Related
Hey guys, I'm having trouble finding any brand left that sell tempered glass for this phone.
The only one I found is XGear, base on the image I am certain that the designed is by having the adhesive stickers on the bezel/edges only, while the viewable area isn't adhesive. I have used tempered glass of similar design before and it is terrible. Since the adhesive stickers are thin on the edges, its not very durable and can leave gaps or pop out (especially since this is a curved screen), and let water in. It will also cause "rainbow effects" due to the gap between the two glasses. There are Amazon reviews that reflected my concern.
I'm looking for something like this which have the entire surface being clear and able to stick.
Doesn't seem like there are any available, but I wouldn't mind using tempered glass for another phone model that could fit on the Nexus screen, I think that's the best way to go. But I won't receive my Nexus in a few days, then I can see if the screen protector of the Moto X fit inside the Galaxy Nexus screen.
Bought a Nillkin Tempered GLass for my Note 3. Guess what.....after a month, the screen cracked by itself! I'm very sure it was not caused by wrong handling nor impact. All this 9H hype by Nillkin is just bull! Choose another brand!
Well I just decided to order a second i-Blason for the Moto X and put it on the Nexus. Kind of awkward, but it work. Couldn't fully stick because of the curved glass though, but the adhesive is durable enough so I'm not worried.
eksasol said:
Well I just decided to order a second i-Blason for the Moto X and put it on the Nexus. Kind of awkward, but it work. Couldn't fully stick because of the curved glass though, but the adhesive is durable enough so I'm not worried.
Click to expand...
Click to collapse
Was gonna buy the xgear thanks for the insight!
Galaxy Nexus
ROM: SlimKat 4.4.2
funny how purchases get based on "user" reviews. i read all 12, and the bad reviews remind of typical users that don't read directions, don't follow directions and then think if they pitch a fit with the manf and bad mouth the product they'll be redeemed of their stupidity.
dust under the screen or lifts at the curve?
1. poor cleaning prior to affixing
2. repeated removing and reapplying and failing 1.
it cracks? really? it's glass, treat it as such and pay attention to 1 & 2 above.
install tip: align and start from one end. it's not a bumper sticker, do not apply it as such.
dots and rainbow? if turned off and angled just right you can see it. turn it on and they're gone. the rainbow kind of reminded of how some windshields look while wearing polarized sunglasses.
i mostly lurk these forums but couldn't let this go. i've had my xgear tempered glass protector on for 2yrs without issue. i will buy more from them if available and my device doesn't have gorilla glass.
well worth the $30+ i spent at the time, has saved my phone too many times to count.
I'm also looking for a tempered glass that is different from Xgear...
I just installed an xGear Fantom (and just replaced my broken screen), I don't see any rainbow effect. I did notice that the protector at the sides sat flat against the screen, but were it curved it bowed out in the center. Looked clear, but definitely was not flush against the glass. I put a thick sock on the screen and some weight over top of it (a thick heavy hard cover book and a medium sized socket set), and that eliminated the bow and put a massive rainbow bubble into the middle of the screen. I lifted the top right corner of the protector slightly and the bubble moved straight out on it's on. It now sits 100% flat. I don't notice any loss of touch sensibility. As far as I can tell, this is going to work well, and last a loooong time.
Sent from my Galaxy Nexus using XDA Free mobile app
xGear Fantom is expensive to me and it has bad critics. I'm trying to find another alternative although it is to another model of mobile with the similar screen's sizes 135.5 x 67.94 mm and the holes fit well. The Moto X's screen seem too small.
I think only xGear makes a tempered glass protector for the G'nex. Might be able to use one for another model, but I don't think it would work any better and you would have a higher chance of running into poor fitment.
But I do understand what your saying - some G'nex have a sensitivity bug that the xGear exaggerates (I'm lucky I don't), while some people have had problems with the glue giving out as well as sensitivity issues not related to the bug.
I'd think you could run into those issues with any brand of glass screen protectors, and further might run into other issues with fitment if the protector is for a different phone.
I can't say if I'll have adhesion issues (and so far nope - but only been barely a week or so since installing it), though I think I would have both if I had not noticed and taken care to eliminate the slight bulge out where the glass curved.
Mine did lay flat at the sides along the protectors boarder, and while it was clear for viewing the screen (as in it didn't look like I had air trapped under the protector), it was clearly bulged out (due to an air pocket) a few mm in the center of the screen where it naturally curves when viewed from the side - I was able to correct that with the weight and slight lifting of a corner.
Sadly, you may want to run your naked (no protector) or with a PET film protector.
Sent from my LG-D852 using XDA Free mobile app
BTW - I only paid something like $11 (Canadian) for my Fantom, and that includes shipping. I don't think it was a huge expense at all.
Sent from my LG-D852 using XDA Free mobile app
I think it's not necessary to use any kind of screen protection.
I have my GNex more than 2 years without using screen protector and it doesn't have any scratches
I bought a tempered glass protector ( Moto X) to my Samsung Galaxy Nexus
Unfortunately I did not find any that fit perfectly but it work rigth to me.... it was very cheap in aliexpress, only 1,60€ :good:
Since there is only a thread for the Nillkin cases and tempered glass I thought it would be nice to have some thread for the accessories in general.
Until this day I tried 3 cases, two screen protectors (films) and two tempered glass protectors.
