Related
Hey folks, I just got a Touch Pro 2 for Tmobile and had it unlocked so I am using it on ATT. I cant figure out how to get mms (picts sent to me) or the settings for the internet.
also is there any disadvantage to using a unlocked tmobile phone as opposed to a att tilt 2 ?
thanks for you help in advance
Randy
You need to get ATT's settings for internet and media (mms) It probably still has the tmobile settings in it.
thanks for the reply. does anyone know how to set up the mms for ATT ?
help!
I need to do this too but as I see it the T-Mobile settings are locked in and cant be edited or added to.
I'm using a TMO TP2 on ATT also...
VRandyJ said:
also is there any disadvantage to using a unlocked tmobile phone as opposed to a att tilt 2 ?
Randy
Click to expand...
Click to collapse
To answer this question the only one I've found so far is the lack of 3G, you cant get it over AT&T's network b/c of the difference in hardware.
thanks. anyone else have info on the settings?
found my answer thanks to a constant searching. I found this file which I believe was made by someone on this forum. http://www.4shared.com/file/36880113/e15673cc/shogun_cing.html?s=1 Its a cab file, I did a hard reset of my device installed it and it hooks up the internet and mms settings on its own. Thanks you who ever made this file.
Bingo! Worked for me too...
Good evening all. A friend gave me an HTC Incredible recently. My current carrier is AT&T however I find myself nearly completely fed up with CrApple. I would like to try out the HTC. I need instruction on how to recover, kernal, modem, or even flash an AT&T modem to it. Do you happen to know of an easy source that details the explanation(s) that I am looking for? Thank you, in advance, for your help tonight. -Sarah
Verizon phones can not work on AT&T's network. They send and receive data in different ways (Verizon = CDMA, AT&T = GSM). Not sure if you said you're staying with AT&T or not, but just putting that out there.
POQbum said:
Verizon phones can not work on AT&T's network. They send and receive data in different ways (Verizon = CDMA, AT&T = GSM). Not sure if you said you're staying with AT&T or not, but just putting that out there.
Click to expand...
Click to collapse
Thank you for your reply. I am considering switching networks. I'm just trying to bypass the initial request to enter my phone number, as I don't have a Verizon plan as of yet, so that I may test out the phone that I was given (the HTC Incredible). The goal is to be able to connect the device to my WiFi and use the Incredible to do everything it is capable of except for phone calls and MMS's... I am very eager to see how much can be done with this new toy. Any advice?
SeattlePoise said:
Thank you for your reply. I am considering switching networks. I'm just trying to bypass the initial request to enter my phone number, as I don't have a Verizon plan as of yet, so that I may test out the phone that I was given (the HTC Incredible). The goal is to be able to connect the device to my WiFi and use the Incredible to do everything it is capable of except for phone calls and MMS's... I am very eager to see how much can be done with this new toy. Any advice?
Click to expand...
Click to collapse
All you have to do is turn on your WiFi at home hit the menu button at the bottom of the incredible tap settings, go to wireless and networks, turn on WiFi, tap WiFi settings and it should of scanned and found your WiFi signal tap on it hit connect and there you go
Sent from my Incredible using XDA App
As soon as I am able to get into the phone I will do that, thank you. Right now the Incredible, since the power completely drained then charged and I tried to use the phone, I am first asked to enter my phone number. The phone won't allow me to access the menu or anything else until I enter a phone number. What I need to know is how to bypass that request for my phone number. Do you know how this is done?
I have been searching and cant seem to find anything... :/
I am trying to SIM Unlock my LG G Pad 8.3 Model VK810 that is Verizon and should come factory unlock I believe. I need this to be used on AT&T LTE which I have a sim card for and a tablet plan on the shared data plan.
It is on 4.2.2 baseband is m9615a-cefwtazm
I tried adding some ATT APN settings I found, but that did not help me. I think I need to Change it to GSM From CDMA somehow? I am not really sure. I can update and root if needed or whatever I need to do. I also have a samsung z3x box, but dont think it will work on the LG.
