haven't found a case I like for The One at all and I wanted protection for putting my phone face down when I'm at work these fit the bill for cheap. I just ordered a DevilCase bumper and back cover and I'll likely continue to use these covers even if I like the bumper combo.
Click to expand...
Click to collapse
I have the black HTC one and I ordered the gray diztronic tpu its amazing. Screen protectors work perfect with it. I've tried like 6 cases and I'm set on this one. Its cheap too. Plus it looks awesome on my black phone.
I will check out the tech armors
What's wrong with the glass screen protectors ? Those fit perfectly and do not ruin the feeling (like all plastic protectors do) ?
ro_explorer said:
What's wrong with the glass screen protectors ? Those fit perfectly and do not ruin the feeling (like all plastic protectors do) ?
Click to expand...
Click to collapse
I think I'm going to try the glass ones. I just hope they don't mess with the touch sensitivity etc.
I use a mime ghost on my one and there is no negative effect whatsoever.
// sent from my phone //
Note on the product page for touch sensitivity
"Please note system software 1.29.709.12 or newer is required for use with our HTC One Ghost Glass"
Spigen, Spigen, Spigen. Spigen all the way! The best clarity and perfect fit for my htc one (and all other phones for that matter)
I purchased a Nillkin red hard cover for my One, solely to add grip after a few slips, which come with a Nillkin screen protector that I decided to try. Applied really easy and has an excellent fit and the feel aint too bad. I'm not a fan of screen protectors generally but decided to try this one and it's perfectly fine.
Once you go glass, you never go back
Hi guys so the screen protector hunt starts again ive been looking on amazon uk and some of them seem to be a full adhesive fit does anyone know if the xz2 has flat glass near the main display or is it 2.5D like most models
hear is one ive been looking at https://www.amazon.co.uk/Protector-...6&sr=8-7&keywords=xperia+xz2+screen+protector
On the same hunt, the glass is definitely 2.5D. I wouldn't expect any full adhesive glass protectors to work without massive halo's.
Goronok said:
On the same hunt, the glass is definitely 2.5D. I wouldn't expect any full adhesive glass protectors to work without massive halo's.
Click to expand...
Click to collapse
nightmare isnt it ive had loads of phones lately and everyone has been rubbish id be happy with a good film protector along as its crystal clear but even them seem to have a snowy effect
the Girlfriends iphone 8 plus is the last decent protector ive seen
I’ve ordered
Beyeah??
Will give you an update once I get the phone! Got to wait until 5th April! ?
well just received my xz2 and tired these https://www.amazon.co.uk/Newzerol-D...7&sr=1-8&keywords=xperia+xz2+screen+protector
there okish nice and clear but dont fit too well and at the top and bottom the dont seem to be sticking all too well
anyone had any luck with any more?
thanks
I buy iVoler tempered glass from amazon ita, are warranty life...when will arrive i'll check the description
Edit: iVoler tempered glass for xz2 are very bad, halo in all 4 sides
Zazzinho said:
I buy iVoler tempered glass from amazon ita, are warranty life...when will arrive i'll check the description
Edit: iVoler tempered glass for xz2 are very bad, halo in all 4 sides
Click to expand...
Click to collapse
I bought these
https://www.amazon.co.uk/dp/B07BHLGSBT/ref=cm_sw_r_sms_apa_QVp0Ab7M39G0D
Fitted nice and stuck quite well and no halo till you touch the display then hallo everywhere but they gradually disappear once left alone
God I hate the whole screen protector problems the gf has a iPhone 8 plus bought one went on full adhesive not problems looks crystal clear :crying:
brockyneo said:
I bought these
https://www.amazon.co.uk/dp/B07BHLGSBT/ref=cm_sw_r_sms_apa_QVp0Ab7M39G0D
Fitted nice and stuck quite well and no halo till you touch the display then hallo everywhere but they gradually disappear once left alone
God I hate the whole screen protector problems the gf has a iPhone 8 plus bought one went on full adhesive not problems looks crystal clear :crying:
Click to expand...
Click to collapse
1 hour ago i've seen the brotect airglass, how are this screen protector?