Case No. 1 ) Slim, silicone case http://www.ebay.com/itm/Transparent-Clear-Silicone-Slim-Gel-Case-For-Huawei-Honor-9/112446352466?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649 - Very slim and light case made from nice silicone BUT the protection when dropped would be none. It's not made 100% precisely and since it's silicone it doesn't look any good on the back where it creates bubbles. I've ordered this as the first case to have at least some protection. Nice thing is they include free screen protector but the quality isn't very good - doesn't cover the whole display (I'm not talking about edge-to-edge) and there are 2mm gaps on each side and when the display is on it looks terrible. 2/5
Case No. 2) Nillkin Super Frosted http://www.ebay.com/itm/For-HUAWEI-Honor-9-NILLKIN-Super-Frosted-Shield-Hard-Plastic-Back-Covers-Cases-/152596952252?var=&hash=item23877cb4bc:m:mtNLCAV-KRHaAK2TUOYLPTg - very nice case, really sturdy BUT I have few complaints - it's kinda slippery on the sides but this will go away after some use maybe and the bottom side around jack, charging port and speaker is a bit sharp and if you're holding the phone with the little finger on the bottom it't not really comfortable. Besides that it's really nice case for the price but I expected a bit more. But once again for the price it's more than OK. 4/5
Case No. 3) TPU Shockproof case with "carbon" http://www.ebay.com/itm/Luxury-Carbon-Fiber-Slim-Shockproof-Soft-TPU-Back-Case-For-Huawei-Honor-9-Magic/112325496837?ssPageName=STRK%3AMEBIDX%3AIT&var=412748326145&_trksid=p2060353.m2749.l2649 - as you can imagine, there is absolutely no carbon at all, just some kind of "sticker" or what it is. Nevermind, this case is the best of the three. Really nice case made from TPU, sturdy, should have the best drop protection and fits just perfectly. There is a small "rim" around the screen that should protect the screen from scratches when the phone is "face down". 5/5
Screen protector (film) No. 1) Nillkin Super Clear Protective Film - in terms of size the best screen protector I've had. Obviously it's not edge-to-edge but it does cover the whole display with gaps on the edges BUT the display is fully protected so thumbs up for me. In terms of "anti-fingerprint" it's nowhere close to the display or the back but is much better than some noname protector I've got with TPU case. Overall very nice screen protector for free but I'm still waiting for the Nillkin H+ tempered glass and some noname edge-to-edge tempered glass. 4/5
Tempered glass No. 1) Edge-to-edge blue 2.5D tempered glass http://www.ebay.com/itm/9H-2-5D-Full-Cover-Real-Tempered-Glass-Screen-Protective-Film-For-Huawei-honor-9/152593109357?ssPageName=STRK%3AMEBIDX%3AIT&var=452016649496&_trksid=p2060353.m2749.l2649 - really nice tempered glass (2 pcs) for the price. It has the adhesive only on the top, bottom and the sides but the application was very easy and the glass holds on even with any of tested cases. It has some "dots" in the screen area so I got no rainbow effect whatsoever. The blue color is a bit different from the original color od the phone but it's not a problem since you have your phone in a case. Overall for the price pretty good. 4/5
Tempered glass No. 2) Normal tempered glass Caliber (bought in CZE) - not edge-to-edge, doesn't cover the whole screen, gaps on the sides. Overall sh*t. 1/5
Still waiting for the Nillkin H+ tempered glass.
Nilkin Amazing H+ Pro is No Go
Got the 0.2mm H+ Pro. It's cover the display area for like 99%, with-out just about 0.5mm on each side, after all still the best.
BUT. The silicon layer doesn't hold the tempered glass on both sides, looks like the phone display curve started a bit earlier than its needed for the protector.
It doesn't stick to the display, making it looks like ****, with 3mm frame from each side. Top/bottom sides stick OK, all the way to edges.
So Nilkin Amazing H+ Pro is No Go for me.
Well, got it yesterday so I'm still waiting to try it but not sure if wan't to :laugh:
cases
sooooo, I bought these from tvc mall. They were so cheap that I bought three different ones with the intent of disposing of whichever were poor. Thing is, they are all good in their own way. The plain bumper is just very slimline. The rugged looking one is cool as it has a stand in landscape mode, and the wallet is exceptional quality, given the price. All three fit perfectly, but the plain bumper makes the power and volume buttons so much more tactile. The rugged one looks really cheap in silver, perhaps black would have been a good choice. As i wasn't expecting much from the wallet one, I also oredered the nilkin wallet but that hasn't arrived yet.
https://www.tvc-mall.com/details/dr...r-9-auspicious-dragon-black-sku10174840d.html
https://www.tvc-mall.com/details/fo...casing-with-kickstand-black-sku10174919a.html
https://www.tvc-mall.com/details/ma...ot-for-huawei-honor-9-black-sku10175044a.html
https://www.tvc-mall.com/details/ni...se-for-huawei-honor-9-black-sku10174916a.html
I have also ordered the ultimate sheild screen protector, which is edge to edge, in black as I think it will make an excellent contrast to the silver rear of the handset....which wont be visible when the (absolutely necessary) bumper is fitted!
Ultimate sheild screen protector
.... And the ultimate sheild protector turned up. It is excellent. A word of caution, unless this is fitted absolutely perfectly, it will render one or both of the capacitance keys inoperable. This happened to me as i fitted the sheild a fraction of a millimetre to the right. I carefully removed and replaced it with more accuracy.