Any help would really help me out! Thank you in advance.
jaredlappa said:
I have been searching and cant seem to find anything... :/
I am trying to SIM Unlock my LG G Pad 8.3 Model VK810 that is Verizon and should come factory unlock I believe. I need this to be used on AT&T LTE which I have a sim card for and a tablet plan on the shared data plan.
It is on 4.2.2 baseband is m9615a-cefwtazm
I tried adding some ATT APN settings I found, but that did not help me. I think I need to Change it to GSM From CDMA somehow? I am not really sure. I can update and root if needed or whatever I need to do. I also have a samsung z3x box, but dont think it will work on the LG.
Any help would really help me out! Thank you in advance.
Click to expand...
Click to collapse
As it seems you are comfortable messing with your APN settings that should be all you will need to do. The device is locked to specific wireless frequencies but luckily for you at &t uses the same LTE frequencies. You will need to have root access in order to write your APN settings though, check the forums for information on that. Finally make sure that the sim you have is compatible with your tablet data plan, and your APN settings should be as follows for mobile data only.
APN: BROADBAND
MCC: 310
MNC: 410
uprightbass360 said:
As it seems you are comfortable messing with your APN settings that should be all you will need to do. The device is locked to specific wireless frequencies but luckily for you at &t uses the same LTE frequencies. You will need to have root access in order to write your APN settings though, check the forums for information on that. Finally make sure that the sim you have is compatible with your tablet data plan, and your APN settings should be as follows for mobile data only.
APN: BROADBAND
MCC: 310
MNC: 410
Click to expand...
Click to collapse
Happen to have a link for a Root tutorial and ROM that is good and stable for my Vk810? Will the V500 work with my pad?
I was looking at this one: http://forum.xda-developers.com/showthread.php?t=2660676
Thank you.
jaredlappa said:
Happen to have a link for a Root tutorial and ROM that is good and stable for my Vk810? Will the V500 work with my pad?
I was looking at this one: http://forum.xda-developers.com/showthread.php?t=2660676
Thank you.
Click to expand...
Click to collapse
I do not, I am sure you will find something if you look around. The V500 and V510 methods are not compatible. There is a method for yours though along with a custom recovery in the works. You may even have a custom rom in the near future.
P.S. this topic belongs in Q/A and not development.
uprightbass360 said:
I do not, I am sure you will find something if you look around. The V500 and V510 methods are not compatible. There is a method for yours though along with a custom recovery in the works. You may even have a custom rom in the near future.
P.S. this topic belongs in Q/A and not development.
Click to expand...
Click to collapse
Why would it belong in Q/A? If I am having to root and unlock it or do custom recovery? Isn't that with development?
Sorry if I have posted in the wrong place.
Here is the link I found for Rooting: http://forum.xda-developers.com/showthread.php?t=2703825
From researching it looks like it will work with the VK810.
This was also newly released: http://forum.xda-developers.com/showthread.php?t=2726707
But there are no custom roms that I have found yet.
So, I should Root this and then change the APN settings to what you told me and my ATT SIM would work?
Thank you!
jaredlappa said:
Why would it belong in Q/A? If I am having to root and unlock it or do custom recovery? Isn't that with development?
Sorry if I have posted in the wrong place.
Here is the link I found for Rooting: http://forum.xda-developers.com/showthread.php?t=2703825
From researching it looks like it will work with the VK810.
This was also newly released: http://forum.xda-developers.com/showthread.php?t=2726707
But there are no custom roms that I have found yet.
So, I should Root this and then change the APN settings to what you told me and my ATT SIM would work?
Thank you!
Click to expand...
Click to collapse
I haven't read much about i0root but it looks like it will work. Now the next part is not certain weather or not it will work, but I have seen tablets able to run on other networks that are unlocked. As long as Verizon did not implement any extra protection you should be able to use an at&t sim that is enabled for tablet data.
Once you are rooted go pick up es file explorer and navigate to /system/etc/apns-conf.xml . Make sure that before you change anything that you make a copy and name it something else so you can find it again if you have to go back. Open the file using the text editor. You can get rid of the other apns and just put your new one in there and give it a reboot. It should kick right on after you reboot. Good luck!
uprightbass360 said:
I haven't read much about i0root but it looks like it will work. Now the next part is not certain weather or not it will work, but I have seen tablets able to run on other networks that are unlocked. As long as Verizon did not implement any extra protection you should be able to use an at&t sim that is enabled for tablet data.