Edit: finally today it's arrived brotect airglass, first time i've buyed and it's arrived a back screen protector for s9+ in xz2 package (???), contact the support and they send me a new for free and it's arrived today...no halo, great brightness and very good oleophobic treatment
i think they all seems to be lying on us... they advertise it as a 3D or full cover edge to edge but when you get your hands on it you realize it only protects the LCD, like flat protector...
well, i like this by IMAK... it's a 3D and full edge to edge film rather than tempered glass... what i don't like about it is not glossy, but rather anti-glare which i hate.
check the link below if anyone is interested in buying it
https://www.ebay.com/itm/For-Sony-X...var=552691546263&_trksid=p2055119.m1438.l2649
I bought this one, fits edge to edge very well.
https://www.amazon.co.uk/dp/B07B3XGHDV/ref=cm_sw_r_em_apa_i_ZWe8AbT6KPEVK
brockyneo said:
Hi guys so the screen protector hunt starts again ive been looking on amazon uk and some of them seem to be a full adhesive fit does anyone know if the xz2 has flat glass near the main display or is it 2.5D like most models
hear is one ive been looking at https://www.amazon.co.uk/Protector-...6&sr=8-7&keywords=xperia+xz2+screen+protector
Click to expand...
Click to collapse
this should look amazing, also it does protects the sides....
take a look
https://www.ebay.com/itm/Xperia-XZ2...-Full-Coverage-3Pack-Clear-Flim-/302707711634
here is the perfect case that match it
https://www.ebay.com/itm/Sony-Xperi...&itm=601568981187&_trksid=p5411.c100167.m2940
Does plastic screen protector protects your phone from falls and prevents shattering like the glass ones?
I bought this one but was rubbish bad rainbow affect and started coming off withing a week https://www.amazon.co.uk/dp/B07BHLGSBT/ref=cm_sw_r_sms_apa_i_5VY8Ab1MD67AR
But bought this one https://www.amazon.co.uk/dp/B07BPRBRPT?ref=yo_pop_ma_swf
Works perfect crystal clear and stuck well at the edges been 2 weeks and still looks new and case friendly
AlvinZahran98 said:
Does plastic screen protectors protect your phone from fall and prevents shattering like the glass ones?
Click to expand...
Click to collapse
It prevents glass breaking by 30%.
Or was it 70%?
But it definitely strengths the glass structure.
MartinX3 said:
It prevents glass breaking by 30%.
Or was it 70%?
But it definitely strengths the glass structure.
Click to expand...
Click to collapse
So it is safe to use, as safe as when I use a glass screen protector?
AlvinZahran98 said:
So it is safe to use, as safe as when I use a glass screen protector?
Click to expand...
Click to collapse
I prefer a thick glass screen protector.
It will easily avoid bubbles and is way stronger.
MartinX3 said:
I prefer a thick glass screen protector.
It will easily avoid bubbles and is way stronger.
Click to expand...
Click to collapse
Okay, I always use a glass screen protector too. But, it is a nightmare to find a good glass screen protectors for this phone.
AlvinZahran98 said:
Okay, I always use a glass screen protector too. But, it is a nightmare to find a good glass screen protectors for this phone.
Click to expand...
Click to collapse
I use this one.
I hope you like it.
https://www.wigento.de/smartphone/s...sony-xperia-xz2-schutz-huelle-neu/a-42519990/
I recommend this:
https://www.gadgetshieldz.com/sony-xperia-xz2-screen-protectors-cases-covers-skins.html
Fits perfectly and the smoothness is like glass!
Dont buy this particular type of glass on aliexpress (this is my first bad buy here, others that i ordered for diferent models were worth it) it seems to be problem with this one... i have bad connection in middle of screen 3 cm vertikal (no air bubble, just pad materials on protective glass
https://www.dropbox.com/s/yxu55ssg7vig4xi/Screenshot_20180618-075151.png?dl=0
Ordered this spigen case from Amazon UK , look similar that come in box but not same quality and raised lips/frame than one in box
https://www.amazon.co.uk/dp/B078YH85LW/ref=cm_sw_r_cp_apa_2ceYAbN05XN5G
onlinejobwork said:
Ordered this spigen case from Amazon UK , look similar that come in box but not same quality and raised lips/frame than one in box
Click to expand...
Click to collapse
I have also bought one of these and it's an excellent product (as I 've found with all Spigen cases). I have not bought a different brand than Spigen in the last 4 years. Highly recommended
onlinejobwork said:
Ordered this spigen case from Amazon UK , look similar that come in box but not same quality and raised lips/frame than one in box
https://www.amazon.co.uk/dp/B078YH85LW/ref=cm_sw_r_cp_apa_2ceYAbN05XN5G
Click to expand...