Here is a pic of the black sheild fitted to my silver H9, and a photo of the plain bumper fitted from my previous post. Svelt but rugged!
After a couple of hours of use I can say that there has been no loss of sensitivity on the screen or capacitive buttons, but on darker details and the blacks, it does look like the screen is behind a sheet of glass. You will know what i mean if you have used a screen protector which bonds over its entirety, whereas this one has a mild adhesive at the top and bottom of the protector, where the bezels are. A small price to pay i think to protect my new device. It is mostly noticeable in bright light, not so much in low light. And I love the new black look of the bezels with the silver fingerprint sensor still visible.
Right, so, some more hours on....the ultimate sheild has begun to show its flaws. Towards the middle of the screen there is now what i can only describe as a "woodgrain" effect. This could be caused by tiny amounts of moisture getting between the screen and protector, which I guess there is nothing to stop that happening. They offered a refund for dissatisfaction so I guess I will be chasing that up. Pfffft. So disappointed.....
Is there a smart cover for it ?!
Just bought the TPU Shockproof case and it is amazing! It's a very good quality and it doesn't makes the phone feel like a toy.
I really like it and definitely recommend it!
NotoriousNick said:
Just bought the TPU Shockproof case and it is amazing! It's a very good quality and it doesn't makes the phone feel like a toy.
I really like it and definitely recommend it!
Click to expand...
Click to collapse
Can you upload a photo of the phone with the case applied?! That would be awesome
The nilkin "sparkle series" wallet turned up. Its awful. Unlike the cheap wallet I purchased, which remains closed under magnetism, the nilkin just falls open and feels poorer quality.
The Ipaky bumper with the clear perspex back is, however, very nice. The only caveat, it sits flush with the screen so offers no protection if you decide to place your device screen down.
I'm waiting for the smart cover case, if it didn't come fast, I'll go with a skin.
I have bought an honor 9 few days ago. Somebody could suggest me a screen protector that cover whole display? With 3D display is so difficult find a good screen protector....
danygold95 said:
I have bought an honor 9 few days ago. Somebody could suggest me a screen protector that cover whole display? With 3D display is so difficult find a good screen protector....
Click to expand...
Click to collapse
Here you go
https://www.ultimateshield.co.uk/collections/honor-9
PalakMi said:
Here you go
https://www.ultimateshield.co.uk/collections/honor-9
Click to expand...
Click to collapse
Thanks.
I don't like this type of tempered glass (i know that is the only solution for cover 3d display without space).
So, someone has tested "invisible film screen protector"?
danygold95 said:
Thanks.
I don't like this type of tempered glass (i know that is the only solution for cover 3d display without space).
So, someone has tested "invisible film screen protector"?
Click to expand...
Click to collapse
I didn't test, I will try it once I get my honor 9
PalakMi said:
I didn't test, I will try it once I get my honor 9
Click to expand...
Click to collapse
:good:
If someone else has tried this protective film, please give us a feedback.
Did someone try the Mofi screen protector? According to a review on Aliexpress it has minimal space at both sides.
I've seen ones from ultimate shield, I'm considering getting one.
PalakMi said:
I've seen ones from ultimate shield, I'm considering getting one.
Click to expand...
Click to collapse
Good luck with that. Did you read my earlier post? As the protector does not actually sit on the screen, due to the adhesive around the edges, it is susceptible to the "rainbow effect" which i think is caused by humidity between screen and protector. It seemed to manifest itself after the phone had been in my pocket and warmed up. I don't have an overly sweaty crotch.....
Anyhow, they apologised and promptly sent a replacement and the same happened again.
By all means give it a go and they will refund you without issue.
This is one slippery mofo. Any skins out there? Less than 24 hours and this thing keeps slipping off what I thought were flat level surfaces. If I set it flat on the palm of my hand or on a newspaper on a table, I can watch it slowly inch its way to its doom.
I hate to admit I fell for this line from LG:
MIL-STD-810G Method 516.6, Procedure IV “Transit Drop”)Shock Resistant
Compliant with a military standards test (MIL-STD-810G Method 516.6, Procedure IV “Transit Drop”). Device may not perform as tested in all conditions. Test performed in controlled environment. Do not attempt.
Click to expand...
Click to collapse
But if you actually look up what this means... you see its pure and simple marketing buII**** as your "controlled environment" can consist of a careful 4 foot drop onto plywood.
So yes.. skins to keep this thing from slipping are needed.
I ordered the Invisible Phone Guard front/back and will show how it works here when it is received. ATT was supposed to give me a screen protector.
I attached a picture to show what happened here. This is from 2 or 3 falls only 2'5" drop onto a laminate floor. The scratches cannot be seen without good light and the photos were taken using a DSLR and macro lens.. so it isn't terrible, but rest assured this has weakened the gorilla glass and the front screen will eventually shatter if it keeps jumping off tables.
From dbrand
Robot 077 (dbrand)
Apr 13, 15:55 EDT
Hey ######!
Thanks for reaching out. Unfortunately, we have no plans to support the LG G8 ThinQ, as there is simply not enough demand to justify adding it to our portfolio at this time. Sorry about that. Let us know if there is anything else we can help with, and have a great day!
Signed,
A Robot
Click to expand...