Once you are rooted go pick up es file explorer and navigate to /system/etc/apns-conf.xml . Make sure that before you change anything that you make a copy and name it something else so you can find it again if you have to go back. Open the file using the text editor. You can get rid of the other apns and just put your new one in there and give it a reboot. It should kick right on after you reboot. Good luck!
Click to expand...
Click to collapse
I have an LG G PAD 8.3 VK810 Verizon that I am trying to root in order to SIM unlock from Verizon to ATT.
I have installed the Drivers packages here and it finds the drivers in USB Modes: Charge tablet and media sync fine, but when I go to Internet Connection mode and choose ethernet it can not find the following drivers: CDC ECM, CDC SERIAL, AND 3 THAT SAY LGE ANDROID PHONE.
Any ideas on how to get these drivers installed to try the next step? I tried to go ahead and run the iroot program but it can not find the device.
Thank you for the help.
I have installed a T-Mobile SIM card in my LG GPad 8.3 LTE so I could get the free gig of data they offer existing customers. It worked without rooting. All I did was add a new APN with the proper T-Mobile settings and I was able to surf. Did it right there at the T-Mobile store with the rep to verify it would work before I added the data line to my account.
Sent from my HTC6525LVW using XDA Premium 4 mobile app
That's awesome. I love what tmobile is doing to the phone industry. I love their aggressive stance now on grabbing customers.
Sent from my Nexus 5
jlczl said:
I have installed a T-Mobile SIM card in my LG GPad 8.3 LTE so I could get the free gig of data they offer existing customers. It worked without rooting. All I did was add a new APN with the proper T-Mobile settings and I was able to surf. Did it right there at the T-Mobile store with the rep to verify it would work before I added the data line to my account.
Sent from my HTC6525LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thx for the tip. The tablet is set to LTE mode and since T-Mobile LTE has the same band with Verizon LTE. It definitely works on T-Mobile.
For AT&T, no luck even if rooted. I used Radio Switcher app to go to the Tablet Info in Testing Mode. But it displays error message "This application does not work on this device".
ttn1185 said:
Thx for the tip. The tablet is set to LTE mode and since T-Mobile LTE has the same band with Verizon LTE. It definitely works on T-Mobile.
For AT&T, no luck even if rooted. I used Radio Switcher app to go to the Tablet Info in Testing Mode. But it displays error message "This application does not work on this device".
Click to expand...
Click to collapse
I rooted and popped in an AT&T sim card and it let's me put in the APN fine.
Sent from my HTC One_M8 using XDA Free mobile app
Skizzy034 said:
I rooted and popped in an AT&T sim card and it let's me put in the APN fine.
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
But that is not my problem. The tablet doesn't pick up AT&T signal
ttn1185 said:
But that is not my problem. The tablet doesn't pick up AT&T signal
Click to expand...
Click to collapse
Easy...
Vk810 supports lte bands 4(aws) and 13 (700mhz block c), bands that Verizon uses
T-Mobile uses band 4 for lte mainly, will use band 2 (1900) and 12 (700 MHz block a) in the future as well. Vk810 will work on T-Mobile wherever tmobile has LTE right now (with band 4)
Att uses band 4, 2 (1900), 17(700mhz block b) and 30(2300mhz). Vk810 will only work on att if at uses band 4. If att only used band 2 in your area, your att phone (which supports band 2) will show LTE, but vk810 won't work
I don't know if there is a map showing which bands att uses in your area. There is a spectrum map showing who owns which band in which region, but no guarantee that att has active cell sites
http://specmap.sequence-omega.net
Tmobile sim on verizon g pad
jlczl said:
I have installed a T-Mobile SIM card in my LG GPad 8.3 LTE so I could get the free gig of data they offer existing customers. It worked without rooting. All I did was add a new APN with the proper T-Mobile settings and I was able to surf. Did it right there at the T-Mobile store with the rep to verify it would work before I added the data line to my account.