Click to collapse
you didn't get the TPU case in box with P20? I have bought P20 in UK and there was a case inside the box and screen protector already on screen.
g_oral said:
you didn't get the TPU case in box with P20? I have bought P20 in UK and there was a case inside the box and screen protector already on screen.
Click to expand...
Click to collapse
Yeah, it was the same here in Germany when I got my P20 from my carrier. But the stock screen protector sucks hard because its attracts fingerprints way more than the plain screen itself or the 3rd party glass screen protector I'm currently using.
BillyIdle said:
Yeah, it was the same here in Germany when I got my P20 from my carrier. But the stock screen protector sucks hard because its attracts fingerprints way more than the plain screen itself or the 3rd party glass screen protector I'm currently using.
Click to expand...
Click to collapse
That's true. I have ordered Nilkin amazing h+ pro glass. Now i'm waiting for it. This glass is scratch resistant i had it before on my nexus 6p
I just switched to this spigen case two days ago:
https://www.spigen.com/products/huawei-p20-case-rugged-armor
Makes the device bigger than the stock protector but adds more cushioning around the edges and also a little protection for the front. I've had spigen cases for my last 4 smartphones and I'm quite satisfied with the quality. Design and protection are both very good (at least with the cases I've been using). Never had any damage to the phone.
(I've been using at least two dozen smartphones in the last 10 years and never had a spider app installed by accident on any phone...)
g_oral said:
That's true. I have ordered Nilkin amazing h+ pro glass. Now i'm waiting for it. This glass is scratch resistant i had it before on my nexus 6p
Click to expand...
Click to collapse
Have you got it yet? Would be good to know your thoughts on the screen protector after p20 installation.
jimmyboggust said:
Have you got it yet? Would be good to know your thoughts on the screen protector after p20 installation.
Click to expand...
Click to collapse
Not yet. I will write in this topic when i get it.
So what's everyone planning on getting or using?
I'm not a fan of tempered glass, so I still tend to rock the film ones.
Have been using the Ringke Dual Easy Film on my S10e, and they're perfect, however they're not yet available for the Pixel 5 (They are coming though!)
Grabbed myself some of the Atfolix ones https://www.amazon.co.uk/gp/product/B08KLV9P1W/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1, again, used these in the past on the Pixel 2 (I think it was) similar to the Ringke, just a different type of installation method.
Is it wet install film protector?
Had wet on my last phone and nothing beats it
y2grae said:
Is it wet install film protector?
Had wet on my last phone and nothing beats it
Click to expand...
Click to collapse
No it's not the wet installs
I'm in the same boat. I've never had a tempered glass screen protector that I liked. I picked up this since it was the only non-glass one I could find. Hopefully it doesn't suck.
Gibsonflyingv said:
I'm in the same boat. I've never had a tempered glass screen protector that I liked. I picked up this since it was the only non-glass one I could find. Hopefully it doesn't suck.
Click to expand...
Click to collapse
Let me know what they're like!
Ringke dual easy film are out on Amazon, however, it's the wings version, which wraps around the side of the phone. :/
I've just ordered a 'Brotect' screen protector having previously had a positive experience on Nokia 8, will report back.
Man i can't seem to find any good screen protectors on amazon, all those already there are either not available before November (though it already has comments...) Or doesn't fit... Didn't check on other websites though (Fr here).
I too ordered a brotect airglass screen protector, 3 pack for £8.19.
Previously I had purchased one off amazon that I returned as the punch hole cutout would not align - most of the ones on amazon have the same issue of alignment based on the odd reviews coming in. I hope brotect will be good as it's made in Germany.
Screen Protector
I just fitted my Supcase Unicorn Beetle case w/ built in screen protector - it is amazing, makes my P5 feel much better in my giant hands.
if I didnt get this i'd wait for the spigen Glas-T, they fit like a glove and work well on their own or with their cases (liquid air is on order as a backup)
kinny314 said:
I just fitted my Supcase Unicorn Beetle case w/ built in screen protector - it is amazing, makes my P5 feel much better in my giant hands.
if I didnt get this i'd wait for the spigen Glas-T, they fit like a glove and work well on their own or with their cases (liquid air is on order as a backup)
Click to expand...
Click to collapse
Can you post a pic?
Pics
y2grae said:
Can you post a pic?
Click to expand...
Click to collapse
https://ibb.co/M5vDrRz
https://ibb.co/cbXRDGF
https://ibb.co/1LNVN0w
https://ibb.co/qy8Dqx8
Looks a little bulky
How is the screen protector?
Laughing at the speaker holes when it's under the screen
a naked Pixel is just too dainty for my hands, protector is nice and responsive.