Click to collapse
screen protector
https://www.youtube.com/watch?v=9EDYQG6Q7JY
i found this to be a good review of the BodyGuardz Pure Arc Curved Tempered Glass Screen Protector for the G8 ThinQ
i thought it was a shill channel looking at other reviews, but he seems to hate this. it fits GREAT, but only has adhesives on the sides and has a visible dot matrix.
on top of that, he says there is an unnatural hollow feel to it due to the adhesive not being full screen. i imagine this will negatively affect the oled speaker.
this is a $50 screen protector that AT&T is giving away as a part of a promotion.
skins... not much out there and only dbrand has responded (with a NEVER).
the Invisible Phone Guard screen protector was OK and visibility was good, but i found the sound to be very slightly muffled as if it is dampening a certain high frequency.
i'm keeping the back on until i find a decent skin.
this film seems like it will blemish easily. it certainly gets dirty easily. pics here...
Having this phone for a few days now and the OP was not lying about how slippery this phone is. A case or skin is a definite must have!
Ordered a Ringke Fusion X.
Sent from my LM-G820 using Tapatalk
I ordered this case - https://www.ebay.com/itm/273759783563 - I should be getting it later today, I'll post about how well it works.
No sooner did I post this than it came in the mail. Fits on easy, stays on snugly. It's matte rubber without feeling like you're holding a car tire. I had one for my Nexus 6P I really liked and this feels equally good.
This thing is indeed incredibly slippery. I think I'm just going to be extra careful about where I put it down (it's not too slippery in my hands I find, just on certain surfaces), I hate hiding the slick design of the phone with a case. This is also the first phone I've had in a very long time where the camera doesn't bulge out the back, which I really appreciate and don't want to diminish with a case.
doblebo said:
This is one slippery mofo. Any skins out there? Less than 24 hours and this thing keeps slipping off what I thought were flat level surfaces. If I set it flat on the palm of my hand or on a newspaper on a table, I can watch it slowly inch its way to its doom.
I hate to admit I fell for this line from LG:
But if you actually look up what this means... you see its pure and simple marketing buII**** as your "controlled environment" can consist of a careful 4 foot drop onto plywood.
So yes.. skins to keep this thing from slipping are needed.
I ordered the Invisible Phone Guard front/back and will show how it works here when it is received. ATT was supposed to give me a screen protector.
I attached a picture to show what happened here. This is from 2 or 3 falls only 2'5" drop onto a laminate floor. The scratches cannot be seen without good light and the photos were taken using a DSLR and macro lens.. so it isn't terrible, but rest assured this has weakened the gorilla glass and the front screen will eventually shatter if it keeps jumping off tables.
Click to expand...
Click to collapse
Well there are a number of skins now at the varies skin sites though I personally skipped them and simply put the phone into an Otterbox Defender case.
I used a cheap curved glass screen protector ( was like $9) and some loca glue (like $10) to make a DIY full adhesive whitestone kit.
hey everyone - just got my lg g8 a few days ago. i got my case and glass screen protector yesterday. in my head i feel like maybe the screen protector is 'muting' the sound from the screen. has anyone else noticed this, or is it just in my head?
stamos*bp said:
hey everyone - just got my lg g8 a few days ago. i got my case and glass screen protector yesterday. in my head i feel like maybe the screen protector is 'muting' the sound from the screen. has anyone else noticed this, or is it just in my head?
Click to expand...
Click to collapse
I have not had that issue and I am using a Supershieldz screen protector however my brother who is using an Iphone 7 recently had that issue with one due to a screen protector he picked up at Walmart though it resolved once he removed it.
It's amazing to watch this phone slowly creep off of my wireless charger, which has a rubbery grippy surface! My case arrives today...
I'm using slickwraps for the back of my phone and I like it. I would say they are slightly less precise than dbrand, but still great quality. If people would like photos, please let me know.
I'm using a Nillkin slim case, adds no bulk and provides some grippiness.
I also have a Spigen Crystal Clear gel case that's very nice, but is more bulky than the Nillkin.
As for screen protectors, i've found that glass ones are useless for this phone. I tried a couple full adhesive brands with the idea that i would fill the little gap on the edges with LOCA but of the 6 protectors that i applied, they all had a problem sticking fully in some flat areas of the screen. It was always the exact same spots so I came to the conclusion that the LG screen itself isn't 100% flat in those areas so I settled on the Ringke Dual Easy Film screen protector.
Huge Thanks!
Weston
You may want to think about giving the Skinomi Full Body Skin a try. It definitely keeps my phone from slipping off of surfaces, giving the phone a bit of a plastic-rubber feel while still letting the beauty of the phone show through. The back protector doesn't interfere with any cases and offers a bit of mental relief for those times you want to carry your phone without a case.
Dude, I had my g8 for 2 days. Was in. The washroom and the phone was on a roll of toilet paper (the flat side, obviously haha) and got a notification. Before I knew it the phone slid off and landed on the bottom right corner, heard an alarming "tink" sound but didn't think anything of it. A few mins later I saw a small crack, then I looked again and realized that there were multiple cracks on the screen. Ended up getting it replaced by my carrier, I said it was damaged in shipping. Point is that this phone is a glass cannon: it's very powerful for specs but it will have a broken screen if you sneeze on it the wrong way. This is one of the massive downsides to the new gorilla glass. Sure it's scratch resistant but with the wrong amount of pressure it will get destroyed :/
doblebo said:
This is one slippery mofo. Any skins out there? Less than 24 hours and this thing keeps slipping off what I thought were flat level surfaces. If I set it flat on the palm of my hand or on a newspaper on a table, I can watch it slowly inch its way to its doom.