Sent from my HTC6525LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
How were you able to set up up the G Pad with the tmobile sim ? I went to the tmobile store and they were not able to get service running. What settings did you use ? Any help would be appreciated.
jlanderos93 said:
How were you able to set up up the G Pad with the tmobile sim ? I went to the tmobile store and they were not able to get service running. What settings did you use ? Any help would be appreciated.
Click to expand...
Click to collapse
you need to insert sim, reboot device (it'll prompt you to)
then you need to add the t-mobile APNs to the device
the settings below should work
http://forum.xda-developers.com/showthread.php?t=2240233
paperWastage said:
you need to insert sim, reboot device (it'll prompt you to)
then you need to add the t-mobile APNs to the device
the settings below should work
http://forum.xda-developers.com/showthread.php?t=2240233
Click to expand...
Click to collapse
I see people here say this tablet is unlocked. I rooted & inserted an at&t sim, but not working. It shows a greyed out singnal bar and a circle next to it. Then I edited build.prop ro.build.target_operator=VZN to OPEN. Now the circle is gone leaving a greyed out signal bar with small red x above it. I'm on 4.2.2. Can someone elaborate?
mrgj said:
I see people here say this tablet is unlocked. I rooted & inserted an at&t sim, but not working. It shows a greyed out singnal bar and a circle next to it. Then I edited build.prop ro.build.target_operator=VZN to OPEN. Now the circle is gone leaving a greyed out signal bar with small red x above it. I'm on 4.2.2. Can someone elaborate?
Click to expand...
Click to collapse
what region/location are you in?
believe that circle = battery indicator, not network indicator.... full circle = 100% battery, otherwise not 100% battery
mrgj said:
I see people here say this tablet is unlocked. I rooted & inserted an at&t sim, but not working. It shows a greyed out singnal bar and a circle next to it. Then I edited build.prop ro.build.target_operator=VZN to OPEN. Now the circle is gone leaving a greyed out signal bar with small red x above it. I'm on 4.2.2. Can someone elaborate?
Click to expand...
Click to collapse
I'm not sure if this works on at&t. Mine is working on T-Mobile. All I did was insert the T-Mobile SIM and APN settings for it to work.
Sent from my HTC6525LVW using XDA Premium 4 mobile app
jlczl said:
I'm not sure if this works on at&t. Mine is working on T-Mobile. All I did was insert the T-Mobile SIM and APN settings for it to work.
Sent from my HTC6525LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
as I said before...
this device is unlocked... it accepts any SIMs, and works w/ any band 4/13 network
AT&T's network accept any device that's approved for GSM/LTE spec, and compatible with their band 2/4/17/30 network.
AT&T doesn't have band 4 everywhere.. for example, no band 4 in nyc region.... this device won't work on at&t in nyc
paperWastage said:
as I said before...
this device is unlocked... it accepts any SIMs, and works w/ any band 4/13 network
AT&T's network accept any device that's approved for GSM/LTE spec, and compatible with their band 2/4/17/30 network.
AT&T doesn't have band 4 everywhere.. for example, no band 4 in nyc region.... this device won't work on at&t in nyc
Click to expand...
Click to collapse
LOL, I know it's unlocked. I'm using it on T-Mobile without a problem. And yes, I read your previous post. I was just answering what I personally know firsthand.
Sent from my HTC6525LVW using XDA Premium 4 mobile app
hello every one.
My lte doesn't work. I already test with the rom paranoid and CM.
I m from morocco our 4g is new and i think is the same as the europe 4g (lte).
Do you have any idea ?
Pls help
Thank you for your time
up
Help pls i need to flash modem ?
Which carrier are you using in Europe? Are you roaming from T-Mobile or have you purchased a different service/SIM card in Europe?
Also, what country are you in specifically?
There was a guide somewhere on XDA regarding Qualcomm processors and band unlocking using QXDM (LTE) and QPST (GSM/WCDMA) though I forget the exact name. I believe there was also concern that it could damage antennas. Also I have no idea if it actually works and mucking around in the NV RAM space is very risky. I would not advise it.