I can recommend the Brotect air glass screen protector. Precise width (which has led to me having half a mm uncovered on the right as it's the same amount over on the left...) but very easy application and looks great. Fits fine with a Spigen case.
TonySpoons said:
I can recommend the Brotect air glass screen protector. Precise width (which has led to me having half a mm uncovered on the right as it's the same amount over on the left...) but very easy application and looks great. Fits fine with a Spigen case.
Click to expand...
Click to collapse
Are you talking about this one?
https://www.amazon.co.uk/brotect-Protector-compatible-Resistant-AirGlass-Clear/dp/B08KS88SDT/ref=sr_1_9?dchild=1&keywords=brotect+pixel+5&qid=1603365855&sr=8-9
Does it come with a cutout for the camera as shown in the picture on amazon?
bilalmwirk said:
Are you talking about this one?
https://www.amazon.co.uk/brotect-Protector-compatible-Resistant-AirGlass-Clear/dp/B08KS88SDT/ref=sr_1_9?dchild=1&keywords=brotect+pixel+5&qid=1603365855&sr=8-9
Does it come with a cutout for the camera as shown in the picture on amazon?
Click to expand...
Click to collapse
I ordered mine from here but it looks like the same one. Yes it has that style of cutout.
Avoid the AtFolix range. I've used them before and theyre usually fine, these are another level of poor!
https://imgur.com/a/KyGb30W
Ordered a pack of the Media Devil Protectors - Hopefully these will be better!
I have applied the brotect screen protector. If you apply it properly (my second attempt) then you can cover the entire screen. First time using it but on appearance it does not seem like glass at all, looks more plastic so cannot comment on the durability. But it is very thin and looks great.
Only the top left camera portion is unprotected as there is no punch hole but rather a corner cut out in the protector
I have the LK tempered glass. It is not bad at all. A bit small for my liking. It covers all of the screen though. Has a cut out and sticks well. Tempered glass is going to
be interesting for this phone as I think they will all look very narrow and short. While the screen is flat the gloss border curves away and you have to choose where protection ends. My personal preference might be for film this time but will see. This is fine for now. I had a Zagg protector ordered from them but it got cancelled. Frustrating.
Puzzling why the Supcase has 2 extra holes on the top of the protector in the middle... very weird.
Can anyone recommend a tempered glass or other quality screen protector for the outer cover display? Something that you've personally used and can vouch for.
Thanks in advance!
Same. Front protector scratched on me 1st day. Also peeled up when I was opening. Need to replace.
JayRolla said:
Same. Front protector scratched on me 1st day. Also peeled up when I was opening. Need to replace.
Click to expand...
Click to collapse
Yep. Mine was basically destroyed on day 1 with normal use.
Whitestone has a ez screen protector and also a liquid adhered protector. I have installed ez one without trouble since a few days before official release and it's still holding strong. You also get 2 for like $10 so you can't really beat it
Sonin66 said:
Whitestone has a ez screen protector and also a liquid adhered protector. I have installed ez one without trouble since a few days before official release and it's still holding strong. You also get 2 for like $10 so you can't really beat it
Click to expand...
Click to collapse
Looks like it might have trouble fitting properly if used with a case. The black border looks problematic. Have you used it with a case and, if so, do you have any pics or comments on that? Thanks.
I'm trying to figure out the best front screen protector as well. I would prefer tempered glass but have only seen a couple and not in stock at the moment. Still have the stock one on it but it's starting to bubble and peel/Crack on the sides.
I'm using these white stone dome front tempered glass screen protector. I got two of them for $10. They work decent with a case. But make sure it is a minimalistic case like the Samsung carbon fiber.
pieces of cake said:
Looks like it might have trouble fitting properly if used with a case. The black border looks problematic. Have you used it with a case and, if so, do you have any pics or comments on that? Thanks.
Click to expand...
Click to collapse
I am currently using samsungs silicone case and there is no problems with it coming off. Have not tried with a heavy duty case but I honestly don't see it as a problem
I got my leather case (samsung one) today and love it. However as soon as i applied it the cover screen plastic protector came off in the edge so i just removed it.
since it seems pretty thick on the inside - is there any 9h glass available yet which fits with the case? Or can i go to a samsung store and they reapply the plastic one on the cover screen?
i dont mind paying
I'm using the Whitestone glass screen protector. NOT the EZ. I've used it on all my phones since it was first released, including I Note devices and the Z Fold 2.