I hate to admit I fell for this line from LG:
But if you actually look up what this means... you see its pure and simple marketing buII**** as your "controlled environment" can consist of a careful 4 foot drop onto plywood.
So yes.. skins to keep this thing from slipping are needed.
I ordered the Invisible Phone Guard front/back and will show how it works here when it is received. ATT was supposed to give me a screen protector.
I attached a picture to show what happened here. This is from 2 or 3 falls only 2'5" drop onto a laminate floor. The scratches cannot be seen without good light and the photos were taken using a DSLR and macro lens.. so it isn't terrible, but rest assured this has weakened the gorilla glass and the front screen will eventually shatter if it keeps jumping off tables.
Click to expand...
Click to collapse
I've dropped this thing so many times because it's so slippery. Seems like every other week I hear it jump off a table a few minutes after I leave the room.
I have a crack on 3 corners, but nothing across the screen. My case (which I tend to take off when connecting it to things such as controllers or some USB cables) almost hides the cracks.
However, these are more like small missing chunks of glass on the corners. I've never had such a fragile phone. I tried super glue on the corners to keep it from spreading, but eventually just went to town on the corners with silicone conformal coating that I had sitting around. It seems to be working great and keeps the little shards coated and sort of glued in there. I kind of prefer this to replacing the screen as replacements have only gone down slightly to around $150 shipped from China and I know I'll just end up breaking that one.
There's always been one or two deal breakers with all of my LG phones and that's why I kept going to a different manufacturer as soon as I could. I hate to say it but after this, I'm never going back to LG again no matter what cool unique feature they're wooing me with.
I basically used this phone with a broken screen for 5 months. Replacements are still $150 (better than $200 back when it broke). It dropped approximately 1.5ft face down onto a clay tile floor and front screen has cracks all over. It almost looks somewhat inverted now as if the screen was designed to have tension. Well I went and got a note 10+ and man it is great to have a real phone again. Doesn't have some of the edgy LG stuff that I really loved and theres no headphone jack... but bigger/brighter screen that isn't broken is so nice to have. Good luck with your screens guys.... I'll replace mine when the price is reasonable and either go back to using it or put it on ebay.
Jaa-Yoo said:
I'm using a Nillkin slim case, adds no bulk and provides some grippiness.
I also have a Spigen Crystal Clear gel case that's very nice, but is more bulky than the Nillkin.
As for screen protectors, i've found that glass ones are useless for this phone. I tried a couple full adhesive brands with the idea that i would fill the little gap on the edges with LOCA but of the 6 protectors that i applied, they all had a problem sticking fully in some flat areas of the screen. It was always the exact same spots so I came to the conclusion that the LG screen itself isn't 100% flat in those areas so I settled on the Ringke Dual Easy Film screen protector.
Click to expand...
Click to collapse
I have reached the same conclusion about the screen not being flat enough to utilize a hard glass protector even if you avoid the very curved edge portions. I tried the curved, glued only on the edge types first but that always had a weird optical effect and wasn't very ruggedly glued on, none in the middle. Why? I haven't tried using whitestone glue yet.
So the suggested one sounds interesting. https://www.amazon.com/Ringke-Compa...dge-Application/dp/B07NHMBNLH#customerReviews
I think I'll watch the videos first.
I also found these but yes a firm, solid piece of glass is a no go IMHO. Not a fan of these new case designs for all the new phones. Why de do dat?
https://www.amazon.com/dp/B07QQD2BCG/ref=cm_sw_r_cp_apa_i_MkrHDb48GTKZN
https://www.amazon.com/gp/product/B07QB9MN28/
Still hoping for a solution. I had great luck with Spigen Crystal screen protector SGP10855 for my LG G3 which is hard but I believe would be flexible enough if it skipped the curved edges but they don't make anything like that?
UPDATE: After watching the LG G8 video on YouTube I decided to go with the Rinke.
I'll report back. This will be 4th type attempted.
I put it on this morning. It is pretty easy to get this on with good alignment and no bubbles.
Two things.
1. If you watch the YouTube instructions the place where the dust dust cleaning sticky backing splits in half does leave a slightly perceptable crease in the soft protector. Maybe it will smooth out with time? It did not with the squeegee.
2. It's soft so you can possibly nick with your fingernails and it's also easy to lift an edge ever so slightly during final finishing so be careful.
I see no installation flaws but it also isn't a hard glass but then those do not install properly even when undersized because the screen is not level as you get near the edges as far as 1/4" away. The film eliminates this issue but will it protect and stay on.
We shall see.
I sell a lot of these devices and it is even hard to photograph them on a smooth surface because they will start around on my table. Put it in a case, the screens are expensive.
to share my very pleasant surprise.
TOCOL plastic screen protector for Note 10, TOCOL [3 Pack] for Samsung Galaxy Note 10 Screen Protector
I have been using almost exclusively glass protector up to now, but tired of the problem with curved screen. TOCOL really worked out.
The quality is very good. the right among of rigidity that feels solid when touching or using stylus, but also gives a bit of yielding and friction as if writing on paper. It holds up very well too, after a month, there has not been a single visible scratch. The adhesion is excellent without any delamination on edge. even once that I accidentally peeling it off when popping phone out of case, was able fully press protector back on without problem.
It also has a new (at least to me) a great idea of how it is applied... you get to see the description/video. by having a leading rigid edge to "sweep" the screen as it is applied, you won't have problem of small dust remaining on screen or misalignment anymore. quite brilliant.
and it is cheap...