Is at least the GSM service working? If so, is it really that bad that you need LTE? Personally I would leave it at "oh the gsm works, I'm good". :good:
Depends on the carrier you are using, is your phone unlocked? I would assume that it is since your can receive gsm signal.... Anyways, what you would want to do is check your network's APN and check our phones APN settings and add the 4g/LTE APN settings to your phone manually... Then restart your phone and try again, make sure you select the apn after adding it so you know it's active. Try that. If that doesnt work, then go into your APN settings again and just do (reset apn setings) or something along the lines of that which resets/restores your apn settings back to normal/default.... either one could work, try the first one first ofc! G:L:
So I jumped on the AT&T/DirecTV Unlimited data deal and ported my phone today. It all looked normal and I got the activation texts and such - it even populated the nxtgenphone APN info (though it was deselected and I had to select it). Anyway, I've had no data at all. As a test, I switched the APN to phone and data works, but the speeds appear to be much lower than what my wife's iPhone is seeing on the nxtgenphone APN. Anyone got any tips?
I'm running Viper 2.5, latest US unlocked firmware and US unlocked selected as carrier, and it works fine on AT&T other than this......only other thing I can mention is when I select preferred band or whatever it shows WCDMA/GSM and if I change it to WCDMA/GSM/LTE it reverts back for some reason. Any help much appreciated. I've called AT&T and they're like, uh, we don't sell the HTC 10 so can't really help you... grrrrrr.....
vettejock99 said:
So I jumped on the AT&T/DirecTV Unlimited data deal and ported my phone today. It all looked normal and I got the activation texts and such - it even populated the nxtgenphone APN info (though it was deselected and I had to select it). Anyway, I've had no data at all. As a test, I switched the APN to phone and data works, but the speeds appear to be much lower than what my wife's iPhone is seeing on the nxtgenphone APN. Anyone got any tips?
I'm running Viper 2.5, latest US unlocked firmware and US unlocked selected as carrier, and it works fine on AT&T other than this......only other thing I can mention is when I select preferred band or whatever it shows WCDMA/GSM and if I change it to WCDMA/GSM/LTE it reverts back for some reason. Any help much appreciated. I've called AT&T and they're like, uh, we don't sell the HTC 10 so can't really help you... grrrrrr.....
Click to expand...
Click to collapse
I'd suggest ruu to stock us unlocked rom and see if the issue persists.
Or, try clean flash of viper.
I have no issues using US unlocked on AT&T with both stock rom and ice.
Thanks for trying to help. I just finished trying stock RUU and same problem. I'm convinced, as I was before, that this is AT&T's issue. I've read numerous posts this afternoon that because the HTC 10 (and other phones) aren't in their "LTE approved" database, nxtgenphone APN won't work, or it will only give HSPA speeds. Seems like everyone who has resolved it, or didn't run into the issue at all had another AT&T LTE phone they could use for the IMEI on the account, or the rep entered the model as an iPhone or similar to make it work. Really, really frustrating, as they refuse to help me and I'm starting to think I should just terminate in the 14 day window and do T-mobile or Verizon.
I have at&t and everything worked out of the box, I've never been on stock rom, always on Viper I did the unlock and s-off without a sim and never had an issue or called at&t to activate the device I just transferred my sim from my note 4 to the HTC 10, no provisioning issues at all, VOLTE works, LTE is fine as well while on a phone call... No issues... If you need anything to compare let me know
Sent from my htc_pmewl using XDA Labs
jocarog said:
I have at&t and everything worked out of the box, I've never been on stock rom, always on Viper I did the unlock and s-off without a sim and never had an issue or called at&t to activate the device I just transferred my sim from my note 4 to the HTC 10, no provisioning issues at all, VOLTE works, LTE is fine as well while on a phone call... No issues... If you need anything to compare let me know
Sent from my htc_pmewl using XDA Labs
Click to expand...
Click to collapse
Thanks for replying. They did confirm it was a provisioning issue and they fixed it today. They had to do something different, as the default HTC 10 provisioning and IMEI check didn't fix it even when they tried it a second time, but they were able to adjust something and LTE definitely works now. VoLTE working here, too. Thanks!