I use this for Extra protection
Whitestone Dome Glass UV.
skinnytoo2 said:
I'm using these white stone dome front tempered glass screen protector. I got two of them for $10. They work decent with a case. But make sure it is a minimalistic case like the Samsung carbon fiber.
Click to expand...
Click to collapse
I'm waiting on these to get delivered to me today actually. The stock one on my front screen is starting bubble and peel up on the side. My case kinda covers it up but the stock one is also picking up quite a few scratches. Hopefully these will do the job. Isn't that easy to fine a good tempered glass screen protector for this device. Spigen looks to be coming out with one but not available yet.
pside15 said:
I'm waiting on these to get delivered to me today actually. The stock one on my front screen is starting bubble and peel up on the side. My case kinda covers it up but the stock one is also picking up quite a few scratches. Hopefully these will do the job. Isn't that easy to fine a good tempered glass screen protector for this device. Spigen looks to be coming out with one but not available yet.
Click to expand...
Click to collapse
I had Spigen EZ for front screen and it is crap. Peeled off next day and applied Whitestone Dome.
Damian said:
I had Spigen EZ for front screen and it is crap. Peeled off next day and applied Whitestone Dome.
Click to expand...
Click to collapse
Hmm, not sure what that one is. I haven't seen a front screen protector from Spigen anywhere. The one I was referring to is the one below, which is the only one on their site and doesn't appear to be out yet since it says coming soon.
Galaxy Z Fold 3 Screen Protector GLAS.tR Full Cover Glass + Hinge Film
Shield your Galaxy Z Fold 3 with our premium tempered glass full cover Screen Protector. The Full Cover Glass screen protector is the ultimate solution for screen defense to ensure a flawless fit with seamless case compatibility.
www.spigen.com
pside15 said:
Hmm, not sure what that one is. I haven't seen a front screen protector from Spigen anywhere. The one I was referring to is the one below, which is the only one on their site and doesn't appear to be out yet since it says coming soon.
Galaxy Z Fold 3 Screen Protector GLAS.tR Full Cover Glass + Hinge Film
Shield your Galaxy Z Fold 3 with our premium tempered glass full cover Screen Protector. The Full Cover Glass screen protector is the ultimate solution for screen defense to ensure a flawless fit with seamless case compatibility.
www.spigen.com
Click to expand...
Click to collapse
Yeah, exactly this one. My mistake I wrote EZ.
In UK is available from Amazon.
Anyone got a recommendation for a good case? Id normally use Spigen but some of their case prices are ambitious to say the least.
Razuddin said:
Anyone got a recommendation for a good case? Id normally use Spigen but some of their case prices are ambitious to say the least.
Click to expand...
Click to collapse
I'm using the Ringke Slim and I really like it. I ordered the Spigen S Pen case, but it won't ship for another week or so. Looks bigger than I'd like, but definitely need something I can switch to when I really need to carry the S Pen and don't want to have it loose in a pocket.
I also ordered the official Samsung Aramid case (which also won't arrive for another week or two). Based on the reports I've read and the pics I've seen, the Aramid appears to be the slimmest case available for the ZF3. I hate bulky cases, especially on a device that's as large as the ZF3, so I'm guessing I'll probably settle on the Aramid for 90% of my daily use.
pieces of cake said:
I'm using the Ringke Slim and I really like it. I ordered the Spigen S Pen case, but it won't ship for another week or so. Looks bigger than I'd like, but definitely need something I can switch to when I really need to carry the S Pen and don't want to have it loose in a pocket.
I also ordered the official Samsung Aramid case (which also won't arrive for another week or two). Based on the reports I've read and the pics I've seen, the Aramid appears to be the slimmest case available for the ZF3. I hate bulky cases, especially on a device that's as large as the ZF3, so I'm guessing I'll probably settle on the Aramid for 90% of my daily use.
Click to expand...
Click to collapse
Thanks buddy, how are you finding the ringke slim? I was keen on that until i read a few amazon reviews mentioning the case had scratched their devices? Have you had any such issue? Would be good to hear if you used the sticky pads and if they are easy/hard to remove.
Razuddin said:
Thanks buddy, how are you finding the ringke slim? I was keen on that until i read a few amazon reviews mentioning the case had scratched their devices? Have you had any such issue? Would be good to hear if you used the sticky pads and if they are easy/hard to remove.
Click to expand...
Click to collapse
Great case. No scratches. Not sure how anyone scratched their Fold with this case. You'd have to be pretty damn careless to do that. I used the adhesive strips.