How's the fingerprint
and how bad is the orange peel effect?
I've used Screen Knight protectors on all of my recent phones. Search on eBay costs around £4-5 depending on model.
It conforms perfectly to the curved screen, and is applied using water so you get a perfect screen with no chance of it being squint or getting debris underneath.
Fingerprint and screen sensitivity are unaffected. You wouldn't know it was on the phone.
My last one lasted 2 years and was literally unmarked.
Easy to remove to sell phone. Highly recommended for a phone with curved screen.
Prof Peach said:
I've used Screen Knight protectors on all of my recent phones. Search on eBay costs around £4-5 depending on model.
It conforms perfectly to the curved screen, and is applied using water so you get a perfect screen with no chance of it being squint or getting debris underneath.
Fingerprint and screen sensitivity are unaffected. You wouldn't know it was on the phone.
My last one lasted 2 years and was literally unmarked.
Easy to remove to sell phone. Highly recommended for a phone with curved screen.
Click to expand...
Click to collapse
Did the spen lead marks
There's been a lot of discussion about the screen protector on this phone. Removing it, not removing it, replacing it, etc. I bought my ZF2 second hand, and the previous owner had already removed the factory screen protector, so part of that decision had been made for me. He had replaced it with a matte screen protector, inside and out.
Honestly, I TRIED to get used to it. I WANTED to like it. It felt nice and there were no fingerprints. But if you watched a movie, it looked like an 80s VHS bootleg copy.
So I removed the screen protector and could instantly tell why people love this phone naked. The screen is genuinely beautiful. But I just can't take a chance at scratching it, so I replaced both screen protectors with the Gobukee screen protector.
https://www.amazon.com/dp/B08KRXVXFT/ref=cm_sw_r_cp_apa_fabc_EiwZFb0ZWH70Z?_encoding=UTF8&psc=1
Installation is a dry installation, and is very similar to the Ringke Easy Dual screen protectors, but instead of the whole thing being sticky, there's only a strip that sticky to align it. I actually prefer the Ringke method, as it removes dust on the whole screen as you align it, but fortunately I didn't have any dust issues with these when installing.
Like all dry install TPU screen protectors, I had some bubbles after installation, but after 24 hours they were all gone, and I was left with a perfectly clear and smooth surface. Maybe not as smooth as glass, but it's very, very close. I'm not sure if I would be able to tell the difference between this and bare glass.
It's still a bit of a fingerprint magnet, but comparing it to the demo unit at Best Buy, which still has the factory screen protector, this one is MUCH better at repelling fingerprints. And it seems easier to clean as well. And it definitely feels much better.
As a bonus to an interior and exterior screen protector, it includes a skin for the back glass and the hinge. The hinge skin is just almost invisible once installed and doesn't affect the folding action at all. I haven't used the rear skin, as the previous owner installed a matte rear skin, which I actually prefer on the back glass.
If you're on the fence about removing your screen protector, because the factory one is terrible, but you still want protection, I can highly recommend the Gobukee screen protector.
This was NOT a paid/sponsored review. I just wanted to share my experience and hopefully help others.
When this screen protector wears out, I will likely try the Ozero, since it gets pretty decent reviews.
With you on this one...just installed the front and inside and they are way better than the factory installed ones and are not at all rubbery like the factory. I loved not having the screen protector on but these are as close to not having in on there as possible.
imapfsr said:
With you on this one...just installed the front and inside and they are way better than the factory installed ones and are not at all rubbery like the factory. I loved not having the screen protector on but these are as close to not having in on there as possible.
Click to expand...
Click to collapse
I agree. I really like it. I've been using these TPU protectors for a while on my other devices. I've used them on the S10+, Note 10+, Note 20 Ultra, and now this device. I usually use the Ringke Easy Dual protector, but it's not available on the fold yet. But I'm convinced they're all mostly the same, just different brand and packaging.
I bought this screen protector for my fold but unfortunately my experience of it was poor. Its a shame as the install went perfectly because unlike two other brands I tried, the Gobukee is actually designed specially with the Fold in mind. What I mean by that is the two halves you remove before the protector sticks to the screen (as in tab 2 and 3) run parallel to the fold crease. This means you can push the squeegee and therefore the protector into the crease.
Honestly, the install was great and I was thrilled to finally find a protector for this device that wasn't poor. Unfortunately my hype was short lived as after having the device folded for 5 minutes, the protector developed a clear band of purple and green tinting where the crease is. You'll have to excuse the poor picture quality as I only had my work iPhone 7 to hand.
Did you not experience this?
Mekrel said:
I bought this screen protector for my fold but unfortunately my experience of it was poor. Its a shame as the install went perfectly because unlike two other brands I tried, the Gobukee is actually designed specially with the Fold in mind. What I mean by that is the two halves you remove before the protector sticks to the screen (as in tab 2 and 3) run parallel to the fold crease. This means you can push the squeegee and therefore the protector into the crease.
Honestly, the install was great and I was thrilled to finally find a protector for this device that wasn't poor. Unfortunately my hype was short lived as after having the device folded for 5 minutes, the protector developed a clear band of purple and green tinting where the crease is. You'll have to excuse the poor picture quality as I only had my work iPhone 7 to hand.
Did you not experience this?
Click to expand...
Click to collapse
Not at all. I literary can't tell the protector is there.
Plus, mine didn't split parallel the fold, it actually split perpendicular to it. Also mine has a hole punchout for the camera. Either you're using a different brand, or a different iteration of it.
On mine, you removed the back sheet, which exposed a slightly sticky strip on the screen protector that ran left to right and was located in the upper half of the protector, if I recall correctly.
Once it was aligned, you removed a second bottom layer, exposing the real screen protector adhesive. This was done in two halves as you said, but the splet ran side to side, not up and down like the screen fold.
Step one was
Mekrel said:
I bought this screen protector for my fold but unfortunately my experience of it was poor. Its a shame as the install went perfectly because unlike two other brands I tried, the Gobukee is actually designed specially with the Fold in mind. What I mean by that is the two halves you remove before the protector sticks to the screen (as in tab 2 and 3) run parallel to the fold crease. This means you can push the squeegee and therefore the protector into the crease.
Honestly, the install was great and I was thrilled to finally find a protector for this device that wasn't poor. Unfortunately my hype was short lived as after having the device folded for 5 minutes, the protector developed a clear band of purple and green tinting where the crease is. You'll have to excuse the poor picture quality as I only had my work iPhone 7 to hand.
Did you not experience this?
Click to expand...
Click to collapse
Wait... You did remember to remove the TOP layer after install, correct?
Mr. Orange 645 said:
Wait... You did remember to remove the TOP layer after install, correct?
Click to expand...
Click to collapse
Thanks for your detailed response and I'm glad to hear you achieved a good install, as you say, it appears that this brand has different variations. Here's the link to the one I bought - you'll see from the pictures in the listing that there's an adhesive column that sticks into and parallel to the crease.
I did indeed remove the top layer, as you say, after removing said top layer it was hard to even see there was a protector installed.
I've even looked on Amazon UK for other listings for the Gobukee protector and came across one that at first, looked similar to the listing you linked to in regards to it having images of the packing which the listing I originally bought from didn't. However, that listing then also shows the protectors that look to install the same way as the original one I bought (adhesive strip running parallel to the fold). There was also a review that said a rainbow effect appeared but clicking on that to read more of the review took me to a completely different and positive review.
I've also tried the Newzerol and Miimall protectors but these are the same protector but in different packaging. These do two halves that run perpendicular to the crease but the biggest issue I had with these was they showed lines left by the squeegee, even days after the install which is strange considering how delicate I am when applying them to such a delicate device.
Edit - okay, so I've ordered the second one I linked to because the listing seems different enough to hope I get one line yours. As you pointed out, my original one did not have a cut out for the camera and this is reflected in the two listings - one shows no cut out, the other does. Perhaps they revised the product after feedback about the fold issue and also added a cut out? I'll update the thread with how I get on.
Mekrel said:
Thanks for your detailed response and I'm glad to hear you achieved a good install, as you say, it appears that this brand has different variations. Here's the link to the one I bought - you'll see from the pictures in the listing that there's an adhesive column that sticks into and parallel to the crease.
I did indeed remove the top layer, as you say, after removing said top layer it was hard to even see there was a protector installed.
I've even looked on Amazon UK for other listings for the Gobukee protector and came across one that at first, looked similar to the listing you linked to in regards to it having images of the packing which the listing I originally bought from didn't. However, that listing then also shows the protectors that look to install the same way as the original one I bought (adhesive strip running parallel to the fold). There was also a review that said a rainbow effect appeared but clicking on that to read more of the review took me to a completely different and positive review.
I've also tried the Newzerol and Miimall protectors but these are the same protector but in different packaging. These do two halves that run perpendicular to the crease but the biggest issue I had with these was they showed lines left by the squeegee, even days after the install which is strange considering how delicate I am when applying them to such a delicate device.
Edit - okay, so I've ordered the second one I linked to because the listing seems different enough to hope I get one line yours. As you pointed out, my original one did not have a cut out for the camera and this is reflected in the two listings - one shows no cut out, the other does. Perhaps they revised the product after feedback about the fold issue and also added a cut out? I'll update the thread with how I get on.
Click to expand...
Click to collapse
Yeah, the listing for the one I bought shows the hole cut out. But when I look at the UK listing it doesn't. That's weird. Doesn't make sense to make different variants for the UK.
Now, I do have faint lines from the squeegee. But you have look at you screen at an extreme angle, and get a light to reflect right on them to see them. I don't know if I could even photograph them.
Let me. Know how the second order goes. I'm genuinely curious.
Okay so the screen protector came today and wow, I'm extremely impressed and very happy that I now have a screen protector on this device.
This Gobukee protector was very much different than the first one I bought from Amazon UK (so there's two different variations on the same Amazon UK store), in the following ways:
The protector comes with a hole punch for the camera for the inner, large display
The install method is different, essentially this display protector anchors at the top near the selfie camera
The install went really well, initially I was left with a fair few bubbles around the crease but these disappeared after 30 mins of trying to work them out with the squeegee and leaving it for an hour open.
You'll see from my pictures that you can't tell there's a protector on at all and it feels much better than the stock protector that comes in the device. Also, unlike the original Gobukee protector, no rainbow discolouration where the device folds.
I wouldn't dare not use a protector on either display on this device. Even with Gorilla glass Victus on the front and not putting this device in any pocket with items that could scratch the display, the front display has picked up some very faint hairline scratches. Not a big deal as you really need to look for them at the right lighting angle to see them but if the front display can scratch then the inside display definitely can. Plus dust and debris can easily get to the inside screen due to the large gap between the two halves near the hinge.
So Mr. Orange 465, thanks for bringing this protector to my attention and leading me to discover there were different versions doing the rounds.
Mekrel said:
Okay so the screen protector came today and wow, I'm extremely impressed and very happy that I now have a screen protector on this device.
This Gobukee protector was very much different than the first one I bought from Amazon UK (so there's two different variations on the same Amazon UK store), in the following ways:
The protector comes with a hole punch for the camera for the inner, large display
The install method is different, essentially this display protector anchors at the top near the selfie camera
The install went really well, initially I was left with a fair few bubbles around the crease but these disappeared after 30 mins of trying to work them out with the squeegee and leaving it for an hour open.
You'll see from my pictures that you can't tell there's a protector on at all and it feels much better than the stock protector that comes in the device. Also, unlike the original Gobukee protector, no rainbow discolouration where the device folds.
I wouldn't dare not use a protector on either display on this device. Even with Gorilla glass Victus on the front and not putting this device in any pocket with items that could scratch the display, the front display has picked up some very faint hairline scratches. Not a big deal as you really need to look for them at the right lighting angle to see them but if the front display can scratch then the inside display definitely can. Plus dust and debris can easily get to the inside screen due to the large gap between the two halves near the hinge.
So Mr. Orange 465, thanks for bringing this protector to my attention and leading me to discover there were different versions doing the rounds.
Click to expand...
Click to collapse
Awesome!! I'm glad you found one that works!!
I just installed the Ozero about five days ago. I noticed yesterday that it was starting to peel up on the edges right at the crease. Planned to change it out this weekend. Then today I opened the phone and the Orzero completely let go at the crease. From top to bottom it came loose from the screen. I'll try to post a pic tonight of it when I'm home and have access to my other phone.
I'll try the other Ozero screen protector I have and hope this was a fluke, since I love how smooth these feel, but if the next one lets go like this one, I'll go back to Gobukee. I never had an issue with them.
Got so tired of the crappy internal screen protector and finally (hesitantly) removed it and replaced it with the healing shield matte screen protector from Amazon. The install went flawlessly outside of a few bubbles on the edges which hopefully go away in the next couple days. It's such a night and day difference. Before I avoided using the large screen cause I hated the feeling of it and OH MAN all those fingerprints.....now, although the screen isn't as sharp, it still looks great to me and is silky smooth AND no fingerprints anywhere. I know there have been a lot of complaints about it lifting after a couple days or weeks so I'll be cautious, but for now I love it.
Hi, any updates on this screen protector? Any bubbles appeared along the crease or corners etc? Thanks...
I just tried put this screen protector. It does bubble slightly from the top of the crease when open.....sometimes. sometimes I'll open it and it's fine. However this is much better than many of the other clear protectors I've tried. Seems slicker and more scratch resistant than the others as well to me. I'm actually going protector free for a little while and see how I like it. I think I've tried 8 or 9 screen protectors now. I'm more partial to the matte ones for fingerprint reasons.
jmpcrx said:
Hi, any updates on this screen protector? Any bubbles appeared along the crease or corners etc? Thanks...
Click to expand...
Click to collapse
No bubbles or peeling at all. I actually removed it to try the Ozero brand screen protector, but that one actually would shrink on really cold days, and would come completely loose at the fold when opening.
So I switched back to Gobukee and haven't had any issues at all. Best screen protector out there, in my opinion.
Mr. Orange 645 said:
No bubbles or peeling at all. I actually removed it to try the Ozero brand screen protector, but that one actually would shrink on really cold days, and would come completely loose at the fold when opening.
So I switched back to Gobukee and haven't had any issues at all. Best screen protector out there, in my opinion.
Click to expand...
Click to collapse
Thanks for the reply... I'm guessing the rear screen protector, if it has one, doesn't actually fit the whole of the rear? Thanks .. trying to find k e that covers all the rear of the phone (other than the camera)..
Can anyone provide some new links for the screen protectors, this ones are not available. I need to replace my interior screen but the ones i see are not so good
Yeah can anyone prov
Mekrel said:
Okay so the screen protector came today and wow, I'm extremely impressed and very happy that I now have a screen protector on this device.
This Gobukee protector was very much different than the first one I bought from Amazon UK (so there's two different variations on the same Amazon UK store), in the following ways:
The protector comes with a hole punch for the camera for the inner, large display
The install method is different, essentially this display protector anchors at the top near the selfie camera
The install went really well, initially I was left with a fair few bubbles around the crease but these disappeared after 30 mins of trying to work them out with the squeegee and leaving it for an hour open.
You'll see from my pictures that you can't tell there's a protector on at all and it feels much better than the stock protector that comes in the device. Also, unlike the original Gobukee protector, no rainbow discolouration where the device folds.
I wouldn't dare not use a protector on either display on this device. Even with Gorilla glass Victus on the front and not putting this device in any pocket with items that could scratch the display, the front display has picked up some very faint hairline scratches. Not a big deal as you really need to look for them at the right lighting angle to see them but if the front display can scratch then the inside display definitely can. Plus dust and debris can easily get to the inside screen due to the large gap between the two halves near the hinge.
So Mr. Orange 465, thanks for bringing this protector to my attention and leading me to discover there were different versions doing the rounds.
Click to expand...
Click to collapse
Hi, please could you provide a link to the version that works for you in the UK.
I'm looking to add a screen protector to the inside screen and haven't found a decent one yet